Nokia Mediamaster 9828 инструкция обслуживания

Owner’ s Manual[...]

[...]

GB 3 MEDIAMASTER 9828 T Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein are trademarks or trade names of their owners. Nokia operates a policy of continuous development. Therefore we reserve the right to make changes and improvements to any of the products described [...]

GB 4 GENERAL OPERA TION OF THE MEDIAMASTER Throughout this manual you will notice that the everyday op- eration of your Mediamaster is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your Mediamaster , guiding you through installation, channel selection, viewing and many other functions. [...]

GB 5 Switch the Mediamaster in and out of standby mode. EXIT TV T o return to the viewing mode from a menu without stor - ing settings (in menu mode.) Switch between TV or Radio mode (in viewing mode.) T urn the sound off/on (mute.) - + Adjust the volume. The Mediamaster’ s maximum level is controlled by the TV’ s present volume setting. 0 - 9 [...]

GB 6 Rear Panel AUDIO L R phono connectors Stereo outputs for connection to a HiFi system TV SCART for connection to the TV AUX SCART for connection to a VCR, or an analogue satellite receiver DIGIT AL AUDIO phono connector S/PDIF output for con- nection to a HiFi sys- tem Mains lead 95 - 250 V AC 50-60 Hz SERIAL PORT to read and load data informat[...]

GB 7 Inserting the CA module and the smartcard Insert the CA module and the smartcard according to the instruc- tions provided with the module. ABOUT THE SMAR TCARD AND CA MODULE General T o be able to receive terrestrial scrambled digital channels you will need a CA module and a Smartcard from a Service Provider . There are a few different CA modu[...]

GB 8 The box for your Mediamaster should contain the following items: • the Mediamaster • remote control with 2 AAA batteries • SCART lead (fully featur ed 1,0 metre) • aerial/RF lead (double screened 1,5 metres) • Owner’ s Manual • Software License agreement • mains lead CONNECTION OF THE MEDIAMASTER About the SCART sockets • The[...]

GB 9 Connecting to the TV aerial Y ou can connect the Mediamaster to the following type of aerials: 1. Standard outdoor aerial Where possible, use an outdoor roof aerial intended for receiv- ing UHF channels between 21 and 69. Please note the following: • In some block of flats, the roof-mounted aerial system includes a filter and channel selecto[...]

GB 10 • Connect a SCART lead between the main SCAR T socket on the TV and the TV SCART socket on the Mediamaster . • Connect a SCART lead between the VCR and the AUX SCAR T socket on the Mediamaster . • Connect a SCART lead between the VCR and the second SCART socket on the TV . • Connect an RF lead from the TV/VCR output on the Media- mast[...]

GB 11 Connecting an Satellite Receiver and a VCR Connecting a HiFi system • Connect an RCA/Cinch stereo cable from the AUDIO L R sock- ets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system. • If available you can connect an RCA/Cinch single cable from the DIGIT AL AUDIO socket on the Mediamaster to your HiFi[...]

GB 12 This procedure is necessary only if your Mediamaster is con- nected to the TV with an RF lead and no SCAR T leads are used. T o tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use SCAR T leads in your con- nection. • Plug in your Media[...]

GB 13 Language Select the desired menu language. This will also be the main language for audio and subtitling. General Information Once you have correctly connected the Mediamaster , you also have to perform a “ First T ime Installation. ” During this procedure, helpful information is displayed at the bot- tom of the menus. Please note! The OK [...]

GB 14 FIRST TIME INST ALLA TION Channel Search The Channel Search procedure can be performed in two differ - ent ways: Automatic Search or Manual Search . Manual Search * When you perform a Manual search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available from your Serv[...]

GB 15 FIRST TIME INST ALLA TION Finishing the first time installation The channels found at the search procedure will now be saved. A message telling that the installation procedure is completed will be shown on the screen. Press OK in order to start watching channels from the box. Channel Search Progress This menu will be shown as long as the Medi[...]

GB 16 VIEWING MODE General Information The following describes the basic functions of your Mediamaster while watching terrestrial digital TV . Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information. Please note , that during the Channel Search pro[...]

GB 17 VIEWING MODE Information. The “i” Button The Mediamaster has the ability to display information about pro- grammes currently being broadcast as well as those being broad- cast next. By pressing the “ i ” button while watching TV you will get a spe- cial Programme Information Banner . Select channel with or the numeric buttons. The “[...]

