Makita UH200DW manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Makita UH200DW, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Makita UH200DW one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Makita UH200DW. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Makita UH200DW should contain:
- informations concerning technical data of Makita UH200DW
- name of the manufacturer and a year of construction of the Makita UH200DW item
- rules of operation, control and maintenance of the Makita UH200DW item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Makita UH200DW alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Makita UH200DW, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Makita service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Makita UH200DW.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Makita UH200DW item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    GB Cor dless Hedge T rimmer Instr uction manual FT a i l l e - h a i e s a n s f i l M a n u e l d ; i n s t r u c t i o n s DA k k u - H e c k e n s c h e r e B e t r i e b s a n l e i t u n g IT a g l i a s i e p i a b a t t e r i a I s t r u z i o n i p e r l ; u s o NL Accuheggenschaar Gebruiksaanwijzing E Cor t asetos inalámbrico Manual de in[...]

  • Page 2

    2 12 34 56 78 1 2 3 4 5 6 7 8 9[...]

  • Page 3

    3 91 0 11 1 2 13 14 15 16 10 11 12 13 14 15 16 17 18 19 20 17[...]

  • Page 4

    4 17 18 19 20 21 22 23 24 21 22 23 22 17 23 24 25 22 26 25 27 28 29 30 16 31[...]

  • Page 5

    5 25 26 27 28 29 30 21 18 17 32 18 33 34 35 36 37[...]

  • Page 6

    6 31 32 33 34 35 36 37 38 23 37 16 22 17 23 16 23 24 25 27 25 22 26 30 29 28[...]

  • Page 7

    7 39 40 41 42 43 44 17 18 32 18 16 17 18 19 20 17 23 22[...]

  • Page 8

    8 45 46 47 48 49 50 51 36 38 37 39 40 37 39 40 37[...]

  • Page 9

    9 ENGLISH (Origina l Instruction s) Explanati on of gene ral view SPECIFICA TIONS "D u e t o o u r c o n t i n u i n g p r o g r a m m e o f r e s e a r c h a n d d e v e l o p m ent, the specifications herein are subject to change without notice. "S p e c i f i c a t i o n s m a y d i f f e r f r o m c o u n t r y t o c o u n t r y . &qu[...]

  • Page 10

    !" #$%&'&()*+& ,'#&-$.' )$/- +'*0'-1 &')*2&/'-**.' 3.45&6'$7,' 8*9.,':45&'-1&'*)&/$- */'$7'&.&8-/48'+1*8%; <; Keep all part s of the body away from the cutter blade. Do not remove cut material or hold material to b[...]

  • Page 11

    !! Personal protective equipment !" #$%&& '($)*%$ +, "' -.%'/+ )0.12 3'4)$ 2'&.)5 +6'7% ' 852/01)29+ '926'9**$)*$19 0%:'1"%"'10'&.)5+ 6'7%'013.0;8100123 ' 750'2)0'/95&%'.126$9 2/%"'#)'2)0'4%9$'%1[...]

  • Page 12

    !" follow the safety rule s stated in this instruction manual may c ause seriou s person al injury . IMPORT ANT SAFETY INSTRUCTIONS #$%&&'() FOR BA TTER Y CARTRIDGE !* Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger , (2) battery , and (3) product using battery . "* Do not [...]

  • Page 13

    13 OPERA TION Refer to the Safety W arnin gs before operation. CAUTION: #B e c a r e f u l n o t t o a c c i d e n t a l l y c o n t a c t a m e t a l f e n c e o r other hard object s while trimming. The blade will break and may cause serious injury . #A l s o , b e c a r e f u l f o r t h e s h e a r b l a d e n o t t o c o n t a c t t h e ground[...]

  • Page 14

    !" Installing the hedge shear b lades (F ig. 19) #$%&'$%()*%(+$',-.()*%(/,0%$+ 12%$(',0( ,%3(4*%'$( 56'0%47( (Fig. 20) 809/4)( )*%()*$% %(0%)%,) (&:,(&14 :):1,(4 1()*')( )*%4%()* $%%( &:,4('$ %('6: ;,%0(3 :)*()* %(5'4: +('6: ;,<%, )(6:,%( 1,()*%( )116( *1/4:, ;7( (Fig. 21) =:[...]

  • Page 15

    !" #$ % & ' ( ) * + + % ) , - % . / * ( ( % ( , - * / % 0 + * 1 - 2 % 3 / - 3 * / - % ) , - % 4 / * ' 5 2 % 6'1-/4 $7-/% *'1%'-8 %./*( (%(, -*/%0+ *1-9% (Fig. 34) #* 5 - % $ 6 ) % ) , - % 0 + * 1 - % 4 $ 7 - / % : / $ ; % ) , - % $ + 1 % ( , - * / % 0 + * 1 - ( % * ' 1 % : & ) % &)%$')$%),-%'[...]

  • Page 16

    !" WA R N IN G : #$ % & ' ( ) * + , - ) . / ' & 0 ) 1 1 ) . / ' 2 3 + ) / 4 ' , 5 - 3 , 6 ' 3 1 & ' . 7 ' - % & ' 8 . 9 & + ' -..6'5,/'2)7 7&+'7+.0'-%&'2&56,+&2 '&0)11)./'(,63&' 2&8&/2)/4'./'-%&[...]

  • Page 17

    !" FRANÇAIS (Instructions d3origine ) Descriptif SPÉCIFICA TIONS #$ % & ' % ( ) * ' ' + ( , - + . * , / % 0 * ' ( 1 * ' 2 % & ' % 3 ( ) 3 ( ' * % 4 3 ( 5 4 * 6 4 & 7 7 3 ( ) 3 ( 431834183(3%()3()+.3,*55 373'%9 (,32(25+10:01&%0*'2( 1*'%3'/32()&'2(13(7& '/[...]

