Precor P80 manual

Oper ating and Maintaining the P80 C onsole Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 P80 OMG 301407 -301 rev F , en March 2012[...]

[...]

[...]

Edition Informa tion OPERAT ING AND M AINT AININ G THE P 80 C ONSO LE P/N 30 1407 - 301 rev F Copyright © Mar ch 2012 Preco r Incorpo rate d. All rig hts reserved. Specifications subject t o change without no tice. Trademark Not e Precor, AMT, and EFX are regi stered trademarks and Pr eva is a trade mark o f Pre cor Inco rporate d. Othe r nam es i[...]

Intellectual Proper ty Notice All rig hts, title, and in terests in and to the softw are of the Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its supplier s, as the case may be. Precor is widely recognized for its innovat[...]

[...]

Important Sa f ety Instructions Importan t: Save these i nstructions for f uture r eference. Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and owner ’ s man uals , befo re in sta llat ion of th is device. Note: This pr oduct is intended for commercial use. The display[...]

6 Operating and Mai ntaining the P80 Console  Make sure all users see a physician for a complete physical examination before they begin any fitness program, particularly if they have high blood pressure, high chol esterol or heart disease; have a family history of any of the preceding condi tions; are over the age of 45; smoke; are obese; have n[...]

Important Safe ty Instructions 7  Route power cables so tha t they are not walke d on, pinched, o r damage d by it ems place d upo n or agai nst them, inc luding the equipment i tself.  Ensure the equipment has adequate ventilation. Do not place anything on top of o r over the equipment. Do n ot use on a cushioned surfac e that could block th[...]

8 Operating and Mai ntaining the P80 Console  Maintai n the equipment to keep it in good working condition, as described in the Maintena nce section of the owner ’ s manual. Insp ect the equipment for incorrect, worn, or loose components , and then correct, replace or tighten prior to use.  If you plan to move t he equipment, obtain help a [...]

Important Safe ty Instructions 9 Hazardous Mat erials and Proper Dispo sal The ba tte ries w ith in se lf - powered equipment conta in materi als that are conside r ed hazardous to the env ironment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact P recor Commercial Products Customer Support[...]

10 Operating and Mai ntaining the P80 Console Federal Communications Commission, Part 15 This equipment has been t ested and found to comply with the limit s fo r a Cl ass A dig ital devic e, p ursuan t to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against har mful interfer ence in a commercial installatio[...]

Important Safe ty Instructions 11 Directive compliance has been verified to the following standard s:  EN 55 022  EN 300 330 - 1 V1.5.1  EN 300 330 - 2 V1.3.1  EN 301 489 - 3 V1 .4 .1  EN 301 489 - 1 V1.8.1  EN 609 50 -1 Regulatory Not ices for Cardiovascular Exercise Equipment The regulatory information in th is section applies t[...]

12 Oper ating an d Mai ntaining the P80 Console Federal Communications Commission, Part 15 This e quipm ent has bee n t ested and found to comply with the limits for a Class A digital devic e, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against har mful interfer ence in a commercial installatio[...]

Important Safety Instructions 13 Electrical Recom mendations: 120 V and 24 0 V Treadmills Note: This i s a re commendation only. NEC (National Electric Code) guide lines or loca l reg ion elec tric c odes mu st be followed. You should have received a p ower cable that meets your l ocal electrical code requirements along with the equipment. Precor t[...]

14 Operating and Mai ntaining the P80 Console Electrical Recom mendations: All Equip ment Excluding Trea dmills Note: This i s a re commendation only. NEC (National Electric Code) guidelines or loca l regio n elect ric co des mus t be followed. For equipment fitted with a P80 console or Personal Vi ewing System (PVS) screen a se parate power connec[...]

T able of Cont ents Import ant Safety Instr uctio ns ................................................... 5 Safety Precaut ions ................................................................................ 5 Hazardous Mater ials and Proper Disposal .................................... 8 Product Recyc ling and Disposal ............................[...]

16 Operating and Maintaining the P80 C onsole Beginning Your Workout ......................................................... 47 Starting a QuickStart ™ Workout ................................................... 47 Starting a Fe atured Worko ut .......................................................... 47 Starting a Preset Worko ut ............[...]

Chapter 1 Getting St art ed The P80 c onsole offers admini strators and users th e ability to set defaul t settings that meet thei r s pecific n eeds. To accompl ish this, the con sole supports setti ngs for different classes of users depending on t heir administrative rights.  A guest user exe rcises on a piece of e quipment without signing in [...]

