Singer 2010 Superb manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Singer 2010 Superb. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Singer 2010 Superb ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Singer 2010 Superb décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Singer 2010 Superb devrait contenir:
- informations sur les caractéristiques techniques du dispositif Singer 2010 Superb
- nom du fabricant et année de fabrication Singer 2010 Superb
- instructions d'utilisation, de réglage et d’entretien de l'équipement Singer 2010 Superb
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Singer 2010 Superb ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Singer 2010 Superb et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Singer en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Singer 2010 Superb, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Singer 2010 Superb, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Singer 2010 Superb. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    [...]

  • Page 2

    SYMBOL INSTRUCTIONS Raise needle Raise presser foot Lower presser foot[...]

  • Page 3

    IMPORT ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety should always be followed, including the following: Read all instructions before using this sewing machine. - T o reduce the risk of electrical shock: 1. An appliance should never be left unattended when plugged in. 2. Always unplug this appliance from the electric outl[...]

  • Page 4

    CONTENTS PRINCIP AL P ARTS OF THE MACHINE MACHINE CONTROL BUTT ONS LCD SCREEN P A TTERN CHART ACCESSORIES CONNECTING THE MACHINE T O THE POWER SOURCE WINDING THE BOBBIN INSERTING THE BOBBIN THREADING THE UPPER THREAD USING THE NEEDLE THREADER DRAWING UP THE L OWER THREAD ..................................................1 6 CUTTING THE THREAD TWO -[...]

  • Page 5

    CONTENTS ...........................................................3 5 Using the overcasting foot ........................................................3 5 Using the all purpose foot ........................................................3 5 ....................................................................3 6 ................................[...]

  • Page 6

    1 Operation buttons A Thread cutter Face plate Buttonhole lever Auto needle threader Sewing table and accessory box LCD screen Function buttons Function buttons Speed limiting adjustment lever B B Selection buttons C Bobbin winder spindle Needle plate cover T ension dial P attern plates Hole for second spool pin P ower cord socket Handwheel Main po[...]

  • Page 7

    2 1. Start/stop button 2. Reverse button 3. Auto-lock button 4. Needle up/down position button Press this button to start or stop the machine. Hold down this button to sew stitches in reverse or sew reinforcement stitches at a low speed. Hold down this button to sew locking stitches immediately or at the end of the current patterns and automaticall[...]

  • Page 8

    7. Stitch length adjustment buttons 8. T win needle button 9. Mirror button 10. Elongation button Press this button to adjust the length of the stitch. Press this button to fix the width range when using the twin needle to sew . Press this button to sew a reflection pattern. P attern 28 to 51 can be elongated up to five times its normal length by p[...]

  • Page 9

    4 P attern Sound off LCD SCREEN P attern Alphabet Needle up position Auto-lock Reverse Tension Needle position Stitch length Suggested presser foot and identification letter Twin needle Bobbin winding Buttonhole lever Pattern Sound on Pattern number Tension Stitch width Suggested presser foot and identification letter Mirror Auto-stop Stitch width [...]

  • Page 10

    EDIT M Memory LCD SCREEN 5 Editing patterns Sewing the memorized pattern Amount of elongation Elongation Elongation Edit mode Memory group Number of current unit Total number of unit Pattern to edit M Memory mode[...]

  • Page 11

    6 P A TTERN CHART P atterns Direct Patterns-10 A Group Patterns-100 B Group Patterns-100 28 29 22 21 23 24 25 26 27 20 30 31 32 33 34 36 37 35 38 39 16 18 17 19 00 02 04 05 06 09 10 11 15 12 01 03 07 08 14 13 72 73 74 75 76 77 78 79 61 62 63 64 66 67 68 69 70 71 60 65 50 51 48 47 44 40 43 41 42 49 45 55 56 57 52 53 54 58 59 46 93 94 95 96 97 98 99 [...]