  • Page 18

    !" !"#$%&'%()*"+*%$),%$)-"#$./ #%$) %*).#$*&+-*."#$)0"+&)&121&%#-%) +,*1&.%+&%3 !45678596):9)6;!<=7>; ):<) >? 7 @ @ 9 A B ? 7 9 ) 6 ? 5 6 ) C 7 @ #$%&'() ( !* >% # % ( ) , D " + * . , ) 0 E & ) $ % $ ) $ + & 2 E - % $ ) F % ) 0 & . $ % ) . $ &quo[...]

  • Page 19

    !" Conservez toutes les consig nes et instructions pour référence ultérieure. Instructions généra les !# $%&'(& )*(&+, -,./+, %)(0% ''*0+ *1(-,. *2(0*( 3%4* (45*36 -%,( /7,)(4 *(8%& .(7/3,- ,/',. *'(/8* 0(-*( 7%)0+, %))*3* )+(4*( -5/66/'* ,-#(9/).(0*.(,)7%'3/+,%).1 (8%&.(',.:&[...]

  • Page 20

    !" #$ %&'()*+ &,'-. (./0 '1.*0'2 *'.343 &'5)23' 2+/6/0 &3' 67.55.3&/6$ 8$ %&'+3.9 ./66& ,'-.( ./0'0 23'1&0 '023:. ;&0' /*0+.46 &0$ <$ =*6&9& ,'6&'0. 46&>'6&0 '5/&33& 0>'6&am[...]

  • Page 21

    21 2. Ne rechargez jamais une batteri e complètement chargé e. La surch arge ré duit la du rée de servic e de la batterie. 3. Chargez la batterie lor sque la température de la pièce se trouve entre 10°C et 40°C (50°F et 104°F). Si une batteri e est ch aude, laissez -la refr oidir avant d e la charg er . DESCRIPTION DU FONCTIONNEMENT AT T [...]

  • Page 22

    !! "#$%&'# $()%&*)& '+,-&. /$0)&12 3)&.)&4 2035%)&% -6$*35% )7& '#$()89*2&.)&:2;& )0&12$,<& (Fig. 10) =2 3 * * ) 8 & * ) & : $ 3 ; & # $ & * ) ; & % 1 # . # . ) 0 . % # 0 ; & . ) & * 2 & : 2 ; ) & > ) % ; & * ) & 12$,&2 [...]

  • Page 23

    23 des lam es de cisa illes. Installez la part ie inc urvée de la plaque de bas e des lame s de cisa illes dans la rai nure du carter de l8outil. Ensuite, assurez-vous que la plaque de base de s lam es de cisa illes est bie n en p lace. (Fig. 25) Serrez à fond deux vis à l8aide d8une pièce de monnaie ou d8un ob jet si mila ire. (Fig. 26) Placez[...]

  • Page 24

    24 REMARQUE : #N % e s s u y e z p a s l a g r a i s s e d e l % e n g r e n a g e e t d e l a b i e l l e . Vo u s r i sq u er i ez d % en d om ma g er l % ou t il . #P o u r c o n n a î t r e l e s p r o c é d u r e s s p é c i f i q u e s d e r e t r a i t e t d%installation des lames de cisailles, reportez-vous au dos de l%emballage de s lam[...]

  • Page 25

    !" #$%&''()*+,-.('-.*$('/-0& +-1(-'()*+(1,-*.%)'-2 *'- 2()3%)$*1,('4 56 ( - , * + . . ( 7 - 2 * ' - . ( - 8 * 7 % 1 - % & - . ( - 3 ( & + . . * 8 ( - 9 & $ + : ( - : ( ' - 2(,+,'-*);)('4 Bruit <6=>?@A! B('-1+C (*&D-: (-;)&+, -2%1:# )#-E-,F 2+0&am[...]

  • Page 26

    26 DEUTSCH (Origina lanweisungen) Erklä rung der Ge samtdarst ellu ng TECHNISCHE DA TEN #A u f g r u n d u n s e r e r a n d a u e r n d e n F o r s c h u n g e n u n d W e i t e r e n t w i c k l u n g e n s i n d Ä n d e r u n g e n a n d e n h i e r a n g e g e b e n e n Te c h n i s c h e n D a t e n o h n e V o r a n k ü n d i g u n g v o r[...]

  • Page 27

    27 Gefahr ei nes Stromschlags, Br ands und/od er das R isiko von ernsthaf ten V erletzungen. Bewahren Sie alle Hinweise und Anweisungen zur späteren Referenz gut auf. SICHERHEITSHINWEISE ZUR AKKU-HECKENSCHERE GEB062- 2 1. Halten Sie das W erkzeug ausschließlich an den isolierten Grifffläc hen, da die Schne idmesser verbor gene K abel b erühr en[...]

  • Page 28

    28 beachte t werden , besteht die Gefahr eines S tr omsc hlags , Brands un d/oder d as Ris iko sch werer V erletzunge n. Bewahren Sie alle W arnhinweise und Anweisungen zum späteren Nachschlagen gut auf. Allgemeine S icherheit shinweise 1. Zur G ewäh rleistu ng eines ordnu ngsgem äßen Bet riebs muss der Benutze r diese Bedienungsanlei tung aufm[...]

  • Page 29

    29 müssen beschädigte Schutzvorrichtungen und sonstige beschädigt e T eile durch unser autorisiert es Fachpersonal ordnungsgemäß rep ariert oder ausgetaus cht we rden. 4. Schalte n Sie den M otor n ur ein, wenn Hände und Füße nicht in der Nähe de s Schneidwerkzeugs sind. 5. S tellen Sie vor dem E insc halte n sic her , das s das Werk zeu g[...]

