Sanyo PLC-XU73 инструкция обслуживания

Multimedia Pr oject or MODEL PLC-XU73 PLC-XU70 Owner ’ s Manual[...]

2 F eatures and Design ◆ Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. ◆ Compatibility The projector widely accepts various video and computer input signals including; Computers, 6 Color systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N), Component video, S-Video and[...]

3 T able of Contents Tr ademar ks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. F eat ur es and Design . . . . . . . . . . . . . . . . . . .2 T able of Contents . . . . . . . . . . . . . . . . . . . . . .3 To the Owner . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 To the Owner CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE [...]

5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m[...]

6 Safety Instructions USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause dam[...]

7 AC Po wer Cord f or the Unit ed Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the plug with the [...]

8 Bot t om Bac k q Infrared Remote Receiver w Zoom Ring e Projection Lens r Focus Ring t Lens Cover (See page 50 for attaching.) y Top Controls and Indicators u Speaker i Air Intake Vent o Power Cord Connector !0 Terminals and Connectors !1 Lamp Cover !2 Air Intake Vents (back and bottom) !3 Air Filters !4 Adjustable Feet !5 Exhaust Vents !5 y !4 ![...]

9 Pa rt Names and Functions RESET button A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively. Rear T er minal S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTE[...]

10 Pa rt Names and Functions ON - OFF POWER KEYSTONE INPUT W ARNING LAMP REPLACE MENU - VOLUME + VOLUME SELECT q w e t u i o u LAMP REPLACE indicator Turn yellow when the life of the projection lamp draws to an end. (p52, 58) y WARNING indicator Emit a red light when the projector detects abnormal condition. This also blinks red when the internal t[...]

11 Pa rt Names and Functions To ensure safe operation, please observe the following precautions : – Do not bend, drop the remote control or expose the remote control to moisture or heat. – For cleaning, use soft dry cloth. Do not apply benzene, thinner, splay or any chemical material. t e !0 i !4 r !5 !3 q POWER ON-OFF button Turn the projector[...]

12 Pa rt Names and Functions 1 2 3 To insure safe operation, please observe the following precautions: ● Use (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control to moisture or heat. ● Do not dro[...]

13 ✔ Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • The values shown below are approximate and may vary from the actual sizes. P ositioning the Pr oject or Installation 100 150 200 300 250 166 126 83 40 A B 43.3' (13.2m) 23.9&ap[...]

14 NO TE ON THE POWER CORD AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer. To power cord connector on your projector. Pr ojector side AC outlet side [...]

15 Installation Connecting t o a Comput er ON ON S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Cables used for connection • VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.) •USB Cable ✽ • Audio Cables (Mini Plug: s[...]

16 S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Installation Connecting t o V ideo Equipment Cables used for connection • Video and Audio Cable (RCA x 3) ✽ • S-VIDEO Cable ✽ • Audio Cable (Mini Plug: stereo) ✽ ( ✽ = Not[...]

17 Installation Connecting t o Component V ideo Equipment S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Cables used for connection • Audio Cables (Mini Plug :stereo) ✽ • Scart-VGA Cable ✽ • Component Cable ✽ • Component-[...]

18 Connect the projector's AC power cord into an AC outlet. The POWER indicator will be red. Press the POWER ON-OFF button on the top control or on the remote control. The POWER indicator will become green and the cooling fans will start to operate. The preparation display will appear on the screen and the count down will start. 2 3 1 16 The p[...]

19 Basic Oper ation Press the POWER ON-OFF button on the top control or on the remote control, and a message "Power off?" will appear on the screen. Press the POWER ON-OFF button again to turn off the projector. The POWER indicator will start to blink red, and the cooling fans will keep operating. (You can select the level of fun quietnes[...]

20 Basic Oper ation ON - OFF POWER KEYSTO NE INPUT W ARNING LAMP RE P MENU - VOLUME + V OLU SELECT Top Control Menu bar Pointer (red framed ) Menu icon Item data Press the Point 7 8 buttons to adjust the value. SELECT button Pointer (red framed ) Press the Point ed buttons to move the pointer. Item Ho w t o Oper at e the On-Scr een Menu MENU button[...]