  • Page 12

    7 P A TTERN CHART Alphabets Block style 72 73 74 75 76 77 78 79 61 62 63 64 66 67 68 69 70 71 60 65 51 48 47 44 40 43 41 42 49 45 55 56 57 52 53 54 58 59 46 93 94 95 96 97 98 99 92 80 81 83 84 85 86 88 89 91 87 90 01 02 03 04 05 06 07 08 09 10 11 1 2 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [...]

  • Page 13

    Standard Optional ACCESSORIES T 006186008 All purpose foot E 006907008 Overcasting foot 006099008 Brush/ Seam ripper Screwdriver (L & S) 006012008 I 006905008 Zipper foot F 006904008 Blind hem foot 006914008 Button sewing foot Second spool pin R60033209 020L008000 H1A1464209 D 006H1A0004 Buttonhole foot A 006172008 Satin stitch foot M 006813008[...]

  • Page 14

    9 Connecting the machine Before connecting the power supply , make sure that the voltage and frequency shown on the machine is conforming with your electrical power . Place machine on a stable surface. 1. Connect the power line cord to the machine by inserting the 2-hole plug into the power cord socket. 2. Connect the power line plug to the electri[...]

  • Page 15

    10 Bobbin winding WINDING THE BOBBIN Place the thread and spool holder onto the spool pin. F or larger spools of thread, place the large side of the spool holder toward the spool. F or smaller spools of thread, place the small side of the spool holder toward the spool, or use the small spool holder . If the thread spool has a thread retaining slit,[...]

  • Page 16

    11 WINDING THE BOBBIN Please Note: When the bobbin winder switch is placed on the right, "bobbin winding position", the machine will not sew and the handwheel will not turn. T o start sewing, push the bobbin winder switch to the left "sewing position". Hold the thread tail securely in one hand. Press the Start/stop button or the[...]

  • Page 17

    12 INSERTING THE BOBBIN Attention: T urn power switch to off ("O") before inserting or removing the bobbin. When inserting or removing the bobbin, the needle and presser foot must be fully raised. 1 Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction (arrow). 1 2 Pull the thread through the slit (A[...]

  • Page 18

    13 THREADING THE UPPER THREAD Please Note: It is important to carry out the threading correctly as by not doing so several sewing problems could result. Start by raising the needle to its highest point, and also raise the presser foot to release the tension discs. 1 Lift up the spool pin. Place the spool of thread on the spool pin so that the threa[...]

  • Page 19

    14 THREADING THE UPPER THREAD 4. Thread the tension module by passing the thread b e t w e e n the silver discs. 5. Then, down and around the check spring holder . 3 Guide the thread around the thread guide pulling the thread through the pre-tension spring as illustrated. 5 6 7 3 4 6. At the top of this movement, pass the thread from right to the l[...]

  • Page 20

    15 USING THE NEEDLE THREADER 2 The needle threader automatically turns to the threading position and the hook pin passes through the needle eye. 3 T ake the thread in front of the needle. 4 Hold the thread loosely and release the lever slowly . The hook will turn and pass the thread through the needle eye forming a loop. Pull the thread through the[...]

  • Page 21

    16 CUTTING THE THREAD Raise the presser foot. Remove the fabric, draw the threads to the left side of the face cover and cut using the thread cutter . The threads are cut at the proper length to start the next seam. 1 Hold the upper thread with the left hand. T urn the handwheel towards you (counterclockwise) lowering, then raising the needle. 2 Ge[...]

  • Page 22

    17 TWO -STEP PRESSER FOOT LIFTER The presser foot lifter raises and lowers the presser foot. When sewing several layers or thick fabrics, the presser foot can be raised a second stage for easy positioning of the work.[...]

  • Page 23

    ST ARTING SEWING 18 With the sewing machine turned off , insert the foot control plug into its connector on the sewing machine. T urn on the sewing machine, and then slowly depress the foot control to start sewing. Release the foot control to stop the sewing machine. Foot control The Start/Stop button can be used to run the machine when the foot co[...]

  • Page 24

    - Basic thread tension setting is "4". T o increase the tension, turn the dial to the next number up. T o decrease the tension, turn the dial to the next number down. - Proper setting of tension is important for good sewing. There is no single tension setting appropriate for all the stitch functions and fabrics. However , 90% of all sewin[...]

