Nokia 9820 T инструкция обслуживания

S 1 Bruksanvisning Owner’ s Manual MEDIAMASTER 9820 T[...]

GB 3 MEDIAMASTER 9820 T Contents GENERAL OPERA TION OF THE MEDIAMASTER 4 FOR YOUR SAFETY 4 REMOTE CONTROL 5 Rear Panel 6 Front Panel 6 ABOUT THE SMAR TCARD 7 Subscription TV Services with a Smartcard (Viaccess) 7 I NST ALLA TION OF THE MEDIAMASTER 8 Preparing the Remote Control 8 Connecting to the TV aerial 8 Connecting the Mediamaster 10 Connectin[...]

GB 4 GENERAL OPERA TION OF THE MEDIAMASTER Throughout this manual you will notice that the everyday opera- tion of your Mediamaster is based on a series of user friendly on- screen displays and menus. These menus will help you get the most from your Mediamaster , guiding you through installation, channel selection, viewing and many other functions.[...]

GB 5 T o switch the Mediamaster in and out of standby mode. EXIT TV T o return to the viewing mode from a menu without stor - ing settings (in menu mode). T o turn the sound off/on (mute). - + T o adjust the volume of digital programmes. The Mediamaster’ s maximum level is controlled by the TV’ s present volume setting. 0 - 9 T o change channel[...]

GB 6 44 10285 230 V ± 15% 50 Hz WARNING! DO NOT OPEN – ELECTRICAL SHOCK HAZARD DIGIT AL AUDIO AUDIO R L TV AERIAL TELEPHONE SERIAL AUX TV TV / VCR AUDIO L R phono connectors Stereo outputs for connection to a HiFi system TV SCART for connec- tion to the TV AUX SCART for connection to a VCR, or an analogue satellite receiver DIGIT AL AUDIO phono [...]

GB 7 Subscription TV Services with a Smartcard (Viaccess) Only for subscription TV services coded with the Viaccess CA system. • Insert your Smartcard fully into the left slot behind the lid of the front panel of the Mediamaster . The gold chip should face downwards and inwards . ABOUT THE SMAR TCARD AND CA MODULE Note! The gold chip must be on t[...]

GB 8 The box for your Mediamaster should contain the following items: • the Mediamaster • a remote control with 2 AAA batteries • a SCART lead (fully featur ed 1,0 metre) • an aerial/RF lead (double screened 1,5 metres) • a telephone modem cable (10 metres with a splitter) • an Owner’ s Manual • a Software License agreement INST ALL[...]

GB 9 • Certain outdoor antennas are pointed at an analogue slave transmitter . The roof antenna should be pointed at a digital TV transmitter . • It is not always advisable to position the antenna as high as possible. If problems arise, experiment with different antenna heights. The same applies to analogue transmissions. 2. Indoor or window-mo[...]

GB 10 Connecting the Mediamaster to the TV • Connect a SCART lead between the main SCAR T socket on the TV and the TV SCART socket on the Mediamaster . • Connect an RF lead from the TV/VCR output on the Mediamaster to the RF input socket on the TV . • Connect the TV aerial to the TV AERIAL input socket on the Mediamaster (or use an indoor aer[...]

GB 11 Connecting an Analogue Satellite Receiver and VCR Connecting a HiFi system • Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system. • If available you can connect an RCA/Cinch single cable from the DIGIT AL AUDIO socket on the Mediamaster to your[...]

GB 12 This procedure is necessary only if your Mediamaster is con- nected to the TV with an RF lead and no SCAR T leads are used T o tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use SCAR T leads in your con- nection. • Plug in your Mediam[...]

GB 13 Language Select the desired menu language. This will also be the main language for audio and subtitling. General Information Once you have correctly connected the Mediamaster , you also have to perform a “First T ime Installation.” During this procedure, helpful information is displayed at the bot- tom of the menus. Please note! The OK bu[...]

GB 14 FIRST TIME INST ALLA TION Channel Search The Channel Search procedure can be performed in two differ - ent ways. • “Automatic Search” or “Manual Search.” Manual Search When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available f[...]

GB 15 VIEWING MODE General Information The following describes the basic functions of your Mediamaster while watching terrestrial digital TV . Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information. Please note , that during the Channel Search pro[...]

GB 16 VIEWING MODE The “i” (Information) Button The Mediamaster has the ability to display information about pro- grammes currently being broadcast as well as those being broad- cast next. By pressing the “ i ” button while watching TV you will get a spe- cial Programme Information Banner . Select channel with or the numeric buttons. The ?[...]

GB 17 List of TV Channels At the channel search procedure, a Channel lists named “Chan- nels” containing all channels are created. In the “Channels” list scrambled channels are marked with a pic- ture of a Smartcard (if this information is transmitted in the sig- nal) and locked channels are marked with a padlock. If you have performed a ne[...]

GB 18 VIEWING MODE TV Release (0) With the 0 button you can toggle between: digital terrestrial TV analogue terrestrial TV video (the video must be on) (This is only valid if the units are connected via SCAR T cables, and not by a RF connection.) Video Recor ding Please note, that during the recording of a programme, every- thing shown on the scree[...]

