Weslo WLTL49806.0 инструкция обслуживания

Model No. WLTL49806.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction . If you have questions, or if parts are damaged or mi[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . .[...]

1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that bloc[...]

4 20. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD A ND MOVE THE TREADMILL on page 20.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 2 1. When folding or moving the treadmill, make sure that the storage latch is fully close[...]

5 T hank you for selecting the new WESLO ® C ADENCE 6 0 SE treadmill. The CADENCE 60 SE treadmill com- bines advanced technology with innovative design to help you get the most from your exercise in the conve- nience of your home. And when you’re not exercising, the CADENCE 60 SE treadmill can be folded up, requir- ing less than half the floor s[...]

ASSEMBL Y To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of th e pack ing ma teria ls unt il ass embly is com pleted . Note: The underside of the treadmill walking belt is coated wit[...]

7 3. Orient the Right Upright (36) as shown, and at- tach it to the Base (48) with two Upright Bolts (27) and two Upright Star Washers (39); do not tighten the Upright Bolts yet. 48 36 39 39 27 3 4. Set the Base (48) near the front of the treadmill, with the Power Cord (13) on the Hood (1) as shown. Cut the small tie (not shown) holding the Upright[...]

8 5. See the left inset drawing. Identify the two Frame Spacers (34). Open the included packet of g rease, and apply grease to both sides of both Frame Spacers. Then, identify the outer side of e ach Frame Spacer. Next, hold a Frame Spacer (34) between the Right Upright (36) and the Lift Frame (59), with the outer side of the Frame Spacer facing th[...]

9 9. While another person holds the Console Base (26) near the right Handrail (18). Connect the console wire to the Upright Wire (28) as shown in the inset drawing. Important: If the connec - tors are oriented correctly, they will slide to- gether easily and snap into place. If the con- nectors are not oriented correctly, the con- sole may be damag[...]

10. Lower the Uprights (31, 36). S ee the inset drawing. Position the Uprights (31, 36) so that the treadmill Frame (74) is centered b etween the Uprights. See steps 2–6. Firmly tighten the Upright Bolts (27) and the Frame Bolts (32) on each side of the treadmill. Do not overtighten the Frame Bolts. 36 3 1, 36 32 74 74 31 View from Above Side Vie[...]

1 1 14. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 22). To protect the floor or carpet, place a mat under the treadmill. 13. Press the Latch Sleeve (30) into the Left U[...]

12 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CO[...]

13 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measure[...]

14 H OW TO USE THE MANUAL MODE Insert the key into the console. See HOW TO TURN ON THE POWER on page 1 3. Enter your weight if desired. For the most accurate calorie count, enter your weight into the console by pressing the Weight increase and decrease buttons repeatedly. Note: Once you have entered your weight, your weight will be saved in memory.[...]

15 Note: For the treadmill to count your steps accu- rately, correct walking form is important. As you w alk, try to maintain a steady pace, a uniform stride length, and a consistent position on the t readmill. Lighter users may also find it helpful to reduce the incline of the treadmill or to increase the speed of the walking belt. IMPORTANT: Alwa[...]

16 H OW TO USE A DISTANCE PROGRAM I nsert the key into the console. See HOW TO TURN ON THE POWER on page 1 3. S elect a distance program. To select a distance pro- gram, press the Distance Goal Programs button once or twice until a distance goal of 5.000 or 10.00 (kilometers) appears in the left side of the display. When a distance program is selec[...]

17 H OW TO USE A STEP PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. S elect a step program. To select a step pro- gram, press the 10,000 Steps Program but- ton or the Goal in- crease but- ton; if you press the 10,000 Steps Program but- ton, a goal of 10,000 steps will appear in the upper display. Note: If the w[...]

18 H OW TO USE A CALORIE GOAL PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. E nter your weight. See step 2 on page 14. Note: Always enter your weight before using a calorie goal program; the speed and incline settings of the program will depend on the weight setting you enter. Select a calorie goal program. To [...]

19 Follow your progress with the display. See step 6 on pages 14 and 15. Measure your heart rate if desired. S ee step 7 on page 15. Turn on the fan if desired. See step 8 on page 15. When the program is completed, remove the key from the console. See step 9 on page 15 THE INFORMATION MODE T he console features an information mode that keeps track [...]

HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold t[...]

21 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the[...]

22 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 12. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the hex key, [...]

23 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

P ART LIST—Model No. WL TL49806.0 R1006A Key No. Qty. Description Key No. Qty. Description 1 1 Hood 2 34 3/4" Screw 3 1 Left Foot Rail 4 8 Foot Rail Screw 5 2 Motor Tension Bolt 6 2 Motor Tension Washer 7 12 Wire Tie 8 2 Motor Bolt 9 1 Drive Motor 10 1 Motor Bracket 11 4 Sliver Ground Screw 12 2 Power Bracket Star Washer 13 1 Power Cord Asse[...]

3 4 Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of the User’s Manual. REMOVE THIS EXPLODED DRA WING AND P ART LIST FROM THE MANUAL Save this EXPLODED DRA WING and P ART LIST for future reference.[...]

36 96 1 5 8 39 9 5 6 10 53 33 47 59 58 57 13 1 1 97 1 1 2 2 16 17 18 30 2 17 21 22 17 28 2 21 22 20 17 18 31 34 33 32 34 32 33 48 39 27 39 27 37 2 28 1 1 45 14 44 44 35 35 44 45 44 14 23 29 50 51 2 38 38 38 56 47 54 46 55 60 47 54 38 62 61 54 66 24 64 65 66 72 73 4 4 3 71 68 4 4 78 78 76 83 38 81 82 85 84 97 82 81 79 80 38 76 4 4 74 75 4 68 4 63 24[...]

LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The drive motor is warranted for five (5) years after the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase. This warranty extends [...]