Black & Decker KS629-638SE инструкция обслуживания

KS890E[...]

Congratulations! On the purchase of your Black & Decker saw . T o ensure the best results from your saw please read these safety and usage instructions carefully . If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual[...]

Contents Page 4 Safety instructions Double insulation Page 5 Electrical safety Mains plug replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee Page 6 Accessories T echnical data Features Removal & refitting the blade Page 7 Removing the blade Fitting a blade Operating your Scorpion Saw Recommended Mat[...]

4 SAFETY INSTRUCTIONS Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury . Read all these instructions before attempting to operate the product and save this booklet. For safe operation: • Keep the work area clean. Cluttered areas and ben[...]

5 ENGLISH Note: Double insulation does not take the place of normal safety precautions when operating the tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. ELECTRICAL SAFETY Be sure the supply is the same as the voltage given on the rating plate. The tool is f[...]

6 ENGLISH If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity , within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless[...]

7 ENGLISH Always ensure the unit is unplugged from the power supply when changing blades. Always ensure the tooth protector is fitted when changing blades. REMOVING THE BLADE Ensure blade has cooled after use. Press and hold the rear of the blade release button fully , hold the back of the blade and rotate the blade through 90 ° as shown in the di[...]

8 RECOMMENDED MA TERIALS Recommended materials Capacity Large capacity blade Soft wood Up to 100mm x 100mm Plastic soil pipe Up to 125mm Ø Curve cutting blade Worktop Up to 50mm Metal cutting blade Ferrous/non-ferrous metals Up to 3mm thick CLEANING Disconnect your Scorpion Saw from the power supply . Use only mild soap and a slightly damp cloth t[...]

9 TYP. KS890E E12904.FH5 www.2helpU.com 14-02-00 CW 1 101 104 105 107 106 108 11 0 111 11 2 11 3 11 7 11 8 109 108 11 6 11 4 131 128 127 126 125 102 133 132 120 121 122 123 124 101 134 142 138 141 11 5 131 129 130 144 103 140 143 139[...]

Part No: 571143-01 Australia D E WALT Industrial Power Tool Company Tel. 03 9895 9200 7 Clarice Road Fax 03 9899 7465 Box Hill, Victoria 3128 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnson Drive Fax 09 579 8200 Penrose, Auckland, New Zealand South Africa Black & Decker South Africa (Pty) Ltd Tel. (011) 653-1400 Physical address[...]

Dealer address Date of purchase ✁ Name: ...................................................................................................... Address: ................................................................................................... T own: .........................................................................................[...]

Part No: 571143-01 GUARANTEE CARD Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your country . If you live in Australia or New Zealand, please register by using the alternative guarantee car d supplied. ✁[...]