Samsung SVP-5500 manual

SAMSUNG OPTO-ELECTRONICS AMERICA, INC. 40 Seaview Drwe, Secaucus N.J. 07094, U.S.A. TEL: 1-800-762-7746, 1-201-902-0347 FAX: 1-201-902-9342 SAMSUNG TECHWIN CO. LTD 145-3 Sangdaewon 1-Dong, Jungwon-Gu, Sungnam, Kyungki-Do, Korea 462-121 TEL: 82-342-740-8137~8141 FAX: 82-342-740-8145 SAMSUNG SAO PAULO OFFICE. Rua Professor Manoelito de Ornellas 303 2[...]

SVP-5500 V ideo Pr esenter User’s Guide SVP-5500 V ideo Pr esenter User’s Guide[...]

Featur es Various image control Digital features on your Video Presenter provides useful and various image controls including: -Negative/positive image conversion -Brightness and R/B color control -Flicker reduction -Image rotation up to 180 o -Image Freeze (SVP-5500DX only) Input source selection You can quickly switch between your computer presen[...]

Safety Precautions ......................................... 2 Unpacking ...................................................... 3 Your video presenter ...................................... 4 Front view ..................................................... 4 Rear view ...................................................... 5 Controls ...............[...]

2 Follow these safety instructions when setting up and using your Video Presenter: 1. Do not place the presenter on an unstable cart, stand, or table. 2. Do not use the presenter near water or sources of heat. 3. Use the type of power source indicated on the presenter. If you are not sure of the power available, consult your dealer or power company[...]

3 When you unpack your Video Presenter, make sure that you have all these components. Optional accessories Power cable *1 Audio/Video cables Remote control USB cable *2 This User’s Guide S-video cable Adapter lens and lens cap Dust cover *1 The shape of power cable may differ, depending on your country. *2 Available for SVP-5500DX only. Unpacking[...]

4 Front view IR sensor Receives the signals from the remote control. Handle Control Panel See page 6. Light box Camera head Rotatable 120 o to top or bottom and 270 o to right or left. Head lock button Main lock button Arm lock button Use the button to adjust the height of the camera head. Lens adjuster Use the switch to adjust the lens angle. Arm [...]

5 Rear view VIDEO IN SUB CAMERA VIDEO OUT AUDIO IN MIC S-VIDEO LCD USB VGA IN RS-232C 100-240V AC, 50/60HZ, 2A CAUTION: FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE, REPLACE ONL Y WITH T2A 250V FUSE. 12 12 AUDIO OUT Connects optional microphone. S-VIDEO jack Sends video signals from your Video Presenter to a TV equipped with S- video input termi[...]

6 on the Contr ol panel 8 9 10 13 5 14 ZOOM INT/EXT AF LAMP NEGA/POSI AW C FREEZE IRIS POWER You can find the same function buttons both on the control panel of your SVP-5500 and the remote control. You can use any of them to perform the function. Contr ols Installing Batteries in the Remote Control Before using the remote control at first time, in[...]

7 on the Remote contr ol 16 15 12 11 7 6 3 4 1 2 POWER Turns power on and off. INT/EXT Allows to choose the signal input to be displayed. NEGA/POSI Switches image negative or positive. LAMP Turns the head lamps and/or lightbox on or off. FOCUS Allows to focus an object. F: Used to focus an object which is in the far distance. N: Used to focus an ob[...]

8 While you pull the main lock button toward the front of the presenter , lift the arm. Raise the head lamps at both sides. Holding the head, adjust the angle of the head. R emove the lens cap . Setting up Main lock button[...]

9 Adjust the angle of the lamps properly . While you hold the arm lock button, pull up the head to adjust the height. Plug the power cord in. Connect the output and another input device properly according to your needs. (See pages 10 through 13.) Arm lock button 230V 120V[...]

10 0 1 2 3 4 5 Connecting to output device T V or Monitor ■ Connect a TV or monitor to this presenter to display the projected image using the AV cables or S-video cable. ■ If you use an optional microphone or if your presentation includes sound effects which is received from AUDIO IN jack, you need to connect the audio cable to AUDIO OUT jack.[...]

11 0 1 2 3 4 5 Desk top computer ■ For SVP-5500DX, connect a desktop PC using USB cable and install the supplied SVP-5500 program. You can see the projected image on the PC monitor and control the image as a graphic file using the program. ■ RS-232C connection is available for advanced user. If you connect a PC with RS-232C cable, you should se[...]

12 Connecting ex ternal input AV device ■ If you want to use image from external video source such as as VCR, camcorder, laser disk player, DVD player, or any other compatible AV device, connect the device to your presenter. With the INT/EXT button on the presenter, you can switch the input source during presentation from this external source and[...]

