Vornado commercial fabric steamer manuale d’uso

READ AND SA VE THESE INSTRUCTIONS Commercial Fabric Steamer Owner’ s Guide www .vornadocommercial.com Serial# __________________________ Write number her e for warranty purposes model VS-570[...]

2 Important Instructions ........................................................................ 4 The V ornado Difference ...................................................................... 5 Assembly ............................................................................................. 6 Product Information ............................[...]

3 Y our V ornado VS-570 is built to perform flawlessly , even in the most challenging commercial envir onments. In the unlikely event that you experience an issue, V ornado is committed to getting you up and running as quickly and easily as possible. Register your product online at www .vornadocommercial.com to take advantage of V ornado's pr[...]

4 IMPOR T ANT INSTRUCTIONS READ AND SA VE THESE INSTRUCTIONS WARNING: T o reduce risk of fir e, electrical shock or injury , the follow- ing basic safety precautions should always be followed when using an electrical appliance. WARNING: Befor e plugging unit into electrical outlet, be sure all elec- trical information on the rating label agrees wi[...]

5 • 2 Steam Settings • 5.5' Steam Hose Length • 10' Power Cord Length • Convenient Cord Management • Adjustable 70" Pole Height • Protective Silicone Bumper • Kink Free Cover ed Coil • Easy T o Roll Caster Wheels The V or nado Dif ference Certified Commercial Grade Steam Car e ™ ETL Listed for Commercial Use. Built[...]

Assembly If any parts are missing, contact Consumer Service at 1-888-232-9490. What Y ou Will Need: Pole T op Figure 1 2. Insert Pole B into Pole C and screw together clock- wise to connect. (Figure 2). Pole C Steam Hose 6 Figure 2 B A C Installing the Pole: 1. Push the Pole T op onto Pole B and tighten us- ing the Pole T op Cap (A) (Figure 1). Pol[...]

Installing the Steam Hose 1. Screw Hose Coupling (E) clockwise onto unit steam outlet until tight (Figure 4). Note: If coupling is not tight, water and steam can leak from this opening. 2. Hang the Fabric Nozzle onto the Hanger Ring (F) (Figure 5). 3. Insert Pole C into unit through Coupling (D). Screw Coupling (D) clockwise until Pole C is secured[...]

8 Pr oduct Infor mation Power Switch Silicone Bumper Steam Level Switch 70" Fabric Nozzle Steam Hose Pole T op Cap Hanger Ring Cord Management 1 gal. W ater T ank Casters Adjusting Pole Lock 53"[...]

9 Installing W ater T ank 1. Remove W ater T ank. Remove Water T ank Cap and fill Water T ank with water . Replace Water T ank Cap and reinstall W ater T ank. Using distilled or demineralized water will maximize the life and performance of the unit. CAUTION: Do not allow steamer to run dry . Unit may overheat causing the over -temp fuse to actuate[...]

10 WARNING: When steaming delicate fabrics such as silk or velvet, do not let the Fabric Nozzle touch the fabric directly . 4. Hang Fabric Nozzle in an upright position on the Hanger Ring when not in use and turn Power Switch Off (O). Refer to STORAGE guidelines on page 11 of this manual for proper storage pr oce - dures. How T o Use • Cotton •[...]

11 The cleaning steps below are r equired to maintain maximum perfor - mance of your unit. Cleaning is necessary every 3 to 6 months de - pending on the mineral content of your water . 1. Unplug unit and let unit cool at least 30 minutes. WARNING: Danger of scalding if unit has not cooled for at least 30 min- utes. 2. Remove Steam Hose,Pole and W a[...]

12 4. Pour solution into Steam Outlet. Reinstall Steam Hose and place Fabric Nozzle in sink. Plug in unit, press Power Switch On and set Steam Level to Low and run unit for 5 minutes. WARNING: Do not touch Fabric Nozzle. Hot steam will be emitted during the cleaning process. 5. Power unit Off and unplug. Let cleaning solution sit in unit for 1 hour[...]

13 Power Switch is not illuminated. Press Power Switch and it should illuminate red indicating power is On. Steamer is not plugged in properly . Ensure plug ts firmly into outlet. Breaker or fuse that unit is plugged into is blown. Make sure Commer cial Fabric Steamer is the only appliance plugged into that circuit and r eset breaker or replace[...]

14 Replacement Parts and Accessories Refer to the part numbers below when ordering parts and accessories for your Commercial Fabric Steamer . Replacement Accessories Part Numbers for Fast Reordering at www .vornadocommercial.com Cleaning Crystals (12 pack) A110-006-12 Replacement Parts Available www .vornadocommercial.com or via V ornado Consumer S[...]

15 Replacement Parts and Accessories 3 What is covered Subject to the terms and conditions of this 3-Y ear Limited Commercial W arranty (“W arranty”) as set forth below , V ornado Air , LLC (“V ornado”) warrants to the original commercial pur chaser (“Buyer”) that this VS-570 Commercial Fabric Steamer (the “Product”) is to be fr ee [...]

16 INCIDENT AL, SPECIAL, CONSEQUENTIAL, OR OTHER DAMAGES, EVEN IF VORNADO HAS BEEN ADVISED OF OR COULD REASONABL Y FORESEE THE POSSIBILITY OF SUCH DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR DAMAGE, WHETHER RISING OUT OF BREACH OF WAR - RANTY , BREACH OF CONTRACT OR UNDER ANY OTHER THEORY OF LAW . How do you register the W arranty Bu[...]

17 Notes[...]

[...]

[...]

CL3-0276 R- CL7-0276 R-, V00 Speak your mind www .vornadocommercial.com/r eviews V ornado Air , LLC 415 East 13th Street, Andover , Kansas 67002 888.232.9490 │ www .vornadocommercial.com[...]