18 Operating and Maintainin g the P80 C onsole Identifying Parts of the Console The following figure provid es information about the console keys. The number and act ions of the console keys m ay differ slightly depending on the type of equipmen t. Figure 4 : P80 console keys Table 1. Key descriptions for the P80 console Number Key N ame Detail Pau[...]

Getting Started 19 Using the Trea dmill Safety Clip The tread mill is equipped with two different stop functions, which behave as follows: If the us er … Then the treadm ill b elt … And the console … Presse s do wn on the r ed STOP b utton Slows to a s top Shows t hat the e xerc ise worko ut is pa used Pulls on the la nyar d attac hed to t he[...]

20 Operating and Ma intaining the P80 Console If the restar t switch tr ips during exer cise, per form the following steps: 1. Reattach the safety clip if necessary. 2. Press the r estart switch down until it clicks, retu rning it to its normal position. Note: If th e restart switc h trips, all in formation about the current workout is del eted. 3.[...]

Getting Started 21 Treadmill Auto S to p™ (Automatic Stop ) Function Importan t: The default setting for this fe ature is ON. An administrator can turn off thi s feature in the System Settings; however, Precor reco mmends i t remain ON. The Auto Stop™ (Automat ic Stop) feature is des igned to bring the treadmill to a g radual stop when it is no[...]

22 Operating an d Maintaining the P80 Console[...]

Chapter 2 Configuring the Sy st em Settings Use the Syste m mode to configure setti ngs in ways that benefit your users and your facility. The System menu is visi ble on ly to admin ist rat ors an d reg iste red se rvic e technicians. Changes made t o t hese settings are saved to the fitness eq uipment. Importan t: A special c ode is required to ac[...]

24 Operating and Mainta ining the P80 Console To view the System menu: 1. On the Welcome screen, press and hold Pause . Figure 7 : Pause key 2. While hold ing Pause , press each of the follow ing keys once in the order presented. Referring to the diagram below, pr ess: 1 2 3 4 Channel Up Volume Down Volume Up Channel Down Figure 8 : Settings s ecur[...]

Configuring the System S ettings 25 About System infor mation setti ngs provide basic information including equipment mode ls and serial numbers. Most of these settings are for inform ational purposes only and cannot be mod ified . To view the S ystem Info settings menu: 1. Use the administrator code and password to view th e equipmen t settings. 2[...]

26 Operating an d Maintaining the P80 Console Setting Access Detail Heartbeat Interv al Only Pr ecor service techn ician s can modif y this setti ng. Deter mines how of ten the conso le comm unicate s with the server. Minim um Heartbeat Interv al Only Pr ecor service techn ician s can modif y this setti ng. Minim um num ber of times t hat the co ns[...]

Configuring the System S ettings 27 Equipme nt Usa ge The Equipment Usage settings p rovide information on indiv idua l usage as well as cumula tive equ ipmen t usa ge . This information and these settings are accessible only to administr a tors an d regist ered serv ice t echnicians. To view the Usage s ettings : 1. Use the administrator code and [...]

28 Operating and Main taining the P80 Console System Setti ngs Use the Syste m Settings to test your equipment and set parame ters tha t benefit your users and your facility. The System Settings menu is v isible only to administrator s and registered service technicians. The System Settings menu contains the f ollowing sect ions:  Connectivity ?[...]

Configuring the System S ettings 29 Connectivity Configuring your audio, video, and netwo rk infrastructure requires expertise. Precor strongly r ecommends that you work with a qualified contr actor to set up this infrastructure. This setting provides the following information  Network Ty pe  Configuration  Status  IP Address  Preva [...]

30 Operating and Main taining the P80 Console Display These settings are configurable per console, but can also be configured using Preva™ Bus iness Suite. The equipment m ust be inactive before you can change the display settings. Fitness equi pment is d efine d as inact ive if al l of th e fo llow ing co nditions are true:  No registered use[...]

Configuring the System S ettings 31 TV Settings TV Settings help you set up television channels for your users. The TV Settings are:  Channel Guide  Region  Default Channel  Skip Unnamed Channels  Extensive Scan  Closed Captioning  Export /Impo rt Ch annel Nam es To view T V Setting inform ation: 1. Use the administrator code a[...]