21 Basic Oper ation Menu Bar PC Syst em Menu Used to select computer system. (p26) Image A djust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Sharpness / Gamma] (p31, 32) Set ting Menu Used to set the projector's operating configurations. (p41-48) Sound Menu Used to adjust the volume or mut[...]

22 Basic Oper ation Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the projected picture focus. Zoom Ring (Rear) Focus Ring (Front) • The arrows are white when there is no correction. • The direction of the arrow being corrected turns red. • The arrows disappear at the maximum correction. • If you press the KEYSTON[...]

23 Basic Oper ation Remote Control Remot e Contr ol Oper ation For some frequently used operations, using the remote control is advisable. Just pressing one of the buttons enables you to make the operation, and no need for calling up the On-Screen Menu. COMPUTER /VIDEO button ✔ Note: • See the next page for the other buttons. Press the FREEZE b[...]

24 Basic Oper ation Remote Control D.ZOOM buttons NO SHOW button AUTO PC button ✔ Note: • See the previous page for the other buttons. KEYSTONE button (See p22) POINT ed buttons black out ➜ the captured image ➜ normal ➜ • • • • • Press the NO SHOW button on the remote control to black out the image. To restore to normal, press t[...]

25 Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red [...]

26 Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon Selected system is displayed. Systems on this dialog box can be selected. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the PC System Menu icon. Press the Poi[...]

27 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows. Move the red framed pointer to the Auto PC Adj. item and press the SELECT button. "Please wait..." message will appear while [...]

28 Computer Input Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the PC Adjust Menu icon. 1 2 Press the Point ed buttons to move the red framed pointer to the item that you want to adjust and then press the SELECT button to display the adjustment dialog box. Press the Point 7 8 but[...]

29 Computer Input Adjust the horizontal area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value. Display area H Adjust the vertical area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value. Display area V Reset Store Exit the PC Adjust Menu. Quit To store adjusted data, move t[...]

30 Computer Input Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Select Menu icon. 1 2 Press the Point ed buttons to move the red framed pointer to the level that you want to set and then press the SELECT button. Move the red framed pointer to the level and press the SELE[...]

31 Computer Input Press the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Adjust Menu icon. 1 2 Press the Point ed buttons to move the red framed pointer to the item that you want to adjust, and then press the SELECT button. The lev[...]

32 Computer Input Store Exit the Image Adjust Menu. Quit To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box will appear and then select [Yes]. Stored data can be called up by selecting "Image" in the Image Level Se[...]

33 Computer Input When the Digital zoom + is selected, the On-Screen Menu will disappear and the message “D. zoom +” will be displayed. Press the SELECT button to expand the image size. And press the Point ed 7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be [...]

34 Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu ic[...]

35 Video Input Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed po[...]

36 Video Input Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the AV System Menu icon. 1 V ideo S yst em Selection AV System Menu (Video or S-Video) AV System Menu (Component) Press the Point ed buttons to move the red arrow pointer to the system that you want to select and then pr[...]

37 Video Input Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Select Menu icon. 1 2 Press the Point ed buttons to move the red framed pointer to the level that you want to set and then press the SELECT button. Move the red framed pointer to a level and press the SELECT bu[...]

38 Video Input Press the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Adjust Menu icon. 1 2 Press the Point ed buttons to move the red framed pointer to the item that you want to adjust and then press the SELECT button. The level o[...]

39 Video Input To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box will appear and then select [Yes]. Stored data can be called up by selecting "Image" in the Image Level Selection on page 37. Image Level Menu Move [...]

40 Video Input This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Screen Menu icon. Press the Point ed buttons and move the red framed pointer to the function that you want to sele[...]

41 Display Blue back Press the Point 7 8 buttons to switch On/Off. When this function is “On,” a blue image is displayed while the input signal is not detected. Keystone Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Setting Menu icon. 1 2 Language The language used in the [...]

42 Setting Capture This function enables you to capture the image being projected and use it for a start-up display or interval of presentations. After capturing the projected image, go to the Logo select function and set it to “User”. Then the captured image will be displayed when turning on the projector next time or pressing the NO SHOW butt[...]

43 Logo PIN code lock Dialog Box Quit Pointer Enter a Logo PIN code Select a number by pressing the Point 7 8 buttons and fix the number with the SELECT button. The number will change to " ✳ ". If you fixed an incorrect number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to &[...]

