Clarion Compact Discs manuale d’uso

English 5 XMD3 Handling Compact Discs Use only compact discs bearing the or mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R/CD-RW mode ma y not be usable . Handling • Compared to ordinary music CDs, CD-R and CD-R W discs are both easily aff ected by high temperature and humidity and so[...]

English 6 XMD3 4. NOMENCLA TURE Note: • Be sure to read this chapter ref err ing to the front diagrams of chapter “ 2. CONTROLS ” on page 3 (unfold). Names of the Buttons and their Functions [ PWR ] button • Press the button to turn on the power . Press and hold the button f or 1 second or longer to turn off the power . • Switches the ope[...]

English 7 XMD3 Major Button Operations when External Equipment is Connected to This Unit ● When the CD/MD changer is connected ∗ F or details, see the section “ CD/MD c hang er operations ” . [ SCN ] b utton • P erf or ms scan play f or 10 seconds for each trac k. Disc scan play is perf or med when the button is pressed and held. [ RPT ] [...]

English 8 XMD3 LCD Screen In e xtreme cold, the screen mov ement may slo w down and the screen may darken, b ut this is nor mal. The screen will recov er when it returns to nor mal temperature. Displa y Items Operation status indication • Titles, frequency, PS names, clock, etc. are displays. : Preset channel indication (1 to 6) Disc number indic[...]

English 9 XMD3 ■ XMD3 follo wing operations are enabled b y remote control with the Wired Remote Control Unit MR301RC (sold separ ately). WIRED REMO TE CONTROL UNIT Be careful about adjusting the v olume, as turning on the po wer while the v olume is raised to its maximum ma y harm your hearing. [ SOURCE ] Button T urning on and off the power Pre[...]

English 10 XMD3 6. OPERA TIONS Basic Operations Note: Be sure to read this chapter ref err ing to the front diagrams of chapter “ 2. CONTROLS ” on page 3 (unfold). T urning on/off the power 1. Press the [ PWR ] button. 2. The illumination and displa y on the unit light up. The unit automatically remembers its last operation mode and will automa[...]

English 11 XMD3 Basic Operations Adjusting the subwoof er When you def ault select one of mode (LPF50, LPF80, LPF120) ∗ The f actor y default setting is “ S-V OL 0 ” . (Adjustment range: -6 to +6) 1. Press the [ A-M ] button and select “ S-V OL 0 ” . 2. Press the [ w ] or [ z ] button increases or deceases the subwoof er volume . Press an[...]

English 12 XMD3 Seek tuning 1. Press the [ BAND ] b utton and select the desired band (FM or AM). ∗ If “ MANU ” is lit in the displa y , press and hold the [ BAND ] b utton for 1 second or longer . “ MANU ” in the displa y goes off and seek tuning is now a vailable. 2. Press the [ a ] or [ d ] button to automatically seek a station. When [...]

English 13 XMD3 Preset scan Preset scan receives the stations stored in preset memory in order . This function is useful when searching for a desired station in memor y . 1. Press the [ P/A ] button. 2. When a desired station is tuned in, press the [ P/A ] button again to continue receiving that station. Note: • Be careful not to press and hold t[...]

English 14 XMD3 CD Operations Selecting a track ● T rack-up 1. Press the [ d ] button to mo ve ahead to the beginning of the ne xt track. 2. Each time you press the [ d ] button, the trac k advances ahead to the beginning of the ne xt track. ● T rack-down 1. Press the [ a ] button to mo ve back to the beginning of the current trac k. 2. Press t[...]

English 15 XMD3 Dimmer contr ol Y ou can setting the dimmer control on or off . ∗ The f actor y default setting is “ ON ” . 1. Press and hold the [ T ] button f or 1 second or longer to switch to the adjustment selection displa y . 2. Press the [ a ] or [ d ] b utton to select “ DIMMER ” . 3 . Press the [ w ] or [ z ] button to select “[...]

English 16 XMD3 CD/MD changer functions When an optional CD/MD changer is connected through the CeNET cable , this unit controls all CD/MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press the [ PWR ] button and select the CD(MD) changer mode to star t play . If 2 CD(MD) changers are connected, press the [ PWR ] b[...]

English 17 XMD3 CD/MD Changer Operations 2. T o cancel disc scan play , press the [ SCN ] button again. “ DISC ” and “ SCN ” go off from the displa y and the current track contin- ues to pla y . Repeat play Repeat play contin uously plays the current trac k. This function continues automatically until it is cancelled. 1. Press the [ RPT ] b[...]

English 18 XMD3 Recalling a preset station A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select y our f avorite TV stations and store them in memor y for later recall. 1. Press the [ BAND ] button and select the desired TV band (TV1 or TV2). 2. T o recall a stored TV station, press the desired [ DIRECT ] button to se[...]

English 19 XMD3 8. IN CASE OF DIFFICUL TY Problem Cause Solution P ower does not turn on. (No sound is pro- duced.) Compact disc cannot be loaded. Sound skips or is noisy . Sound is bad directly after power is turned on. Nothing happens when buttons are pressed. displa y is not accurate. Fuse is blo wn. Incorrect wiring. Another compact disc is alr[...]

English 20 XMD3 9. ERR OR DISPLA YS If an error occurs, one of the f ollowing displa ys is display ed. T ake the measures described below to eliminate the problem. If an error display other than the ones described abo ve appears, press the reset b utton. If the problem persists, turn off the power and consult your store of purchase . MD changer CD [...]

English 21 XMD3 FM T uner F requency Range : U .S.A : 87.9 MHz to 107.9 MHz Europe : 87.5 MHz to 108.0 MHz Austr alia : 87.0 MHz to 108.0 MHz Usable Sensitivity : 9 dBf 50dB Quieting Sensitivity : 15 dBf Alternate Channel Selectivity : 70 dB Stereo Separation (1 kHz) : 35 dB F requency Response (±3 dB) : 30 Hz to 15 kHz AM T uner F requency Range [...]

22 XMD3[...]