Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM инструкция обслуживания

OFF H IGH Manual,Instructions & Parts List P A TIO HEA TER FOR YOUR SAFETY If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. if odor continues ,immediately call gas supplier . FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. W ARN[...]

2 TOOLS AND P ARTS NEEDED FOR ASSEMBL Y TOOLS AND P ARTS NEEDED FOR ASSEMBL Y TOOLS N EEDED: 7/16 Wrench 3/8 Open End W rench Adjustable Opening Wrench, 8 Long Philips Head Screwdriver Leak Detection Solution ( Instructions how to make solution are included in Step 8 ) ＂ ＂ ＂ W ARNING Note: 20 Pound, 5 Gallon LPG T ank is not supplied Note: 20[...]

3 PA R T S PA R T S 15 17 1 Regulator 1 Cylinder (Not Supplied) 1 2 3 4 5 6 7 8 9 10 11 4 Reflector Cap 1 Head Assembly 1 Gas Hose 1 Post 1 Cylinder Cover 1 Cylinder Base 15 M6 Nuts 18 6mm W ashers 5 M4 8 Bolts x 3 Post Mounts 10 12 1 Center Reflector Cap 12 M6 10 Bolts x 13 15 16 3 M6 x70 double pointed bolts 14 5 4mm W ashers 12 13 9 17 16 6 M5 8[...]

4 PRECAUTIONS PRECAUTIONS Do not use the heater in an explosive atmosphere. Keep the heater away from areas where gasoline or other flammable liquids or vapors are stored. Prior to use, check for damaged parts such as hoses, regulators, pilot or burner . Never replace or substitute the regulator with any regulator other than the factory suggested r[...]

ASSEMBL Y FOR LIGHT SYSTEM ASSEMBL Y FOR LIGHT SYSTEM W ARNING: TO BE INST ALLED ONL Y BY AN AUTHORISED PERSON Instruction For Battery Installing Upon first time use of the product,please remove the ignition button and install an AAA battery as indicated. Ignition button Replace Battery Control knob Ignition button AAA battery 5[...]

6 ASSEMBL Y ASSEMBL Y NOTE: Assembly of this heater req uires basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Step 1 ---- Step 1 Step 2 ---- Step 2 M5 X 8 bolts (6 pcs) and 5mm washers (6 pcs) Attach the post to the post mounts using Attach Post to Base Assembly 7 Attach Cylinder Cover to Post Mounts Attach the c[...]

7 ASSEMBL Y ASSEMBL Y NOTE: Assembly of this heater req uires basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Step 3 ---- Attach Head Assembly to Post Load head assembly by inserting gas hose into post. Insert head assembly into post. Tighten securely using M4 X 8 Bolts (5 pcs) and 4mm washers (5 pcs). Step4 ----[...]

Step 5 ---- Attach Center Reflector to Reflector Attach center reflector to the top of reflector (4 pcs) by M6 X 10 mm screws (12 pcs) , Step 5 2 1 15 6mm washers (12 pcs) and nuts (12 pcs). Step 6 ---- Attach Center Reflector and Reflector Load center reflector and reflector to the top of head assembly by M6 X 70 double pointed bolts (3 pcs) to th[...]

9 ASSEMBL Y ASSEMBL Y Step 7 Step 8 NOTE: Assembly of this heater req uires basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Step 7 ---- Connect Gas Line to Cylinder Step 8 ---- Check for leak Attach Gas hose to regulator with 3/8 Inch Open End Wrench and Adjustable Wrench. Attach regulator to cylinder . T ighten [...]

10 ASSEMBL Y ASSEMBL Y Step 9---- Lower Cylinder Cover onto Cylinder Base Lower the cylinder cover onto the cylinder base . Step 9 6 8 W ARNING : TO BE INST ALLED ONL Y BY A COMPETENT PERSON Step 10---- Step 10 6 Disconnect Cylinder When Storing or Transporting 7 1).T urn off the heater; 2).Upper the cylinder cover onto the post mounts; 3).T urn of[...]

OPERA TION OPERA TION W ARNING : DO NOT attempt to operate heater until you have read and understand all precautions. Failure to do so can result in serious personal injury , death or property damage. Before T urning Gas Supply ON Y our heater was designed and approved for OUTDOOR USE ONL Y . Do NOT use it inside a building ,or any other enclosed a[...]

OPERA TION OPERA TION OPERA TION OPERA TION CAUTION : A void inhaling fumes emitted from the heater's first use. Smoke and odor from the burning of oils used in manufacturing will appear . Both smoke and odor will dissipate after approximately 30 minutes. The heater should NOT produce thick black smoke. "" OW NOTE: When heater is ON:[...]

13 LOCA TING HEADER FOR USE LOCA TING HEADER FOR USE Figur e 1 T his heater is primarily used for the heating of outdoor patios, decks, spas, pool and open working areas. Always make sure that adequate fresh air ventilation is provided. Follow the spacing tolerances shown in Figure 1. The minimum clearances, shown in Figure 1, must be maintained at[...]

14 MAINTENANCE/STORAGE MAINTENANCE/STORAGE MAINTENANCE : T o enjoy years of outstanding performance from your heater make sure you perform the following maintenance activities on a regular basis: Keep exterior surfaces clean. Use warm soapy water for cleaning. Never use flammable of corrosive cleaning agents. While washing your unit, be sure to kee[...]

15 TROUBLESHOOTING TROUBLESHOOTING PROBLEM PROBABLE CAUSE SOLUTION Pilot will not light Gas valve may be OFF T urn the gas valve ON Orifice blocked Clean or replace Orifice Air in supply system Purge air from lines Pilot will not stay on Debris around pilot Clean dirty area Loose connection T ighten connection Thermocouple bad Replace Thermocouple [...]