EverFocus Polestar II ED610 manuale d’uso

1/3” CCD Color Day/Night plus Wide Dynamic Range Outdoor V andal Dome Camera Operation Instructions Model No. ED610 Please read this manual first for correct installation and oper ation. This manual shoul d be retained for future reference. The information in this manu al was current when published. The manufacturer reserves the right to revise a[...]

- 1 - T ABLE OF CONTENTS 1. PRODUCT OVERVIEW ............................................................................................................... 3 1.1 Main Feature s ............................................................................................................................................... 3 1.2 Content List .........[...]

- 2 - 3.4.2 AGC (Auto Gain Control) ............................................................................................................................ 22 3.4.3 SENSE-UP ............................ ................................................................................................................... 22 3.4.4 BLC .............[...]

- 3 - 1. PRODUCT OVER VIEW Amazing color low light sensitivity of .05 lux before the ad ded benef its of d igital sign al processing technology , delivered by a 1/3” Sony Sup er HAD II sen sor , is just the beginning with the new E verFocus ED610. Get color without compromise: 560TVL resolution, your choice o f fu ll motion color or true day/nigh[...]

- 4 - Vi de o T es t Ca bl e x 1 Po we r Ad ap te r Ca bl e x 1 D esi cc an t Pa ck x 1 Fo cu s Ai di ng Le ns C a p ( fo r 9 ~22 m m mo de ls o nl y) x 1 Please Note: If an ite m appears to have been da maged in shipment, replace it properly in its carton and notify t he shipper . If any items are missing, notify your EverFocus Electronics Corp. S[...]

- 5 - 1.3 Specifications Items Parameter Pickup Device 1/3" SONY Super HAD II CCD Video Format NTSC or P AL Scanning System NTSC:525 TVL, 60 fields/sec P AL:625 TVL, 50 fields/sec Picture Elements 768 x 494(NTSC); 752 x 582 (P AL) Horizontal Resolution 560 TVL Sensitivity 0.05Lux/F=1.2(AGC ON); 0.0002Lu x/F=1.2(Sens-up 256x) S/N Ratio Over 52d[...]

- 6 - Ø 5.143mm//0.2” Ø 94.7mm/3.78” 1.4 Dimensions 123mm x 107.8mm ; 4.8” x 4.2”[...]

- 7 - 1.5 Camera Component Descr iption Exterior view Interior view Rotatable cover Outer Cover ring Base OSD joystick Power board[...]

- 8 - (1) 1.6 Front and Back Panel Layout Front Panel Layout: Back Panel Layout: (6) (4) (2) (5) (7) (3)[...]

- 9 - (1) External Light Sensor External Lig ht sensor is used to d etect the lighting level the environment. (The light se nsor is “down” when the internal camera module is properly positioned). (2) Focus Ring T o set the focus, and loosen the fo cus ring knob, and turn the ring toward <F> or <N> as necessary , and re-tighten when [...]

- 10 - 2. INST A LL ATION This chapter will describe, in g eneral terms, how to install the ED610 came ra. STEPS: 2.1. Mounting Camera: 1. Drill the Holes. See 2.1.1 2. Mounting: See 2.1.2 2.2. Adjusting Camera: 1. Ad just the camera position. See 2.2.1 2. Ad justing Zoom and Focus See 2.2.2 3. Camera Setting. See 2.2.3 4. How to close camera cover[...]

- 11 - 2.1.2 Mounting 1. T ake off camera’s cover by rotating the cover counter clockwise. Loose outer cover ring first T ake off camera’ s cover Power/Video Cable Camera base Screw A,B,C Wire outlet hole for Surface mounting[...]

- 12 - 2. Pu ll the cables to be connected to the power and video cables from the ceiling or wall. 3. Fix the camera base to ceiling or wall by using 3 screws a nd washers. The washers are used to create the IP66 seal and must be used. Ceiling Mount: Video output Power input[...]

- 13 - W all Mount: 2.2 Adjusting Camera 2.2.1 Adjusting Ca mera Position Adjust the camera to best angle for viewing. Module can be adjusted up and down When you install on the ceiling, change angle of view by turning these joints.[...]

- 14 - 2.2.2 Adjusting Zoom a nd Focus It is highly recommended to use an E verFocus T est Monito r to set up the camera. Find the Video test connection on the back of the camera module. Connect using the video cable included in the package. 1. Loosen the zoom ring knob, and th en turn the ring towards <W> o r <T> as necessary to obtain[...]

- 15 - Step 2 Open the dome cover and place the Focus aiding lens cap on the lens, making sure that the cap’s notch is resting on the zoom knob. Step 3 With cap on , adjust the focus and zoom rings by loosening the knobs and turning the rings until subject is in focus. Retigh ten the knobs when done. Step 4 When finished adjusting focus and zoom,[...]