  • Page 30

    !" #!$ Der Akkublock darf weder Feuchtigkeit noch Regen ausgesetzt werden. Ein Kurzschluss des Ak kus kann zu h ohem Kriechstrom, Überhitzung, möglichen Ve r br e n n u n g en u n d s o g ar z u e i n e r Z e r st ö r u ng des Werkzeugs führen. %& Werk zeu g und A kk ubl oc k d ür fen ni ch t an Or ten aufbew ahrt w erden, an de nen e[...]

  • Page 31

    !" #$%&'(&)*+'&*)'&,- ./*01)*&')&,*2-34.'5&)*16&$* 7)/'38&$&)*+ (-)61$(*-7/9* (Abb. 4) +38)&'6 &)*+'&*, '(*6'&/ &$*:&3 4&)/38&$ &*4&') &*;/(&* ,'(* &')&$*< '34&* 01)*,&[...]

  • Page 32

    !" #$%&$'()*$(+*$(,' -$.$(/0+$12,'3(45 &(6$.27$,3(809 ( (Abb. 17) :;<$'() *$(&*-(=* >?$($* '$.(@A' 7$9(59B 9(+*$(7C $*()1%. 8,0$' ( ,'+('$% &$'()* $(+*$ ()1%' $*+&$< <$.(8 09 HINWEIS: D# $ % & $ ' ( ) * $ ( + * $ ( ) 1 % . 8 , 0 $ ' ( ' * [...]

  • Page 33

    33 MONT AGE ACHTUNG: "S c h a l t e n S i e d a s W e r k z e u g s t e t s a u s u n d e n t f e r n e n Sie den Akkublock, bevor Sie Arbeiten am W erkzeug ausführen. Anbringen und Ab nehmen der Messerabdecku ng (Abb. 31 und 32) ACHTUNG: "A c h t e n S i e b e i m A n b r i n g e n u n d b e i m A b n e h m e n d e r Messerabdeckung dar[...]

  • Page 34

    !" Einstellen der Schneidhöhe (Ab b. 48) #$%&'()*$++),)%&-. /&0/12&31**&45/()&6*4%/*& 4%/&' +%775*8& 4%2&' ()*$++) ,)%*) %9%72& $*&4/% $&'+5-%*&%$*8%2 +%77+&: %/4%* & ;<=&>>?&<@&>>?&A@ &>>BC& D>&4$%&E$[...]

  • Page 35

    !" IT ALIANO (Istruz ioni or iginali ) Spie ga zi one d el la vi sta ge ner al e CARA TTERISTICHE TECNICHE #$ % & ' ( ) ( * * % ) + , * + ' - % & * % ' . + ' - % & ) + / 0 ) * ( * % & , 0 . 0 & , 0 1 1 % * * % & ( & 2 0 3 + 4 + '-%&,%.5(&/ )%(66+,0&+.& 6+)*7&3%8& .0,*[...]

  • Page 36

    36 AV V E R T E N Z E D I S I C U R E Z Z A P E R IL T AGLIASIEPI SENZA FILO GEB062- 2 1. Impugnare l<utensile esclusivamente dalle superf ici d i pres a isol ate, poiché l a lam a di t aglio potrebbe venire a conta tto con conduttori nascosti. Se le lam e di tagli o entrano a contatto co n un fil o perc orso d a corr ente, l e parti metallic h[...]

  • Page 37

    37 3. Utiliz zare l -apparec chio c on la massi ma cur a e attenzione. 4. L -apparecchio d e v e e s s e r e i mp i e g ato solo da persone in buone condizi oni fisiche. Eseguire il lavoro con calma e attenzione. Adoperare il buonse nso e tenere presen te che l-operator e o l-u tilizzatore è responsabile di eventuali incidenti o p ericol i che pos[...]

  • Page 38

    !" ## $ % & ' ( ) * + , - . & / 0 , 1 + 2 0 ) 0 , + / / + ' + , & * 3 - 3 4 4 ( * + , * & * * + , - + , 3)/*(--(430 )3,13,/35&'+44(,+,-+,6' 0*+430)3,70')3*+,50), -.(66('+5583 0$ #9$ :3;&02+'+ ,/+;6' +,-(,< (**+'3 (,1(--. &*+)/ 3-+= >? & ( ) 1 0 , / 3 , - ( / 5 3[...]

  • Page 39

    !" #$%&'$()*$+,*)-&., ,*/-01.23-01-&/.224$1-0+*2-&- & #)(5(,.)-&*0'()1$0*&.224(# -).1()-&(&.&-5-01$.2*& (++-)5.1()*6 78 ( 0 & . # # 2 * , . ) - & $ 0 . & ' ( ) 9 . & - , , - + + * 5 . & # - ) & * 0 + - ) * ) - & 2 . & :.11-)*.6&;-&2 .&:.11-)*[...]

  • Page 40

    40 Per rim uovere i l racc oglitor e di fra mmenti , allentar e e rimuovere i due dati di serraggio. !"#$%&#' ()#& "% % & # ' ( ) # & * 7P r i m a d i e f f e t t u a r e i s p e z i o n i o l a v o r i d i m a n u t e n z i o n e , verificare se mpre che l;utensile sia spento e che la batteria sia st ata rimossa[...]

  • Page 41

    !" #$%&'() *$)$%$&+( &,-./ 01223 &$&+435 5-637-8 -9:&;$+ & <%=;=** =>&+$& %?<(%(@? =)?>&? +&A=)*% =++=& ;$++(&B <(@@=+( &;?& A(%C=)$>&+$&B= B*?*D@?=)?&$& ED(+B?(B?& (+*%(&=<$%(@?=)$&;?& '()D*$)@?=)$&=&%$F=+(@?= )$&[...]