44 Setting Ceiling Rear Ceiling When this function is “On,” the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “On,” the picture will be left/right reversed. This function is used to project the image to a rear projection screen[...]

45 Setting On start When this function is “On”, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. ✔ Note: Be sure to turn the projector off properly (see “Turning Off the Projector” on page 19). If the projector is turned off in the incorrect sequence, the On start function does not opera[...]

46 Setting Key lock If the top control accidentally becomes locked and you do not have the remote control nearby, disconnect the AC power cord from the AC outlet, and then with pressing the SELECT button, reinsert the AC power cord. This will cancel the top control lock. Key lock Select Key lock. Choose one of the alternatives with the Point ed but[...]

47 Setting The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the Point d button, and press the SELECT button to display the New PIN code input dialog box. Select a number with the Point 7 8 buttons and fix the number with the SELECT button. Repeat it to complete entering a four-digit number. When[...]

48 This function is used to reset the lamp replacement counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 53 for operation. Lamp counter Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock and the lamp counter to the factor[...]

49 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. TOP CONTROL Wa r n i ng Indicator The pr oject or is shut do wn and the W ARNING indicator is blinking r ed. When the temperature inside the projector reaches a certain l[...]

50 Maintenance and Cleaning Turn off the projector, and disconnect the AC power cord from the AC outlet. Turn over the projector and remove the air filters by pulling the latches upward. 1 2 Air filters prevent dust from accumulating on the optical elements inside the projector. Should the air filters become clogged with dust particles, it will red[...]

51 Maintenance and Cleaning Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Cleaning the Pr oject or Cabinet Disconnect the AC power cord before cleaning. 1 Softly wipe the projector body with a soft, dry cleaning cloth. When it is heavily[...]

52 Maintenance and Cleaning When the life of the projection lamp of this projector draws to an end, the LAMP REPLACE indicator emits a yellow light. If this indicator lights yellow, replace the lamp with a new one promptly. Follow these steps to replace the lamp. Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When [...]

53 Maintenance and Cleaning Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. Turn the projector on, press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Setting Menu icon. [...]

54 Tr oubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on page15-17. – Make sure all equipment is connected to AC outlet and the power is turned on. – When you operate the projector with a comp[...]

55 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix The CE Mark is a Directive conformity mark of the European Community (EC). Some displays are not seen –Check the Display f[...]

56 Appendix Menu T r ee Mode 1 Mode 2 SVGA 1 - - - - Auto PC Adj. Fine sync. Total dots Horizontal Vertical Display area - H Display area - V Reset Dynamic Real Blackboard(Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color temp. Red Gamma Store Quit Normal True Wide Full screen Digital zoom + 0 - 31 0 - 63 0 - 63 Computer Input P[...]

57 Appendix Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Dynamic Cinema Blackboard(Green) Image 1 Image 2 Image 3 Quit Normal Wide 0 - 63 0 - 63 Off Set ting Image Select System (2) System (3) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma Progressive 0 - 63[...]

58 Appendix Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement [...]

59 Appendix Compatible Comput er Specifications PLC-XU73/PLC-XU70 (XGA) can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. Appendix ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 [...]

60 Appendix Te c hnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 9.66" x 2.3" x 6.82" (294.5mm x 69.5mm x 208mm) (Not including adjustable feet) Net Weight 5.3 lbs (2.4kgs) Feet Adjustment 0˚ to 10.0˚ Panel Resolution LCD Panel System 0.6" TFT Active Matrix type, 3 panel[...]

61 Appendix Model No. COMPONENT-VGA Cable : POA-CA-COMPVGA SCART-VGA Cable : POA-CA-SCART Ceiling Hanger : POA-CHS-US01 (for low ceiling) POA-CHL-UL01 (for high ceiling) POA-CHB-XU70 Laser Pointer Remote Control Unit : POA-RCKIT03 Presentation Kit : POA-RCKIT02 The parts listed below are optionally available. When ordering those parts, give the ite[...]

62 Appendix Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 SERVICE PORT CONNECTOR Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) 2 34 1 R X D ----- ----- GND RTS / CTS GND GND Serial 1 2 3 4 5 6 7 8 COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Con[...]

63 Appendix Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory[...]

Printed in Japan Part No. 610 322 9430 (1AA6P1P4915-- MS5A) SANYO Electric Co., Ltd.[...]