32 Operating and Maintainin g the P80 C onsole To run an extens ive sc an: 1. Touch System Setti ngs . 2. On the System Settings m enu, touch TV Settings . 3. Touch Extensi ve Scan . Note: This scan may take up to two hours to com plete. To delete a channel from the Channel Guide: 1. On the Channel Guide scre en, touch the listing for the channel y[...]

Configuring the System S etti ngs 33 Editing the Export/Import Channel File Note: You will need to scan for channels before you can export the file. If you have not scanned for channels, re fer to Channel Configurations in the preceding section. Export ing the channe l list from the fitn ess equipment cre ates a file ca lled ch anne l - lis t.ini. [...]

34 Operating and Mainta ining the P80 Console To edit the file and re load it: Note: You will need a UTF - 8 capable editor program to open the channel - list .in i file . Suc h prog rams are ava ilab le fr ee on the inter net. 1. Using the editor, open the channel_l ist.ini file and edit the channel names on the righ t side of the equal sign. Do n[...]

Configuring the System S ettings 35 To modify the Wor kout Lim its settings : 1. Use the administrator code and password to view the equipmen t settings. 2. Touch System Settings , then Workout Lim its . Table 7. Workout Limits settings Settin g Name Setting Opti ons Defaul t Value Maxim um Worko ut Durati on Use on - screen keypad to enter the max[...]

36 Operating and Maintain ing the P80 Console Manage S ettings Use the Manage Settings feature to save your personalized equipmen t settings to a USB drive, or to impor t n ew software updates fr om a USB drive. Precor recommends that y ou configure the P80 consoles in your facility by sharing setting files. The easiest way to do this is to configu[...]

Chapter 3 Intr oducing Users t o the P80 Console The P80 console offers cle ar visuals and a touch - scr een layout that encourages program exploration. Multiple preset workouts are designed to help individual use rs meet th eir fitness goals, and the cons ole keys and durable motio n controls are responsive and easy t o use. Importan t: Please rev[...]

38 Op er ati ng a nd M aintaining th e P80 Console Changing the Default Language The Welcome screen displays in a default language selected for your regi on. To change the defa ult lang uage before beginni ng your workout: 1. On the Welc ome screen, t ouch the language icon. Figure 9 : Language ic on 2. On the Language screen, select your language [...]

Introduci ng Users to the P80 Console 39  As you work out, your pers piration will help transmit your heart rate signal. If you have difficulty using the handheld grips to determine your heart rate, try the sensors again later in the workout to see if you can obtain a heart rate signa l.  If the touch heart rate feat ure does not work for you[...]

40 Op er ati ng a nd M aintaining the P80 Console Using a Chest Strap Tr ansmitter WARNING Signals u sed by the Che st Strap T ransmitter (or heart ra te strap) may inte rfere with pacemakers or other i mplanted devices. Consult your physicia n and the manufa cturers of your Chest Str ap Transmitter and implanted device before u sing a Chest Strap [...]

Introduci ng Users to the P80 Console 41 Using the View Chann els and View Buttons There are three primary screen views that make certain information visible during your workout. You can chang e the look and information provided on the s creen by at an ytime using the Views b utton.  Workout Vi ew – Shows panels, icon bar, and the sta tus bar.[...]

42 Op er at ing and M aintaining the P80 Console To cha nge views: 1. The default view is the Wo rkout View. Slide the pane ls side to side on the screen to see the media panel. 2. Press V iew s twice to see the Status view. 3. Press V iew s a third time to make the Statu s Bar disappear leaving only the Media view. Using the Medi a Panel Use the M[...]

Introduci ng Users to the P80 Console 43 Connecting and Using Your iPod® You can listen to your f avorite music and cont rol your iPod directly from the console. To connec t your iPod: 1. Insert the iPod into the con nector at the top of the console and place your iPo d securely in the pocket provided. The media panel displays the words Now Playin[...]

44 Op er ati ng a nd M aintaining th e P80 Console Using the Workout Progress Panel Use the Workout Progress panel to c ustomize your workout. This is the first panel that displays once you select a workout or press GO . I f you are on t he Media panel, there are two ways to return to the Wor kout Progress panel. To retur n to the Work out Progr es[...]

Introduci ng Users to the P80 Console 45 Using the Prev a Net Icon WARNING For Treadmills: Do not use typing or w eb surfing features while walking at spee ds that exceed a slow and relaxed leisurel y pace. Always stabilize your self by h olding a stationary handle bar while using ty ping or web surfing features. For AMT and EFX: Always s tabilize [...]

