Dell T7600 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Dell T7600, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Dell T7600 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Dell T7600. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Dell T7600 should contain:
- informations concerning technical data of Dell T7600
- name of the manufacturer and a year of construction of the Dell T7600 item
- rules of operation, control and maintenance of the Dell T7600 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Dell T7600 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Dell T7600, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Dell service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Dell T7600.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Dell T7600 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Dell Precision Workstation T7600 Owner's Manual Regulatory Model: D02X Regulatory Type: D02X001[...]

  • Page 2

    Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc[...]

  • Page 3

    Contents Notes, Cautions, and Warnings ...................................................................................................2 1 Working on Your Computer .......................................................................................................7 Before Working Inside Your Computer ..........................................[...]

  • Page 4

    Removing the Front I/O Panel and the USB 3.0 Ports ............................................................................................. 29 Installing the Front I/O Panel and the USB 3.0 Ports .............................................................................................. 31 Removing the Power Switch .........................[...]

  • Page 5

    Error Messages ...................................................................................................................................................... 62 Errors That Halt Your Computer Completely .................................................................................................... 62 Errors That Do Not Halt Your Comput[...]

  • Page 6

    6[...]

  • Page 7

    1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: • You have read the safety information that[...]

  • Page 8

    CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components. Turning Off Your Computer CAUTION: To avoid losing data, s[...]

  • Page 9

    2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • Phillips screwdriver • Small plastic scribe Removing the Power Supply Unit (PSU) 1. F[...]

  • Page 10

    Removing the Front Cover NOTE: The front cover can be secured using the front panel-chassis lock. For more information the front-panel chassis lock, see Additional Information — Front Panel Chassis Lock. 1. Follow the procedures in Before Working Inside Your Computer . 2. Press down on the front cover release latch. 3. Keep the latch pushed down,[...]

  • Page 11

    Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the front cover. 3. Pull the clasp of the hard-drive bracket in an outward direction. 4. Slide the hard-drive bracket in an outward direction to remove it from the computer. 5. If a second hard drive is installed, Pull the clasp of the second hard dr[...]

  • Page 12

    6. Slide the second hard-drive bracket in an outward direction to remove it from the computer. 7. Flex the hard-drive bracket on both sides to loosen the hard drive. 8. Lift the hard drive in an upward direction to remove it from the hard drive bracket. 12[...]

  • Page 13

    9. If a 2.5 inch hard drive is installed , Push the retention clips in an outward direction and lift up the drive to remove it from the 3.5 inch hard-drive caddy. Installing the Hard Drive 1. Flex the hard drive-bracket and then insert the hard drive into the bracket. 2. Slide the hard-drive bracket into its compartment and close the hard-drive bra[...]

  • Page 14

    3. Lift the cover upward to a 45–degree angle and remove it from the computer. Installing the Left Cover 1. Place the computer cover on the chassis. 2. Press down on the cover till it clicks into place. 3. Follow the procedures in After Working Inside Your Computer . Removing the Intrusion Switch 1. Follow the procedures in Before Working Inside [...]

  • Page 15

    4. Push the intrusion switch downwards and remove it from the computer. Installing the Intrusion Switch 1. Install the intrusion switch into its place holder on the chassis. 2. Route the intrusion switch cable around the chassis clips and install the connector to the system board. 3. Install the left cover. 4. Follow the procedures in After Working[...]

  • Page 16

    4. Press down the latch and pull the PCI card away from the computer. Installing the PCI Card 1. Push the expansion card into the card slot and secure the latch. 2. Install the plastic latch that secures the PCI card to the card slot. 3. Install the left cover. 4. Follow the procedures in After Working Inside Your Computer . Removing the 2.5-inch O[...]

  • Page 17

    4. Disconnect the power cable from the back of the optical drive. 5. Press down on the blue release tab to release the latches that secure the optical drive. 17[...]