  • Page 25

    20 CHANGING THE PRESSER FOOT Attaching the presser foot holder Attaching the presser foot Removing the presser foot Attaching the edge/guilting guide Raise the presser foot bar (a) by raising the presser foot lifter . Attach the presser foot holder (b) as illustrated. Lower the presser foot holder (b) until the cut-out (c) is directly above the pin[...]

  • Page 26

    21 PRESSER FOOT CHART All purpose foot (T) Zipper foot (I) Buttonhole foot (D) Darning/ Embroidery foot (Optional) Gathering foot (Optional) Button sewing foot W alking foot (Optional) APPLICA TION PRESSER FOOT PRESSER FOOT APPLICA TION Inserting zippers Satin stitch sewing Quilting foot (P) (Optional) Quilting Free-motion darning, embroidery , mon[...]

  • Page 27

    NEEDLE, FABRIC, THREAD SELECTION GUIDE Please Note: - In general, fine threads and needles are used for sewing fine fabrics, and thicker threads are used for sewing heavy fabrics. - Always test thread and needle size on a small piece of fabric which will be used for actual sewing. - Use the same thread for needle and bobbin. Heavy duty thread, carp[...]

  • Page 28

    REPLACING THE NEEDLE 23 Change the needle regularly , especially if it is showing signs of wear and causing problems. Insert the needle following the illustrated instructions. A . Loosen the needle clamp screw and tighten again after inserting the new needle. The flat side of the shaft should be towards the back. B . Insert the needle as far up as [...]

  • Page 29

    24 Start/stop button OPERA TION BUTTONS The machine will start running when start/stop button is pressed and will stop when pressed the second time. The machine will rotate slowly at the beginning of sewing. The sewing speed will increase slowly until reaching the speed setting selected with the speed limiting adjustment lever . The foot control mu[...]

  • Page 30

    25 OPERA TION BUTTONS Needle up/ down position button With the Needle up/ down position button, you decide whether the needle shall stop in the up position or in the material when you stop sewing. When you press the button so that the arrow (which displays just to the right of the needle icon on the LCD screen) will point upward, the needle will st[...]

  • Page 31

    Stitch width adjustment button Mode selection button Stitch width adjustment buttons Stitch length adjustment buttons Elongation button Mirror button T win needle button 26 FUNCTION BUTTONS FUNCTION BUTTONS When you select a stitch, the machine will automatically set the recommended stitch width, which will be indicated by numbers on the LCD screen[...]

  • Page 32

    27 FUNCTION BUTTONS MODE selection button Elongation button (see page 59) A Group P atterns 28-51 can be elongated up to five times its normal length by pressing the " " button. When the width or length or stitch is changed, a greater variety of patterns are available. The LED light will be set at direct mode " " when start the [...]

  • Page 33

    28 FUNCTION BUTTONS T win needle button (see page 61) With the twin needle, the Direct P atterns 1-9, A Group P atterns 00-13, 28-99, and B Group P atterns 00-99 can be sewn in two parallel lines of the same stitch with two different threads. Press the " " button, the machine automatically reduces the maximum width for twin needle sewing.[...]

  • Page 34

    Direct pattern selection and number buttons Clear button Edit button Memory button Direct pattern selection and number buttons 29 SELECTION BUTTONS Direct pattern selection Press the buttons to select the utility patterns shown beside the number button when the mode button is set at the Direct mode. Number buttons T o select the desired pattern and[...]

  • Page 35

    30 SELECTION BUTTONS Press this button when the incorrect character is selected. Each press of this button erases one character , or press this button to remove an added pattern when sewing combinations of characters or decorative stitches. Clear button Edit button If you wish to modify any settings in the memory mode, use the stitch width " +[...]

  • Page 36

    31 Free-arm sewing is convenient for sewing tubular areas such as pant hems and cuffs. Free arm Sewing corners 1. Stop the sewing machine when you reach a corner . 2. Lower the needle into the fabric manually or by pressing the needle up/ down button once. 3. Raise the presser foot. 4. Use the needle as a pivot and turn the fabric. 5. Lower the pre[...]