  • Page 42

    !" AT T E N Z I O N E : #$ % & ' ( ) * & ) + ( , - . - / 0 1 % 1 ) / 2 3 4 1 5 4 1 6 ) % & ' 3 - . 1 % 1 ) & / ) 4 1 / ( & - ) * & ) 7(819) (Fig. 43) $1%)%&' 3-.1%1)/ ()/('( )*&)4(0/&- 6),%1'1 %1)/()/ 1.()*&) 7/-++(0 0&-)1 6)'(541 515*-/ (),%1' 34(6)%3- 4(%1)&5)[...]

  • Page 43

    !" sono co nform i all e segu enti d iretti ve eur opee: #$$$%&!%'()*#$$+% !#%'( ,-.-*/. -0123*42- 5-11/*/. *6-.7-28/ 19*6- .*:0/*; 1<.5<25*-* /* 5-6=83 .1/*;1<.5 <25/> ><1/* 2/4-21<1/* 5/*;3 :=/1-? (@+$A!B C<*5-6 =83.1<>/ -.3*13 6./6 <*D/3.3 *6-.; 32D<1<* 5<0* 2<4423;3.1<.13*<[...]

  • Page 44

    !! NEDERLANDS (Origine le instructies) Ve r k l a r i n g v a n h e t o n d e r d e l e n o v e r z i c h t TECHNISCHE GEGEVENS "# $ % & ' ( ) * $ ' & ) + , & * , % & - * * . $ * / ( , - ( & * , - ( . 0 * ( 1 % 2 & ( , & * , 3 4 5 1 1($5,'%/.*'.+66+7&058,&-(&3( 9:,5%9:(&'(&ap[...]

  • Page 45

    45 Bewaar alle waarschuwingen en instructies om in de toekomst te kunnen raad plegen. VEILIGHEIDSW AARSCHUWINGEN SPECIFIEK VOOR EEN ACCUHEGGENSCHAA R GEB062- 2 1. Houd het elektrisch gereedschap alleen vast bij het geïsoleerde oppervlak omdat de messenblade n met verborgen bedradin g in aanrak ing ku nnen komen. Wanneer de messenbladen i n aanraki[...]

  • Page 46

    46 Bewaar alle waarschuwingen en instructies om in de toekomst te kunnen raad plegen. Algemene instructi es 1. V o or een corr ecte g ebrui k die nt de gebrui ker de ze gebruiksaanwijzing te lezen om zichzelf be kend te maken met de juiste manier van omgaan met het geree dschap. Gebr uikers die onvol doend e geïnform eerd zijn, lopen de kan s zic [...]

  • Page 47

    47 6. V e rwijde r zan d, stene n, n agels, enz. d ie u b innen uw werkbereik vindt. V reemde voorwerpen kunnen het snijgarnituur beschadig en en gevaarlijke terugslagen veroorzaken. 7. Als het snij garnit uur st enen o f ande re obj ecten raakt, moet u de motor onmiddellijk uit schakelen en het snijgarnituur controleren. 8. Control eer h et sni jg[...]

  • Page 48

    48 3. Laad de accu op bij een omgevingstem peratuur van 1 0 °C t ot 40 °C. Laa t een warme accu e erst afkoele n voo rdat u deze o plaadt. BESCHRIJVING V AN DE FUNCTIES LET OP: %Z o r g e r v o o r d a t h e t g e r e edschap is uitgesch akeld en dat de accu is verwijderd voordat u de werking van het gereedschap aanpast of controleert. De accu aa[...]

  • Page 49

    49 een heg , wordt v oork omen da t het snoeia fval wordt weggeworpen. (zie afb. 9) Om de zi jkant va n een heg gelijk matig te snoeien, is het handig van o nder n aar bo ven t e snoei en. (zie afb. 10) Snoei b uxus en rodode ndron v an ond er na ar bove n voor een moo ie, gl adde a fwerki ng. De snoeiafvalgeleider ( los verkrijgba ar) aanbrengen e[...]

  • Page 50

    !" #$%&$' '$()*+ #$(%,- ./%-(% /$0%&-# #$(%1 +(%#$% 21$3*+ 44$(#$% 21+*$ (%5+0$ (%)$1- (#06% (zie af b. 23) 7++*%#$%'./$#$% 1+(%#$%28#$%&$''$()*+#$( %+9%$(%'./8-9% /$0%24%#$%(-$ 8:$%&$' '$()*+ #$(%2&%1$ -*-5$3%0$ %:$3;$( %)-<% /$0%1$3 1+(5$ (%1+( %#$%&$ ''$()* +#$(6% [...]

  • Page 51

    51 ongeluk inschak elen leiden tot ernstig persoonlijk letsel. 6D r a a g b i j h e t a a n b r e n g e n o f v e r w i j d e r e n v a n d e messenbladen altijd han dschoenen zonder de sch ede eraf te halen zodat uw handen en gezich t niet rechtstreeks in aan raking komen met de messenbladen. Als u dat niet doet, kan dit leiden tot persoonlijk let[...]

  • Page 52

    !" #$%&'()& *+$%,(+ &-.+&/0. *&+..*)& 1()2+0. +,(+3& .40.*)( 0$+/* 5..6)%( *&24&1 27(+&1 (8((/ )&9&' ()& /(0((,* :'.5&- 220;$: ')$/& (0&27' ((+<&=((* &-220 ;$:') $/& ,.)&,( &7(** (+16. ,(+&( 0&+$()& )(/( +..+&>[...]

  • Page 53

    53 ESP A ÑOL (Instrucciones or iginales) Explicación de los dibujo s ESPECIFICACIONES #D e b i d o a n u e s t r o p r o g r a m a c o n t i n u o d e i n v e s t i g a c i ó n y d e s a r ro llo, las e spec ificac ione s aqu í des critas está n suje tas a cambio s sin p revio aviso. #L a s e s p e c i f i c a c i o n e s p u e d e n s e r dif[...]