  • Page 18

    6. Slide the optical drive out of its compartment and lift it up to remove it from the computer. 7. Flex the optical drive bracket latches in an outward direction to loosen the optical drive from the bracket. 8. Lift the optical drive and remove it from the bracket. 18[...]

  • Page 19

    Installing the 2.5-inch Optical Drive 1. Slide the optical drive into its compartment and ensure it is seated firmly. 2. Connect the power cable and the data cable to the back of the optical drive. 3. Install the left cover. 4. Follow the procedures in After Working Inside Your Computer . Removing the Air Tunnel NOTE: The air tunnel is an optional [...]

  • Page 20

    5. Press down on the release latch on the air tunnel base and lift it upwards to remove it from the computer. 6. Repeat the steps to remove the second air tunnel module from the computer. Installing the Air Tunnel NOTE: The air tunnel is an optional component and your computer may not ship with it. 1. Install the air tunnel base on the computer cha[...]

  • Page 21

    Removing the Processor/Memory's Slot Cover NOTE: The cover is an optional component and it covers the additional processor and the memory slots. Your computer may not be shipped with the cover. 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the left cover 3. Release the retention latches that secure the processor/m[...]

  • Page 22

    3. Press down on the memory-securing clips on each side of the memory module, and lift the memory module upwards to remove it from the computer. Installing the Memory 1. Insert the memory module into the memory socket. 2. Press down on the memory module until the securing clips secure the memory in place. 3. Install the left cover. 4. Follow the pr[...]

  • Page 23

    4. Remove the captive screws that secure the heat sink. 5. Lift up the heat sink and remove it from the computer. 23[...]

  • Page 24

    Installing the Heat Sink 1. Place the heat sink inside the computer. 2. Tighten the captive screws to secure the heat sink to the system board. 3. Connect the heat-sink cable to the system board. 4. Install the left cover. 5. Follow the procedures in After Working Inside Your Computer . Removing the Heat-Sink Fan 1. Follow the procedures in Before [...]

  • Page 25

    Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a) left cover b) optical drive 3. Remove the screws that secure the optical-drive bracket. 4. Push the air duct in the direction indicated to unhinge it from the system fan module. 5. Lift the air duct in an upward direction to remove it from the co[...]

  • Page 26

    6. Slide the second air duct in the direction of the system fan to loosen it from its retention clasps. 7. Pull the second air duct in the direction opposite to the system fan module. 8. Lift the second air duct in an upwards direction to remove it from the computer. 26[...]

  • Page 27

    9. Route the system fan cable through the opening in the system fan module. 10. Disconnect the system fan cable connectors from the system board. 11. Remove the screws that secure the system fan module to the chassis. 27[...]

  • Page 28

    12. Disconnect the system-fan cable from the system fan module and remove the system fan module from the computer. 13. Remove the rubber tabs that secure the system fan , lift up the fan and remove it from the fan assembly. Installing the System Fan 1. Tighten the rubber tabs that secure the system fan to the system fan module. 2. Connect the syste[...]

  • Page 29

    4. Connect the system fan cables to their connectors on the system board. 5. Route the system fan cables out of the opening in the system fan module in the direction of the system board. 6. Slide the larger air duct downwards into the retention tabs until it is secured to the system fan module. 7. Slide the smaller air duct downwards into the reten[...]

  • Page 30

    6. Slide the opposite edge of the front I/O panel outward to disengage the I/O module from the chassis. 7. Remove the screws that secure the USB 3.0 module to the front I/O panel and remove it from the computer. 8. Remove the screws that secure the front I/O panel and remove it from the computer. 30[...]

  • Page 31

    Installing the Front I/O Panel and the USB 3.0 Ports 1. Place the USB 3.0 module of the front I/O panel and install the screws to secure it in place. 2. Place the front I/O panel and install the screws to secure it in place. 3. Re-seat the front I/O panel assembly on the chassis and secure it to the chassis clips on both sides. 4. Install the screw[...]

