Delta CL180JS инструкция обслуживания

T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582). INSTRUCTION MANUAL Cor dless Jigsaw (Model CL180JS) P ART NO. 912236 - 05-20-04 Copyright © 2004 Delta Machinery ESP AÑOL: PÁGINA 15[...]

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of California) to cause cancer , birth defects or other repr o- ductive harm. Some example of these chemicals are: ● ● lead from lead-based paints ● ● crystalline silica from bricks and cement and other ma[...]

3 2. Dress pr operly . Do not wear loose clothing or jewelry . Contain long hair . Keep your hair , clothing, and gloves away from moving parts. Loose clothes, jewelry , or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sur e switch is in the locked or off posi- tion before inserting battery pack. Carrying tools with your[...]

4 ADDITIONAL SPECIFIC SAFETY RULES 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tools may contact hidden wiring. Contact with a “live” wir e will make exposed metal parts of the tool “live” and shock the operator . 2. Be aware that this tool is always in an operating condition, because it does n[...]

5 3 ........................ three-phase alternating current 3 N ........................ three-phase alternating current with neutral ........................ direct curr ent n 0 ........................ no load speed ........................ alternating or direct current ...................... Class II Construction ........................ splash[...]

6 10. Do not disassemble charger or battery pack. T ake it to a qualified ser- viceman when service or repair is r equired. Incorr ect reassembly may r esult in a risk of electric shock or fire. 11. Unplug charger from outlet befor e attempting any maintenance or clean- ing – to reduce risk of electric shock. 12. Charge the battery pack in a well[...]

As a battery pack approaches the dischar ged state, you will notice a sharp drop in tool performance. When the tool is unable to perform the task at hand, it is time to rechar ge the battery pack. Rechar ging the battery pack before this condition is reached will r educe the total work life of the pack. Discharging the pack beyond this point can da[...]

8 INST ALLING OR REMOVING BA TTER Y P ACK TO INST ALL BA TTER Y P ACK: Align rails (A) Fig. 4, on battery pack with slots on tool and push battery pack onto tool until it locks in place. TO REMOVE BA TTER Y P ACK: Depress the battery r elease button (B) Fig. 4, and pull battery pack out of tool. Fig. 4 ASSEMBL Y BLADE INST ALLA TION 1. Raise the bl[...]

9 5. With the teeth of the blade fac- ing away from the saw , insert the blade through the blade guide (G) Fig. 8, into the blade holder (H) as far as it will go and tighten the two screws (F) Fig. 7. 6. Lower the blade guard (A) Fig. 5, by pushing down on tab (B). 7. Install battery pack. Fig. 8 A VOID CONT ACT WITH THE BLADE TEETH TO PREVENT PERS[...]

10 BASE ADJUSTMENT REMOVE THE BA TTER Y . A VOID CONT ACT WITH THE BLADE TEETH TO PREVENT PERSONAL INJUR Y . The base may be adjusted two ways, front to r ear and tilted either left or right for making bevel cuts. The base has a detente at the 0 (90 degree) setting and at 45 degr ee set- ting both left and right of center . The base is set at its f[...]

11 BLADE WRENCH STORAGE The tool has a blade/wrench storage area located on the back of the tool. T o open the blade/wrench storage unit, pull out on tab (A) Fig. 11. The blades and base adjustment wrench can be stor ed in the opening as shown in Fig. 12. Fig. 11 Fig. 12 A[...]

12 MAINTENANCE KEEP TOOL CLEAN All plastic parts should be cleaned with a soft damp cloth. NEVER use sol- vents to clean plastic parts. They could very possibly dissolve or otherwise damage the material. F AILURE TO ST ART Should your tool fail to start, make sure battery pack is char ged and properly installed in tool. BA TTER Y The battery pack w[...]

13 A complete line of accessories is available from your Porter -Cable • Delta Supplier , Porter -Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our W eb Site www .deltama - chinery .com for a catalog or for the name of your nearest supplier . Since accessories other than those offer ed by Porter - Ca[...]

T wo Y ear Limited New Pr oduct W arranty Delta will repair or r eplace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer r eturns the product pr epaid to a Delta factory service center or authorized servi[...]

The following are trademarks of PORTER-CABLE • DEL T A (Las siguientes son marcas registradas de POR TER-CABLE • DEL T A S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DEL T A): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’ s Saw ® , Contractor’ s Saw ® , Contractor’ s Saw II™, Delta ® , DEL T A[...]