GB 19 MAIN MENU General Information Many of the functions of the Mediamaster are available from the Main Menu. • Press MENU to open it. Channels Please refer to “List of TV channels” on page 17. Edit Channels From these menus you can create and edit channel lists. Y ou can, among other things, create favourite lists; add, delete, rename and a[...]

GB 20 Create list From here you can create your own favourite lists, containing the channels you watch most frequently . Y ou can give each list a spe- cific name, e.g. “Sport” or “Films.” When a favourite list is selected, you see only those channels defined in the list. When you have given the list a name; press OK and you will en- ter th[...]

GB 21 Select Channels From this menu you add and remove the channels in your Favour - ite Lists. Y ou use the “All TV” list as basis to select the channels from. A channel is added or removed by pressing the OK button. The square to the right on a line will be empty for removed channels, and will contain an “x” for added channels. • If yo[...]

GB 22 Rearrange Channels From here you can arrange the sequence for the channels within your favourite lists. • With , mark the channel you want to move to a new posi- tion within the list. • Press again and the right side of the marked channel will change to . • Move the channel to the desired position with and press OK . It is also possible[...]

GB 23 MAIN MENU System Configuration Y ou will be asked to enter your access code before you can open this menu. The code is preset to 1234 from the factory . (The code can be changed from the Parental Control menu. Re- fer to page 26.) If you want to customize the system to suit you better , you can specify some settings from the submenus in the ?[...]

GB 24 MAIN MENU TV Settings From here you can adjust settings concerning your TV . TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens. Select 16:9 for a wide screen TV . TV signal If the teletext function does not work when watching channels from an analogue satellite receiver connected to the M[...]

GB 25 MAIN MENU Receiver Upgrade In order to keep the Mediamaster up-to-date, it will be possible to download new versions of the system software via satellite and from the Internet. New software may include new or im- proved features for existing menus. Enter this menu to check for new software. If new software is available you will get informatio[...]

GB 26 MAIN MENU Appearance Preferences Banner time-out When you switch channels, an information banner will be shown for a few seconds. Y ou can select for how long the banner will be shown. V olume bar Select whether or not you want the volume bar to appear on the screen when you change the volume. V olume bar time-out Select how long the banner w[...]

GB 27 MAIN MENU System Information If you have to contact your service provider or a service center , they might ask for information available from this menu. There- fore, it is important that you first check the information in the following menus. Diagnostics T o find out the condition of certain parts of the Mediamaster , you can run a diagnostic[...]

GB 28 Conditional Access This menu will only be activated if you have inserted a valid Smartcard/CA module in the slot behind the front lid. If more than one CA system is activated, select the one from which you want information. The V iaccess Conditional Access (CA) System is embedded in the Mediamaster . A Smartcard that supports this standard ca[...]

GB 29 GLOSSARY OF TERMS Access Authorisation to use the coding system to purchase / order TV programmes. Audio system With digital satellite reception, the sound is transmitted in packages and is selected either in a special audio mode or pre-selected by using the installation set-up. This makes it possible to select between several different lan- [...]

GB 30 PROBLEM SOL VING Problem The display on the front panel does not light up/is not lit. No sound or picture, but the front panel shows the time or - - : - -. Bad picture/blocking error . The front panel shows a channel number , but you can’t see anything from digital TV . When the Mediamaster tries to find and store channels during the first [...]

GB 31 PROBLEM SOL VING FRONT P ANEL DISPLA Y Channel number in TV mode. The Mediamaster is in standby mode, and current time is shown. In TV mode. RF channel in tuning mode. Lights when no signal is being re- ceived. Flashes when pressing a button on the remote control. When power -up, boot version, product family and system soft- ware version is s[...]

GB 32 TECHNICAL SPECIFICA TIONS T ransmission Standards DVB, MPEG 2 RF input (OFDM)/Modulator output Loop through output Input/output connector IEC female / IEC male RF input frequency 470 to 862 MHz RF input power level -77 dBm RF impedance 75 Ω Frequency range Loop through 47 to 864MHz Frequency range Re-modulator 470 to 862 MHz Output channel [...]

GB 33 Main Menu 1 Channels 2 Edit Channels 3 Guide 4 System Configuration 5 User Preferences 6 System Information 7 Viaccess Embedded System Configuration 1 Channel Search 2 TV Settings 3 Modem Configuration 4 Receiver Upgrade 5 Reinstall Parental Control 1 Receiver Lock Off 2 Age rating Control On 3 Age Limit 15 4 Change Access Code Viaccess Embed[...]

S 2 66 76938-11 © 0008 44 10285 230 V ± 15% 50 Hz WARNING! DO NOT OPEN – ELECTRICAL SHOCK HAZARD DIGIT AL AUDIO AUDIO R L TV AERIAL TELEPHONE SERIAL AUX TV TV / VCR Nokia is a registered trademark of Nokia Corporation www .nokia.se[...]