JVC KD-G645 manuale d’uso

ENGLISH For canceling the display demonstration, see page 6. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0502-005A [UT] CD RECEIVER KD-G646/KD-G645 KD-G646/KD-G645 Cover_KD-G646_005A_f.indd 1 Cover_KD-G646_005A_f.indd 1 10/22/07 11:32:21 AM 10/22/07 11:32:21 AM[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; [...]

ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons will work as different function buttons. Ex.: When number button 2 works as MO (monaural) button. To use these buttons for their original functions again after pressing M MODE, wait for 5 seconds without pressin[...]

4 ENGLISH Parts identification Display window Control panel — KD-G646/KD-G645 1 5 (up) / ∞ (down) buttons 2 0 (eject) button 3 (standby/on attenuator) button 4 Control dial 5 Remote sensor DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting). 6 BAND button 7 Loading slot 8 Display window 9 EQ (equalizer) butt[...]

ENGLISH 5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Do not leave the remote controller in a place[...]

6 ENGLISH Basic settings • See also “General settings — PSM” on pages 12 and 13. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK HOUR,” then adjust the hour. Select “CLOCK MIN” (minute), then adjust the minute. 3 Finish the procedure. To check the current clock tim[...]

ENGLISH 7 When an FM stereo broadcast is hard to receive Reception improves, but the stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station [...]

8 ENGLISH Manual presetting Ex.: Storing the FM station of 92.50MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To check the other information while listening to an FM or AM station Frequency = Clock = Station name * = (back to the beginning) * If no title is assigne[...]

9 ENGLISH To fast-forward or reverse the track To go to the next or previous track To go to the next or previous folder (for MP3/WMA) To locate a particular track (for CD) or folder (for MP3/WMA) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use direct folder access on MP3/WMA, it is required that folders are[...]

10 ENGLISH Changing the display information While playing an audio CD or CD Text A = Disc title/performer * 1 = Track title * 1 [ ] = B = (back to the beginning) While playing an MP3/WMA disc or USB device • When “TAG DISPLAY” is set to “TAG ON” (see page 13) A = Album name/performer (folder name * 2 ) [ ] = Track title (file name * 2 ) [[...]

11 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). Indication (For) BAS MID TRE LOUD USER (Flat sound) 00 00 00 OFF ROCK (Rock or disco music) +03 00 +02 OFF CLASSIC (Classical music) +01 00 +03 OFF POPS (Light music) +02 +01 +02 OFF HIP HOP (Funk or rap music) +04 –02 +01 OFF[...]

12 ENGLISH General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table on page 13. 1 2 Select a PSM item. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. Indication, [Range] BASS * 1 , [–06 to +06] Adjust the bass. MIDDLE * 1 (mid-range), [?[...]

13 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : The display demonstration will be activated automatically if no operation is done for about 20 seconds, [6]. : Cancels. CLOCK DISP * 1 Clock display • CLOCK ON • CLOCK OFF : The clock time is shown on the display [...]

14 ENGLISH Other external component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ • You can also select “AUX IN” as the playback source by pressing the SRC (source) button. Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as [...]

15 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Moisture condensation Moisture may condense on the lens inside the unit in the followin[...]

16 ENGLISH • MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When a disc is inserted upside down, “PLEASE” and “EJECT appear alternately on the display. Press 0 to eject the disc. • While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermitte[...]

ENGLISH 17 • This unit cannot play back the following files: – MP3 files encoded in MP3i and MP3 PRO format. – MP3 files encoded in an inappropriate format. – MP3 files encoded with Layer 1/2. – WMA files encoded in lossless, professional, and voice format. – WMA files not based on Windows Media® Audio. – WMA files copy-protected wit[...]

18 ENGLISH • The maximum number of characters for: – Folder names : 25 characters – File names : 25 characters – MP3 Tag : 128 characters – WMA Tag : 64 characters • This unit can recognize a total of 2 500 files, 255 folders (999 files per folder), and of 8 hierarchies. • This unit does not support SD card reader. • This unit canno[...]

ENGLISH 19 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work. Store stations manually. • Static noise while listening to the r[...]

20 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks are not played back in the order you have intended. The playback order is determined when the files are recorded. • The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. • The correct characters ar[...]

ENGLISH 21 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB at 60 Hz Mid-range: ±12 dB[...]

© 2007 Victor Company of Japan, Limited EN, CT 1007DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-G646_005A_f.indd 2 Rear_KD-G646_005A_f.indd 2 10/22/07 11:32:34 AM 10/22/07 11:32:34 AM[...]

1 KD-G646/KD-G645 Installation/Connection Manual 安裝/連接手冊 GET0502-010A [ UT ] 1007DTSMDTJEIN EN, CT ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. 中文 本機僅可使用[...]

2 When installing the unit without using the sleeve / 若不使用外套機殼安裝本機 In a Toyota car for example, first remove the car radio and install the unit in its place. 以豐田牌（ TOYOTA ）汽車為例：首先取出汽車收音機，然後將本機裝入其空出的位置。 When using the optional stay / 若選用支撐架 Note[...]

3 Typical connections / 典型的接線方法 Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. 1 Connect the colored leads of the power cord in the order specified in the illust[...]

4 Connecting the external amplifiers and/or subwoofer / 連接至外部功率放大器和 / 或重低音揚聲器 You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • Disconnect the speakers fro[...]