Electrolux EWS 105410 A manual

user manual Washing Machine EWS 105410 A EWS 125410 A[...]

Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Environment concerns 3 Technical information 4 Product description 4 Control panel 5 Programmes 7 Hints and tips 9 Before first use 10 Daily use 10 Care and cleaning 12 Troubleshooting 15 Installation 17 Subject to change without notice SAFET[...]

• Do not install and connect a damaged appliance. • Make sure to remove all packaging and transport bolts. • Make sure that the mains plug is discon- nected from the main s socket during in- stallation. • Only a qualified person must do the elec- trical installation, th e plumbing and the in- stallation of the applia nce. This to prevent th[...]

TECHNICAL INFORMATION Dimensions Width / Height / Depth 600 / 850 / 480 mm Electrical connection: Voltage Overall power Fuse Frequency 220-240 V 2100 W 10 A 50 Hz Level of protection against ingress of solid part icles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water [...]

ACCESSORIES 1 2 3 4 1 Inlet hose To connect the appliance to the cold water tap. 2 Large plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. 3 Plastic hose guide To connect the drain hose on the edge of a sink. 4 Small plastic caps To attach the protect ion cover to th e bottom of the appliance. C[...]

DISPLAY 2 A B C D The display shows : A •T h e d e l a y s t a r t When you press the delay start button, the display sh ows the del ay start time. B • The default spin speed of th e pro- gramme. • 'No Spin' ( 00 ). C • The disp lay symbols. The symbols appear on the display when the related functi on is set. D • The programme t[...]

PROGRAMMES Programme Temperature Type of load and soil Weight of load Programme phases Possible functions Bawe ł niane 90 – 75 °C White cotton with heavy soil. This programmes add also t he phase of hygiene to the laundry. max. 5 kg Wash Rinses Spin phase at the maximum speed + Bawe ł niane Eco 1) 60 °C White and fast coloured cotton with nor[...]

Programme Temperature Type of load and soil Weight of load Programme phases Possible functions We ł niane 40 °C – Cold Machine washable wool. Hand washable wool and delicate fab- rics with «hand washing» care symbol. max. 1 kg Wash Rinses Spin phase at 800 rpm — Handwash - Silk 30 °C Hand washable delicate fabrics with «hand washing» car[...]

energy and water consumption for washing that type of cotton laundry. They agree with EN60456. The actual water temperature may dif- fer from the declared cycle tempera- ture. HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in : white, coloured, synthetics, delicates and wool. • Obey the washing inst ructions that are on the laundry care l[...]

Level Type Water hardness °dH °T.H. mmol/l Clarke 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 BEFORE FIRST USE 1. To activate the drain system, put 2 litre of water in the main wash compartment of the detergent dispenser. 2. Put a small quantity of detergent in the main wash compartment of the deter- gent dispenser[...]

2. Pull out the detergent divider from its position (A). A 3. Put it into the special guides in the mid- dle of the compartment for the washing phase. When you use the detergent divider: – Do not u se gelati nous or t hick liquid detergents. – Do not put more liquid detergent than the edge of the detergent divid- er. – Do not set the prewash [...]

If the temperature and level of the wa- ter in the drum are too high, you can- not open the doo r. To open the appliance door: • Do the steps 1 and 2 again. • Wait for some minutes. • Make sure that no water is in the drum. AT THE END OF THE PROGRAMME • The appliance stops automatically. • The display shows the End symbo ls. • Turn the [...]

DETERGENT DISPENSER To clean the dispenser: 1. Press the lever an d pull the dispenser out. 2. Remove the top part of the liquid addi- tive compartment. 3. Clean all the parts with water. 4. Clean the dispenser recess with a brush. 5. Put back the dispenser in the recess. DRAIN PUMP Regularly examine the drai n pump and make sure that it is clean. [...]

3. Unscrew the filter to let the water flow out. 4. When the container is full of water, screw the filter again and empty the container. Do steps 3 and 4 again and again until no more water flows out from the drain pump. 5. Unscrew the filter and remove it. 1 2 6. Remove fluff and objects from the pump. 7. Make sure th at the impeller of the pump c[...]

4. Install again the inlet hose. Make sure that the couplings ar e tight to prevent leakages. 5. Open the water tap. EMERGENCY DRAIN Because of a malfunction, the appliance cannot drain the water. If this occurs, do step s (1) through (5) of 'To clean the drain pump'. If necessary, clean the pump. When you drain the water with the emer- g[...]

Problem Possible ca use Possible solution The programme knob is not in the correct position. Turn the programme knob in the correct position. The delay start is set. It is available only for models with the Delay start. To start immediately the programme, cancel the delay start. The appliance does not fill with water. The water tap is closed. Open [...]

Problem Possible ca use Possible solution The applian ce fills with water and drain imme- diately. The end of the drain hose is too low. Make sure that the drain hose is in the correct position. Refer to 'Installation'. The washing results are not satisfactory. The detergent you used was not sufficient or correct. Increase the detergent q[...]

3. Remove the internal film . 4. Open the door and remove all the items from the drum. 5. Put the front piece on the floor behind the appliance. Care fully put down the appliance with the rear side on it. M ake sure not to damage the h oses. 6. Remove the polystyrene protection from the bottom. 1 2 7. Install the plastic cover (A), removed from the[...]

10. Put the plastic caps in the holes. You can find these caps in the user manual bag. Warning! Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packaging and the transit bolts for when you move the appliance. POSITIONING AND LEVELLING • Install the appliance on a flat hard floor. •[...]

With the plastic hose guide. • • On the edge of a sink. Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a height of not l ess than 60 cm and not more than 90 cm. The end of the drain[...]

electrolux 21[...]

22 electrolux[...]

electrolux 23[...]

155219270-A-3 52011 www.electrolux.com/shop[...]