- 16 - 2.2.3 Camera Setting 2.2.3.1 OSD User Setup Menu This camera utilizes an On Screen Display (OSD) user setup menu. Please refer to Chapter 3 OSD Menu & Configuration, to get more details about OSD menu usage. 2.2.4 Close the Camera Cover (after installation is complete) The ED610 is specially designed with one inner cover and one outer co[...]

- 17 - Turn the externa l ring 3. If the lens is not aligned with t he window , loosen the outer cover , adjust the inner cover so that the lens aimed exactly at the window . 4. T ighten the outer co ver ring until it is firmly secured. Slightly adjust the cover Correct Wrong ( not aligned)[...]

- 18 - 3. OSD MENU & CONFIGURATION This chapter introduces how to conf igure the camera OSD menu. 3.1 Ac cess the user setup menu screen I. Press inward on the end of the joystick The menu screen will appear on the monitor . II. Navigating with the joystick Angle the joystick  or  to move the cursor u p or down. Angle the joystick  o r[...]

- 19 - 3.2 ED610 Menu T ree[...]

- 20 -[...]

- 21 -[...]

- 22 - 3.3 LENS 1. Whe n the SETUP menu is displayed o n t he screen, please direct the arrow to point to “LENS” by moving the joystick UP and DOWN. 2. Select “RET” to save all settings in the LENS menu and returns to the previous menu. Select “END” to save all the menu settings and exit from the OSD menu. 3.4 EXPOSURE When the SETUP me[...]

- 23 - 3.4.4 BLC Video gain can b e adjusted automatically to correct the exposure of subjects that are in front of a bright light source. 1. Please direct the arrow to point to “BLC” by moving the joystick UP and DOWN. 2. Select the BLC mode by pressing the LEFT or RIGHT button. Then make adjustments as below: GAIN: Select from High, Middle an[...]

- 24 - 3.4.5 HSBLC HSBLC ( Highlight Suppression BLC ) is used to reduce the brightness of light sources in a spe cific area. It is activated only in a low illumination environment to minimize the effects of glare from bright lights such as spotlights, street lights o r headlights in the field of view . Where ‘traditional’ BLC can increase the [...]

- 25 - 3.5 WHITE BALANCE CONTROL The screen color can be adjusted by using the WHITE BALANCE function. 1. Ple ase direct the arrow to point to “WHITE BAL” by moving the joyst ick UP and DOW N. 2. Ple ase select the mode you would like to operate by moving the joystick LEFT or RIGHT . Please select one of the 6 modes below: A TW (Auto T racking [...]

- 26 -  COL OR: The picture is always displayed in color , even at low light levels.  A UTO: The picture switches t o color in a no rmal (bright) e nvironment and switches to B/W when the ambient illumination is low . The switching point is determined by the AGC level. Note: AGC se lection mus t be set as middle or high in order to e mploy th[...]

- 27 - 6) If you would like to cancel the ID e ntered, plea se move th e curso r to “CLR”, pre ss in on the joystick, and all the letters ente red will be deleted. 7) Select “END” and press in on the joystick to complete the ID input. 3.8.2 D-EFFECT 3.8.2.1 FREEZE (Note that pract ical application of this feature requires direct access to t[...]

- 28 - ON:  D-Zoom: Select digital zoom from X1.0 u p to X32. T o control the portion of the magnified image in view (0 is the center of the image):  Pan: Select pan digital zoom from -100 to 100.  Ti lt: S elect tilt digital zoom from -100 to 100.  Return: Select “RET” to save all settings in D-ZOOM menu and returns to the previous[...]

- 29 - 3.8.4 PRIVACY This mode covers the areas you do not want to see on the screen. OFF: Disable the PRIV ACY function. ON:  AREA SELECT : Please select the a rea you wo uld like to hide from the 8 areas in AREA SELECT mode  AREA DISPLA Y : S elect “ON” to use the area selected in the AREA SELECT . Select “OFF” to disable this funct[...]

- 30 - 3.9.2 BLUE Adjust image’s blue level. The available range of level is 0~100. 3.9.3 RED Adjust image’s red level. The available range of level is 0~100. 3.9.4 RETURN Select “RET” to save all settings in ADJUST menu and returns to the previous menu. Select “END” to save all the menu settings and exit from OSD men u. 3.10 RESET 3.10[...]

- 31 - EverFocus Electron ics Corp. Headquarter Office 12F, No.79 Sec.1 Shin- Tai Wu Road, Hsi-Chi, Taipei, Taiw an Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 609,Technology Trade Building. Shangdi Information Industry Base, Haidian District,Beijin g China Tel: +86-10-62971096 Fax: +86-10-62971423 European Office Albert-Einstein-[...]