Edimax LAN USB Adapter manual

802.11b/g/n Draft 2.0 Wireless LAN USB Adapter User Manual V ersion: 1.0 (April, 2007)[...]

- 1 - COPYRIGHT Copyright ©2005/2006 by this company. All rights re serv ed. No part of this publication may be reproduced, transmitted, transcribed, stored in a retri eval system, or translated into any language or compu ter language, in any form or by any means, electronic, m echanical, m agnetic, optical, chemical, manual or otherwise, without [...]

- 2 - CA T ALOG Chapter I: Product Informati on .............................................................................................. 3 1-1 Introduction and safe ty inform ation ......................................................................... 3 1-2 Safety In formation ...............................................................[...]

- 3 - Chapter I: Product Information 1-1 Introduction and safety information Thank you for purchasing this nMAX wireless net work ca rd! Excepting common wireless st andards 802.1 1b/g, this wireless network ca rd is also 802.1 1 Draf t-N comp at ible - data transfer rate is 300Mbp s, and that’ s six times faster than 802.1 1g wireless net work! [...]

- 4 - 1-2 Safety Information In order to keep the safety of users and your propert ies, plea se follow the fo llowing safety instructions: 1. This USB wirel ess network card is d esigned for indoor use only . DO NOT expose this network card to direct sun light, rain, or snow . 2. DO NOT p ut this network card at or near hot or humi d places, like k[...]

- 5 - 1-3 System Requirement s  An empty USB 2.0 port (May not work on USB 1.1 port, and performance will be greatly reduced)  Operation system: Windows 2000, XP , XP64,or Vist a  CD-ROM drive  At least 100MB of available disk sp ace 1-4 Package Content s Before you starting to use this wireless network card, pl ease check if there’ s[...]

- 6 - 1-5 Familiar with your new wireless network card 1. USB Connector 2. Connector Cap (T o protect USB connector when not i n use) 3. Link/Activity LED LED Name Light St atus Description On Linked to a wireless access point / T r ansferring data Link / Activity Off No wireless activity 1 2 3[...]

- 7 - CHAPTER II: DRIVER INST ALLA TION AND CONFIGURA TION 2-1 Network Card Inst allation Please follow the following instructions to inst all your new wireless network card: 1. Insert the USB wireless network card into an em pty USB 2.0 port of your comput er when computer is switched on. Never use force to insert the card, if y ou feel it’ s st[...]

- 8 - 3. The following message will appea r on your computer , click ‘Cancel’. 4. Insert device driver CDROM into the CD/DVD ROM drive of your computer , and execute ‘Setup.exe’ program in ‘Driver’ folder . Please read the end user license agreement and click ‘Y es’ to accep t license agreement.[...]

- 9 - 4. Y o u can choose the configu ration tool used to con figure the wi reless netw ork card h ere. It’s recommen ded to select ‘Edimax Configuration T ool’, which provides fully access to all function of this wireless network card. If you prefer to use the wireless configuration t ool provided by Windows X P or V ista, please select ‘M[...]

- 10 - When you select one mode, please click ‘Next>’ to continue. If you see ‘Found Ne w Hardware’ message again, please ignore it and wait. 6. Please click ‘inst all’ to run the driver inst allation process. If you see ‘Found New Hardware’ message again, please ignore it and wait.[...]

- 11 - 7. Please wait while the install procedure is running. When you see this me ssage, please click ‘Finish’ to complete the driver inst allation process.[...]

- 12 - 8. A new icon will appear at lower-right corn er of your computer deskt op, you can put the mouse cursor on the icon, and the status of wireless card will be displayed as a popup balloon. 9. When you want to configure your wireless connec tion, please right click on this icon, and a po pup menu will appear . Y ou can click ‘Launch Config U[...]

- 13 - 2-2 Connect to Wireless Access Point There are two ways you can configure your wireless netwo rk card to connect to wireless access point: using the Ralink configuration utility which comes with wireless card driver , and using built-in windows zero configuration utility . 2-2-1 Using Edimax Utility Please follow the following instructions t[...]

- 14 - Here are descriptions of every setup item: SSID: The Service Set IDentifier of wi reless access point or other network devi ce. Y ou can think it as the name of access point of wirele ss device. BSSID: The MAC address of wireless access point or other network device. Unlike SSID, BSSID of every access point or network device is unique, and w[...]

