Panasonic AJ-HD1700 инструкция обслуживания

Panasonic Broadcast AJ-HD1700 Menu Information[...]

LOCAL HD HD AJ-HD1700 External encoder remote controller SD BOTH SD BOTH BOTH HD External encoder remote controller/AJ-HD1700 SD BOTH Setting Adjustment item 05: ENCODER SEL 06: V LEVEL CTRL 662: V LEVEL 663: C LEVEL 664: HUE ( or C PHASE) 665: SETUP LVL (or BK LVL) REMOTE 78 System menus No./Item Description of setting The underlining (__) denotes[...]

00 COARSE For adjusting the VIDEO OUT system phase in 1H steps. j : To advance the phase. i : To delay the phase. 0000 j 5H :: 0005 0H :: 0010 5H <Note> This setting remains unchanged even when the factory setting operation is performed. No./Item Description of setting 12 SYS H (HD)* UP For adjusting the system phase of the HD SDI output. Whe[...]

59/60 Hz mode: Status in which “0” (59/60) has been selected 50 Hz mode: Status in which “1” (50) has been selected 23/24 Hz mode: Status in which “2” (23/24) has been selected 25 Hz (HD) mode: Status in which “3” (25 (HD)) has been selected 25 Hz (SD) mode: Status in which “4” (25(SD)) has been selected 80 System menus *System [...]

81 Setup menus The underlining (__) denotes the factory setting mode. <BASIC> No./Item Description of setting 000 P-ROLL TIME For setting the preroll time. Any time from 0 to 30 seconds can be set in 1- second increments. 0000 0s :: 0005 5s :: 0030 30s <Notes> • During automatic editing (PREVIEW or AUTO EDIT), no operations are perfor[...]

82 Setup menus The underlining (__) denotes the factory setting mode. <BASIC> (continued) No./Item Description of setting No./Item Description of setting 008 CHARA V-POS For setting the vertical positions of the characters for the time code and other superimposed displays of the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors. 0000 0[...]

83 The underlining (__) denotes the factory setting mode. Setup menus <BASIC> (continued) Formats in which the tape is played back No./Item Description of setting 031* 4 OUT REF Video output reference 0000 AUTO : When the HD REF input signal is supplied, it is used as the reference. If it is not supplied but the SD REF input signal is supplie[...]

84 Setup menus The underlining (__) denotes the factory setting mode. <OPERA TION> No./Item Description of setting 100 SEARCH ENA For selecting the direct search dial operation. 0000 DIAL : Direct search dial operations are performed. 0001 KEY : Operation does not transfer to the search mode unless the SHTL, JOG or VAR button is pressed. 101 [...]

85 Setup menus The underlining (__) denotes the factory setting mode. <OPERA TION> (continued) 113* 1 REC INH For selecting whether to allow or inhibit recording on the cassette tape. 0000 OFF : Recording on the cassette tape is enabled when the cassette’s accidental erasure prevention mechanism has been set to the recording enable position[...]

86 Setup menus The underlining (__) denotes the factory setting mode. <OPERA TION> (continued) No./Item Description of setting 118* 1 SP MODE INH For selecting whether to allow or inhibit recording on a tape which has been written by a format other than DVCPRO HD-LP. 0000 OFF : Recording on the cassette tape is allowed. 0001 ON : Recording on[...]

204 RS232C SEL For selecting whether the RS-232C connector is to function. 0000 OFF : The RS-232C connector does not function. 0001 ON : The RS-232C connector functions. 87 Setup menus The underlining (__) denotes the factory setting mode. <INTERF ACE> No./Item Description of setting 200 PARA RUN For selecting whether to operate two or more V[...]

88 Setup menus The underlining (__) denotes the factory setting mode. <EDIT> No./Item Description of setting 300 IN/OUT DEL For selecting the operation to be performed when an edit point has been set incorrectly (when the OUT point comes before the IN point). 0000 MANU : Editing is not performed unless the illegal edit point is cleared or set[...]