  • Page 54

    54 Guarde todas las advertencias e instrucciones p ara futuras consult as. ADVERTENCIAS DE S EGURIDAD DEL CORT ASETOS A BA TERÍA GEB062- 2 1. Sujete la herram ienta eléctr ica sola mente por la s superf icies d e aga rre ai sladas , ya q ue la hoja de corte puede entrar en co ntacto co n cabl es ocultos. Si ent ra en co ntacto con un c able con c[...]

  • Page 55

    55 información insuficiente se pondrán en riesgo a el los mismos y pondrán en riesgo a otros a causa de un manejo incorrecto. 2. Nunca deje que personas que no estén familiar izadas con estas inst rucciones, personas (incluyendo ni ños) con capacidades físi cas, sensoriales o ment ales reduc idas, o fa lta de e xper ienci a y co nocim iento s[...]

  • Page 56

    56 8. Inspec cione peri ódicam ente l a her ramien ta de cor te para c om pro bar s i hay d año s (c om pru eb e s i hay grietas fi nas m edia nte pru ebas d e so nido). 9. Antes d e com enzar a co rtar , la he rrami enta de corte debe al canz ar la velocid ad de trabaj o compl eta. 10. La herram ienta de corte debe e star eq uipada c on la prote[...]

  • Page 57

    !" DESCRIPCIÓN DEL FUNCIONAMIENTO PRECAUCIÓN: #$ % & ' ( ) * ' ) + , - ( & + . ) / ) * ' ) 0 / 1 2 . / 3 + . ) 4 + ) 5 ' . . + 1 6 ' % & + 7 ) +('89.'(')(6'12.')*'):-' )'(&;)+2+8+*+)<) *'):-')4+) 3+&'.=+)5+)(6 */)'>&.+=*+? Insta[...]

  • Page 58

    58 Para co rtar el lat eral de un seto de form a unifo rme, resulta útil cortar desde la p arte inferior hacia arriba. (Fig. 10) Corte madera de boj o rododendro desde la ba se h acia la part e sup er io r pa ra l ogr ar un a sp ect o a tr ac tiv o y u n bu en trabajo. Instalación o extracción del receptor de virutas (accesorio) PRECAUCIÓN: >[...]

  • Page 59

    !" #$%$&'()%*+),',-.%%*+)/(),$01 ()*%)0(23+)().4+15%(%*+)/() 6$07*)&'()%*),%*2.8*)/()%*)-(00*7.(41*)(4,*8()(4)(%)$0.6.,.$) /()%*+) ,',- .%%*+) /(), $01(9): 4,*8( )%*);*01 ()/$<%* /*)/() %*) ;%*,*)< *+()/ ()%*+) ,',- .%%*+ )/(),$0 1()(4) %*)0*4 '0*)/( )%*) ,*0,*+*)/()%*)-(00*7.(41 *9)=),$41. 4'*,[...]

  • Page 60

    60 NOT A: #N o l i m p i e l a g r a s a d e l o s e n g r a n a j e s o d e l c i g ü e ñ a l . D e lo contrario, podría dañar la her ramienta. #P a r a o b t e n e r i n s t r u c c i o n e s p a r a e x t r a e r e i n s t a l a r l a s cuchil las con sulte l a pa rte po sterior de un paqu ete de accesorios de cuchillas. (Fig. 33) Para in st[...]

  • Page 61

    !" #$ % & ' ( ) ( & * + ( & , - . & / + / 0 1 , , - . & ' ( & / % 2 3 ( & ( 4 3 2 ( 4 & ( 4 & / % 4 3 - / 3 % & /%4&(,&.+(,%&'+2- 43(&.+&5+4/1%4-61(43%7 &8-.&/+/01,,-.& .(&9+('(4&'(.- 51,-2 :&,%&*+(&92%;%/-2<-&+ 4&2(4[...]

  • Page 62

    62 PORTUGUÊS (Instruçõ es de origem) Descrição geral ESPECIFICAÇÕES #D e v i d o à p e s q u i s a e d e s e n v o l v i m e n t o c o n s tante s, esta s e spe ci f icações estão sujeitas a al teração sem avis o prévio . # Estas especificações podem diferir de país para país. #P e s o d e a c o r d o c o m p r o c e d i m e n t o[...]

  • Page 63

    63 AV I S O S D E S E G U R A N Ç A D O AP ARADOR DE SEBES ELÉCTRICO GEB062- 2 1. Apenas segure na ferra menta eléctr ica pelas superf ícies d e peg a iso ladas , uma v ez q ue a lâmina de corte pode tocar em cabos eléctricos escondi dos. As lâminas de c orte em contact o com um fio eléctrico ligad o à corre nte podem electri ficar as peç[...]

  • Page 64

    64 ou fal ta de exp eriên cia e conhe cime nto, ut ilizem o equipame nto. As regu lamentaç ões l ocais podem restr ingir a ida de do opera dor. 3. Utiliz e o eq uipament o com o máx imo d e cui dado e atenção . 4. Opere o equipam ento a penas se es tiver em boa s condições físicas. Efectu e todos os trabal hos c om calma e cuidado. T enha [...]

  • Page 65

    65 11 . T o d a s a s i n s t a l a ç õ e s de protecçã o e re sguard os fornecido s com es te equi pamen to dev em ser usado s durante o func iona mento. 12. Retire se mpre a bater ia do e quipame nto. - sempre que deixa r o equipamento sem supervi são; -a n t e s d e e l i m i n a r u m b l o q u e i o ; -a n t e s d e v e r i f i c a r , l [...]

