Sanyo PLC-XL40 инструкция обслуживания

[...]

2 F eatures and Design ◆ Lar ge Scr een in Limit ed Space Short focus lens allows you to project large images from short distance (p.14). ◆ Antithef t Alar m F unction This projector is equipped with an Antitheft alarm function which sounds when a vibration is detected. (pp.50 – 52). ◆ Secur ity F eatur es The Security function helps you to[...]

3 T able of Contents Tr ademar ks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. F eat ur es and Design . . . . . . . . . . . . . . . . . . .2 Ta ble of Contents . . . . . . . . . . . . . . . . . . . . . .3 To the Owner . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 To the Owner CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE I[...]

5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m[...]

6 Safety Instructions Mo ving the Pr oject or When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case. Care must be taken when handling the projector; do not drop, bump, subject it to strong force[...]

7 Compliance AC Po wer Cor d for the Unit ed Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the plug[...]

8 Bot tom Bac k q Antitheft alarm setting buttons w Focus Lever e Projection Lens r Lens Cover (See page 54 for attaching.) t u !6 !2 !4 !0 !1 CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. e y r t Fr ont Pa rt Names and Functions o i !5 CAUTION Do not turn on the projector with putting the len[...]

9 Pa rt Names and Functions ✽ RESET button A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. Press the RESET button with a pen, then the projector shuts down and restarts. Do not use the RESET function excessively. Rear T er minal S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDI[...]

10 Pa rt Names and Functions T op Contr ol ON - OFF POWER KEYSTONE INPUT W ARNING LAMP REPLACE MENU - VOLUME + VOLUME SELECT q w e t u i o u LAMP REPLACE indicator Turn yellow when the life of the projection lamp draws to an end (pp.56, 62). y WARNING indicator – Lights red light when the projector detects an abnormal condition. – Blinks red wh[...]

11 Pa rt Names and Functions q e w w Button 1–3 Used for the Antitheft alarm setting. e ALARM indicator Blinks red to indicate the battery condition or key operation. q F button Used for the Antitheft alarm setting. Antithef t Alar m Setting But tons These buttons are used for the Antitheft alarm function (pp.50 – 52).[...]

12 Pa rt Names and Functions Remot e Contr ol To ensure safe operation, observe the following precautions: – Do not bend, drop, or expose the remote control to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any other chemicals. t e !0 i !4 r !5 !3 q POWER ON-OFF button Turn the projector on or o[...]

13 Pa rt Names and Functions 1 2 3 To insure safe operation, please observe the following precautions: ● Use two (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid matter. ● Do not expose the remote control to moisture or heat. ●[...]

14 ✔ Notes: • This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image. • All measurements are approximate and may vary from the actual sizes.[...]

15 NO TE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer. To power cord connector on your projector. Pr ojector side AC out[...]

16 Installation Connecting t o a Comput er ON ON S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Cables used for connection • VGA Cables (Mini D-sub 15 pin)* • USB Cable • Audio Cables (Mini Plug: stereo) (*One cable is supplied; [...]

17 S-VIDEO IN MONITOR OUT COMPUTER IN 2 / COMPUTER / COMPONENT AUDIO IN R VIDEO IN L (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 / COMPONENT IN USB SERVICE PORT RESET Installation Connecting t o V ideo Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable (Mini Plug: stereo) (Cables are not supplie[...]

18 Installation Connecting t o Component V ideo Equipment[...]

19 Connect the projector’s AC power cord into an AC outlet. The POWER indicator turns red. Press the POWER ON-OFF button on the top control or on the remote control. The POWER indicator becomes green and the cooling fans start to operate. The preparation display appears on the screen and the count down starts. 2 3 1 16 The preparation display dis[...]

20 Basic Oper ation Press the POWER ON-OFF button on the top control or on the remote control, and “Power off?” appears on the screen. Press the POWER ON-OFF button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of the fans’ quietness and running speed. Se[...]

21 Basic Oper ation Menu bar Pointer (red frame) Menu icon Item data Press the Point 7 8 buttons to adjust the value. SELECT button Pointer (red frame) Press the Point ed buttons to move the pointer. Item Ho w t o Operat e the On-Scr een Menu On-Screen Menu Quit Exit this menu. The projector can be adjusted or set via the On-Screen Menu. For each a[...]

22 Basic Oper ation Menu Bar PC Syst em Menu Used to select the computer system (p.27). Image A djust Menu Used to adjust the computer image from Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness, and Gamma (pp.32–33) Set ting Menu Used to set the projector’s operating configurations (pp.42–49). Sound Menu Used to adjust the[...]