  • Page 32

    Installing the Power Switch 1. Connect the power switch cable to the system board. 2. Route the power switch module through the opening on the front panel. 3. Press the retention tab to secure the power switch in place. 4. Install the front cover. 5. Follow the procedures in After Working Inside Your Computer . Removing the Speaker 1. Follow the pr[...]

  • Page 33

    Installing the Speaker 1. Install the speaker and route the speaker cable through the chassis. 2. Connect the speaker cable to the system board. 3. Install the left cover. 4. Follow the procedures in After Working Inside Your Computer . Removing the Right Cover 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the screws t[...]

  • Page 34

    4. Lift the right cover at a 45–degree and remove it from the computer. Figure 1. Installing the Right Cover 1. Place the front cover on the computer. 2. Install the screws that secure the right cover to the computer. 3. Follow the procedures in After Working Inside Your Computer . Removing the 5.25-inch Optical Drive 1. Follow the procedures in [...]

  • Page 35

    b) front cover 3. Disconnect the data and power cables from the back of the optical drive. 4. Press the release latch (1) and slide the optical drive outward to release it from the drive bay (2). 5. Remove the screws from the optical drive and remove the bracket. Installing the 5.25-inch Optical Drive 1. Place the optical drive on the bracket and t[...]

  • Page 36

    a) front cover b) right cover 5. Follow the procedures in After Working Inside Your Computer . Removing the Thermal Sensor 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a) left cover b) right cover c) air tunnel 3. Disconnect the thermal sensor cable from the system board and unroute it through the chassis clips. 4. U[...]

  • Page 37

    Installing the Thermal Sensor 1. Install the thermal sensor cable on the system board. 2. Route the thermal sensor cable around the computer chassis. 3. Fasten the latch that secures the thermal sensor cable. 4. Install: a) air tunnel b) right cover c) left cover 5. Follow the procedures in After Working Inside Your Computer . Removing the Processo[...]

  • Page 38

    4. Repeat the above steps to remove the second processor (if available) from the computer. To verify if your computer has dual processor slots, see the System Board Components. Installing the Processor 1. Place the processor in its socket. 2. Replace the processor cover. NOTE: The processor cover is secured by two levers. They have icons that indic[...]

  • Page 39

    4. Route the cable from below the computer chassis as indicated. 5. Remove the screws that secure the hard drive fan to the front of the chassis and remove the fan from the computer. 39[...]

  • Page 40

    Installing the Hard Drive Fan 1. Install the screws that secure the hard drive fan to the front of the chassis. 2. Route the hard drive fan cable through the chassis and connect it to its slot on the system board. 3. Install: a) PCI card b) left cover c) right cover 4. Follow the procedures in After Working Inside Your Computer . Removing the Power[...]

  • Page 41

    Installing the Power Supply Unit (PSU) Card 1. Install the screws that secure the PSU card to the chassis. 2. Connect all the cables to the PSU card. 3. Install the right cover. 4. Follow the procedures in After Working Inside Your Computer . Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: [...]

  • Page 42

    4. Remove the screws that secure the system board to the chassis. 5. Lift the system board in an upward direction and remove it from the computer. 42[...]

  • Page 43

    Installing the System Board 1. Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis. 2. Tighten the screws that secure the system board to the chassis. 3. Connect the connectors to the system board. 4. Install the: a) processor b) memory module(s) c) PCI card d) coin-cell battery e) chas[...]

  • Page 44

    1. PCI slot 2. PCIe x16 slot 3. PCIe x16 slot (wired as x4) 4. PCIe x16 slot (accelerated graphics port) 5. PCIe open-ended slot (wired as x4) 6. USB 3.0 front panel connector 7. Intrusion switch connector 8. DIMM slots (available only when optional second processor is installed) 9. Processor 10. Processor fan socket 11. front panel audio connector[...]

  • Page 45

    3 Additional Information This section provides information for the additional features that are part of your computer. Memory Module Guidelines To ensure optimal performance of your computer, observe the following general guidelines when configuring your system memory: • Memory modules of different sizes can be mixed (for example, 2 GB and 4 GB),[...]

