Polk Audio C300.2 инструкция обслуживания

OWNER’S MANUAL C300.2 Carbon Series 2/1 Channel Amplifier C300.2 Carbon Series Amplificateur 2/1 canaux[...]

2 Polk Audio—A Passion for Sound Welcome to the Polk Audio family! For over thirty years, George Klopfer and I, and all the people at Polk Audio, have been designing and building sound equip- ment for people like you: the person who demands high quality and outstanding performance at a reason- able price. (Someone just like US, in other words!) P[...]

3 Getting Started Please inspect your new amplifier(s) carefully. Notify your Polk Audio dealer if you notice any damage or missing items. Keep the carton and packing material; this will do the best job of protecting your equipment if it must be transported. PARTS INCLUDED 2 Hex wrenches Screws (2 long, 2 short) Extra washers Fuse replacements Mois[...]

4 All Carbon Series Amplifier Models Feature: • Polk’s Maximum Dynamic Headroom (MDH) Power Supply allows Polk/MOMO Amplifiers to deliver more instanta- neous power peaks, easily driving your speakers during musical peaks. Get “max headroom” (!) and more power for low impedance loads. • Each model features fully adjustable electronic cros[...]

5 Read This First Installing a car audio system is a serious project. If you have any doubts about your ability to execute any of the installation steps found in this manual, save yourself a lot of grief and contact a professional installer. Your Polk Audio dealer is a good place to find one. If you intend to do the installation yourself we assume [...]

6 Notes About Electrical Installation • ALWAYS DISCONNECT YOUR VEHICLE’S BATTERY GROUND BEFORE WORKING WITH YOUR VEHICLE’S ELEC- TRICAL SYSTEM. • This amplifier is designed for use in vehicles with 12-volt, negative-ground electrical systems. Use of this product in vehicles with positive-ground, or with voltages other than 12 volts, may res[...]

7 Installing Y our New Polk Audio Amplifier Before installing your new amplifier, carefully choose the location for the installation. The amplifier should have at least 2" (5cm) of ventilation space on all sides to allow heat to rise and dissipate away from the amplifier. Be sure that the power and signal cable connections can enter and leave [...]

8 T ypical Installation ALWAYS DISCONNECT YOUR VEHICLE’S BATTERY GROUND BEFORE WORKING WITH YOUR VEHICLE’S ELECTRICAL SYSTEM. ALWAYS BE AWARE OF THE LOCATION OF HIDDEN WIRES, CABLES AND FLUID LINES BEFORE DRILLING HOLES OR MAKING CONNECTIONS. 1. DISCONNECT the negative battery post connection and secure the disconnected cable away from the batt[...]

9 T ypical Installation, continued For the ground connection, also use the largest gauge cable available. Connect to the terminal marked GND and then connect this cable directly to your car’s chassis. Keep the length of the GND connection as short as possible, ideally under 6", to avoid ground loops and engine noise hum prob - lems. Make cer[...]

10 L R R Wire Routing Options Options pour le passage des fils For Flush Mount installations (where amp sits directly on solid surface), route wiring through side vents of end caps BEFORE wiring into the amp. Pour montage en surface (lorsque l’ampli repose sur une surface solide) passez les fils à travers les évents latéraux de l’amplificate[...]

11 L R L R SIDE VIEW TOP VIEW R L R L 2 CHANN EL AM P AD JU ST MEN T CO NTRO LS SPEA KER OU TP UT TE RM I NAL S RCA INPU T JAC KS FU SES REMOTE TRUN-ON LEAD RCA PRE- OUT JAC KS GROUND LEAD BATTERY LEAD 120 150 Complete Amp Panel Layout Schéma complet du panneau de l’amplificateur[...]

