JVC KD-G464 Bedienungsanleitung

CD RECEIVER For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0302-001B [UI] KD-G464 Cover_KD-G464[UI]ff.indd 2 Cover_KD-G464[UI]ff.indd 2 3/3/05 3:15:24 PM 3/3/05 3:15:24 PM[...]

2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUT I ON : Do not open the top cover. There are no user serviceable parts inside the unit; leave[...]

3 How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G464 ......... 5 Parts identification ................................. 5 Remote controller — RM-RK50 ... 6 Main elements and[...]

4 How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 24 and 25). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either one. Press[...]

5 Control panel — KD-G464 Display window 1 (standby/on attenuator) button 2 SEL (select) button 3 BAND button 4 SOURCE button 5 Loading slot 6 Display window 7 0 (eject) button 8 EQ (equalizer) button 9 Remote sensor • DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting). p 5 (up) button / +10 button q Contro[...]

6 Remote controller — RM-RK50 Main elements and features 1 (standby/on/attenuator) button • Turns on and off the power and also attenuates the sound. 2 5 U (up) / D (down) ∞ buttons • 5 U: Changes the FM/AM bands. • D ∞ : Changes the preset stations. • Changes the folder of the MP3/WMA discs. • While playing an MP3 disc on an MP3-co[...]

7 Getting started Basic operations ~ Ÿ You cannot select some sources if they are not ready. ! For FM/AM tuner only ⁄ Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 17 and 18.) To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs[...]

8 Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 20. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Select “[...]

9 Radio operations Listening to the radio ~ Ÿ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select the desire[...]

10 3 4 Preset number flashes for a while. Listening to a preset station 1 2 3 Select the preset station (1 – 6) you want. or To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 2 Sel[...]

11 • When inserting an audio CD or a CD Text disc: * 2 Elapsed playing time appears for a while if the current disc is an audio CD. To stop play and eject the disc About MP3 and WMA discs MP3 and WMA (Windows Media ® Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting [...]

12 ~ * If you have changed “EXT IN” setting to “EXT IN” (see page 20), you cannot select the CD changer. Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver. • Y ou can also conn[...]

13 To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 or WMA disc) For MP3 discs: For WMA discs: To next folders. To previous folders. • When the current disc[...]

14 To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digit numbers at the beginning of their folder names—01, 02, 03, and so on. • To select a particular t[...]

15 Changing the display information While playing an audio CD or a CD Text ( / ) * 1 If the current disc is an audio CD, “NO NAME” appears. While playing an MP3 ( / ) or WMA ( ) disc • When “TAG DISP” is set to “TAG ON” (see page 20) * 2 If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this case, the TAG[...]

16 Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc in the receiver Mode Plays repeatedly TRK RP T : The current track. • RPT lights up. FLDR RP T * 1 : All tracks of the current folder. • [...]

17 Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ex.: When “ROCK” is selected Indication pattern for each sound mode: Indication For: Preset values BAS * 1 TRE * 2 LOUD * 3 USER (Flat sound) 00 00 OFF ROCK Rock or disco music +03 +01 ON CLASSIC Classical[...]

18 Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE* 1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD* 2 (fader) Adjust the front an[...]

19 General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table on the next page. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. EN18-23_KD-G464[UI]1.indd 19 EN18-23_K[...]

20 Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [8]. DEMO OF F : Cancels. CLOC K H Hour adjustment 1 – 12, [8] [Initial: 1 (1:00)] CLOC K M Minute adjustment 00 – 59, [8] [Initial: 00 (1:00)] D[...]

21 When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN18-23_KD-G464[UI]1.indd 21 EN18-23_KD-G464[UI]1.i[...]

22 ! Adjust the volume. ⁄ Adjust the sound as you want. (See pages 17 and 18.) External component operations Playing an external component You can connect an external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied). • For connection, see Installation/Connection Manual (separate volume). • Before[...]

23 Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player in the f[...]

24 More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Selecting the sources • When[...]

25 Playing an MP3/WMA disc • This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower). • This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files. • This receiver can hand[...]

26 Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset the rece[...]

27 Symptoms Causes Remedies MP3/WMA playback • Disc cannot be played back. No MP3/WMA tracks are recorded on the disc. Change the disc. MP3/WMA tracks do not have the extension code <.mp3> or <.wma> in their file names. Add the extension code <.mp3> or <.wma> to their file names. MP3/WMA tracks are not recorded in the form[...]

28 Symptoms Causes Remedies CD changer • “NO DISC” appears on the display. No disc is in the magazine. Insert disc into the magazine. Disc is inserted upside down. Insert disc correctly. • “NO MAG” appears on the display. No magazine is loaded in the CD changer. Insert the magazine. • “RESET 8” appears on the display. This receive[...]

29 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. L[...]

© 2005 Victor Company of Japan, Limited EN 0305DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-G464[UI]ff.indd 2 Rear_KD-G464[UI]ff.indd 2 3/3/05 3:15:37 PM 3/3/05 3:15:37 PM[...]

KD-G464 Installation/Connection Manual GET0302-002A [UI] 1204DTSMDTJEIN EN This receiver is designed to oper ate on 12 V D C , NEGA TI VE grou nd el ec tric al syst ems . If your v ehicle does not hav e this system, a voltage inv er ter is required, which can be purchased at JVC car audio dealers. J Handles F W asher (ø5) G Lock nut (M5) H Mountin[...]

ELECTRICAL CONNECTIONS 2 A T ypical connections Before connecting: Chec k the wiring in the vehicle carefully . Incorrect connection may cause serious damage to this receiver . The leads of the power cord and those of the connector from the car body ma y be different in color . 1 Connect the colored leads of the power cord in the order specifi ed [...]