  • Page 66

    !! "# $ % & ' ( ' ) * + & , % ) * + & + % & - . / ' ) - ) & + & 0 + 1 ' ) - + 2 & 3 ' & . $ % & ' . 4 + - ( + ) & ,+4-56'.1'&7&8%)9:' &.$%&'/1;&4%))'41 +6'.1'& 8%/-4-%.+<+2 Acção do interruptor (Fig. 2) PRECAUÇ[...]

  • Page 67

    67 MANUTENÇÃO PRECAUÇÃO: #C e r t i f i q u e - s e s e m p r e d e q u e a f e r r a m e n t a e s t á desligada e a bateria removida antes de efectuar operações de inspecção ou de manutenção. Limp ar a fe rramenta Limpe a ferra menta r etira ndo o pó com um pan o sec o ou embebi do em sab ão. PRECAUÇÃO: #N u n c a u t i l i z e g a[...]

  • Page 68

    !" #$%$&'$ ()*%&+, &(-.*/, &0*&1234 56786 &*&9:6;: <:=6=2> & $,&%*?$%$ @A*, >&/(,?* B@C+& *& ,DE,)/)D/@C+&0$, &*,B+.$,&0*& B$%.C+&*&+D)%$,&+?*%$@A* ,&0*&'$(D)*(@C+&+D&$FD,)*& 0*.*'& ,*%&* G*BD )$0$,&?+ %&B*() [...]

  • Page 69

    !" #$%&'$()(%) *+)(,)(-.*&/)($( ,$+0&1(-&23$()(4$'')*$/ %)( +)') (5 $'& 4&6 )' (1 $(4 3/ 6& 0/ )(, $5 &,) *$ /% $7 NOT A: 89 3 ) / , 0 ( ) 1 ( - . * & / ) 1 ( , ) ( % $ 1 0 3 ' ) ( / : 0 ( 4 3 / 6 & 0 / ) * ( ,$5&,)*$/%$;()(&/1% )-)<:0($/%'$()1(-.*&/[...]

  • Page 70

    !" Apenas pa ra os p aíses europeus #$%"&'( ) Declaração de conformidade CE A Makit a Corporation, na qualidade do fabric ante responsáve l, declara q ue a(s) má quina(s) M akita seguin te(s): *+,-./012345046789-/0: 4 ;<0=053=45+ 4>+=>04?-?0404@0A+=-0 $BC45+4635+D3EF -<3:4G%&""* #,<+>-H->01[...]

  • Page 71

    71 DANSK (Origina lvejledning) Forklar ing til generel oversi gt SPECIFIKA TIONER #P å g r u n d a f v o r e s l ø b e n d e f o r s k n i n g s - o g u d v i k l i n g s p r o g r am kan s peci fikati onerne heri ændres uden f orudg ående varsel. #S p e c i f i k a t i o n e r n e k a n v a r i e r e f r a l a n d t i l l a n d . #V æ g t i h[...]

  • Page 72

    72 SIKKERHEDSADV ARSLER FOR BA TTERIDREVET HÆKKEKLIPPER GEB062- 2 1. Hold kun maskinen i de is olerede gribeflader , da kniven e kan komme i ko ntakt med s kjulte ledninger . Hvis kniven e kommer i kontakt med en strømførende ledning, kan udsatte meta ldele på maskinen blive strømførende, hvorved operatøren kan få elektrisk stød. 2. Hold a[...]

  • Page 73

    73 situationer , der måtte opstå mod andre personer eller deres e jende le. 5. Anvend aldri g mas kinen m ens d er er person er , isæ r børn, e ller k æledyr i nær heden. 6. Anvend aldri g mas kinen e fter indtage lse af alkoh ol eller m edic in, el ler hv is du føler d ig træ t elle r dårl igt tilpas. 7. Motoren skal slukk es ø jebli kke[...]

  • Page 74

    !" #$%&'(%&$)*+'&,'--'&,&' ./*&0./,12,31#$0.'.,'--'&, #$%&'(%&$)*+')4 54 67.)&7- -'&,27 &,-*# ',87- )',7/,8 '#$1 90/'9', 9'-',# 73, 24'$#4,&'( .'&,0,#$% &':9#);&' )4 [...]

  • Page 75

    75 Bemærkn ing 1: Tidspunktet for hvornå r indik atorla mpen ly ser varierer afhængigt af tempe raturen på arbejdsstedet og batteripakkens til stand. BETJENING Se Sikke rhedsa dvarsle r inde n anve ndelse . FORSIG TIG: @S ø r g f o r , a t d u i k k e u t i l s i g t e t k o m m e r i k o n t a k t m e d e t metalhegn eller a ndre hårde genst[...]

  • Page 76

    76 #N å r d u u d s k i f t e r s v æ r d e t , s k a l d u a l t i d b æ r e h a n d s k e r og undgå at fjerne knivhylsteret, så hænder og an sigt ikke kommer i direkte kontakt med svær det. Ellers kan det medføre personskader . BEMÆRK: #T ø r i k k e f e d t e t a f g e a r e t e l l e r k r u m t a p p e n . H v i s d u g ø r det, ka[...]

  • Page 77

    77 MONTERING FORSIG TIG: "S ø r g a l t i d f o r , a t m a s k i n e n e r s l u k k e t , o g a t batteripakke n er taget ud, før du udfører nogen form for arbejde på maskinen. Montering eller afmonter ing af knivhylster (Fig. 31 og 32) FORSIG TIG: "S ø r g f o r i k k e a t r ø r e v e d k n i v e n n å r d u m o n t e r e r e l[...]

  • Page 78

    !" #$ % & ' ( ) * ( ) + , & - ) . / 0 , ' - ) 1 - ) 1 % + 2 % & 2 ) . 1 * 3 , % 2 % ) , ) * - 2 ' 2 % & 2 ) *40*3,%5) 678)49.783*4.) 9()&,%):;*,*32) -,0*-1%&)%(8) &/) 1%+2%&28).1*3,%2%5) (Fig. 49) <7%&).1*3,%2%)2: -28)=/*-28,%')1:)30,992>?=&2% )4')>40&) &2%)*(&am[...]