- 15 - Authentication: Shows the authent ication mode that acce ss point or wireless devi ce uses. If the wireless access point does not requi re authentication, you’ll see ‘ Unknown’ displayed here. Network T ype: Shows the type of wireless connection. If it’ s a wire less access point, ‘Inf rastructure’ will be displayed here; if it?[...]

- 16 - If the access point you selected doe s not enable encryption (The content of ‘Encrypti on’ field of the access point you selected is ‘None’, you’ll be connected to this wireless a ccess point within one minute. Please jump to step 6. If the access point you selected enabl es en cryption, please proceed to next step. 4. If the wirel[...]

- 17 -[...]

- 18 - 6. Y ou’ll see ‘Connect ed <-> SSID’ (‘SSID’ is the SSID of the wire less access point or wi reless device you connected to) message displayed at lower-lef t corner of configuration utility , congratulations, you’re successfully con nected to the ac cess point or wirele ss device you selected! 7. Y ou can put the mouse curs[...]

- 19 - 2-2-2 Using Windows Zero Configuration Windows XP and V ista has a built-in wireless network configuration utility , called as ‘Windows Zero Configuration’ (WZC). Y ou can also use WZC to configure your wireless net work parameter: 1. Right-click Edimax configuration utility icon and select ‘Use Zero Configuration as Configuration util[...]

- 20 - 3. Right-click ‘Wireless Network Connection’ (it may have a number as suffix if you have more than one wireless network ca rd, please make sure you right -click the ‘Ediamx 802.1 1n Wi reless LAN Card), then select ‘View Available Wireless Networks’. 4. All wireless access point s in proximity will be displa yed here. If the access[...]

- 21 - 5. If the access point is protected by encry ption, you have to input its se curity key or passphra se here. It must match the encryption setting on the access point. If the access point you selected does not use encryption, you’ll not be prompted for security key or passphrase. 6. If you can see ‘Connected’ message, the connection bet[...]

- 22 - 2-3 Connection Profile Management If you need to connect to dif ferent wireless acce ss point s at different time, like of access p oint of your home, office, cyber cafe, or public wireless service, you can store the conne ction paramet ers (encryption, p assphrase, security etc, etc.) as a profile for every a ccess point, so you don’t hav[...]

- 23 - Or , you can add a connected wireless a ccess point or wirele ss device to a profile by clicking ‘S ite Survey’ tab, then click ‘Add to Profile’ button:[...]

- 24 - And you can set the param eter for this connection here:[...]

- 25 - Here are descriptions of every setup items: Profile Name Please give this profile a na me, up to 32 alphanumerical characters and symbol s are allowed, but sp ace is not allowed. SSID The SSID of the wireless access point or wireless device you selected will be displayed here. But if the SSID of access poi nt or wireless device is not availa[...]

- 26 - TX Power Y ou can select the radio output pow er of wireless network card. Y ou may not need full radio power if you’re not far from wireless acce ss point, and only use a high setting here if you found that radio reception is bad. If you don’t know which one to use, sel ect ‘Auto’. Preamble This option is only available when the net[...]

- 27 - Here are descriptions of every setup items: Authentication Select the authentic ation type of the wireless access T ype point or wireless device you wish to con nect. If you’re adding a profile from an existing access point or wirele ss device, the value will be selected autom atically , and please do not modify it. If you select ‘LEAP?[...]

- 28 - grayed out. WEP Key Y ou can select key type (Hex or ASC II) and input WEP key here. If encryption is not enabled, or you select ‘WP A ’ as encrypti on type, this field will be disabled an d grayed out. Show Password Check this box and all pa ssphrases or security keys yo u inputted will be displayed as you type, but not replace your inp[...]

- 29 - Select the profile you wish to use, and click ‘Activate’ to use the profile you sele cted. Y ou can only activate a profile a time, and the profile that is ac tivated currently will have a green check ( ) before its na me. If the wireless access point is not reachable, a red check ( ) will be displayed before it s name. If you want to ch[...]

- 30 - 2-3-2 Using 802.1x – Certification After you click ‘802.1x Setting’, a new wi ndow will appear: Here are descriptions of every setup items: Authentication Please select an 802.1x authentication type here. T ype The type you select here must be ide n tical to the type of the 802.1x authentication type you’re using. Session Y ou can en[...]

