Cannon DIGI-TROLL 5 manual

Owner’s Manual DIGI- TROLL 5 DIGI- TROLL 5 TS Owner’s Manual[...]

2 www.cannondownriggers.com Table of Contents T ABLE OF CONTENTS Introduction .................................................................................................................................................................. 3 Warranty / Servic e Information ...........................................................................[...]

3 www.cannondownriggers.com Introduction Introduction Overvie w Thank you for purchasing the Canno n Digi-Troll 5 electric downrigg er. We have designed your new down- rigger to be an accurate and reliable tool that will enha nce fishing control and improve your ability to catch fish. This manual covers installation and the functions of both the Di[...]

4 www.cannondownriggers.com Product Warranty CANNON LIMITED W ARRANTY Johnson Outdoors Marine Electronics, Inc. warrants to the original purchaser that if the accompanyi ng product (see exclusions below) proves to be defective in material or workmanship within the following warranty periods, Johnson Outdoors Marine Electronics, Inc. will, at its op[...]

5 www.cannondownriggers.com Product Overview Introduction to Controlled Dep th Fish ing Undoubtedly there are many fishermen familiar with the methods and use of controlled depth fishi ng. During the mid 1960's the state of Michi gan intro- duced Pacific salmon into the Great Lakes in an at- tempt to revitalize its sport fishing industry. From[...]

6 www.cannondownriggers.com Installation Downrigger Mounting on Boats A downrigger should be mounted wherever it is easy to operate and observ e. You want to be able to see your fishing rod and to react quickly. So, choosing a good location t o mount your downrigger on your boat is very important. Due to the great variety of boats available, mounti[...]

7 www.cannondownriggers.com Installation Decks thinner than 1/4" Use a Cannon deck plate (PN 2200693) to prevent deflection and add stability to decks thinner than 1/4". Use the deck plate as a template to mark the hole locations. If access to the undersi de of the deck is not available, the deck plate can be mounted using scre ws and wel[...]

8 www.cannondownriggers.com INSTALLING THE BOOM AN D B ALL HOOK 1) Remove the ball hook collar, ball hoo k, and 1/4 -20 nut from the included hardware bag assembly. 2) Thread the nut onto the ball hook, then thread the ball hook into the ball hook collar. Do not tighten yet. (Figure 1) 3) Slide ball hook collar ont o the end of the boom a nd leave [...]

9 www.cannondownriggers.com FIGURE 5 FIGURE 6 FIGURE 7 FIGURE 8 6) Insert the 1/4-20 nylon locknut into the hex pocket on the nose of the frame (motor side of frame). (Figure 5) 7) Insert 1/4-20 x 2” bolt into reel side of frame nose. With a Phillips head screw driver, thread bolt into the nylon locknut from step 6. Tighten bolt until the end of [...]

10 www.cannondownriggers.com BOOM END PULLEY Telescopic Boom 1) Remove boom end assembly from hard wa re bag. 2) Remove #8 self tapping screw from h ard ware bag. 3) Insert boom end post into end of the small tube of the telescopic boom assembly. (Figure 9) 4) Align hole in boom post with hole in small end tube. (Figure 10) 5) Secure boom end with [...]

11 www.cannondownriggers.com REMOVABLE SPOOL COVER Your new downrigger com es with a removable spool cover. By removing this cover, you are able to gain easy access to your spooled cable and easy sp ool removal. This feature allows you to easily access tangled line, get it repaired and get you back into ac- tion quickly. This feature also allows yo[...]

12 www.cannondownriggers.com Installation ATTACHING THE RO D H OLDER(S) The locking rod holder(s) incorporate a l ocking tooth design which can be easily adju sted every 15° with the soft grip knob. The symmetrical design will allow mounting of the rod holder on either sid e of the down rig- ger or two rod holders at the same time. The unique two [...]

13 www.cannondownriggers.com Installation TERMINA TING THE DOWNRIGGER CABLE TIP: Use only straight cable whe n routing through the terminator. Worn or kin ked cable can be stressed and may break prematurely when retri eving trolling weights. A TT ACHING THE LINE RE LEASE (UNI-RELEASE) The Cannon Uni-Release attache s directly to the downrigger weig[...]

14 www.cannondownriggers.com USING YOUR DIGI-TROLL WITH T HE INTELLITRO LL ACCESSORY Both the Digi-Troll 5 and Digi-Troll 10 are comp atible with the IntelliTroll accessory. The Digi-Troll 5 receives the IntelliTroll data and sends it to your Humminbird fishfinder (using the Ca nno nlink accessory). You can also use the Intellitroll monitor and ant[...]

15 www.cannondownriggers.com USING THE INCLUDED POWE R LOSS MANUAL CRANK HANDLE In case of a dead battery, your downrigger come s equipped with a power loss manual cra nk handle. This handle allows for the retrieval of your weight should you lose power or have an electrical failure. To utilize the handle follow the below steps. WARNING: LOOSENING O[...]

16 www.cannondownriggers.com Installation Wiring Y our Downrigger Your Boat's Electrical Condition It is important to make sure that your boat is properly set up before installing your Digi-Troll with Positive Ion Control (PIC). Whenever a boat is in water, various subm erged parts interact to create wea k electrical currents. These weak elect[...]

