Smeg CIR900X manuale d’uso

3 T able of Contents INSTRUCTIONS FOR THE USER : these pro vide recommendations for use, a description of the controls and the correct procedures for cleaning and maintaining th e appliance INSTRUCTIONS FOR THE INST ALLER : these are in tended for the qualified engineer who is to install, commission and test the appl iance 1. PRECAUTIONS FOR USE . [...]

4 Precautions f or Use 1. PRECA UTIONS FOR USE THIS MANU AL IS AN INTEGRAL P AR T OF THE APPLIANCE. T AKE GOOD CARE OF IT AND KEEP IT T O HAND THROUGHOUT THE HOB'S LIFE CYCLE. WE URGE Y OU T O READ THIS MANUA L AND ALL THE INFORMA T ION IT CONT AINS CAREFULL Y BEFORE USIN G THE APPLIANCE. INST ALLA TION MUST BE CARRIED OUT BY QU ALIFIED ST AFF[...]

5 Disposal instructions 2. DISPOSAL INSTRUCTIONS - OUR EN VIRONMENT POLICY Our products are only packaged using non-pollutant, environment-friendly , recyclable materials . We urge you to cooperate by dispos ing of the packaging properly . Contact your local dealer or the competent local organisati ons f or the addresses of collection, recycling an[...]

6 Safety Precautions 3. SAFETY PRECAUTIONS SEE INST ALLA TION INSTR UCTIONS FOR SAFETY REGULA TIONS FOR ELECTRIC OR GAS APPLIANCES AND FOR VENTILA TION FUNCT IONS. IN Y OUR INTEREST AND T O ENSURE Y OUR SAFETY , BY LA W ALL ELECTRIC APPLIANCES MUST ONL Y BE INST ALLED AND SERVICED BY QU ALIFIED ST AFF , IN ACCORD ANCE WITH THE RELEV ANT REGULA TION[...]

7 Instructions f or the User 4. GETTING T O KNO W Y OUR APPLIANCE 5. BEFORE INSTALLATION A uxiliar y Bu rner (A UX) Semi-rapid (SR) bur ne r Rapid Bur ner (R) Ultrarapid Burner (UR3) Nev er l eav e packaging residues unattended in the home. Separate waste packaging materials by type and consign them to the nearest separate disposal centre. The insi[...]

8 Instructions f or the User 6. USING THE HOB 6.1 Gas hob Before lighting the hob burners check that the flame diffuser rings are correctly in place with their respec tive b u rner caps, making sure that the holes A in the flame diffusers are aligned with the plugs and ther mocouples. The optional grid B is f or use with woks. T o prev ent damage t[...]

9 Instructions f or the User 6.2 Practical hints f or using the b urners F or better bur ner efficiency an d to mi nimise gas consumption, use pans with flat, ev en bottoms with lid and of suitable size f or the burner, so that flames do not reach up the sides of the pan (see point "6.3 P an diameters"). Once the contents come to the boil[...]

10 Instructions f or the User 7. CLEANING AND MAINTENANCE NEVER USE A JET OF STEAM FOR CLEANING THE APPLIANCE. Before carrying out any operations, disconnect the appliance from the electricity supply . 7.1 Cleaning s tainless stee l T o keep stainless steel in good condition, it must be cleaned regularly , after each use of the appliance, first all[...]

11 Instructions f or the Installer 8. INST ALLING THE APPLIANCE 8.1 Fitting the ap pliance in the top This appliance is in class 3. The procedures required below must be carried out by a skilled builder and/or joiner . The hob can be installed on various mater ials, including masonr y , metal, solid wood and wood finished with plastic lamina tes, p[...]

12 Instructions f or the Installer The entire surface of the cut (fig. 2). No w place the 7 brackets supplied to secure the top to the suppor ting structure. The figures below show how to use these br acke ts. The L shaped squa re as per B in fig. 2 must be fixed to the sides of the work top. After ha ving fi xed the hob it is necessar y to fix bet[...]

13 Instructions f or the Installer 8.2 Clearance abo ve and around domestic app liances Extract from AS5601 REQUIREMENTS 1 Ov erhead clearances – (Measurement A ) Range hoods and exhaust fans shall be installed in accordan ce with the manufacturer’ s instructions. Howe ver , in no case sha ll the clearance between the highest par t of the hob o[...]

14 Instructions f or the Installer 3 Additional requirements for F reestanding and Elev ated Cooking Appliaces – (Measurements D & E) Where D , the distance from the peripher y of the nearest burner to a horizontal combustible surface is less than 200 mm , then E sha ll be 10 mm or more, or the horizontal surface shall be abo ve the triv et. [...]

15 Instructions f or the Installer 9. GAS CONNECTION This appliance is suitable f or installation with Natural Gas or ULPG (propane). Refer to page 12 f or the rele vant b ur ner pressure and appropriate i njector sizes. When the appliance is to be connected to Natural Gas th en the pressure regul ator supplied must be fitted to the gas inlet. A te[...]

16 Instructions f or the Installer 9.1 Electrical connection Check that the pow er supply voltage and size are as specified on the nameplate bel ow the appliance car ter . The nameplate must ne ver be removed. The appliance must be connected to ear th in compliance with electrical system safety regulations. If a per manent connection is used, t he [...]

17 Instructions f or the Installer 10. AD APTING T O DIFFERENT TYPES OF GAS Before carrying out the operations descr ibed below , disconne ct the appliance from the electr icity supply . The appliance is teste d with natural gas NG (2H) at the pressure of 1.0 kP a. If it is to be used wi th other types of gas, the burner nozzles have to be changed [...]

18 Instructions f or the Installer 10.2 Burner and nozzle c haracteristi cs table Burner ULPG - 2.75 kPa Nominal gas Consumption (MJ/h) Injector (mm) Au x i l i a r y ( 1 ) 3.9 0.54 Semi-rapid (2) 6.3 0.68 Rapid (3) 10.8 0.85 Ultra-rapid (4) 15.0 1.05 Burner NG - 1.0 kPa Nominal gas Consumption (MJ/h) Injector (mm) Au x i l i a r y ( 1 ) 3.9 0.90 S[...]

19 Instructions f or the Installer 11. FINAL OPERATIONS FOR GAS APPLIANCES After making the adjustments descr ibed above , reassemble the appliance, rev ersing the proc edures described in point "10.1 Changing the hob nozzles". After adjusting f or use of a gas other than th e gas used f or testing the appliance, replace the gas setting l[...]

[...]

[...]

914772987/ B[...]