Electrolux EWT 136580 W инструкция обслуживания

user manual Washing Machine EWT 136580 W[...]

3 2 4 1 1. The control panel 2. Lid button 3. Filter access cover 4. Adjustable le velling feet The control panel 13 4 5 2 1. Progr amme s ele ctor 2. Displ ay 3. Pushbuttons and their functions 4. "Start/Pause" pushbutton 5. "Time manager" pushbuttons The symbols 9 8 10 12 3 4 7 6 5 1. Temperature 2. Spin speed 3. Options 4. De[...]

Dispenser box Prewash Wash Softener (do not fill above the MAX symbol M ) Safety Information Please read these points car efully before installing and using your appliance. Keep this user manual with your appliance. General safety • Do not modify or a ttempt to modify this app li- ance. This would put yourself in danger. • Ensure that all coins[...]

Personalisation Child safety This option provides two types of locking : • if the option is activat ed after the cycle has star- ted, no changes to the options or prog ramme is possible. The cycle runs and you must deactivate the op- tion to run a new cycle. • if the option is activated before the cycle has started, the appliance cannot be st a[...]

the symbols disa ppear. If on e of the options is not compatible with the selected programme, “Err” flashes on the display an d the “S tart/Pause” p ush- button flashes red. “Prewash” option The appliance runs a prewash at 30°C max. “Rinse plus” option The washing machine will add one or more rinses during the cycle. This option is[...]

End of the programm e The washing machine stop s automatically ; the “Start/Pause” pushb utton goes out and “0” flas hes on the display. The lid can only be opened around 2 minutes after the washing machine has come to a stop. The symbol disappears. Turn the programme selector to the “Stop” position. Re- move washing. Unplug and close w[...]

Programme / Type of washing Load Possible options Steam Re fresh : For every types of fab- ric. Remove the smells of dry-cleaning, cam- phor, perfume. Reduce the smells o f smoke. Can not remove animals smells. 1,0 kg 1) Reference programme for test confirming to CEI 456 standard : 45 L / 1,02 kWh / 175 min 2) To use on dried lau ndry, with out det[...]

Problem s Causes The washing machine doesn’t start or doesn’t fill : • the appliance isn’t plugged in correct ly, the electrical installation isn’t working, there is a power failure, • the lid of your appliance and the dr um shutters aren’t closed firmly, • the programme start command hasn’t been pr operly selected, • the water [...]

Problem s Causes The E10 error code ap- pears in the display 1) and the “Start/Pause” p ush- button flashes red 2) : • the water tap is cl osed, • the water supply has been cut o ff. The EF0 error code ap- pears in the display 1) and the “Start/Pause” p ush- button flashes red 2) : • the drainage filter is obstructed, • the anti-flo[...]

Unpacking 1 2 3 4 Untying 2 3 1 b a 1a 1b 2a 2b 3 4 To install your washing machine at the same level as surrounding furniture, proceed as shown on picture 4. Water supply Install the supplied water inlet hose at the rear of your washing machine by proceeding as follows. Do not reuse an old hose. The water inlet hose can not be extended. If it is t[...]

Environment Disposing of the appliance All materials carrying the symbol are re- cyclable. Dispose of them at a wast e collec- tion site (enquire at your local council) for collection and recycling. Wh en disposing of your appliance, remove all parts which could be da ngerous to oth- ers: cut off the power supply cable at the base of the appliance.[...]

ANC 108 5123 00 - 5 1/09 www.electrolux.com For more information, please visit : www.electrolux.com[...]