GB 18 List of Channels At the channel search procedure, 2 Channel lists named “ TV channels ” and “ Radio channels ” are created. A Radio list will only be created and highlighted when radio channels were available to download. In the Channel lists scrambled channels are marked with a pic- ture of a Smartcard (if this information is transmi[...]

GB 19 VIEWING MODE TV Release (0) With the 0 button you can toggle between: digital terrestrial TV analogue terrestrial TV video (the video must be switched on) (This is only valid if the units are connected via SCAR T cables, and not by a RF connection.) Video Recor ding Please note, that during the recording of a programme, every- thing shown on [...]

GB 20 MAIN MENU General Information Many of the functions of the Mediamaster are available from the Main Menu. • Press MENU to open it. TV and Radio Channels Please refer to “ List of channels ” on page 18. Edit Channels From these menus you can create and edit channel lists. Y ou can, among other things, create favourite lists; add, delete, [...]

GB 21 Create list Create your own favourite lists, containing the channels you watch most frequently . Y ou can give each list a specific name, e.g. “ Sport ” or “ Films. ” Rename list From here you can give an existing list a new name. Use the ar - row buttons the same way as when you created the list. Delete list If you want to delete a F[...]

GB 22 Select Channels From this menu you add and remove the channels in your Favour - ite Lists. Y ou use the “ All TV ” list as base to select the channels from. A channel is added or removed by pressing the OK button. The square to the right on a line will be empty for removed channels, and will contain an “ x ” for added channels. • If[...]

GB 23 Rearrange Channels From here you can arrange the sequence for the channels within your favourite lists. • With , mark the channel you want to move to a new posi- tion within the list. • Press again and the right side of the marked channel will change to . • Move the channel to the desired position with and press OK . It is also possible[...]

GB 24 MAIN MENU System Configuration Y ou will be asked to enter your access code before you can open this menu. The code is preset to 1234 from the factory . (The code can be changed from the Parental Control menu. Re- fer to page 26.) If you want to customize the system to suit you better , you can specify some settings from the submenus in the ?[...]

GB 25 MAIN MENU TV Settings From here you can adjust settings concerning your TV . TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens. Select 16:9 for a wide screen TV . TV signal If the teletext function does not work when watching channels from an analogue satellite receiver connected to the M[...]

GB 26 MAIN MENU Receiver Upgrade For future update, if any , of the box, it will be possible to download new versions of the system software. Enter this menu to check for new software. If new software is available you will get information in the menu on how to proceed. NEVER turn off the Mediamaster , never use the remote con- trol or disconnect th[...]

GB 27 MAIN MENU Appearance Preferences Banner time-out When you switch channels, an information banner will be shown for a few seconds. Y ou can select for how long the banner will be shown. V olume bar Select whether or not you want the volume bar to appear on the screen when you change the volume. V olume bar time-out Select how long the banner w[...]

GB 28 MAIN MENU System Information If you have to contact your service provider or a service center , they might ask for information available from this menu. There- fore, it is important that you first check the information in the following menus. Diagnostics T o find out the condition of certain parts of the Mediamaster , you can run a diagnostic[...]

GB 29 GLOSSARY OF TERMS Access Authorisation to use the coding system to purchase / order TV programmes. Audio system With digital reception, the sound is transmitted in pack- ages and is selected either in a special audio mode or pre- selected by using the installation set-up. This makes it possible to select between several different languages in[...]

GB 30 PROBLEM SOL VING Problem The display on the front panel does not light up/is not lit. No sound or picture, but the front panel shows the time or - - : - -. Bad picture/blocking error . The front panel shows a channel number , but you can ’ t see anything from digital TV . When the Mediamaster tries to find and store channels during the firs[...]

GB 31 PROBLEM SOL VING FRONT P ANEL DISPLA Y Channel number in TV mode. The Mediamaster is in standby mode, and current time is shown. In TV mode. RF channel in tuning mode. Lights when no signal is being received. Flashes when pressing a button on the remote control. When power -up, boot version, product family and system soft- ware version is sho[...]

GB 32 TECHNICAL SPECIFICA TIONS T ransmission Standards DVB, MPEG 2, OFDM RF input Modulator output In-/output connector IEC female / IEC male RF input frequency 470 to 862 MHz RF input power level -78 to -30 dBm RF impedance 75 Ω Frequency range Loop through 47-862MHz Frequency range R F modulator 470-862 MHz Output channel UHF CH 21-69 Preset c[...]

[...]

66 76989-10 © 0142 Nokia is a registered trademark of Nokia Corporation www .nokia.com[...]