89 Setup menus The underlining (__) denotes the factory setting mode. <EDIT> (continued) No./Item Description of setting No./Item Description of setting 324* 1 EDIT RPLCEC As with setup menu item No.320, the VTR’s CUE edit presets are set to ON or OFF following the analog audio signals specified by the editor or controller. 0000 N-DEF : Not[...]

90 Setup menus The underlining (__) denotes the factory setting mode. <Precaution for STILL TIMER item setting> The cumulative total standby time passed in the same location increases at such times when the same material is repeatedly used as is the case when programs are transmitted, for example. <T APE PROTECT> No./Item Description of[...]

91 Setup menus The underlining (__) denotes the factory setting mode. <TIME CODE> No./Item Description of setting 500* 4 VITC BLANK For selecting whether or not to output the VITC signal at the positions selected by setup menu items No.501 (VITC POS-1) and No.502 (VITC POS-2). 0000 BLANK : The VITC signal is not output. 0001 THRU : The VITC s[...]

92 513 VITC OUT For selecting how to output the VITC which is superimposed on the output video signal. 0000 SBC : In the playback mode, the time code recorded in the SBC area is output. 0001 VAUX : In the playback mode, the time code recorded in the VAUX area is output. <Note> The VITC information detected by the HD serial input is automatica[...]

For accentuating the horizontal contours during down-conversion and line conversion (1080i <> 720p). 0000 0dB 0001 i 0.7dB 0002 i 1dB 0003 i 1. 2dB 0004 i 1.5dB 0005 i 2dB 93 Setup menus The underlining (__) denotes the factory setting mode. <VIDEO> No./Item Description of setting No./Item Description of setting 601* 1 VIDEO INT SG For [...]

94 Setup menus The underlining (__) denotes the factory setting mode. <VIDEO> (continued) No./Item Description of setting No./Item Description of setting 627 D/C ENH V For accentuating the vertical contours during down-conversion and line conversion (1080i <> 720p). 0000 0dB 0001 i 0.7dB 0002 i 1dB 0003 i 1.2dB 0004 i 1.5dB 0005 i 2dB 6[...]

95 Setup menus <Note> Setup menu items No.638, 639, 640, 641 and 642 do not function when the AJ-UC1700G optional board has not been installed. The underlining (__) denotes the factory setting mode. *UP: With HD output (HD tape playback or up-converted output) *DW: With SD output (SD tape playback or down-converted output) <VIDEO> (cont[...]

96 Setup menus The underlining (__) denotes the factory setting mode. *DW: With SD output (SD tape playback or down-converted output) <VIDEO> (continued) No./Item Description of setting No./Item Description of setting 663 C LEVEL For adjusting the chroma level of the HD SDI output, SD SDI output and VIDEO output. ( j¶ to 0 dB to i 3 dB) 0000[...]

97 The underlining (__) denotes the factory setting mode. *UP: With HD output (HD tape playback or up-converted output) *DW: With SD output (SD tape playback or down-converted output) No./Item Description of setting Setup menus <VIDEO> (continued) No./Item Description of setting 680* 2 CC (F1) BLANK* DW For selecting ON or OFF for the closed [...]

98 Setup menus The underlining (__) denotes the factory setting mode. <AUDIO> No./Item Description of setting No./Item Description of setting 700* 1 CH1 IN LV For selecting the audio input (CH1) reference level. 0000 4dB 0001 0dB 0002 j 20dB 701* 1 CH2 IN LV For selecting the audio input (CH2) reference level. 0000 4dB 0001 0dB 0002 j 20dB 70[...]

99 717* 1 CH5 IN SEL For selecting the CH5 input signal. 0000 INT SG : The internal signal is selected. 0001 DIGI : Digital input signals are selected. 0002 ANA : Analog input signals are selected. (CH1 input) <Note> When DIGI has been selected, whether serial or AES is selected for the input is determined by the setting selected for setup me[...]

100 733* 1 REC CUE For selecting the input signals to be recorded on the CUE track. 0000 CUE : CUE IN 0001 CH1 : Audio input CH1 signals 0002 CH2 : Audio input CH2 signals 0003 CH3 : Audio input CH3 signals 0004 CH4 : Audio input CH4 signals 0005 CH5 : Audio input CH5 signals 0006 CH6 : Audio input CH6 signals 0007 CH7 : Audio input CH7 signals 000[...]

