Ironman Fitness INSPIRE инструкция обслуживания

Owner’ s Manual Ironman INSPIRE T readmill Service (800) 750-4766 Assembly (888) 559-8810 Ironman Fitness Product s 4009 Distribution Drive Suite 250 Garland, TX 75041 www .ironmanfitness.com Model Name : INSPIRE Serial Number : Write down for future reference Serial Number Decal Location 415-00026 09/05 Rev B CAUTION! Read all precautions and in[...]

T able of Contents 2 Important Safety Information 3 Before Y ou Start 4 Assembly 5-9 Moving Instructions 10 Power Requirements 1 1 Console Panel Functions 12 Program Operation 13-14 Program Profiles 15 Heart Rate Mode 16 Monitoring Y our Heart Rate 17-18 W orkout Information 19-20 W arm Up Exercises 21 Changing to MPH or KM 22 Calibration Sequence [...]

Impor tant Saf ety Inf or ma tion 3 W ARNING! Before using this treadmill or starting any exercise program, consult your physician. This is espe- cially important for persons over the age of 35 and/or persons with pre-existing health problems. The man- ufacturer or distributor assumes no responsibility for personal injury or property damage sustain[...]

Bef or e Y ou Star t Thank you for purchasing the Ironman INSPIRE T readmill! This quality product you have chosen was designed to meet your needs for cardiovascular exercise. Before you start, please read the Owner's Manual and become familiar with the operation of your new treadmill. Remember to take the time to perform the str etching exerc[...]

Assembl y The Ir onman INSPIRE T readmill will require assembly before operating. After opening the box, remove any packing material from the treadmill. Do not throw away any packing materials until the unit is working pr operly . Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet. If at a[...]

Assembl y Assembly requires the included allen wrench and phillips screwdriver . Do not plug in the power cord until all assembly steps ar e completed. 6 Figure 1: Console Harness Location Figure 2: Console Harness Connection 1. Leave the unit on the original packing material to assemble all parts. Caution: Make sure harness is installed inside the[...]

Assembl y 7 Figure 3: Left and Right Upright Installation Figure 4: Console Installation 4. Install the Left and Right Uprights to the tread- mill base frame by inserting the upright connect- ing bracket into base frame as seen in Figure 3, using Allen Bolt 5/16”-18 x 70 (Qty . 4), Spring W asher 8 mm (Qty . 4), and W asher 9*16*1.6 mm (Qty . 4).[...]

Assembl y 8 7. Position the Left and Right Bottom Handle Covers to underside of handle assembly , then connect the EKG Harness W ires to the Left and Right Bottom Handle Pulse Plates as shown in Figure 5. T ighten into place using Philip Screw ST4.2X16 (Qty . 2) and Philip Flathead Screw 4.2*16 (Qty 4). Next, install the End Caps to the handle asse[...]

Congratulations! Y ou have completed the assembly of your new Ir onman INSPIRE T readmill! Assembl y 9 10. Install the Left and Right Fenders to Base using Philip Screw ST4.2X16 as shown in Figure 8. Figure 8: Left and Right Fender Installation LEFT FENDER BASE PHILIP SCREW ST4.2x16 RIGHT FENDER 1 1. Assembly is complete. Move T readmill to permane[...]

Mo ving Instr uctions 10 CAUTION! TO A VOID THE RISK OF INJUR Y , NEVER A TTEMPT TO MOVE THE TREADMILL WHILE IT IS IN THE UNFOLDED OPERA TING POSITION. T O REDUCE THE POSSIBILITY OF INJUR Y WHILE LIFTING , BEND YOUR LEGS AND KEEP YOUR BACK STRAIGHT . AS YOU RAISE THE TREADMILL, LIFT USING YOUR LEGS, NOT YOUR BACK. IN ORDER TO RAISE OR LOWER THE TRE[...]