46 Op er ati ng a nd M aintaining the P80 Console[...]

Chapter 4 Beginning Y our W ork out CAUTION: I f you are u sing a trea dmill, be sure to attach the security clip to your clothing befor e starting your workout. The P80 console offers ma ny different workout options. T he following sections explain the type of workouts avail able and how to get star ted using them. Starting a Quic kStart ™ Worko[...]

48 Operating and Mainta ining the P80 Console Starting a Featured Workout The Featured Workout ap pears in a panel on the We lcome Screen. Use Featured Workouts to explore the fi tness benefi ts of preset programs and to add variety to your workout. To begin a Featured Work out, touch Go on the Featured Workout panel . Starting a Preset Workout Pre[...]

Beginning Y our Workout 49 Table 10. Preset workout desc riptions Goal Workout Details Lose Weight C hoose fr om sev eral c ourses desig ned to encour age we ight lo ss. Be F it Ma intai n your f itnes s level so you ca n stay active and fit . Get Toned Tone y our leg s. Pic k a foc us of calf, thig h, or glutea l reg ion. Push Perfor mance Choose [...]

50 Operating and Mainta ining the P80 Console Table 11. Examples of Personal Information sett ings Setting Setting Optio ns Default Value Access Detail Age • Ove r 85 • 75 - 84 • 65 - 74 • 55 - 64 • 45 - 54 • 36 - 44 • 35 • 25 - 34 • 18 - 24 • Under 18 35 Admin/Tech: None Ent er age as a value or a range. Weigh t • Ove r 310 ?[...]

Beginning Y our Workout 51 Adjusting the Workout Intensity To adjust the equipment incline, speed, and/or resistance, use the motion controls lo cated just below the conso le keys. Figure 16 : Motion controls Adjust the motion controls, upward o r downward, to change the incline, speed, or resistance. Figure 17 : Adjust motion controls up or down M[...]

52 Operating an d Maintaining the P80 Console Viewing Your Workout Status While Exercising The Status Bar co ntains status measurements and is visible across the top of the viewing screen. Information displayed in the Sta tus Bar helps you measure how your body is responding to the exercise session. The default status measurements displayed are: ?[...]

Beginning Y our Workout 53 Scoring Your Fitness Workout This information helps you interpret your score for the Test Your Fitness workout. The scor e for this test is determi ned by this formula: Rate of oxygen (O 2 ) consumption, in ml per mi nute, modified for the user ’ s maximu m heart rate (220 - age), divided by the user ’ s weigh t in ki[...]

54 Operating and Maintain ing the P80 Console[...]

Chapter 5 Maintenanc e To keep the equipment fun ctioning properly, perform the mi nor maintenance tasks in this section at the intervals suggested. Failure to maintain the equipment as described in this secti on could void the Precor Limited Warra nty. DANGER To reduce the risk of electrical shock, alw ays disconnect the equ ipment from i ts power[...]

56 Operating and Maintain ing the P80 Console Importan t: Do not use any acidic c leaners. Doing so wi ll weaken the paint or pow der coatings and void the Prec or Limited Warranty. Never pour water or spra y liquids dir ectly on the console or c onsole ’ s screen.  It is import ant to avoid using any c orrosive c hemicals on the console or sc[...]

[...]

Oper ating and Maintaining the P80 C onsole Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 P80 OMG 301407 -301 rev F , en March 2012[...]

As sembling and Maintaining AMT ® 800-Series A daptiv e Motion T r ainers ® Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 AMT OMG 300 710-341 r ev G, en W arr anty #36286- 114 11 July 2011[...]

[...]

[...]

Edition Information ASSEMBLING AND MAI NTAINING AMT 800 - SERIES ADAPTIVE MOTION TRAINERS P/N 300710- 341 rev G Copyright © July 2011 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, and EFX are registered trademarks and Preva is a trademark of Precor Inco rporated. Other names [...]

Important Sa f ety Instructions Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and o wner ’ s manuals, before installation of this device. The display apparatus (hereinafter referred to as the console ) is intended to be shipped with new Precor exercise equipment (here[...]

4 Assembling and Maintaining AMT 800 - Series Adaptive Motion T rainers  Do not allow children, or people unfamiliar with the operation of this equip ment, on or near it. Do not leave children unsupervised around the equipment.  Make sure all users wear proper exercise clothing and shoes for their workouts and avoid loose or dangling clothing[...]