101 Setup menus The underlining (__) denotes the factory setting mode. <AUDIO> (continued) No./Item Description of setting No./Item Description of setting 739 CH2 CUE SEL For selecting the CH2 output status of the main signal line in the search mode. 0000 OFF : The CUE signal is not output. 0001 ON : The CUE signal is output. <Note> For[...]

102 749* 1 AUDIO PB VR For selecting whether the playback level adjustment controls are to function in the EE mode when INT SG has been selected on the <AUDIO> function menu. 0000 DIS : The INT SG output level is fixed at the UNITY level. 0001 ENA : The INT SG output level can be varied using the playback level adjustment controls. Setup menu[...]

103 Setup menus <AUDIO> (continued) No./Item Description of setting No./Item Description of setting 763 METER SCALE (This menu is not displayed for AJ-HD1700E.) For selecting the scale display of the audio level meter. 0000 PEAK_0 : [The audio level is displayed with 0 dB as the maximum level. 0001 REF_0 : The audio level is displayed with 0 [...]

104 Setup menus The underlining (__) denotes the factory setting mode. <MENU> No./Item Description of setting A02 P. ON LOAD This VTR is equipped with VTR MEMORY for storing the current settings (* 1 ) and VTR MEMORY to for backing up VTR MEMORY . The data of a selected VTR MEMORY to can be loaded into VTR MEMORY and operation started on the [...]

105 Setup menus Follow the steps below to switch the system frequency (59/60 Hz, 50 Hz, 23/24 Hz, 25 Hz (HD) or 25 Hz(SD)). <How to switch the system frequency> 1 Following the procedure for the <SETUP MENU/SYSTEM MENU> (page 60) to change the system menu item No.25 (SYSTEM FREQ) setting. 2 Press (SET) to enter the setting, and after th[...]

2F 106 2F 2F Setup menus <Menu management accompanying switching the system frequency> The system menu and setup menu have some items whose settings differ and other items with which no selection options are displayed and whose settings are fixed (indicated by the shading in the table below), depending on the switching of the operation mode i[...]

60/24 107 Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 50 25 (HD) d 12h 24h Same as for 59/60 002 TAPE TIMER OFF ON 004 SYNCHRONIZE MANU AUTO 010 MONI CONTROL 0s to 3s to 5s 012 REC ADJUST OFF ON 013 DET STOP AUTO INPUT HD_REF SD_REF HD_REF Same as for 59/60 Same as for 59/60 031 OUT REF S/F/R STOP 105 AUTO EE SEL NORMAL TH[...]

OFF OFF Same as for 59/60 PRE PRE 50 Same as for 59/60 108 BLANK THRU BLANK BLANK 500 VITC BLANK Setup menus Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 25 (HD) 25 (SD) N-DEF CH1 CH2 CH1+3 320 EDIT RPLCE1 321 EDIT RPLCE2 322 EDIT RPLCE3 323 EDIT RPLCE4 Same as for 59/60 324 EDIT RPLCEC REGEN PRE AUTO PRE 503 TCG MODE TC&am[...]

109 Setup menus Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 50 25 (HD) 25 (SD) The underlining (__) denotes the factory setting mode. BLANK 1080i 720p - - - 634 480p # HD OUT 480p 480p 480i 635 480p # SD OUT 1080i 720p - - - 636 480i # HD OUT 480i 480i 480p 637 480i # SD OUT FIT_V FIT_H FIT_HV Same as for 59/60 638 IN U/C [...]

Same as for 59/60 25 (SD) 110 Setup menus No. Menu item System menu No.25 (SYSTEM FREQ) 59/60 23/24 50 25 (HD) Setup menus The underlining (__) denotes the factory setting mode. 719 CH7 IN SEL 720 CH8 IN SEL AES SDI 721 D IN SEL 12 722 D IN SEL 34 723 D IN SEL 56 724 D IN SEL 78 CH1 to CH3 i 4 725 REC CH1 726 REC CH2 727 REC CH3 728 REC CH4 CH5 to [...]