P ow er Requirements 11 I MPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESUL T IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SER VICE MAN IF YOU ARE IN DOUBT AS T O WHETHER THE PRODUCT IS PROPERL Y GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT . IF PLUG WILL NOT FIT THE OUTLET , HA VE A PROPER OUT[...]

Console P anel Functions There are five display windows on the control panel to provide feedback information. TIME / P ACE WINDOW : TIME: Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds) INTER V AL TIME: Indicates countdown in seconds to the next interval starting at 5 seconds and counting to 0 seconds[...]

QUICK ST AR T / MANUAL MODE 1. Plug into a surge protector outlet. Attach the Safety Key to the treadmill console. 2. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes. 3. Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered. 4. Press ST AR T/STOP butto[...]

Pr ogr am Operation PROGRAM MODE Plug treadmill into a surge protector outlet. Attach the Safety Key on to the treadmill console. 1. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes. 2. Press POWER button. There will be an eight (8) second delay before data can be entered. 3. There are three (3) pre-set, six (6) semi[...]

Pr ogr am Profiles 15 The Fat Burn Pr ogram is designed to vary the treadmill elevation, while maintaining a constant walking belt speed. The Cardio Pr ogram is designed to vary the treadmill Speed, while maintaining a con- stant Elevation. The W arm Up Program is designed to gradually increase the treadmill Speed and Elevation in the first segment[...]

HEAR T RA TE MODE The treadmill may be used at any time in the Heart Rate Mode. The Heart Rate program is designed to keep your heart at a desired amount of “beats per minute” by automatically adjusting the incline. For example, you have programmed in a desired heart rate of 125 BPM and your heart rate is only at 1 10 BPM. If you are wearing th[...]

Monitoring Y our Hear t Ra te 17 Monitoring Y our Heart Rate T o obtain the greatest cardiovascular benefits from your exercise workout, it is important to work within your target heart rate zone. The American Heart Association (AHA) defines this target as 60%-75% percent of your maximum heart rate. Y our maximum heart rate may be roughly calculate[...]

Monitoring Y our Hear t Ra te 18 100% 85% 75% 60% Serious athletic training range Cardiovascular conditioning range Fat burning range 20 25 30 35 40 45 50 55 60 65 AG E 200 195 190 185 180 175 170 165 160 155 170 166 162 157 153 149 145 140 136 132 150 146 143 139 135 131 128 124 120 116 120 117 114 111 108 105 102 99 96 93 T AR GET HEART RA TE ZON[...]

W or k out Infor mation 19 Fr equency , Intensity , Time, T arget Heart Rate Zone The exercise practices include four major variables: frequency , intensity , time, target heart rate zone. A contin- uous workout will help to improve your cardiovascular functions and increase the ability of your muscles to obtain the oxygen and nutrition. A good wor[...]

W or k out Infor mation 20 Exer cise Practice Pr ocedur es W arm-Up W orkout Cool Down A good warm-up will help you perform better and will decrease the aches and pains. The warm-up prepares your muscles for exercise and allows your oxygen supply to ready itself for what is to come. Experience tells us that muscles perform best when they are warmer[...]

W ar m Up Ex er cises 21 T OE TOUCH STRETCH Stand, bending your knees slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. This will stretch your ham- strings, back of knees, and back. HAMSTRING STRETCH Sit with one leg extended[...]

Change to MPH or KPH 22 Y our treadmill will operate in British Units (miles per hour) or International Units (kilometers per hour). All treadmills are calibrated at the factory for British Units (miles per hour). T o change the display to read in kilo- meters, follow the steps described here: 1) T urn power OFF on the console. (Do not unplug tread[...]

Calibr a tion Sequence 23 Do not attempt to calibrate the treadmill unless an Err or Code is present. See Err or Messages (page 26). Our treadmill is equipped with a software package that will perform a calibration sequence unique to your specific model number . Please perform the following steps to calibrate the Ir onman INSPIRE T readmill. 1. Unp[...]