  • Page 37

    32 Installing the extension table The black button on the left side of the all purpose presser foot will lock the presser foot in a horizontal position if you push it in before lowering the presser foot. This ensures even feeding at the beginning of a seam and helps when sewing multiple layers of fabric such as sewing over seams when hemming jeans.[...]

  • Page 38

    33 Adjusting the stitch width The maximum zigzag stitch width for zigzag stitching is "7.0"; however , the width can be reduced on any patterns. The width increases as you press the " + " of stitch width adjustment button from "0.0-7.0". Adjusting the stitch length The density of zigzag stitches increase as the setting[...]

  • Page 39

    34 Stretch stitches are strong and flexible and will give with the fabric without breaking . Good for easy to ravel and knit fabrics. It is good for joining durable fabric such as denims. These stitches can also be used as a decorative top stitch. Straight stretch stitch is used to add triple reinforcement to stretch and hardwearing seams. Stretch [...]

  • Page 40

    35 OVERCASTING STITCHES 1 Change the presser foot to the all purpose foot. 2 Sewing the overcasting along the edge of the fabric so that the needle drops over the edge of the fabric on the right side. Using the all purpose foot T 2.5~4.5 2.0~3.0 1 2 A-02 2 Using the overcasting foot E 5.0~7.0 2.0~3.0 Attention: The overcasting foot should be used t[...]

  • Page 41

    36 BLIND HEMS 9: A-03: A-04: Blind hem for woven fabrics Blind hem for stretch fabrics Blind hem for stretch fabrics A-03 A-04 9 a b F old the fabric as illustrated with the wrong side uppermost. Adjust the guide (b) by turning the knob (a) so that the guide just rests against the fold. T urn over the fabric. 5mm 5mm Overcasting stitches Reverse si[...]

  • Page 42

    37 BUTTON SEWING 2.5~4.5 Select the pattern 25 from the Group P atterns "A" to get the button sewing stitch. Change the presser foot to the button sewing foot. Move the drop feed lever to " " to lower the feed dogs. F or buttons with 4 holes, sew through the front two holes first, push work forward and then sew through the back [...]

  • Page 43

    38 Please Note: Before sewing a buttonhole on your project, practice on a scrap piece of the same type of fabric. Attach the buttonhole foot, then pull out the button holder plate and insert the button. The size of the buttonhole is determined by the button inserted in the button plate. The thread should be passed through the hole in the presser fo[...]

  • Page 44

    39 Select the buttonhole stitch. Adjust the stitch width and the stitch length to the desired width and density . P osition the fabric under the presser foot so that the centerline's mark is aligning with the center of the buttonhole foot. Lower the buttonhole lever , making sure it is positioned behind the bracket on the buttonhole foot, as i[...]

  • Page 45

    40 6 Buttonholes are sewn from the front of the presser foot to the back, as shown. 6 A-21 A-20 A-16 A-18 A-17 A-19 A-15 0 7 Cut the center of the buttonhole being careful not to cut any stitches on either side. Use a pin as a stopper at the bar tack so y o ud on o tc u tt o om u c h . 7 6 BUTTONHOLE SEWING A-14 A-14 7[...]

  • Page 46

    41 When sewing corded buttonholes, hook a heavy thread or cord under the buttonhole foot. Please Note: It is suggested that you use interfacing on the backside of the fabric. Once sewing is completed, pull the gimp thread gently to remove any slack, then trim off any excess. 2 Attach the buttonhole foot and hook the gimp thread onto the back of the[...]

  • Page 47

    42 BAR T ACK STITCH 1.0~3.0 0.3~1.0 D 1 Select pattern 22 of Group "A" to get the bar tack stitch. Change the presser foot to the buttonhole foot. from the P atterns 2 Pull the button holder to the rear . Set the button guide plate on the buttonhole foot to the desired length. 2 1 A-22 4 P ass the upper thread down through the hole in the[...]