12 1 REMOTE BASS GAIN MODULE JACK Accepts telephone jack input connection from the remote bass gain module (only works when crossover is set to LP). Set GAIN (6) to max when using the remote. Remote bass gain module is sold separately. See your Authorized Polk AutoSound Dealer or visit the webstore at polkaudio.com. 2 CROSSOVER MODE SELECTOR SWITCH[...]

13 4 COMMUTATEUR « POLK/MOMO PRE-EQ » Le commutateur d’égalisation préréglée (Pre-EQ) maximise la performance de la chaîne lorsqu’un subwoofer Polk/MOMO est utilisé avec le sélecteur du « mode de séparation » en position « LP » ou qu’un haut-parleur Polk/MOMO à gamme intégrale est utilisé avec le sélecteur du « mode de sép[...]

14 LR FUSE BA TT E RY Remote turn on from source unit Pre-EQ "ON" 4 2 3 Settings Output from headunit Coax Driver Coax Driver DIST . BLOCK Connect to nearest chassis ground 2-Channel Coax Hook-Up Connexion de h.p. coaxiaux pour deux canaux LR 120 150 1 26 5 4 3[...]

15 L R FUSE BA TT E RY Remote turn on from source unit Woofer Tw eeter Crossover Woofer Tw eeter Crossover Output from headunit Pre-EQ "ON" 4 2 3 Settings DIST . BLOCK Connect to nearest chassis ground 2-Channel Component System Connexion de composants pour deux canaux LR FUSE BA TT E RY Remote turn on from source unit 4 Settings Output f[...]

16 L R Output from headunit FUSE BA TT E RY Remote turn on from source unit Subwoofer Pre-EQ "ON" 4 2 3 Settings DIST . BLOCK Connect to nearest chassis ground Subwoofer impedance should be 4 Ω or greater . Bridged Subwoofer Subwoofer connecté en pont (BRIDGED)[...]

17 Sketch Y our Custom Install Configuration for Future Reference Here: Pour référence future, faites un croquis de votre installation personnalisée ici:[...]

18 Power Connection Details Before installing your amplifier, disconnect the negative (ground) wire from the vehicle’s battery and secure it away from the battery. This will prevent accidental damage to the system. And to yourself as well. This amplifier’s “+12 VDC” and “GROUND” (chassis ground) connections are designed to accept 4 AWG [...]

19 Protect Your Hearing! Now that you’ve got Polk Audio equipment in your car you’re a valued member of the Polk Audio family. We want you, and your hearing, to be around for a long, long time. We urge you to practice restraint in the operation of this product so as not to damage your hearing (and that of other people in your car, or in your ne[...]

20 C300.2 Specifications Power Output: RMS Continuous Power (at 14.4V at the input terminals, 20Hz - 20kHz) Per Channel into 4 Ohms (0.1% THD+N) 150W Per Channel into 2 Ohms (1% THD+N) 220W Bridged into 4 Ohms (1% THD+N) 550W Total Dynamic Power 850W Frequency Response (-3dB Points) <15Hz to 45kHz Signal-to-Noise (Referenced to rated power) >[...]

21 Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party. Polk Audio, Inc., warrants, to the original retail purchaser only, that the LOUDSPEAKER(S), PASSIVE CROSSOVER COM - PONENT([...]

22 La garantie de Polk Audio, Inc. n’est valide que pour l'a- cheteur au détail original. La garantie sera automatiquement annulée avant sa date d’expiration spécifiée si l'acheteur original vend ou transfère le produit à tout autre parti. Polk Audio Inc. garantit - à l'acheteur au détail original seule - ment - que le ou[...]

23[...]

www.polkaudio.com www.polkmomo.com Contact Polk Audio Customer Service 800-377-7655 (M-F, 9-6 EST, US only) or via email polkcs@polkaudio.com. Outside the US, call 410-358-3600. Communiquez avec le Service à la Clientèle de Polk Audio au 410-358-3600 (au Canada et aux É.-U. seulement, du lundi au vendredi, de 9h00 à 18h00, HE - à l’extérieu[...]