  • Page 79

    79 ǼȁȁǾȃǿȀǹ ( ȆȡȦ IJȠȖİȞİȓȢ ȠįȘȖȓİȢ ) īİȞȚțȒ ʌİȡȚȖȡĮijȒ Ȇȇȅ ǻǿǹīȇ ǹĭǼȈ # ȁȩȖȦ IJȠȣ ıȣȞİȤȩȝİȞȠȣ ʌȡȠȖȡȐȝȝĮIJȠȢ ʌȠȣ İijĮȡȝȩȗ Ƞȣȝİ ȖȚĮ ȑȡİȣȞĮ țĮ Ț ĮȞȐʌIJȣȟȘ , IJĮ IJİȤȞȚțȐ ȤĮȡ Į ț IJȘ ȡ Ț ıIJ Ț țȐ ıIJȠ ʌĮȡȩ Ȟ ȑȞIJȣ[...]

  • Page 80

    80 īİȞȚțȑȢ ȆȡȠİȚįȠ ʌ ȠȚȒıİȚȢ ǹıijĮȜİȓĮȢ ȉȠ ȣ ǾȜİțIJȡȚț ȠȪ ǼȡȖĮȜİȓȠȣ GEA010- 1 ȆȇȅǼǿǻ ȅȆȅǿǾȈǾ ǻȚĮȕȐıIJİ ȩȜİȢ IJȚȢ ʌȡȠİȚįȠʌ Ƞ ȚȒıİȚȢ ĮıijĮȜİȓĮȢ țĮȚ ȩȜİȢ IJȚȢ ȠįȘȖȓİȢ . ǹȞ įİȞ ĮțȠȜ ȠȣșȒıİIJİ ȩȜİȢ IJȚȢ ʌȡȠİȚįȠ[...]

  • Page 81

    81 ȆȇȅǼǿǻ ȅȆȅǿǾȈǼǿȈ ǹȈĭ ǹȁǼǿǹȈ ȉȅȊ ȌǹȁǿǻǿȅȊ īȇ ǹȈǿǻǿȅȊ ȂȆǹ ȉ ǹȇǿǹȈ GEB070- 2 ȆȇȅǼǿǻ ȅȆȅǿǾȈǾ ! ȈǾȂǹȃȉǿȀ ȅ , ǻǿǹǺǹȈȉǼ ȆȇȅȈǼȀȉǿȀǹ ȩȜİȢ IJȚȢ ʌȡȠİȚįȠ ʌȠȚȒ ıİȚȢ Įı ijĮȜİȓĮȢ țĮ Ț IJȚȢ ȠįȘȖȓİȢ Ȇȇǿȃ ǹȆȅ ȉǾ ȋȇǾȈǾ[...]

  • Page 82

    82 İȟȐȡ IJȘȝĮ ȝİ ȗȘ ȝȚ Ȑ șĮ ʌȡȑʌİȚ ȞĮ İʌȚıțİȣĮıIJİȓ Ȓ ȞĮ ĮȞIJȚțĮIJĮıIJ Įșİȓ ıİ İȟȠȣıȚȠįȠIJȘȝȑȞȠ țȑȞIJȡȠ ıȑȡȕȚȢ İțIJȩȢ İȐȞ įȘȜȫȞİIJĮȚ įȚĮijȠȡİIJȚț Ȑ ıIJȠ ʌĮȡȩ Ȟ İȖȤİȚȡȓįȚȠ . 4. ǼȞİȡȖȠʌȠȚȒıIJİ IJȠȞ țȚ ȞȘIJȒȡ Į ȝȩ[...]

  • Page 83

    !" #$ ȂȘȞ ĮʌȠșȘțİȪİIJİ IJȠ İȡȖĮȜİȓȠ țĮȚ IJȘȞ ȝʌĮIJĮȡȓĮ ıİ ȝȑȡȘ ȩʌȠ ȣ Ș șİ ȡȝȠțȡĮıȓĮ ȝʌȠȡİȓ ȞĮ ijIJȐı İ Ț Ȓ ȞĮ ȟİʌİȡȐıİȚ IJȠ ȣ Ȣ 50°C (122°F). %$ ȂȘȞ ĮʌȠ IJİijȡȫȞİIJİ IJȘȞ ȝʌĮIJĮȡȓĮ Įț ȩȝȘ țȚ ĮȞ ʌĮȡ Ƞ ȣı Ț Ȑ ȗİ Ț ıȠȕ?[...]

  • Page 84

    !" ȃĮ # ȝȘȞ # ʌȡȠıʌĮșȒıİIJİ # ȞĮ # țȩȥİIJİ # țȜĮįȚȐ # ȝİ # įȚȐȝİIJȡȠ # ʌȐȤȠ ȣȢ # ȝİȖĮȜȪIJİȡȘ # Įʌȩ #$%#&&# ȝİ # ĮȣIJȩ # IJȠ # ȥĮȜȓįȚ '# ǹȣIJȐ # șĮ # ʌȡȑʌİȚ # ȞĮ # țȠʌȠȪȞ # ʌȡ ȫIJĮ # ȝİ # ȥĮȜȓįĮ # ȝȑȤȡȚ # IJȠ # İʌȓʌİįȠ # [...]