17 www.cannondownriggers.com Installation FUSE / BREAKER SPECIFICATIONS: An over-current protection device (circuit breake r or fuse ) must be used with this downrigger. Coast Guard require- ments dictate that each ungrounde d cu rrent-carrying conductor mu st be prot ecte d by a manually reset, trip-free circuit breaker or fuse. The following brea[...]

18 www.cannondownriggers.com GETTING ST ARTED Operating the Digi-Troll 5 The Digi-troll 5 offers you the most adva n ced feature s available in a downrigger. • Variable Positive Ion Control. • Large LCD digital displ ay for weight depth and easy programmi ng. • Networking operation allo wing you to chain several Digi-Troll 5 s together for us[...]

19 www.cannondownriggers.com Getting Started Digi-Troll 5 Keypad The Digi-Troll 5's keypad has six keys lo cated below the display. Power The ON/OFF key functions: 1) Turn the Digi-Troll ON - Simply press and rel ease. 2) Turn the Digi-Troll OFF - Press and hold power b utton for three seconds. MENU The Menu moves the display through up to fou[...]

20 www.cannondownriggers.com Programming the Digi-Troll 5 The Digi-Troll 5 contain s fo ur men us that enable you to program and customize its ope ration. Any changes made using the menu system are automatical ly saved in permanent memory when the downrig ger is turned off. NOTE: The downrigger must be turn ed o ff with the power button for the set[...]

21 www.cannondownriggers.com Getting Started Positive Ion Control Menu This menu lets you control the PIC level from 0.2 vdc to 1.2 vdc. Press the Menu one (1) time from the depth sc reen or on ce from the up/down screen. Line On Reel Menu This menu lets you set the amount of lin e on the reel. Increments are in 50 ft. This setting is important in [...]

22 www.cannondownriggers.com Un/Coated Menu This menu lets you switch between Can non coated and uncoated cable. This setting is important as well in deter- mining accurate line out. Press the Menu (4) four times from the dept h screen or once form the Units screen. Getting Started Digi-Troll Factory Settings Your Digi-Troll 5 was ship ped with the[...]

23 www.cannondownriggers.com Getting Started Networking your Digi-Trolls Up to six Digi-Troll series down rigg ers can be networked to gether with the Cannonlink accessory. To network you r downriggers you will need the Relay Cable Accesso ry (019634) between each downrigger y ou wo uld like to link. The Cannonlink cable will install to the Data In[...]

24 www.cannondownriggers.com Fishing With Your Downrigger After programming your Di gi-Troll, rele ase some line from your rod and reel so that the lure is anywhere from 5 to 100 feet behind the boat. This is called drop ba ck. Attach the fishing line firmly into the line release. Press and hold the down key to lower the weight to the desired depth[...]

25 www.cannondownriggers.com How the Positive Ion Control Sy stem Works The PIC system uses an internal circuit that passes the voltage through the drive train of the Digi-Troll to the shaft. The shaft contacts the cable by means of a ball bearing, spring and, lastly, a one direction button hea d screw. Care must be take n to ensure contact between[...]

26 www.cannondownriggers.com Blowback Simply stated, blowback is what happe n s to the downrigger weight when you pull it through the water behind your boat. As your speed increases, so doe s the horizontal distance betwee n the weig ht and your downrigger. The faster you go, the farther the weight is behind you. The farther the weight is behind yo[...]

27 www.cannondownriggers.com Ten Good Trolling Tips 1) Test your lures over the boat side before sending them down and back. Do this to make sure the lure wig- gles and wobbles properly without goi ng belly up or wandering off. Some lures can be adjusted, fine tuned actually, to impart maximum action. For example, a slight bend in the tail of a spo[...]

28 www.cannondownriggers.com Troubleshooting PROBLEM: In the UP or AUTO-UP mode the downrigge r stops periodically but the display stays on or the circuit breaker trips repeatedly. SOLUTION: • Low battery. The battery voltage at the power cord is less than 11.5 volts (measure with a volt meter while the downrigger is pulling up the we ight). • [...]

29 www.cannondownriggers.com THIS P AGE INTENTIONALL Y LEFT BLANK[...]

30 www.cannondownriggers.com Parts List 1902315 Digi-Troll 5[...]

31 www.cannondownriggers.com Parts List 1902315 Digi-Troll 5 In the U.S.A., replacement parts may be ordered directly from CANNON Parts Dept., 121 Power Drive, Mankato, Minnesota 56001. B e sure to provide the MODEL and SERIAL numbers of your downrigger when orderin g parts. Please use t he correct part numbers from the parts list. Payment for any [...]

32 www.cannondownriggers.com Parts List 1902320 Digi-Troll 5 TS[...]

33 www.cannondownriggers.com Parts List 1902320 Digi-Troll 5 TS In the U.S.A., replacement parts may be ordered directly from CANNON Parts Dept., 121 Power Drive, Mankato, Minnesota 56001. B e sure to provide the MODEL and SERIAL numbers of your downrigger when orderin g parts. Please use t he correct part numbers from the parts list. Payment for a[...]

34 www.cannondownriggers.com Wiring Diagram Digi-Troll 5 Series Wiring Diagram[...]

35 www.cannondownriggers.com NOTES: __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ _____________[...]

www.cannondownriggers.com ENVIRONMENTAL COMPLIANCE STA TEMENT: It is the intention of Johnson Outdoors Mari ne Electronics, Inc. to be a responsible corporate citizen, operating in compliance with known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our products. WEEE Directive: EU Directive 2[...]