- 31 - Use Client If the authentication ty pe you use is ‘PEAP’ or ‘TTLS’ , you can use the certificate stored on your computer . If the authenticat ion type you use is ‘TLS/Smart Card’ , this box is alwa ys checked. More.. Af ter you clicked this button, you’ll be prompted to select a certifica te on your computer . Allow This box is[...]

- 32 - 2-3-3 Using 802.1x - CA Server If you want to use CA server , please click ‘CA Server ’ tab. And the following message will be displayed: Here are descriptions of every setup items: Use certificate Check this box to enable the use of certificate chain. chain Certificate Please select the issuer of certificate from this drop down menu. Is[...]

- 33 - exactly you set here is exactly matched with the CA server connected to. If they don’t match, connection will be dropped. Domain name Check this box and the wireless c onfiguration utility will ch eck the end of domain must end name. If there’ s anything wrong, connection will be d ropped. in specified name After you finish all settings,[...]

- 34 - 2-4 V iew Network S t atistics and Link S t atus The configuration utility provides information about net work statistics and link st atus. If you want to know how your wireless network ca rd works, you can use these f unctio ns to get detailed inf ormation about the wireless connection you’re using. 2-4-1 Network S tatistics Please follow[...]

- 35 - All connection-related st atistics is displayed here. Y ou c an click ‘Reset Counter ’ to reset the st atistics of all items back to 0. Click ‘OK’ to close the window . 2-4-2 Link S tatus Please follow the following instructions to chec k network stati stics: 1. Right-click the Edimax configuration utility icon locate d at lower-ri g[...]

- 36 - These information display ed here are up dated every second, and here are descriptions of every item: S tatus Displays the SSID and BSSID of connected wireless access point or wireless device (displayed as SSID <-> BSSID as s h own in above picture. If there’s no active connection currently , ‘Di sconnected’ will be displayed her[...]

- 37 - 2-5 Advanced Settings This wireless network card provides several advan ced settings for experienced wireless use rs. Y ou can change these settings to increase dat a trans fer performance, or change operation mode. Please follow the following instructions to set advanced wirele ss settings: 1. Right-click the Edimax configuration utility ic[...]

- 38 - Here are descriptions of every setup items: Wireless mode Select wireless operation mode, available options are 802.1 1 B/G mix, 802.1 1 B only , and 802.1 1 B/G/N mix. Y ou can select 802.1 1 B/G/N mix to maximize wireless compatibility with wirele ss access point s and other wireless de vices. Anyway , you can set this setting to ‘802.1 [...]

- 39 - Show When your computer is being authe nticated by Authentication wireless authentication serve r , a dialog window S tatus Dialog with the process of authentication will appear . This function is helpf ul to find out the problem when you can not be authenti cated, and you can provide this information to authenticatio n server ’s adm inist[...]

- 40 - 2-6 QoS Setting This wireless network card provides QoS (Quality of Se rvice) function, which can improve the performance of certain netwo rk applications, like audio / video stream ing, network t elephony (V oIP), and others. When you enable WMM (Wi-Fi MultiMedia) function of this net work card, you can define the priority of different kind[...]

- 41 - Here are descriptions of every setup items: WMM Enable Check this box to enable WMM function. Please click ‘Apply’ button on the right of this check box af ter you check or un check this box, so corre sponding settings in this window will be activated or deactivated respectively . WMM - Power Enable WMM power saving mode to save en ergy [...]

- 42 - 2-7 WPS Configuration Note: This function support s Window s XP/XP64 Operation System only . Wi-Fi Protected Setup (WPS) is the latest wireless ne twork t echnology , which makes wi reless net work setup become very simple. If you have WPS-enabled wireless acce ss point, and you want to est ablish a secure connection to it, you don’t have [...]

- 43 - 2-7-1 WPS Setup - PBC (Push-Button Configuration) 1. Right-click the Edimax conf iguration utility icon located at lower-right corne r of computer desktop, then click ‘Launch Config Utilities’. 2. Click ‘WPS Configuration’ tab, and the following settings will appear:[...]

- 44 - 3. Push the ‘WPS’ button on your wireless acce ss point (the button used to activate WPS st andby mode may have another name), or use other way to start WPS st andby mode as the in struction given by your wireless access point’ s user manual. 4. Before you start to establish the wirel ess conne ction by using WPS, you c an click ‘Res[...]