  • Page 48

    43 EYELET STITCH A-23: A-24: Select for sewing eyelets on belts , etc Select for sewing eyelets on belts , etc 5.0 6.0 7.0 1 Select pattern 23 or 24 from the Group P atterns "A" to get the eyelet stitch. Attach presser the foot "A". 1 A A-23 A-24 2 Press the " " or " + " stitch width adjustment to button sele[...]

  • Page 49

    44 DARNING STITCH 3.5~7.0 1.0~2.0 D A-26 A-27 1 Select pattern 26 or 27 from the Group P atterns "A" to get the darning stitch. Change the presser foot to the buttonhole foot. 1 2 Baste the upper fabric and the reinforcement fabric together . Select the width of the pattern by using the stitch width button. L ower the presser foot over th[...]

  • Page 50

    45 DARNING STITCH Please Note: When lowering the presser foot, do not push in the front of the presser foot, otherwise the darning will not be sewn with the correct size. 5 P osition the fabric so that the needle is 2mm (1/16 inch) in front of the area to be darned, and then lower the presser foot lever . 7 Darning stitches are sewn from the front [...]

  • Page 51

    46 ZIPPER INSERTION 1 Baste the zipper opening on the garment. 2 Press open the seam allowance. Place the zipper face down on the seam allowance with the teeth against the seam line. Baste the zipper tape in place. I Attention: Zipper foot should be used with machine set for straight stitch in center needle position. It is possible that the needle [...]

  • Page 52

    47 ZIPPER INSERTION Inserting a lapped zipper 1 Baste the zipper opening on the garment. 2 Fold back to the left seam allowance. T urn under the right seam allowance to form 3mm (1/8 inch) fold. 2 3 Attach the zipper foot. Attach the right side of the presser foot pin to the holder when sewing the left side of the zipper . Attach the left side of t[...]

  • Page 53

    48 NARROW HEMMING K 1 Fold the edge of the fabric over about 3mm (1/8 inch), then fold it over again 3mm (1/8 inch) for about 5cm (2 inches) along the edge of the fabric. 2 Insert the needle into the fold by rotating the handwheel toward you, and lower the presser foot. Sew several stitches and raise the presser foot. Insert the fabric fold into th[...]

  • Page 54

    49 M Mark the design on the fabric. Insert the cord in the center groove of the cording foot from the right side opening. Pull the cord about 5cm (2 inches) behind the foot. The grooves of the foot will hold the length of the cord in place while the stitches are being formed over the cord. Select the stitch and adjust the stitch width so that the s[...]

  • Page 55

    SA TIN STITCH SEWING A 3.5~7.0 0.5~2.0 Use the satin stitch foot for satin stitching and sewing decorative stitches. This foot has a groove on the underside which allows dense stitching to pass freely underneath. T o change the satin or decorative stitch pattern, you may adjust the length and width of the pattern by pressing the stitch length and w[...]

  • Page 56

    P Sew the first row and move over the fabric to sew successive rows with the guide riding along the previous row of s titching . 3.5 1.0~3.0 Insert the edge/quilting guide in the presser foot holder as illustrated and set the space as you desire. * The quilting foot is an optional accessory. 1 EDGE/QUIL TING GUIDE 51[...]

  • Page 57

    GA THERING 1.0 4.5 Note: Note: When testing machine for adjustments to achieve desired fullness, work with 10" increments of the fabric, trims or elastic. This makes it easier to determine the adjustments and how much change is needed for your project. Always test on your project fabric and on the same grainline as will be used in your finishe[...]

  • Page 58

    SMOCKING 2 Knot the threads along one edge. Pull the bobbin threads and distribute the gathers evenly . Secure the threads at the other end. 3 Reduce the tension, if necessary and sew decorative pattern stitches between the straight seams. 4 Pull out the gathering stitches. T A 2 3 4 1 Use the all purpose foot to sew straight lines 1cm (3/8") [...]

  • Page 59

    First sew around the edges of the hole to secure the threads. Stitch across the opening moving the hoop backward and forward under the needle. Overlap the outline stitching at each end of the area, keeping the lines of stitching closely spaced and even in length. When the opening is filled, turn the work and cover the area with crosswise lines of s[...]

