AEG SCS51400S0 manual

SCS51400S0 EN FRIDGE-FREEZER USER MANUAL[...]

FOR PERFECT RE SULTS Thank you for choosing th is AEG product. We have created it to give you impeccable performance for many years, with innovative techno logies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minute s reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AE[...]

CONTENTS 4 Safety information 6 Operation 7F i r s t u s e 8D a i l y u s e 9 Helpful hints and tips 11 Care and cleaning 13 What to do if… 15 Technical data 15 Installation 22 Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging t[...]

SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistak es and accidents, it is importan t to ensure tha t all people using the appliance are thoroughly familiar with it s operation[...]

• It is dang erous to alter the specifications or modify this product in any way. Any dam - age to the cord may cause a short-ci rcuit, fire and/or electric sh ock. WARNING! Any electrical component (power cord, plug, co mpressor) must be replaced by a certified service agent or qualified service personnel. 1. Power cor d must not be lengthe ned.[...]

• Regularly examine the drain in the refrigerat or for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance. Installation For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there ar e damages on it. Do[...]

Temperat ure regulati on The temperature is automatically regulated. To operate the appliance, proc eed as follows: • turn the Temperature regulator t oward lower settings to obtain the minimum coldness. • turn the Temperature regulator toward higher settings to obtain the maximum coldness . A medium setting is generally the most suitable. Howe[...]

DAILY USE Freezing fresh food The freezer compartment is suitable for freezin g fresh food and storing frozen and deep- frozen food for a long time. To freeze fresh foods it is not necessary to chan ge the medium setting. However, for a faster freezing operation, tu rn the temperature re gulator toward high er settings to obtain the maximum coldnes[...]

Do not use metallic instruments to remove the trays from the freezer. Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can b e posi - tioned as desired. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. Positio[...]

• If the ambient temperature is high and the Temper ature Regulator is set to low tem - perature and the appliance is fully loaded , the compress or may run continuously, caus - ing frost or ice on the evaporator . If th is happens, set the Temperature Regu lator to - ward warmer settings to allow automa tic defr osting and so a saving in electri[...]

Hints for storage of frozen food To obtain the best performance fr om this appliance, you should: • make sure that the commercially frozen food stuffs were adequately stored by the re - tailer; • be sure that frozen foodstu ffs are transferred from the f oodstore to the freezer in the shortest possible time; • not open the door frequently or [...]

It is important to periodically clean the defrost water drain hole in the middle of the refrigera - tor compartment channel to pr event the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole. Defrosting the freezer A certain amount of frost will always form[...]

Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artifi cial means to spe ed up the thawing process other than those recommen ded by the manufacture r. A temperature rise of the frozen food packs, du ring defrosting, may shor ten their safe storage life. Periods of non[...]

Problem Possible cause Solution The product temperature is too high. Let the product temperature de - crease to room temperature b e - fore storage. The room temperature is too high. Decrease the room temperature. Water flows on the rear plate of the refrigerator. During the automatic defrost - ing process, frost defrosts on the rear plate. This is[...]

3. Remove the lamp cover (refer to the il - lustrati on). 4. Replace the used lamp with a new lamp of the same power and specifically de - signed for household appliances. (the maximum power is shown on the lamp cover). 5. Install the lamp cover. 6. Tighten the screw to the lamp cover. 7. Connect the mains plug to the mains socket. 8. Open the door[...]

Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate cor - respond to your do mestic power supply. The appliance must be earthed. The power su pply cable plug is provided with a con[...]

4. Loos en the middle h inge. 5. Remove the lower door. 6. Loosen and remove the lo wer pin. On the opposite side: 1. Tighten the lower pin. 2. Install the lower door. 3. Tighten the middle hinge. 4. Install the spacer. 5. Install the upper door. 6. Tighten the upper pin. Ventilation requirements The airflow behi nd the appliance must be suffi - ci[...]

1. Install the appliance in the niche. Push the appliance in the direction of the arrow (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the appliance and the cupboard front- edge is 44 mm. Push the appliance in the direction of the arrow (2) against the cupboard on the opposite side of the hing[...]

4. Apply the adhesive sealing str ip to the appliance as shown in figure. 5. Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case. 6. Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B). Attach the hinge covers (E) to the hinge. B E E D C[...]

7. Disconnect the parts Ha, Hb, Hc and Hd 8. Install the part Ha on the inner side of the kitchen furniture. 9. Push the part Hc on the part Ha. ca. 50 mm ca. 50 mm 21 mm 90° 90° 21 mm Ha Hc 20 Installation[...]

10. Open the appliance door and the kitch - en furnitur e door at an angle of 90°. Insert the small squa re (Hb) into guide (Ha). Put together the appliance do or and the furniture door and mark the holes. 11. Remove the brackets and mark a dis - tance of 8 mm from the outer edge of the door where the nail must be fitted (K). 12. Place the small s[...]

13. Press the part Hd on the part Hb. Do a final check to make sure that: • All screws are ti ghtened. • The sealing strip is attached tightly to the cabinet. • The door opens and closes corr ectly. ENVIRONMENTAL CONCERNS The sym bol on the product or on its packaging indicates that this product may not be treated as household waste. Instead [...]

23[...]

www.aeg-electrolux.com/shop 212720 331-00-21052010[...]