Weslo WETL25905.1 инструкция обслуживания

Model No. WETL25905.1 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Serial Number Decal QUESTIONS? As a manufacturer , we are com- mitted to providing complete customer s[...]

2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ASSEMBL Y . . . .[...]

3 1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2.5 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the treadmill on any surfac[...]

4 2 3. DANGER: A lways unplug the power cord immediately after use, before cleaning t he treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing o ther than the procedures in this manual should be pe[...]

5 BEFORE YOU BEGIN Thank you for selecting the new WESLO ® CADENCE 600 treadmill. The CADENCE 600 treadmill is designed to help you reach your exercise goals in the c onvenience and privacy of y our ho me. And when you’re not exercising, the unique CADEN CE 600 can be folded up, requiring less than half the floor space of other treadmills. For y[...]

6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not d ispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top[...]

7 3. Hold a Frame Spacer (27) against the right side of the F rame (79) as shown. Insert a 4” Bolt (70) into the indi- cated hole in the Frame Spacer and the Frame. Next, tighten a 3/4” T ek Screw (3) into the Frame Spacer and the Frame. Then, remove the Bolt. Repeat this step on the other side of the Frame. 3 70 3 79 27 4. Raise the Right Hand[...]

8 7. Orient the Crossbar (91) with the large hole at the right of the smaller hole as shown. Set the Crossbar against the Handrails (53, 59) with the brackets on the Crossbar aligned with the two small holes in each Handrail. Attach the Crossbar with two Crossbar Star W ashers (93) and two Crossbar Screws (92). Do not tighten the Crossbar Screws ye[...]

9 12. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 18). T o pro- tect the floor or carpet, place a mat under the treadmill. 10. Lower the Handrails (53, 59) until they are touching the floor . See 1[...]

10 THE PRE-LUBRICA TED WALKING BEL T Y our treadmill features a walking belt coated with high-performance lubricant. IMPORT ANT : Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deteri- orate the walking belt and cause excessive wear . HOW TO PLUG IN THE POWER CORD This product must[...]

1 1 ETWE25905 (WETL25905) FEA TURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the t ouch of a button. As you exercise, the console will display continuous exercise feedb[...]

12 Insert the key into the console. See HOW T O TURN ON THE POWER on page 1 1. Select the manual mode. When the key is insert- e d, the manual mode will be selected; three zeros will appear in the T ime/Pace zone of the display . If a pro- gram has been selected, remove the key and then reinsert it to select the manual mode. Press the Start button [...]

13 The T ime/Pace zone of the display will show t he total number of hours that the treadmill h as been used. The Distance zone of the display will show the total number of miles that the walking belt has moved. IMPORT ANT : If a “d” appears in the Digital Speed zone of the dis- play , the console is in the “demo” mode. This mode is intende[...]

14 Press the Start button or the Speed increase button to start the progra m. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed set- t ing fo r the pr ogram. Hold the handrails and begin walking. Each program is divided into 30 one-minute peri- ods. One speed setting is programmed for each peri od. N[...]

15 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: Y ou must be able to safely lift 20 kg (45 lbs.) t o raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the location shown by the arrow at the right. T o decrease the possibility of inj[...]

16 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the frame down until it is past the lock pin. Slowly release the lock knob. 2. Hold the frame firmly with both hands, and lower the frame to the floor . Do not drop the f[...]

17 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below . Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see [...]

18 PROBLEM: The walking belt slows when walked on S OLUTION: a . If an extension cord is needed, use only a 3-conductor , 1mm 2 ( 14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD . Using[...]

19 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physi- cian. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

Part No. 229079 R1005A Printed in Canada © 2005 ICON IP , Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department U nit 4, Revie Road Industrial Estate Revie Road Beeston Leeds, LS1 18JG UK T el: Outside the UK: 0 (044) 1[...]

Handrail Bolt (20)–4 F rame Bolt (32)–2 3/8” W asher (66)–2 W Silver Ground Screw (69)–1 3/8” Star W asher (29)–2 2” Bolt (62)–4 2 1/2” Bolt (65)–4 3/8” Nut (13)–4 5/16” Nut (61)–4 1/2” Silver Screw (90)–1 Crossbar Star W asher (93)–2 3/4” T ek Screw (3)–2 5 3/4” Screw (2)–8 Crossbar Screw (92)–2 1” T[...]

P ART LIST—Model No. WETL25905.1 R1005A 1 1 Motor Hood 2 14 3/4” Screw 3 18 3/4” T ek Screw 4 5 8” Cable T ie 5 4 1” T ek Screw 6 1 W arning Decal, Console 7 3 Cable T ie Clamp 8 2 Foot Rail 9 4 Isolator 10 4 Front Platform Screw 1 1 3 Rear Roller Star W asher 12 2 Incline Leg W asher 13 3 Wheel Nut 14 2 Belt Guide 15 4 Belt Guide Screw 1[...]

61 13 21 21 32 7 4 96 96 22 24 25 26 19 56 76 27 3 47 16 3 10 3 18 51 3 18 39 27 3 8 10 3 3 79 14 73 77 74 72 87 15 80 82 81 83 43 82 81 85 49 43 64 87 80 14 15 8 1 3 3 12 12 41 40 40 62 68 13 63 5 2 57 36 59 46 61 9 60 70 29 62 65 65 65 10 10 31 35 86 32 32 33 63 5 62 63 5 69 70 29 65 66 66 75 1 1 68 13 58 9 9 9 53 63 5 62 2 32 32 2 48 44 42 37 13[...]