Panasonic AJ-SPD850P инструкция обслуживания

Panasonic Broadcast AJ-SPD850p Menu Information[...]

40 Setup (Initial settings) The memory card recorder ’ s main settings are performed while making selections using a system of menus. If a TV monitor has been connected to the VIDEO OUT 3 connector or SDI OUT 3 connector (optional) on the rear panel and the SUPER switch is set to [ON], the setting menus are displayed on the TV monitor. HEADPHONES[...]

41 Setup menus The memory card recorder can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use. Changing the file (1) Press the MENU button ( 2) Press the FF button while holding down the DIAG (or SHIFT) button to switch to the next user file or press the REW button while holding d[...]

42 Setup menus (contin ued) Loading user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file. (1) Press the MENU button ( 2 ) Press the REW or FF button while holding down the DIAG (or SHIFT) butt[...]

43 Setup menus (contin ued) SYSTEM menu No./Item Description 11 SYS SC COAR. Coarse adjustment of system phase: 90 ° units Note: If setting operation is performed, the setting value does not return to factory (default) setting. 0000 0 0001 90 0002 180 0003 270 12 SYS SC FINE Fine adjustment of system phase: Variable range ±45 ° or more – : Adv[...]

44 USER menu <B ASIC> No./Item Description 000 P-ROLL TIME This sets the preroll time. The preroll time can be set from 0 to 15 seconds in 1-second increments. 0000 0s :: 0005 5s :: 0015 15s 001 LOCAL ENA This selects the buttons which can be operated on the front panel when the REMOTE button is lit. 0000 DIS : No buttons can be operated. 000[...]

45 Setup menus (contin ued) USER menu <B ASIC> The underlined items indicates the initial setting. No./Item Description 008 DISPLAY SEL This selects what information is to be provided by the time code and other superimposed displays output from the VIDEO OUT 3/SDI OUT 3 connector (optional). 0000 TIME : Data only. (The data indicates the valu[...]

46 Setup menus (contin ued) USER menu <B ASIC> The underlined items indicates the initial setting. No./Item Description No./Item Description 012 SYS FORMAT This sets the memory card recorder ’ s recording and playback format. 0000 50M : DVCPRO50 (50 Mbps) is selected. 0001 25M : DVCPRO (25 Mbps) is selected. 0002 DV : DV (25 Mbps) is select[...]

47 Setup menus (contin ued) USER menu <B ASIC> No./Item Description 05 TIME ZONE Sets the time difference from the world standard time. Refer to the table below, and select the setting which corresponds to the local time. 0000 00:00 0001 +00:30 0002 +01:00 :: 0050 – 00:30 No./Item Description 070 TV SYSTEM This selects the TV system. 0000: [...]

48 Setup menus (contin ued) The underlined items indicates the initial setting. No./Item Description 100 SEARCH ENA This selects the direct search dial operation. 0000 DIAL : For direct search dial operations. 0001 KEY : Operation is not transferred to the search mode unless the search button is pressed. 101 SHTL MAX This sets the maximum speed for[...]

49 Setup menus (contin ued) No./Item Description USER menu <OPERA TION> 113 A IN SEL INH This selects whether audio input switching using the INPUT SELECT button is to be enabled or disabled. 0000 OFF : Audio input switching using the INPUT SELECT button is enabled. 0001 ON : Audio input switching using the INPUT SELECT button is disabled. 00[...]

50 Setup menus (contin ued) The underlined items indicates the initial setting. No./Item Description USER menu <INTERF ACE> 201 9P SEL This selects whether the REMOTE (9P) connector functions when the REMOTE button is lit. 0000 OFF : Connector does not function. 0001 ON : Connector functions. 204 RS232C SEL This selects whether the RS-232C co[...]

51 Setup menus (contin ued) No./Item Description USER menu <EDIT> 303 STD/NON-STD This selects STD or NON-STD in accordance with the composite input signal. 0000 AUTO : Standard/non-standard signals are automatically identified and processed. 0001 STD : Standard signals are processed. (Forced STD) 0002 N-STD : Non-standard signals are process[...]