23 Basic Oper ation[...]

24 Basic Oper ation Remote Control Remot e Contr ol Oper ation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER/VIDEO button ✔ Note: • See the next page for the description of other buttons[...]

25 Basic Oper ation Remote Control D.ZOOM buttons NO SHOW button AUTO PC button ✔ Note: • See the previous page for the description of other buttons. KEYSTONE button (See page 23.) POINT ed buttons black out ➜ the captured image ➜ normal ➜ • • • • • Press the NO SHOW button to black out the image. To restore to normal, press the[...]

26 Press the INPUT button on the top control or the COMPUTER button on the remote control to select either Computer 1 or Computer 2. Before using the INPUT or COMPUTER buttons, select the correct input source through Menu operation as described below. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red fra[...]

27 Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon The selected system is displayed. Available system selection. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon. Use the Point ed buttons to [...]

28 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical positions to conform to your computer. Move the red frame pointer to the Auto PC Adj. item and press the SELECT button. “Please wait...” appears while Auto PC adjustment is in process. PC Adjust Menu PC Adjust Menu i[...]

29 Computer Input Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Press the Point 7 8 buttons to adjust the val[...]

30 Computer Input Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area H Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Display area V Reset Store Exit the PC Adjust Menu. Quit To store the adjusted data, select “Store” and then press the SELECT button. Move the re[...]

31 Computer Input Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired level and then press the SELECT button. Move the red frame pointer to the desired level and press the SELECT button. T[...]

32 Computer Input Use the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button. The level of each item is displ[...]

33 Computer Input Store Exit the Image Adjust Menu. Quit To store the adjusted data, select “Store” and press the SELECT button. The Image Level Menu appears. Use the Point ed buttons to choose one of the four image level and press the SELECT button. A confirmation box appears and then select “Yes.” The stored data can be called up by selec[...]

34 Computer Input When Digital zoom + is selected, the On-Screen Menu disappears and “D. zoom +” is displayed. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.[...]

35 Press the INPUT button on the top control or VIDEO button on the remote control to select “Video.” Before using INPUT or VIDEO buttons, select the correct input source through menu operation as described below. Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input Menu icon.[...]

36 Video Input Press the INPUT button on the top control or COMPUTER on the remote control to select Computer 1. Before using INPUT or COMPUTER buttons, select the correct input source through Menu operation as described below. Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input [...]

37 Video Input Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 1 Vi deo S yst em Selection AV System Menu (Video or S-Video) AV System Menu (Component) Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button[...]

38 Video Input Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired level and then press the SELECT button. Move the red frame pointer to the desired image level and press the SELECT button[...]

39 Video Input Use the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. The level of each item is displayed[...]

40 Video Input To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select “Yes.” Stored data can be called up by selecting “Image” in the Image Level Selection on page 38. Image Level Menu Move the re[...]

41 Video Input This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons and move the red frame pointer to the desired function and then press the [...]

42 Display Blue back Press the Point 7 8 buttons to switch on/off. When this function is “On,” a blue image is displayed while the input signal is not detected. Keystone Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-[...]

43 Setting Capture This function enables you to capture the image being projected and use it for a start-up display or interval of presentations. After capturing the projected image, go to the Logo select function and set it to “User.” Then the captured image is displayed when turning on the projector next time or pressing the NO SHOW button (p[...]

44 Logo PIN code lock Dialog Box Quit Pointer Enter a Log o PIN code Use the Point 7 8 buttons to select a number and press the SELECT button to fix the number; the number changes to “ ✳ .” If you fixed an incorrect number, move the pointer to “Set” or “Clear” once by pressing the Point d button, then return to “Logo PIN code.” En[...]

45 Setting Ceiling Rear Ceiling When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.[...]

46 Setting On start When this function is set to “On,” the projector is automatically turned on just by connecting the AC power cord to an outlet. ✔ Note: • Be sure to turn the projector off properly (see “Turning Off the Projector” on page 20). If the projector is turned off in the incorrect sequence, the On start function does not ope[...]

47 Setting Security (Key lock, PIN code lock, and Alarm settings) This function allows you to use Key lock, PIN code lock, and Alarm functions to set the security for the projector operation. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off ..[...]

48 Setting The PIN code can be changed to your desired four-digit number. Select “PIN code change” with the Point d button, and press the SELECT button to display the New PIN code input dialog box. Select a number with the Point 7 8 buttons and fix the number with the SELECT button. Repeat it to complete entering a four-digit number. When the f[...]