  • Page 46

    Power Supply Unit (PSU) Lock The PSU lock prevents the removal of the PSU from the chassis. NOTE: To lock or unlock the PSU, always ensure that the cover of the chassis is removed. For information on removing the left cover, see Removing the left cover. To secure the PSU, remove the screw from the unlock screw location and tighten the screw to the [...]

  • Page 47

    4 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance and power management thresholds • Manage[...]

  • Page 48

    Keys Navigation <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For the standard graphics browser only. <Esc> Moves to the previous page till you view the main scr[...]

  • Page 49

    Table 3. System Configuration Option Description Integrated NIC Allows you to configure the integrated network controller. The options are: • Disabled • Enabled (Default Setting) Integrated NIC 2 Allows you to configure the second integrated network controller. The options are: • Disabled • Enabled (Default Setting) USB Controller Allows yo[...]

  • Page 50

    Option Description SMART (Self Monitoring Analysis and Reporting Technology) specification. • Enable SMART Reporting - This option is disabled by default. PCI Bus Configuration Allows you to configure the PCI buses. The options are: • 64 PCI Buses (Default) Audio Allows you enable or disable the audio feature. Default Setting: Audio is enabled [...]

  • Page 51

    Option Description Hyper-Thread Control Allows you to enable or disable the HyperThreading in the processor. Default Setting: Enabled Cache Prefetch Default Setting: Enable Hardware Prefetch and Adjacent Cache Line Prefetch RMT Default Setting: Enabled Table 5. Virtualization Support Option Description Virtualization This option specifies whether a[...]

  • Page 52

    Option Description Password Change Allows you to enable the disable permission to the System password when the admin password is set. Default Setting: Allow Non-Admin Password Changes is not selected TPM Security Allows you to enable the Trusted Platform Module (TPM) during POST. Default Setting: The option is disabled. CPU XD Support Allows you to[...]

  • Page 53

    Option Description • Disabled (Default Setting) — Does not allow the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN. • LAN Only — Allows the system to be powered on by special LAN signals. This option is Disabled by default. Table 8. Maintenance Option Description Service Tag Display[...]

  • Page 54

    a) Enter the Service Tag or Express Service Code and click Submit . b) Click Submit and proceed to step 5. 4. If you do not have your computer's service tag or express service code, select one of the following: a) Automatically detect my Service Tag for me b) Choose from My Products and Services List c) Choose from a list of all Dell products [...]

  • Page 55

    – Only lower case letters are valid, upper case letters are not allowed. – Only the following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (), (]), (`). Re-enter the system password when prompted. 4. Type the system password that you entered earlier and click OK . 5. Select Setup Password , type your system [...]

  • Page 56

    6. Connect the computer to the electrical outlet and power-on the computer. 7. Power-off the computer and disconnect the power cable from the electrical outlet. 8. Remove the cover. 9. Replace the jumper on the pins. 10. Install the cover. 11. Follow the procedures in After Working Inside Your Computer . 12. Power-on the computer. 13. Go to the sys[...]

  • Page 57

    5 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix the problem yourself, service and support personnel [...]

  • Page 58

    58[...]

  • Page 59

    6 Troubleshooting Your Computer You can troubleshoot your computer using indicators like Diagnostic Lights, Beep Codes, and Error Messages during the operation of the computer. Diagnostic LEDs NOTE: The diagnostic LEDs only serve as an indicator of the progress through the Power-On Self Test (POST) process. These LEDs do not indicate the problem th[...]

  • Page 60

    installed, try moving it to a different DIMM connector and re-start the computer. • If available, install verified working memory of the same type into your computer. A possible graphics card failure has occurred. • Ensure that the display/ monitor is plugged into a discrete graphic card. • Re-seat any installed graphics cards. • If availab[...]

