Go to page of
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of CDA HG6300, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of CDA HG6300 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of CDA HG6300. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of CDA HG6300 should contain:
- informations concerning technical data of CDA HG6300
- name of the manufacturer and a year of construction of the CDA HG6300 item
- rules of operation, control and maintenance of the CDA HG6300 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of CDA HG6300 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of CDA HG6300, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the CDA service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of CDA HG6300.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the CDA HG6300 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.eu hg6300 , hg6310 & hg6320 Gas Hobs Manual for Installation, Use and Maintenance[...]
-
Page 2
2 Important The manufacturer cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that we reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. This appliance is not designed to be used by people (includi[...]
-
Page 3
3 safety (L VD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to EEC/89/109 . IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection [...]
-
Page 4
4 • This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e. g. heating rooms) should be considered incorrect and potentially dangerous. • These instructions are valid only for the countries of destination, the symbols of which appear on the cover and on the appliance.[...]
-
Page 5
5 Using Y our Hob Fig. 1 Gas burners: Gas flow to the burners is controlled by the control knobs (5, 6, 7 and 8 on the diagrams on pages 6 & 7). There are 3 positions shown on the control panel. T urning the control knob to the positions shown below achieves the following: Closed (OFF position) Maximum position: Provides fast boiling function [...]
-
Page 6
6 g hg6300 Fig. 2 hg6310 Fig. 3 3 3 3 3 2 1 4 4 5 6 7 8 5 6 7 8[...]
-
Page 7
7 K ey to Figs 2, 3 & 4 Gas burners: 1. T riple burner 3.5k W 2. R apid burner 3. 0k W 3. Semi-Rapid burner 1. 75k W 4. Auxiliary burner 1. 0k W Control panel: 5. Front left burner control knob 6. Back left burner control knob 7 . Back right burner control knob 8. Front right burner control knob These appliances are class 3 hg6320 Fig. 4 3 1 4 [...]
-
Page 8
8 Igniting the Burners The hob is fitted with a flame failure device. Flame failure devices operate by shutting o the supply of gas to the burner in the event that the flame is extinguished accidentally . T o ignite the burners, follow these instructions: 1. Lightly press the control knob down and turn the knob anticlockwise to the maximum po[...]
-
Page 9
9 Fig. 6 Ecient Use of Y our Hob The hob is equipped with burners of dierent sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate burner depending on the size of the pan. The most ecient use of the hob is shown below , where the pan and burner are correctl[...]
-
Page 10
10 Correct Use of the Optional W ok P an Adaptor (hg6310 & hg6320 only) The wok pan adaptor is a special stand that is designed to be fitted over the triple ring burner to give support to round bottomed woks. When using a wok, always place the wok pan adaptor in position over the pan support on the triple ring burner as shown in Fig.5. IMPORT [...]
-
Page 11
11 Care and Maintenence As the hob has a stainless steel or enamel surface, you should use a nonabrasive cleaner . Any abrasive cleaner (including Cif ) will scratch the surface and could erase the control panel markings. Stainless steel can be eectively cleaned by simply using a dilute solution of water and mild detergent and drying to a shine [...]
-
Page 12
12 T otal rated gas input : 7 .5kW (hg6300) 8. 0kW (hg6310 & hg6320) Mains electrical voltage: 230 – 240V ac, 50Hz T otal rated electrical consumption: <1W If Y our Hob is Not W orking 1. Check that the mains supply has not been switched o . 2. Check that the fuse in the spur has not blown. 3. Ensure that the burner components are not e[...]
-
Page 13
13 Mains Electricity Connection THIS APPLIANCE MUST BE CONNECTED T O THE MAINS SUPPL Y B Y A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSE SPUR OUTLET AND PROTECTED B Y A 3A FUSE. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E. T[...]
-
Page 14
14 Gas Supply R equirements IMPORT ANT : THIS APPLIANCE SHOULD BE FITTED B Y A GAS SAFE REGIS TERED FITTER OR OTHER SUIT ABL Y QU ALIFIED PERSON. • ThisinstallationmustcomplywiththeGasSafety(installationand use) R egulations 1984. • ThisapplianceiscategoryII2H3+andisdesigned[...]
-
Page 15
15 Room V olume (m 3 ) 5 6 to 10 6 to 11 11 or more Air V ent Required (cm 2 ) 100 50 No permanent vent required if a door opens to the outside None required V entilation All rooms require a window or equivalent (e.g. a door) which can be opened. Some rooms require a permanent vent in addition to a win- dow (see below). This unit must not be used i[...]
-
Page 16
16 Natural Gas to LPG Conversion This hob can be converted from natural gas to propane operation at a nominal inlet pressure of 37mbar , or butane operation at a nominal inlet pressure of 28/30mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). Instructions to t replacement injectors: 1. Di[...]
-
Page 17
17 LPG to Natural Gas Conversion This hob can be converted from propane operation at a nominal inlet pressure of 37mbar or butane operation at a nominal inlet pressure of 28/30mbar to natural gas at 20mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). R equired: •7mmAFnutspin[...]
-
Page 18
18 Fitting the Hob Unpacking the hob: T ake care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 150mm away from any adjacent vertical surfaces, e.g. a tall cupboard end panel. This may be reduced to 100mm if the adjacent surface is resistant to [...]
-
Page 19
19 Fig. 11 15mm V entilation slot > 30mm withstanding temperatures 65°C above ambient or greater (typically 80-90°C). • If there is no oven to be built in below the hob it is recommended that, an isolation shelf should be fitted to protect the user from high temperatures. If the hob is to be installed above a working drawer , then a [...]
-
Page 20
20 2. Position the hob seal, as shown in the diagram below (Fig. 14), ensur - ing that the ends meet without overlapping. Do not use silicone type sealant. 3. Secure the hob to the worktop using the fixing brackets and screws supplied, as shown in the following diagram (Fig. 15). R emove any ex cess sealant after tightening the brackets. 400mm 750[...]
-
Page 21
21 NO TES:[...]
-
Page 22
22 NO TES:[...]
-
Page 23
23 E & O E. All instructions, dimensions and illustrations are provided for guidance only . CDA reserve the right to change specifications without prior notice. NO TES:[...]
-
Page 24
Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www. cda.eu © CDA 2014[...]