Newcon Optik an 8x30m22 manuel d'utilisation

Operation Manual AN 8x30M22 Daytime Binoculars NSN # 6650-20-007-7029 105 Spar ks Ave., Toro nto, ON M 2H 2S5, Canada[...]

Table of Contents 1.  BRIEF DESCRIPTION ............................................ 1  2.  SPECIFICATIONS .................................................. 2  2.1  Shared specifications .............................................. 2  2.2  AN 8x30M22 detailed specifications ...................... 3  3.  DESIGN AND APPE[...]

6.7  Calculating target's size using angle readings ....... 14  7.  STORAGE AND MAINTENANCE ...................... 15  8.  WARRANTY ......................................................... 16  9.  CUSTOMER SUPPORT ........................................ 18  10.  QUALITY CERTIFICATE .................................[...]

1 1. BRIEF DESCRIPTION The AN daytime binoc ulars AN 8x30M22, The binoculars are designed an d manufactured to military specifications and provide e xcellent brightness, im age clarity and true im age color . The built-in range finding reticle, M22 standard, ena bles measurements of horizontal and vertical angles, as well as calculation of height, [...]

2 2. SPECIFICATION S 2.1 Shared spe cifications Prisms BAK4 Coating FMC Brightness i ndex 50.4 Interpupillary adjustment distance 56-74 mm M22 Reticle Yes Operating te mperature ra nge –40°C … +7 0°C All binoculars are waterp ro of and shockproof (will withstand a d rop test from 1.8m ).[...]

3 2.2 AN 8x30M22 detailed specifications AN 8x30M22 Magnification 8x Objective lens diameter 30 mm Focus 3 m – inf. Field of view 8° Apparent field of view 60° FOV @1000 m 132 m FOV @1000 yd 396 ft Exit pupil 3.8 mm Eye relief 17 mm Weight 0.545kg Dimensions, LxHxW, mm 110x156x55[...]

4 3. DESIGN AND APPEARANCE 3.1 Optical desi gn Optical design of the binoculars is present ed on Fig. 1. 1 – objective lens 2 – erective prism s 3 – reticle lens 4 – eyepiece The light from the object or target y ou are looking at enters the binoculars through the objective le ns system (1, Fig. 1[...]

5 Fig. 1). Due to the objective lens, the image at this point is turned upside down. However, as the im a ge passes through the prism system, (known as the erective prisms) (2, Fig. 1) it becom es right side up (erect) and c hanged from right to left, to left to right. After the prisms the image rays pass through the reticle lens (3, Fig. 1) and th[...]

6 1 4. BODY ASSEMBLY 1 – Objective lens 2 – Objective prot ective cap 3 – Binocular body 4 – Individual focus adjustment rings 5 – Eyepieces Fig. 3 1 3 4 5 2[...]

7 5. DELIVERY SET Q-ty Notes Binoculars 1 Carrying strap 1 Lens cleaning cloth 1 Soft case with carrying strap 1 Eyepiece cover 1 Tripod adapter 1 Manual 1[...]

8 6. OPERATION INSTRUCTIONS 6.1 Interpupillary distance adjustment Prior to use you may like to adjust the binoculars to the distance between your eyes (interpupillary distance). Holding the bino culars in both hands rotate its h alves until you see one round image. Note: The image may not be clear at this step. You will focus it in the next step. [...]

9 6.3 Measurin g horizontal an gle using the reticle An M22 reticle built into these binoculars enab les measuring height , distance and size of a target, as well as angle between two close targets. Though reticle appearance m ay differ fr om one m odel to anothe r as described in 3. 2, the descript ion below is valid for all models. When the angl [...]

10 When the angle between two targets is larger than the angle measuring range (100 m ils), it can be measured in several steps. The horizontal angle of cruiser shown i n Fig. 5, i s 130 mils (60+ 70=130). 6.4 Measurin g vertical angle using the reticle Vertical angle measurement is sim ilar to horizontal angle measuring. When height of the target [...]

11 For targets taller than the reticle scale, perform measurement in steps in the same way as it is described for the horizontal angle measurem ent. Fig. 6.[...]

12 6.5 Using the reticle to calcul ate distance To determine the distance to the target use the form ula: D = H/K, wher e D – distance to target i n km, H – estimated height of t he target in m, K – vertical angle of the target in mil. First, estimate the height (or width) of the target, then measure target’s horizontal (vertical) angle and[...]

13 Place the lower edge of the target at the horizontal line on the reticle. The reading of t h e scale at the point whe r e target’s 2 m level touches the scale is the distance in meters. Assuming t hat vehicle on the Fig. 7 is 2 m high; the distance to it is 550m. Fig. 7[...]

14 6.7 Calcul ating target's size using angle readi ngs To calculate height and width user will n eed to estimate the distance to the target an d measure its ho rizontal and vertical angles. Then usin g the form ula for distance measurement one can calculate target’s height: H=DxK, where K is vertical angle i n mils, D is distance in meters [...]

15 7. STORAGE AN D MAINTENANCE The binoculars are precision optical instruments that should be carefully hand led and properly maintained to keep them in a good worki ng order. Clean the lenses after each use with special optical cloth. Never wipe the lenses wi th fingers; grease may dam age the optics coating. Never use anything to wipe the len se[...]

16 8. WARRANTY NEWCON warrants this product against defects in material and workmanshi p for one year f rom the date of the original purchase. Longe r warranty is available, subject to the terms of the specific sales contract. Should your Newcon pr oduct prove to be defecti v e durin g this period, please deliver the produc t securely packaged i n [...]

17 are your responsibility. If shipping from North America please include a cheque or money or der payable to NE WCON OPTIK f or the amount of $15.00 to cover handlin g and ret urn shipping.[...]

18 9. CUSTOMER SUPPORT Should you experience an y difficulties with your NEWCON OP TIK product, consult the enclose d manual. If the problem remains unreso lved, contact our custom er support department at ( 416) 663-6963 or toll free at 1- 877-368-6666 . Our oper ating hours are 9 am-5pm, Monday - Friday, Eastern Standard Time. At no tim e should [...]

19 10. QUALITY CERTIFICATE The binoculars serial nu mber________________ _______ complies wit h all technical speci fications and has passed the inspection. Date of produc tion: _____________ ____________ ________ Quality Inspector: _____________ ____________ _________ Quality Assurance Seal[...]

[...]

NEWCON OPTIK  Printed in Canada R1 – 12.12[...]