Fujitsu ScanSnap N1800 manuale d’uso

[...]

2 Content s Introduction ........... ........................................................................ ........................ 3 ■ About This Manual ........ ................................................. ............... .............. ............ 3 ■ Opening Help ......... ................................................. .........[...]

3 Introduction Thank you for purcha sing the Network Scanner ScanSnap N1800. This easy-to-operate networ k scanner is used to scan document s for further use. Trademarks Microsoft, W indows, and Windows Vista are either registered trademarks or trademar ks of Microsoft Corporation in the United States and/or other countries. Adobe, the Adobe logo, [...]

4 ■ Opening Help When the [Help] button is available on the windo w or dialog box that is displa yed during the operation, you can open Help by clicking it. Help provides information about ite ms on the windows and actions to take for the messag es. On the LCD touch panel, is displayed as a Help button. ■ Warning Indication s Used in This Docum[...]

5 T o avoid injuries, do not pla ce the scanner in an area where small children may be able to reach. Before moving the scanner , be sure to disconnect the cables th at are connected to the scanner , and disconnect the powe r cable from the AC outlet. Make sure that the floor is free of any obstructions. Moving the scanner with the cable connecte d[...]

6 ■ Precautions READ ALL OF THIS DOCUMENT AND THE OPERATOR'S GUIDE CAREFULLY BEFORE USING THIS SCANNER. IF THIS SCANNE R IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. Also, keep this document in a safe place so tha t it can be easily referred to during use of this scanner. While all efforts have be en made to[...]

7 z Connect the e quipment into an ou tlet on a circuit different from that to which the rece iver is located. z Consult your d ealer or an exp erienced radio/TV technician FCC warning: Changes or modification s not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Canadian DOC[...]

8 Chapter 1 Before Using the Scanner 1.1 From Arrival through Operation The following shows the flow from scanner arrival through ope ration. This manual provides informa tion about Steps 1 to 5 shown below. For information about Steps 6 to 9, refer to the manuals downloaded in Step 5. 1.2 Checking the Component s Make sure that all items shown bel[...]

9 1.3 Part Names This section explains names of the scanner parts. ■ Front view ■ Rear view ADF paper chute Stacker LCD touch panel Scan button Power button Side guides Top cover r elease catch Top cover Extension Security cable slot Power connect or LAN connector[...]

10 Chapter 2 Setting up the Scanner 2.1 Removing the Protective Packaging The scanner comes with a protective foam sheet and protective card atta ched. Follow the proced ure described below to r emove the prot ective packagin g before using the scanner. 1. Remove the tape and protective foam sh eet that covers the LCD touch panel. 2. Pull the top c[...]

11 Chapter 3 Configuring Scanner Basic Settings When the power button is pressed for the first time after purchase, the window fo r scanner basic settings appear s automatically. The basic settin gs for using the scanner can be configur ed with this process. 1. Press the power button on the sca nner. D The [Language Selection] window appears. If th[...]

12 6. Set the scanner name. On the [Scanner Name] windo w, specify the scanner name and group or doma in for joining the network, and press the [Next] button. 7. Set the region/timezone. On the [Region / Timezone] window, s elect the region/timezone and whether to apply daylight saving time, and press the [Next] button. 8. Set the date and time. On[...]

13 10. Change the admin password. On the [Admin Password] wind ow, specify the administrator password, and pr ess the [Next] button. The default value for the [Cur rent Password] is "password". 11. Set the scanner's IP address. On the [IP Address] windo w, set the scanner's IP address, and press the [Next] button. 12. Set the DN[...]

14 14. Confirm the configured se ttings. On the settings confirma tion window of the installation wizard, conf irm the configured basic settings, an d press the [OK] button. D The wizard finishes and the login window appears. This concludes the scanner basic settings procedure. z Whe n the scanner name or domain name has been changed, the scanner i[...]

15 Chapter 4 Checking the Network Connection This section describes how to check the status of the network connection. The network connection ca n be checked by perfor ming a ping test. 1. Log in to the scanner wit h the user name and password of the administrator. Enter "admin" for [User Name] and the password specified in the basic sett[...]

16 Chapter 5 Downloading the Manual For this scanner, the Operator 's Guide (PDF), which contains information about scan ner settings, administration, and operations, is provide d in addition with this manual. Read it when using the sca nner. Use Adobe Reader (*) to view the Oper ator's Guide. *: Adobe Reader can be downlo aded from the f[...]

17 Appendix A T roubleshooting Network Connection T roubleshooting ■ Checking Basic Network Operation with a Ping T est The network connection may be ch ecked by performing a ping test. For more details on how to perform a ping test, refer to "Chapter 4 Ch ecking the Network Connection" (page 15). Check the ping results, and try the fol[...]

18 ■ Failure to Connec t to a Server Using Its IP Address If a server cannot be conn ected to by using its IP address, or if a scanner does not respond to a ping test by specifying its IP ad dress, try the following: ■ Action Check that the LAN cable is connected to both the scanner and server correctly. If the server is connected using a LAN c[...]

19 ■ Failure to Connect to a Server Using Its Host Name or FQDN If the scanner cannot connect to a ser ver by specifying its host name or FQDN, or if a server does not respond to a ping test by specifying its host name or FQDN, try the following: ■ Action Check if a network connection is possible by trying the same solution for "Failure to[...]

20 ■ Action Set the scanner URL as a trusted site for Internet Explorer. 1. In Internet Explorer, select the [To ols] menu J [Internet Options]. 2. On the [Security] tab, sele ct [Trusted sites] and press the [Sites] button. 3. Enter the URL of the scanner in the [Add this website to the zone] field, and press the [Add] button. ■ Action When co[...]

21 Power T roubleshooting ■ Check item Has the power button been pressed? ■ Action Press the power button. ■ Check item Are the AC cable and AC adapter properly connected to the scanner? ■ Action z Connect the AC cable and the AC adapter properly. z Disconnect AC cable from the scanner to turn off the scanner, and connect the cable again. A[...]

22 Copyright NetAdvantage 2007 Copyright© 2000-2007 Infra gistics, Inc. LEADTOOLS for .NET Copyright © 2005 LEAD T echnologies, Inc. WinPcap3.1 Copyright © 1999 - 2005 NetGroup, Poli tecnico di T orino (Italy). Copyright © 2005 - 2006 CACE T echnologies, Davis (California). All rights reserved. Redistribution and u se in source and bina ry form[...]

23 THE SOFTWARE IS PROVIDED "AS IS" AND DIGIT AL EQUIPMENT CORP . DISCLAIMS ALL W ARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANT IES OF MERCHANT ABILITY AND FITNESS. IN NO EVENT S HALL DIGIT AL EQUIPMENT CORPORA TION BE LIABLE FOR ANY SPECI AL, DIRECT , INDIRECT , OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHA TSOEVER [...]