49 This function is used to reset the lamp replacement counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 57 for operation. Lamp counter Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock and the lamp counter to the factor[...]

50 Ho w t o Use the Antithef t Alar m F unction Antitheft Alarm Function The Antitheft alarm function is provided to prevent the projector from being stolen. When this function is set to “On,” the alarm rings as an unauthorized person tries to move the projector. Press the F button twice to turn the alarm function on. The ALARM indicator blinks[...]

51 Antitheft Alarm Function CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM FUNCTION CAN NO LONGER BE CHANGED. Chang e the PIN code Press the F button and enter the four-digit PIN code number within about 10 seconds. The ALARM indicator [...]

52 Antitheft Alarm Function How t o install the batt ery To use the Antitheft alarm function, you need to install a battery into the projector. (Use a SANYO Electric Co., Ltd. CR2 3V lithium battery.) Unplug the AC power cord from a wall outlet before installing the battery. Remove the screw and open the battery cover on the bottom of the projector[...]

53 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. Top Control Wa r n i ng Indicat or The pr oject or is shut do wn and the W ARNING indicator is blinking r ed. When the temperature inside the projector reaches a certain [...]

54 Maintenance and Cleaning Turn off the projector, and unplug the AC power cord from the AC outlet. Turn over the projector and remove the air filters by pulling the latches upward. 1 2 Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters become clogged with dust particles, [...]

55 Maintenance and Cleaning Cleaning the Pr ojector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When it is heavily soiled, use a small amount of mild detergent and finish with the cleaning cloth. Avoid excessive use of cleaner. Abrasive cleaners, solvents, or other harsh chemicals[...]

56 Maintenance and Cleaning Follow these steps to replace the lamp. Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of y our project or : PLC-XL40 ● Replacement Lamp T ype No. : PO A -LMP90 (Service Parts No. 610 323 0726)[...]

57 Maintenance and Cleaning Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. Turn the projector on and press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. [...]

58 Tr oubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages16–18. – Make sure all equipment is connected to an AC outlet and the power is turned on. – When you operate the projector with [...]

59 Appendix The CE Mark is a Directive conformity mark of the European Community (EC). Some displays are not seen – Check the Display function (see page 42). during the operation. PIN code dialog box appears – PIN code lock is being set. Enter a PIN code; the “1234” or numbers at start-up. you have set (see pages 19, 47–48). Computer 2 ca[...]

60 Appendix Menu T r ee Mode 1 Mode 2 SVGA 1 - - - - Computer Input ✽ Systems displayed in the System Menu vary depending on an input signal. Computer Input/V ideo Input Sound Volume Mute Quit On / Off Sound 0 - 63 Input Computer 2 Video Auto Go to System (3) Go to System (3) Video Go to System (3) ✽ N/A - - - not applicable Go to System (1) Go[...]

61 Appendix Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Dynamic Cinema Blackboard (Green) Image 1 Image 2 Image 3 Set ting Image Select System (2) System (3) Image 4 Language Setting English German French Italian Spanish Portuguese Dutch Swedish Chinese Korean Japanese On / Off On / Countdown off[...]

62 Appendix Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. *When the projection lamp reaches the end of its life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement cou[...]

63 Appendix Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 3[...]

64 Appendix Te c hnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 10.50” x 4.86” x 9.58” (320 mm x 148 mm x 292 mm) (Not including adjustable feet) Net Weight 7.3 lbs (3.3 kg) Feet Adjustment 0˚ to 10.0˚ Panel Resolution LCD Panel System 0.6” TFT Active Matrix type, 3 panels Panel Re[...]

65 Appendix Model No. COMPONENT-VGA Cable : POA-CA-COMPVGA SCART-VGA Cable : POA-CA-SCART Mini D-sub Extension Cable : KA-MC-DB10 Presentation Remote Control : POA-RCKIT-03 Presentation Remote Control : POA-RCKIT-04 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. O[...]

66 Appendix Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 SERVICE PORT CONNECTOR Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) 2 34 1 R X D ----- ----- GND RTS / CTS GND GND Serial 1 2 3 4 5 6 7 8 COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Con[...]

67 Appendix PIN Code Label Put on the label below (supplied) to a prominent place of the projector’s body while it is locked with a PIN code. While the projector is locked with the PIN code... Put on the label below (supplied) to a prominent place of the projector’s body while the Antitheft alarm function is set. While the Antitheft alarm funct[...]

SANYO Electric Co., Ltd.[...]