Important Safety Instructions 5  Proper Location for Equipment  For all equipment other than treadmills: Loca te at least 40 inches (1 meter) away from walls or furniture on either si de of the equipment, and 40 inches (1 meter) away from objects behind the equipment.  For treadmills: Locate at least 40 inches (1 meter) away from walls or [...]

6 Assembling and Maintaining AMT 800 - Series Adaptive Motion T rainers  Do not operate the equipment where aerosol (spray) products are being used or where oxygen is bei ng administered.  Do not use outdoors.  Do not attempt to service the equipment yourself, except to follow the maintenance inst ructions in this manual.  Never drop or[...]

Important Safety Instructions 7 Product Recycling and Disposal This equipment must be recycled or discarde d according to applicable local and national regulations. Product labels, in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE), determine the framework for the return and recycling of use[...]

8 Assembling and Maintaining AMT 800 - Series Adaptive Motion T rainers Federal Communications Commission, Part 15 This equipment has been test ed and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectio n against harmful interference in a comme[...]

Important Safety Instructions 9 European Applications CE compliance is claimed to the following directives:  1999/5/EC R&TTE Directive  2006/95/EC LVD Directive  2002/95/EC RoHS D irective Directive compliance has been verified to the following standards:  EN 55022  EN 300 330- 1 V1.5.1  EN 300 330- 2 V1.3.1  EN 301 489 - 3[...]

10 Assembling and Maintai ning AMT 800 - Series Adapti ve Motion Trainers Radio Frequency Interference (RFI) This Precor exercise equipment conforms to the following national standards defining acceptable limits for radio frequency interference (RFI). Federal Communications Commission, Part 15 This equipment has been test ed and found to comply wit[...]

Important Safety Instructions 11 Electrical Recommend ations: All E quipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power con nection is required. For [...]

12 Assembling and Maintai ning AMT 800 - Series Adapt ive Motion Trainers Obtaining Updat ed Documentation Current documentation for Experience Series consoles and Preva Networked Fitness softwa re is available at http://www .precor.com/pro ductmanuals . You may wa nt to check in for updated information from time to time as the universe of Preva fe[...]

T able of C ont ents Important Safety Instructions .................................................... 3 Safety Precautions ................................................................................ 3 Educating Users .................................................................................... 6 Hazardous Materials and Proper Disposal[...]

14 Assem bling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers Maintenance .............................................................................. 39 Daily Cleaning ..................................................................................... 39 Daily Inspect ion ...........................................................[...]

Chapter 1 As sembling the AMT Importan t: The instructions in t he follo wing procedur es are described f rom the perspective of a p erson standing directly in front of the equ ipment (that is, on the opposite s ide of the control con sole from a person using the equipm ent). These descriptions m ay not match the n ames of certain p arts in the par[...]

16 Assembling and Maintaining A MT 800 - Series Adaptive Motion Trainers Hardware Kit (not to sc ale) The hardware kit shipped wit h this equipment contains the fasteners and other har dware components shown in the following table. Before you begin assembly, make sure that your hardware kit is compl ete. If not, please contact Precor Customer Suppo[...]

Assembling the AMT 17 Required Tools  ⁵₁₆ - inch hex wrench  ⁵₃₂ - inch hex wrench  #2 Phillips screwdriver  Rubber mallet  SAE standard soc ket set  Wire cutter  Torque wrench (calibrated in inch - pounds) Performing the Assemb ly DANGER Do not attempt to con nect electric al power until all assemb ly procedu[...]

18 Assembling and Maint aining AMT 800 - Series Adapt ive Motion Trainers 3. Insert the end caps into the front fra me tube. If necessary, us e a rubber mallet to tap them into place. Figure 2 : Remo val of unit f rom pallet and inserti on of end c aps To attach the handlebars : 1. Slide a plastic boot onto ea ch handlebar. Figure 3 : Boot attachme[...]

Assembling the AMT 19 Note: When the handlebars are mount ed co rrectly, each bends slightly outward. Figure 4 : View o f handleba r placement 3. Attach the handlebars using four ⁵₁₆ - inch x 1¾ - inch hex head screws, e i ght ⁵₁₆ - inch washers, and four ⁵₁₆ - inch locknuts. Using a torque wrenc h, tighten the fasteners[...]