52 Setup menus (contin ued) No./Item Description USER menu <TIME CODE> 500 VITC BLANK This selects whether to output the VITC signal at the positions selected by setup menu items No. 501 (VITC POS-1) and No. 502 (VITC POS-2). 0000 BLANK : VITC signals are not output. 0001 THRU : VITC signals are output. 501 VITC POS-1 This sets the position w[...]

53 Setup menus (contin ued) No./Item Description USER menu <TIME CODE> USER menu <VIDEO> 510 TC OUT REF This is used to switch the phase of the time code, which is output from the TIME CODE OUT connector, for the external LTC input when the TCG switch is at the “ EXT ” position. 0000 V OUT : Time code is synchronized with output vid[...]

54 No./Item Description 620 ESR MODE This selects the operation mode for edge subcarrier reduction (ESR) in the playback circuit. 0000 OFF : The mode is forcibly set to OFF. 0001 AUTO : The mode is automatically set to ON or OFF depending on the memory card recorder operation. 621 CCR MODE This selects the cross color processing during playback. 00[...]

55 Setup menus (contin ued) The underlined items indicates the initial setting. USER menu <VIDEO> No./Item Description 622 SETUP 25 (For AJ-SPD850P) Sub-screen For setting 7.5% setup processing to be performed on input and output signals in the DVCPRO (25 Mbps) mode. When the STOP button is pressed, operation is transferred to the sub- screen[...]

56 Setup menus (contin ued) USER menu <VIDEO> No./Item Description 660 UMID REC This selects whether or not to record the UMID information on the card. 0000 OFF : UMID information is not recorded on the card. In addition, EE output signals are blanked. 0001 ON : UMID information is recorded on the card. Note: If THRU has been selected as the [...]

57 No./Item Description 727 PB FADE This selects the processing method for the audio edit points (IN point, OUT point) during playback etc. 0000 AUTO : The processing method accords with the status established during recording. 0001 CUT : Forced CUT 0002 FADE : Forced FADE 728 EMBEDDED AUD This selects whether to superimpose the audio data onto the[...]

58 Setup menus (contin ued) No./Item Description USER menu <V BLANK> 800 ADD LINE 25 Sub-screen 00 REC LINE1 This selects the additional line where the signals are to be recorded. [625i system] 0000 7L :: 0002 9L :: 0015 22L 0016 320L :: 0031 335L 0032 623L [525i system] 0000 10L :: 0002 12L :: 0012 22L 0013 263L 0014 273L :: 0025 284L 0026 5[...]

59 No./Item Description Setup menus (contin ued) No./Item Description USER menu <V BLANK> 02 REC LINE3 03 REC LINE4 This selects the additional line where the signals are to be recorded. Note: This menu option is not displayed when setting “ 1 ” has been selected as the additional line mode. [625i system] 0000 7L :: 0015 22L :: 0019 323L [...]

60 USER menu <V BLANK> The underlined items indicates the initial setting. No./Item Description 803 TELETEXT DET [525i system] 00 REC LINE1 : 12 REC LINE13 [625i system] 00 REC LINE1 : 14 REC LINE15 This selects the lines in which the teletext signals are to be recorded. [625i system] 0000 OFF 0001 7&320 0002 8&321 0003 9&322 0004[...]

61 Setup menus (contin ued) Number of lines which can be set for TELETEXT • When 25 Mbps is the recording/playback format. No. 800: ADD LINE 25 setting value Number of lines which can be set [525i system] [625i system] 660: UMID REC setting value 660: UMID REC setting value OFF ON OFF ON OFF YC422 YC411 Y1_B/W Y1_BPF C1 Y2_B/W Y2_BPF C2 13 5 8 13[...]

62 Setup menus (contin ued) No./Item Description USER menu <MENU> A00 LOAD This selects the user file whose contents will be loaded into USER1. 0000 USER2 : The USER2 file contents are loaded. 0001 USER3 : The USER3 file contents are loaded. 0002 USER4 : The USER4 file contents are loaded. 0003 USER5 : The USER5 file contents are loaded. Note[...]