  • Page 61

    computer boots, add the peripheral cards back one by one until you find the bad one. • If the problem persists, the system board / system board component is faulty. A possible system board failure has occurred. • Disconnect all internal and external peripherals, and re- start the computer. If the computer boots, add the peripheral cards back on[...]

  • Page 62

    Error Messages There are three types of BIOS error messages that are displayed depending on the severity of the issue. They are: Errors That Halt Your Computer Completely These error messages will halt the computer requiring you to cycle the system's power. The following table lists the error messages. Table 12. Errors that halt your computer [...]

  • Page 63

    Error Message Alert! Hard Drive fan1 failure. Alert! Hard Drive fan2 failure. Alert! Hard Drive fan3 failure. Alert! CPU 0 fan failure. Alert! CPU 1 fan failure. Alert! Memory related failure detected. Alert! Correctable memory error has been detected in memory slot DIMMx. Warning: Non-optimal memory population detected. For increased memory bandwi[...]

  • Page 64

    64[...]

  • Page 65

    7 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about your computer. Table 15. Processor Feature Specific[...]

  • Page 66

    Feature Specification T3600 2 GB T5600 / T7600 4 GB Maximum memory T3600 64 GB T5600 128 GB T7600 512 GB Table 18. Video Feature Specification Discrete (PCIe 3.0/2.0 x16) T3600 up to 2 full-height, full-length (maximum of 300 W) T5600 up to 2 full-height, full-length (maximum of 300 W) T7600 up to 4 full-height, full length (maximum of 600 W) Table[...]

  • Page 67

    Feature Specification PCI 2.3 (32-bit, 33 MHz): 133 MB/s SAS – 3 Gbps SATA – 1.5 Gbps and 3.0 Gbps USB – 1.2 Mbps Low Speed, 12 Mbps Full Speed, 480 Mbps High Speed, 5 Gbps Super Speed Table 22. Drives Feature Specification T3600 /T5600 Externally accessible: Slimline SATA optical bays one 5.25–inch drive bays one; supports one 5.25–inche[...]

  • Page 68

    Feature Specification Video Video card dependent • DVI connector • DisplayPort • DMS-59 Table 24. Internal Connectors Feature Specification System power one 28–pin connector System fans three four-pin connectors Processor fans T3600 one 5-pin connector T5600/T7600 two 5-pin connectors HDD fans T3600 / T5600 one 5-pin connector T7600 three 5[...]

  • Page 69

    Feature Specification Front panel audio HDA header one 2x5 pin connector HDD Back Panel : SATA T3600 four 7-pin SAS/SATA connectors T5600 one 36-pin mini-SAS connector, four 7-pin SAS/SATA connectors T7600 two 36-pin mini-SAS connectors Power T3600 one 24-pin and one 8-pin connector T5600 one 24-pin and two 8-pin connectors T7600 one 24-pin and one[...]

  • Page 70

    Feature Specification T3600 635 / 425 W (input voltage of 100 VAC – 240 VAC) T5600 825 / 635 W (input voltage of 100 VAC – 240 VAC) T7600 1000 W (input voltage 100 VAC – 107 VAC) 1300 W (input voltage 181 VAC – 240 VAC) 1100 W (input voltage 108 VAC – 180 VAC) Maximum heat dissipation 1300 W 4113.00 BTU/hr 825 W 3086.60 BTU/hr 635 W 2484.[...]

  • Page 71

    Feature Specification Storage –40 °C to 65 °C (–40° F to 149 °F) Relative humidity (maximum) 20% to 80% (noncondensing) Maximum vibration: Operating 5 Hz to 350 Hz at 0.0002 G²/Hz Storage 5 Hz to 500 Hz at 0.001 to 0.01 G²/Hz Maximum shock: Operating 40 G +/- 5% with pulse duration of 2 msec +/- 10% (equivalent to 51 cm/sec [20 in/sec]) S[...]

  • Page 72

    72[...]

  • Page 73

    8 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your are[...]