Belt Adjustment 24 W ARNING! Do not over -tighten rollers! This will cause prema- ture r oller bearing failure! Belt adjustment and tension performs two functions: adjustment for tension and centering. Y our new treadmill comes pre-adjusted from the factory for tension and centering. Please follow the procedures below if the belt shifts to the left[...]

Maintenance Instr uctions 25 W ARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector . CLEANING: Routine cleaning of your unit will extend the life of your unit. W ARNING! T o prevent electrical shock, be sure the power to the treadmill is OFF and the unit is unplugged from the wall elect[...]

Er ror Messa ges 26 T readmill Err or Messages . Y our treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. The following error codes will be displayed in the console display windows. Safety Interlock Err or Messages SI 1 - Safety key missing, replace and try again. SI 2 - Over voltage p[...]

T r oubleshooting Guide 27 T readmill will not start . 1. Is the Safety Key inserted into the treadmill Console? 2. Make sure the power cord is plugged into a surge protector , the surge protector is plugged into a properly grounded outlet, and the surge protector is turned on. (Refer to “Power Requirements” on page 1 1 .) 3. Check the circuit [...]

P ar ts List 28 REF ITEM DESCRIPTION QTY REF ITEM DESCRIPTION QTY 1 423-00043 CROSS BAR, INSPIRE 1 51 410-00042 LATCH GUIDE, 150T.1/220/320/INSPIRE 1 2 406-00055 BASE BUMPER, 38*33*15 2 52 406-00044 REAR WHEEL 4 3 406-00056 LONG BUMPER, 43*35*45 2 53 402-00050 POWER METAL BUSHING 9 4 423-00042 LEFT UPRIGHT, 150T.1/320T.1/220T.1/INSPI 1 54 402-00046[...]

P ar ts List 29 REF ITEM DESCRIPTION QTY REF ITEM DESCRIPTION QTY 101 410-00016 BELT GUIDE BRACKET 2 135 408-00014 FUSE 2 102 406-00057 POWER CORD SPACER 1 136 408-00015 CIRCUIT BREAKER 1 103 406-00119 HANDLE CAP, 150T.1/220T.1/320T.1/INSPIRE 1 137 407-00005 CONSOLE FAN MOTOR 1 104 406-00079 BASE BUMPER, 28*25*13 2 138 413-00016 REED SWITCH 1 105 4[...]

Exploded V iew 30 10 4 5 6 7 8 9 11 12 14 19 21 22 23 24 25 26 27 45 44 52 54 54 53 55 56 57 58 61 62 63 64 65 67 66 69 70 71 72 73 74 75 76 77 79 84 49 50 90 91 89 99 130 131 80 84 107 128 144 156 155 149 135 142 105 47 34 84 3 42 112 108 126 125 127 104 2 111 82 81 110 59 78 117 39 20 60 17 100 15 88 16 18 51 101 86 87 99 103 106 107 113 118 124 [...]

Exploded V iew 31 93 121 119 138 109 157 147 148 151 150 145 120 122 137 123 122 153 160 159 152 28 29 30 31 32 33 34 35 36 37 40 41 43 48 92 47 94 85 97 96 95 13 98 46 164 165 167 168 169 84 WIRE HARNESS 136 132 129 139 143 134 141 146 140 116 102 133 158 CONSOLE[...]

W ar ranty Infor ma tion 32 IRONMAN FITNESS INSPIRE LIMITED W ARRANTY Residential W arranty Frame: Lifetime Motor: 12 Y ears Parts (Includes W alking Belt and Deck : 2 Y ears Labor: 1 Y ear This Limited W arranty applies in the United States and Canada to products manufactured or distributed by Ironman Fitness (“Ironman”) under the Ironman bran[...]

Service (800) 750-4766 Assembly (888) 559-8810 Ironman Fitness Pr oducts 4009 Distribution Drive Suite 250 Garland, TX 75041 www .ir onmanfitness.com Ironman and M-dot ar e registered trademarks of the W orld T riathlon Corp., used here by permission.[...]