20 Assembling and Maintaining AMT 800 - Series Adaptive Motion Trainers Removing Access Co vers With its access covers removed, the AMT provides easy access to its cables and internal components. Ti p: In the following procedure, s et aside the covers and their mounting hardware in groups, in the order in which you remove them. This simplifies rein[...]

Assembling the AMT 21 Threading the Cables Depending on the model of console you are installing and the optio ns it includes, you will need to install one or more of the following cables:  Television (coaxial with F connectors)  Power  Ethernet Precor recommends threading new cables from the top down, to take advantage of gravity. A fish t[...]

22 Assembling and Maintaining AMT 800 - Series Adaptive Motion Trainers Connect … To … The console power cable The power cable assembly The Ethernet cable The eight - connector modular jack on the jack panel The television cable The coax ial conn ector on th e jack panel Note: This cable must be wrench tightened. 4. Repeat steps 1 through 3 unt[...]

Assembling the AMT 23 To level t he AMT: 1. Gently rock the AMT while stand ing on one of its foot plates and grabbing the oppos ite handlebar. First stand on the left foot plate and grab the right handlebar to rock the AMT, then repeat the step while standing on the right foot plate and holding the left handlebar. If there is any movement, ask you[...]

24 Assembling and Maintaining A MT 800 - Series Adaptive Moti on Trainers Breaking in the Equip ment Precor equipment does not require an actual break - in period. However, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shipped. This ca n cause the equipment to operate with a small amount of r[...]

Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting ha rdware and connector locatio ns whenever possible. The installation sequence for any of them is as follows:  Threading the cable assembly  Connecting cables  Completing the installation (tightening the mounting screw[...]

26 Assembling and Maintaining A MT 800 - Series Adaptive Moti on Trainers Importan t: Before you begin th e following proc edure, remove the rear cover fr om the control con sole. To remov e the cover, use yo ur fin gernails to pry t he lower edge loo se, then swing the cover up and out as sho wn in the follow ing illustration . Figure 9 : Removing[...]

Installing the Console 27 3. Rest the console on the console mount so that the notch o n the bottom of the console ’ s back plate rests on the rectangular hook at the bott om of the console mount, as shown in the following figure. Figure 10 : Console p ositioning on b ase unit 4. Tilt the console forward until it stops. Use one hand to steady the[...]

28 Assembling and Maintaining AMT 800 - Series Adaptive Moti on Trainers Connecting Cables (P80) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. R efer to the following diagram and table to identify the cables and connect[...]

Installing the Console 29 Table 1. P80 internal c able connec tions Cable Connector Ty pe Circuit Connector Location Ethernet (LAN) Eight - contac t modular, on round black cable TV in F- type coax ial Power with splitter cable Two - contact plug, polarized and latche d Data from base unit Eight - contact modular , on flat gray cable Heart rate sen[...]

30 Assembling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers Connecting the Telev ision Cable The console ’ s television tuner is mounted inside the console ’ s back plate. The tuner includes a short cable adapter that allows the television cable to be connected outside the back plate. To connec t the televis ion cable: 1. Pull the[...]

Installing the Consol e 31 Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data c ables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modula r jacks in the console. Because of this, it is important to exercise caution when connecting the cables. The black Etherne[...]

32 Assembling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers Connecting the Heart Rate Sensor Cable The heart rate sensor ca ble passes through the cutaway opening at the upper left corner of the back plate, th en down to the small circuit boa rd at the lower left of the console. The following illust ration shows how the cable should l[...]

Installing the Console 33 Completing the Console Installat ion (P80) Be fore you complete the final installation steps, double -check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To comple te the installa tion: 1. Feed extra cable back into the neck t[...]

34 Assembling and Maintaining AMT 800 - Series Adaptive Motion T rainers To thread the cable assembly: 1. Make sure that as much of each cable as possible passes through the opening in the midd le of the console mount on the base unit. 2. Position the console over the cons ole mount. 3. Rest the console on the console mount so that the notch on the[...]

Installing the Console 35 Conne cting Cables (P30) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. R efer to the following diagram and table to identify the cables and connectors. Figure 17 : Cable connections , P30 cons [...]

36 Assembling and Maintaining AMT 800 - Series Adaptive Motion T rainers Table 2. P30 internal c able connec tions Cable Connector Ty pe Circuit C onnector Location Safety key (treadmills only) Six- contact strip, keyed Auto Stop sensor (treadmills only) Four - contact s trip, keyed Data from base unit Eight - co ntact modular, on flat gray cable H[...]