  • Page 85

    !" ǺȖȐȜIJİ # IJȠ # țȐIJȦ # țȐȜȣȝȝ Į # Įʌȩ # IJȠ # İȡȖĮȜ İȓȠ $# ( ǼȚț . 17) ȄİıijȓȟIJİ # IJȚȢ # įȣȠ # ȕȓįİȢ # ȝİ # ȑȞĮ # ȞȩȝȚıȝĮ # Ȓ # țȐIJȚ # ʌĮȡȩȝȠȚ Ƞ # țĮȚ # ĮijĮȚȡȑıIJİ # IJȚȢ # ȜİʌȓįİȢ # IJȠȣ # ȥĮȜȚįȚȠȪ $ ȈǾȂǼǿȍȈǾ : % ȂȘȞ # ĮijĮ[...]

  • Page 86

    86 # ȆȡȠıȐȡ IJȘȝĮ ȝĮțȡȚȐȢ ȜĮ ȕȒ Ȣ ( ȖȚĮ IJȠ ȌĮȜȓįȚ īȡĮıȚįȚȠȪ ) ȈȊȃǹȇȂȅ ȁ ȅīǾȈǾ ȆȇȅȈȅȋǾ : # ȃĮ ȕİȕĮȚȫȞİıIJİ ʌȐȞIJ ȠIJİ ȩIJȚ ȑȤİIJİ ıȕȒıİȚ IJȠ İȡȖĮȜİȓȠ țĮȚ ȑȤİIJİ ȕȖȐȜİ Ț IJȘȞ ȝʌĮIJĮȡȓĮ ʌȡȚȞ İțIJİȜȑıİIJİ ȠʌȠȚĮįȒʌ[...]

  • Page 87

    !" īȚ Į # ȞĮ # IJȠʌȠșİIJȒı İIJİ # IJȠ # ʌȜĮȓıȚȠ # IJȘȢ # ȕȐıȘȢ $# IJĮ Țȡ ȚȐ ıIJ İ # IJȘȞ # ʌȡȠİȟȠ ȤȒ # IJȘȢ # ȕȐıȘȢ # IJȠȣ # ʌȜĮȚıȓȠȣ # țȠȞIJȐ # ıIJȠ # ȝȠȤȜȩ # ĮȜȜĮȖȒȢ # ȝȑıĮ # ıIJȘȞ # IJȡȪʌĮ # ȖȚĮ # IJȘȞ # ĮȞIJȓıIJȠȚȤȘ # ȡȪșȝȚıȘ # ?[...]

  • Page 88

    ALA Makita Corporation Anjo, Aichi, Jap an 884948- 999[...]

  • Page 89

    Model No. Description PRODUCT C ONCEPT AND MAIN APPLICA TIONS P 1/ 8 UH200D (HU01*) Cordless Hedge T rimmer 200mm (7-7/8) Model UH200D is 200mm Cordless hedge trimmer powered by 10.8V/ 1.3Ah Li-ion battery BL1013. Its main features are: Lightweight and compact design for easy handling Optional Grass shear blade kit can convert this model into Model[...]

  • Page 90

    P 2 / 8 R epair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [1] LUBRICA TIONS Fig. 1 Item No. Apply the following lubricant to protect parts and product from unusual abrasion. Description Crank Helical gear 47 Housing complete (L) Gear 12-31 Gear teeth with which Helical gear 47 and DC motor[...]

  • Page 91

    Shear blade assembly P 3 / 8 Fig. 2 R epair [2] DISASSEMBL Y/ASSEMBL Y [2]-1. Gear 12-31, Helical gear 47 DISASSEMBLING (1) Remove Blade, Crank and Housing set (R) as illustrated in Fig. 2 . 3. Loosen two M4 Countersunk head screws, and then remove Shear blade assembly . Under cover complete 4. Remove Crank complete and Dust guard. Dust guard 2. Re[...]

  • Page 92

    P 4 / 8 R epair [2] DISASSEMBL Y/ASSEMBL Y [2]-1. Gear 12-31, Helical gear 47 Fig. 4 Fig. 5 Fig. 6 ASSEMBLING (1) Assemble Helical gear 47, Gear 12-31. ( Figs. 4, 5 ) And mount them to Housing set (L). ( Fig. 6 ) Crank side of Helical gear 47 1. Face the crank side of Helical gear 47 to the bottom. 2. Assemble two Pins 4 to Helical gear 47 by press[...]

  • Page 93

    P 5 / 8 R epair [2] DISASSEMBL Y/ASSEMBL Y [2]-2. DC motor Fig. 8 Fig. 9 DISASSEMBLING (1) Disassemble DC motor . ( Fig. 8 ) Set plate 1. Remove Set plate and separate Housing set (R) by unscrewing five 3x16 T apping screws. 2. DC Motor can be removed from Housing set (L). 3x16 T apping screw (5pcs.) Housing set (R) DC motor Housing set (L) ASSEMBL[...]

  • Page 94

    P 6 / 8 R epair [2] DISASSEMBL Y/ASSEMBL Y [2]-3. Shear blade assembly 1. Adjust Crank complete to the position as drawn below . Joint of Housing set (L) and Housing set (R) 2. Align the Holes of Shear blade A and B to the Hole of Guide plate in order to set M4 Pan head screw as a positioning pin. M4 Pan head screw Shear blade B Guide plate Shear b[...]

  • Page 95

    C ircuit diagram P 7 / 8 Fig. D-1 White Color index of lead wires' sheath Black Red Blue LED (W arning lamp for battery) DC Motor Controller Line filter Switch T erminal Line filter is not used for some countries. W iring diagram Fig. D-2 1. Find T erminal marked with Red dot marking . 2. Now connect the Lead wire (white) receptacle to the T e[...]

  • Page 96

    P 8 / 8 Fig. D-6 Fig. D-5 Switch Fix Controller´s Lead wires (red, black) in this Lead wire holder. Connect Receptacles to the Switch with facing the wire connecting portion to the Housing set (L) side in order to put the Lead wires on the Housing set (L). Connect Receptacles to the T erminal with facing the wire connecting portion to Housing set [...]