13 Computer ■ If you connect computer through VGA IN port, you can receive video signal from the computer. Micr ophone ■ To enhance the presentation with the presenter’s voice guidance, use a microphone. Microphone is not supplied with this presenter. VIDEO IN SUB CAMERA VIDEO OUT AUDIO IN MIC S-VIDEO LCD USB VGA IN RS-232C 0/60HZ, 2A CAUTION[...]

14 14 Set up your video presenter properly . (see page 8 and 9.) Connect the input device from which you want to receiv e the image and the output device on which you want to see the image. (see pages 10 through 13.) T urn the power of the input and output device, and the video presenter on. When the video presenter is powered on, the head lamps tu[...]

15 If necessary , you can adjust the audio volume using the volume buttons on the remote control. If NO EXT SYNC is displayed, check if the external input device is connected properly. Choose the video source with the INT/EXT button of the presenter . Open the image on the A V device or computer . Now you see the image through the TV or monitor . I[...]

16 Set up your video presenter properly . (see page 8 and 9.) Connect to a TV or monitor to display the image. (see page 10.) T urn the power of the output device and the video presenter on. To project an object on the video presenter ZOOM IRIS POWER Place the object on the lightbox, and adjust the head to face the object. 0 1 2 3 4 5 If you want t[...]

17 Select a proper lighting source with the LAMP button of the presenter . Each time you press the button, head lamps on, lightbox on, then all lighting off . R emove or attach the adapter lens according to the object projected. INT/EXT AF LAMP NEGA/POSI AWC FREEZE 0 1 2 3 4 5 0 1 2 3 4 5 Rotate the lens to remove or attach it. • Adapter lens is [...]

18 F ocus on the object. • In most situations, it is better to use the automatic focus feature. Use AF button for automatic focusing. • In some conditions, however, automatic focusing may be inadequate. Then you must focus manually. Press FOCUS F (FAR) button or FOCUS N (NEAR) button on the remote control to focus on object being far away or on[...]

19 Adjusting your image Adjusting image size ZOOM IRIS ZOOM ◀ Press WIDE or TELE button on the remote control to reduce or enlarge the image size displayed on the screen. ◀ You can also use ZOOM or ZOOM button on the control panel of the presenter to achieve the same result. WIDE TELE Adjusting brightness ZOOM IRIS IRIS ◀ Press IRIS button on[...]

20 T LAMP NEGA/POSI AWC FREEZE AWC Positive and negative switching LAMP NEGA/POSI AWC FREEZE NEGA/POSI Adjusting image color ◀ For automatic color adjustment, press AWC button. ◀ If you want to fine adjust, press BLUE +/– or RED +/– button to increase or decrease blue or red color factor manually. The color level chosen will be displayed. B[...]

21 ■ You can save the image up to 8 frames into your video presenter's memory. After saving you will be able to recall it. Saving image in memory (for SVP-5500DX only) ◀ To save the image into the memory, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 8. ◀ If you want to recall the[...]

22 Saving custom user settings (for SVP-5500DX only) ■ After you adjust feature value, you can save the value for next time use. You can save up to 8 different custom user settings. ◀ To save the current value, press Save button and specify the memory location within 4 seconds using the number keys from 1 through 8. ◀ To recall your custom se[...]

23 This desktop LCD monitor allows you to monitor the image projected through your video presenter. The same image is displayed on the TV or projector connected to this unit. LCD monitor Connect to the LCD socket on the back of this presenter. MIC S-VIDEO LCD USB VGA IN 1 In addition to a main camera, your video presenter offers a small but very us[...]

24 T urn the power off and unplug the power cord. Attach the lens cap. While you pull the main lock button toward the front of the presenter , fold the head completely . F old the lamps on both sides completely . Storage[...]

25 T urn the head upside down. While you hold the arm lock button, lower the arm completely . Use the handle when you move it. When you do not use it for a long time, protect it with the cover supplied.[...]

26 Picture is not displayed. • Check that the brightness is proper. Adjust the brightness if necessary. See page 19. • Check for the video cable connection. • Check that the built-in fuse is blown. • Check that the lens cap is removed. Sometimes problems can be easily solved by checking a few basic things. Check below before you call for he[...]

27 1. Remove the fuse holder on the back of this unit using a screw driver. 2. Remove the blown fuse and replace it with a spare one. 3. Replace the fuse holder. Replacing fuse Fuse in use Spare The presenter does not respond to the remote control. • Check the batteries in the remote control. If they are used up, replace with new ones. See page 6[...]

28 Description Specifications Lens F1.4~2.7 f=3.9~62.4, 16 X POWER ZOOM Shooting area Max : 213 x 283mm, Min : 14 x 17.5mm Focus Powered (one-touch auto focus) IRIS Auto (with fine level adjustment) Upper • Side arm type Lower • Built-in light box NTSC Pickup device: 1/4 ” 410,000 pixels IT CCD Total pixels: 811 (H) x 508 (V) Effective pixels[...]