Installing the Console 37 Connectin g Cables (P20) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. R efer to the following diagram and table to identify the cables and connectors. Figure 18 : Cable connections , P20 cons [...]

38 Assembling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers Completing the Console Installat ion(P30 and P20) Before you complete the final i nstallation steps, double -check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To comple te the [...]

Chapter 3 Maint enanc e To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of ele ctrical shoc k, alway s disconnect the eq[...]

40 Assembling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers Alternatively, you can clean the equipment with Athle tix fitness equipment cleaning wipes (for more information, visit www.athl etixproducts.c om ) CAUTION: Re ad and follow the ma nufacturer ’ s instructio ns, particularl y dilution instructions , before u sing any clea n[...]

Maintenance 41 Weekly Maintena nce Perform the following maintenance tasks every week: 1. Disconnect the external power supply. 2. C lean the floor under the equipment using a vacuum cleaner or a damp mop. 3. Verify that the stair - arm bumpers are aligned correctly. 4. When the floor is completely dry, reconnect the power (if necessary). 5. Test a[...]

42 Assembling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers Storing the Che st Stra p If you purchased the optiona l heart rate chest strap, store it in a place where it remains free of dust and dirt (for example, in a closet or drawer). Be sure to protect the chest strap from extremes in temperature. Do not store it in a place that m[...]

Chapter 4 Self- Po w er ed F eatu r es Importa nt : This chapter of the manual d escribes Precor fitn ess equipme nt that can ope rate without being conne cted to AC power. This in cludes units equ ipped with P30 or P2 0 consoles. However, P80 co nsoles must be co nnected to AC pow er through their power s upplies to operate. Fo r this reason , thi[...]

44 Assembling and Maintaining AMT 800 - Series Adaptive Motion T rainers Informationa l Displays Prior to Shutdow n The equipment saves its battery charge by moving into a shutdown mode. If the user does not mainta in the minimum rate of motion, a 30- second shutdown proce ss begins. In this mode, the console displays a c ountdown indicator and ign[...]

Self- Powered Features 45 Using the Optional Po wer Adapter After connecting t he power adapter to the equipment, plug the opposite end into the appropriate power source (120 V or 240 V). CAUTION: W hen the opti onal power adapter is in use, make sure that the po wer supply cord does no t create a s afety haz ard. Keep it out of t he way of tra ffi[...]

46 Assembling and Maintaining AMT 800 - Series Adaptive Motion Trainers Replacing the Battery The equipment ’ s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authoriz ed service technician. Refer to Obtaining Service . CAUTION: Th e battery s tored insi de the equip ment cont ain[...]

Chapter 5 C ommer c ial Car dio v ascular E quipment Lim it ed W arr anty PLEASE READ THESE W ARRANTY TERMS AND CO NDITIONS CAREFUL LY BEFORE USING YOUR PRE COR INCORPORATE D PRODUCT. BY USING TH E EQUIPMENT, Y OU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANT Y TERMS AND CONDITIONS . Limited Warranty. Precor Incorp orated warrant s all new Pr[...]

48 Assembling and Maintaining AMT 800 - Series Adaptive Motion T rainers Options / Accesso ries Many options or acc essories have components t hat are connected internal ly or mounted inside the electronic console. The following guideli nes determine the warranty for these components. If the inter nal components are insta lled by the factory or b y[...]

Commercial Cardiovascular Equipm ent Limited Warranty 49 This Limited Warranty s hall not apply to: 1. Software ver sion upgrades. 2. Software defects that do not materially and negatively affe ct the normal perfo rmance of the product under nor mal conditions of use. 3. Consumable goods or c osmetic items of the product, t he exterior of which has[...]

50 Assembling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SH ALL HAVE NO OBLIGATION OR LIABI LITY, WHETHER ARI SING IN CONTR ACT (INCLUDING W ARRANTY), TORT ( INCLUDING ACTIVE, PASS IVE, OR IMPUTED NEGLIGENCE AND S TRICT LIABILI TY), OR OTHERWISE, FOR D A[...]

Notes 51 Notes:[...]

52 Assembling and Maintaining AMT 8 00 - Series Adaptive Motion T rainers Notes:[...]

[...]

As sembling and Maintaining AMT ® 800-Series A daptiv e Motion T r ainers ® Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 AMT OMG 300 710-341 r ev G, en W arr anty #36286- 114 11 July 2011[...]