- 45 - 5. Click ‘PBC’ button now to start to establish wire less conn ection by WPS, and please be p atient (This may require several seconds to one minute to complete). Wh en you see ‘WPS st atus is connected su ccessfully’ message, means the conn ection between your wireless network card and access point is su ccessfully connected by WPS,[...]

- 46 - 2-7-2 WPS Setup - PIN If the wireless access point you wish to connect support s PIN, please follow the following instructions to establish con nection to it: 1. Right-click the Edimax configuration utility icon loca ted at lower-ri ght corner of computer desktop, then click ‘Launch Config Utilities’. 2. Click ‘WPS Configuration’ tab[...]

- 47 - The PIN number of your wirele ss network card i s an ei ght-digit number located at the upper-right position of configuration utility . Remember it, and input the number to your wireless access point as the WPS PIN code (Please refer to the user manual of your wirel ess access point for instructions about how to do this). 3. Click ‘PIN’ [...]

- 48 - 2-8 About The ‘About’ t ab provides you the information ab out version numbers of configuration utility , firmware, and other important information a bout your wireless network card . Please follow the following instructions to see these i nformation: 1. Right-click the Edimax configuration utility icon locate d at lower-ri ght corner of[...]

- 49 - If you need assista nce about network problem, you’ll need these value s. Y ou can also click ‘WWW .EDIMAX.COM’ button to go to the web site of network card driver ma nufacturer and get more information about your wireless network card. Please click ‘OK’ to close configuration utility .[...]

- 50 - CHAPTER III: APPENDIX 3-1 Hardware S pecification Standards: IEEE 802.11b/g/Draft-N Interface: USB 2.0 (USB 1.1 Compatible) Frequency Band: 2.4000 ~ 2.4835G Hz (I ndustrial Scientific Medical Band) Data Rate: 11b: 1/2/5.5/11Mbps 11g: 6/9/12/24/36/48/54Mbps 11n (20MHz): MCS0-15, 32 with Half G uard Interval Suppo rt (up to 144Mbps) 11n (40MHz[...]

- 51 - 3-2 T roubleshoot ing If you encounter any problem when you’re usin g this wireless network card, don’t pani c! Before you call your dealer of purchase for help, please check this troubleshooting t able, the solution of your problem could be very simple, and you can solve the problem b y yourself! Scenario Solution I can’t find any wir[...]

- 52 - add the MAC address of your netwo rk card to his / her access point’s list. The network is slow / having problem when transferring large files 1. Move closer to the place where access point is lo cated. 2. Enable ‘Wireless Protection’ in ‘Advanced’ t ab. 3. T ry a lower TX Rate in ‘Advanced’ tab. 4. Disable ‘Tx Burst’ in ?[...]

- 53 - 3-3 Glossary 1. What is the IEEE 802.1 1g standar d? 802.1 1g is the new IEEE standard for high-speed wireless LAN communica tions that provides for up to 54 Mbps dat a rate in the 2.4 GHz band. 802.1 1g is quickly becoming the next mainstream wire less LAN technology for the home, of fice and public networks. 802.1 1g defines the use of the[...]

- 54 - 7. What is WEP? WEP is Wire d Equivalent Privacy , a data privacy mechanism based on a 40 bit shared key algorithm, as described in the IEEE 802 .1 1 standard. 8. What is TKIP? TKIP is a quick-fix method t o quickly overcome the inherent weaknesses in WEP security , especially the reuse of encryption keys. TKIP is involved in the IEEE 802.1 [...]

- 55 - 14. What is WMM? Wi-Fi Multimedia (WMM), a grou p of features for wi rel ess networks that improv e t he user experience for audio, video and voice applications. WMM is based on a subset of the IEEE 802.1 1e WLAN QoS draf t standard. WMM adds prio ritized cap abilities to Wi -Fi networks and optimizes their performance when multiple concurri[...]

- 56 - 3-4 FCC and Other Compliance S t atement s Federal Communication Commission Interference S t atement This equipment has been tested a nd found to comply with the limits for a Cla ss B digit al device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential ins[...]

- 57 - Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radia tion exposure se t forth for an uncontrolled environme nt. In order to avoid the possibility of exceeding the FCC radio frequency exposure lim it s, human proximity to the antenna shall not be less than 20cm (8 inches) during no rmal op[...]