Sony CPD-100GS инструкция обслуживания

T rinitr on  Color Computer Display 3-861-541- 21 (1) © 1998 by Sony Corporation Operating Instructions EN CPD-100GS CPD-200GS C[...]

2 Owner’ s Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your dealer regarding this product. Model No. Serial No. W ARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high volt[...]

3 Getting Started F EN ES C T ABLE OF CONTENTS • Macintosh is a trademark licensed to Apple Computer, Inc., registered in the U.S.A. and other countries. • Windows ® is a registered trademark of Microsoft Corporation in the United States and other countries. • IBM PC/AT and VGA are registered trademarks of International Business Machines Cor[...]

4 Getting Started Warning on power connection • Use an appropriate power cord for your local power supply. • Before disconnecting the power cord, wait at least 30 seconds after turning off the power to allow the static electricity on the CRT display surface to discharge. • After the power has been turned on, the CRT is demagnetized (degaussed[...]

5 Getting Started F EN ES C Getting Started Identifying Parts and Contr ols See the pages in parentheses for further details. Front 1 MUTING button (page 7) Mutes the sound. 2 RESET button (page 15) Resets the adjustments to the factory settings. 3 GPE button (page 16) Selects the Graphic Picture Enhancement (GPE) mode. 4 MENU button (pages 7 -15, [...]

6 Getting Started to video output to video output About the supplied Macintosh adapter The supplied Macintosh adapter is compatible with Macintosh LC, Performa, Quadra and Power Macintosh series computers. Macintosh II series and some older versions of Power Book models may need an adapter with micro switches (not supplied). Note Do not short the p[...]

7 Getting Started F EN ES C Getting Started Connecting Y our Monitor’s Speaker You can listen to music, sounds, and other audio files using the speaker in your monitor. Connect the AUDIO IN jack to the audio out jack of your computer’s sound card using the miniplug cord (supplied). Adjusting the sound 1 Press the MENU button. The MENU OSD appea[...]

8 Customizing Your Monitor Introducing the On-scr een Display System Most adjustments are made using the MENU OSD. MENU OSD Press the MENU button to display the MENU OSD. This MENU OSD contains links to the other OSDs described below. 1 COLOR Displays the COLOR OSD for adjusting the color temperature. 2 CENTER Displays the CENTER OSD for adjusting [...]

9 Getting Started F EN ES C Customizing Your Monitor Using the CENTER On-scr een Display The CENTER settings allow you to adjust the centering of the picture. Once the setting is adjusted, it will be stored in memory for the current input signal. 1 Press the MENU button. The MENU OSD appears. 2 Press the ¨ . / > and > ? / / buttons to select[...]

10 Customizing Your Monitor Using the GEOM (Geometry) On- scr een Display The GEOM (geometry) settings allow you to adjust the shape and orientation of the picture. Once the rotation is adjusted, it will be stored in memory for all input signals received. All other adjustments will be stored in memory for the current input signal. 1 Press the MENU [...]

11 Getting Started Customizing Your Monitor F EN ES C Using the ZOOM On-scr een Display The ZOOM settings allow you to enlarge or reduce the picture. Once the setting is adjusted, it will be stored in memory for the current input signal. 1 Press the MENU button. The MENU OSD appears. 2 Press the ¨ . / > and > ? / / buttons to select “ ZOOM[...]

12 Customizing Your Monitor Using the SCREEN On-scr een Display Adjust convergence settings to eliminate red or blue shadows that may appear around objects on the screen. Adjust the CANCEL MOIRE function to eliminate wavy or elliptical lines that may appear on the screen. Once the setting is adjusted, it will be stored in memory for all input signa[...]

13 Getting Started Customizing Your Monitor F EN ES C 4 Press the > ? / / buttons to adjust the settings. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. To reset, press the RESET button while the OSD is on. The selected item is reset to the factory setting. For H CONVERGENCE V CONVERGENCE [...]

14 Customizing Your Monitor Changing the on-screen display position You can change the OSD position (for example, when you want to adjust the picture behind the OSD). 1 Press the MENU button. The MENU OSD appears. 2 Press the ¨ . / > and > ? / / buttons to select “ OPTION,” and press the MENU button again. The OPTION OSD appears. 3 Press[...]

15 Getting Started Customizing Your Monitor F EN ES C Resetting the Adjustments Resetting an adjustment item 1 Press the MENU, ¨ . / > and > ? / / buttons to select the OSD containing the item you want to reset. 2 Press the ¨ . / > buttons to select the item you want to reset. 3 Press the RESET button. Resetting all of the adjustment dat[...]

16 Customizing Your Monitor Preset and User Modes The monitor has factory preset modes for the 9 (CPD- 100GS) or 10 (CPD-200GS) most popular industry standards for true “plug and play” capability. Recommended horizontal and vertical timing conditions Horizontal sync width duty should be 1.0 µsec of total horizontal time. Horizontal blanking wi[...]

17 Getting Started Technical Features F EN ES C u indicator Green Green and orange alternate Green and orange alternate Orange Off Damper Wir es When viewing a white background, very thin horizontal lines are visible on the screen as shown below. These lines are damper wires. The Trinitron tube has a vertically striped aperture grille inside. The a[...]

18 Additional Information W arning Messages If there is something wrong with the input signal, one of the following messages appears. Additional Information The input signal condition “OUT OF SCAN RANGE” indicates that the input signal is not supported by the monitor’s specifications. “NO INPUT SIGNAL” indicates that no signal is input. T[...]

19 Getting Started Additional Information F EN ES C Symptom Check these items Screen image is not centered or sized properly Edges of the image are curved White lines show red or blue shadows at edges Picture is fuzzy Picture bounces or has wavy oscillations Picture is flickering Picture appears to be ghosting Wavy or elliptical (moire) pattern is [...]

20 Additional Information Specifications CPD-100GS Picture tube 0.25 mm aperture grille pitch 15 inches measured diagonally 90-degree deflection Viewable image size Approx. 285 × 214 mm (w/h) (11 1 / 4 × 8 1 / 2 inches) 14.0” viewing image Resolution Horizontal: Max. 1280 dots Vertical: Max. 1024 lines Standard image area Approx. 270 × 202 mm [...]

[...]

Sony Corporation Printed in Japan[...]