  • Page 60

    Select the zigzag stitch pattern and adjust the stitch width as desired. Sew at a constant speed, moving the hoop slowly along the lettering. When the letter is finished. Secure with a reinforcement stitches at the end by press Auto- lock button. * Embroidery hoop is not included with the machine. Monogramming Stitch along the outline of the design[...]

  • Page 61

    Please Note: Always try to sew first without the walking foot accessory which should be used only when necessary. It is easier to guide the fabric and you have a better view of the seam when using the standard, regular foot on your machine. Y our sewing machine offers excellent stitch quality on a wide range of fabrics from delicate chiffons to mul[...]

  • Page 62

    3 W orking on the right side of the fabric, place the center of the presser foot on the seam line of the joined fabrics and stitch over the seam. T A 3 1 Place the two fabrics, right sides together , and sew using a straight stitch. 2 Open the seam allowance and press it flat. 2 1 A-08 A-09 A-86 A-10 A-61 DECORA TIVE TOPSTIT CHING 2 1 1 Separate th[...]

  • Page 63

    T A Scallop edging 1 Sew on hem line. 2 T rim the fabric close to the stitching taking c a r en o tt oc u tt h et h r e a d . 2 1 A-13 A-35 SCALL OP STITCH T 3 T urn fabric over and push out the curved seam to the surface and press it. Scallop hem 3 1 Fold the fabric, right sides together . Sew along the folded edge, as illustrated. 2 Cut the fabri[...]

  • Page 64

    EL ONGA TION 1 The stitches shown in the diagram above can be elongated up to five times the normal length by pressing the elongation button. 2 The LCD screen icon for elongation imaging of the pattern appears. Please Note: Patterns from A Group 28-51 can be elongated and mirrored simultaneously. 3 When the width or length of the stitch is changed,[...]

  • Page 65

    1 Select the pattern. 3 The LCD screen icon for mirror imaging of the pattern appears. 2 Pressing the mirror button. A . Normal pattern sewing. B . Mirror pattern sewing. A B 2 3 1 MIRROR IMAGE 1 2 3 Please Note: - The cannot be mirror imaged. - Mirror imaged patterns can also be combined with other patterns. Direct Patterns " " and A Gro[...]

  • Page 66

    USING THE TWIN NEEDLE 2 F ollow the instructions for single-needle threading using the horizontal spool pin. Thread through the left needle. Set the second spool pin (included with the accessories) into the hole on the top of the machine. Thread through remaining points, making certain to omit the thread guide above the needle and pass thread throu[...]

  • Page 67

    Please Note: - Multiple patterns selecting from pattern mode s,,,c a n b e c o m b i n e d a n d s e w n together. - This machine has 4 modules of program memory and each module can retain 20 units of stitches. - cannot be entered into memory. - All the units in the memory can be edited to set its function such as Stitch length, Stitch width, Elong[...]

  • Page 68

    MEMORY M M 6 The selected pattern displays on the LCD screen. 7 Repeat step 5, 6 for more patterns to be stored in the memory . Please Note: When the memory the full with 20 units of patterns, the machine will beep to signal it. 5 Press the desired pattern number . (e.g. 60) 8 Press the " " button to leave the memory mode and return to th[...]

  • Page 69

    MEMORY Editing patterns 1 Use the stitch width adjustment button to select the pattern that you wish to edit while in the memory mode. 2 Press the " " button to edit the pattern. The stitch length, stitch width, Elongation, Mirror , and Auto -lock of the patterns can be adjusted manually . 4 Press the " " button when complete an[...]

  • Page 70

    MEMORY 5 The screen shows the current sewing pattern. 6 Press the " " button to leave memory mode and return to the normal screen. 000 1 Press the " " button to enter memory mode and then input the number of memory module when the cursor start flashing. 2 Input the number of memory module. (e.g. 2) 3 LCD screen shows the first p[...]

  • Page 71

    Instruction animation message display Bobbin winding The bobbin winder is winding the bobbin. WARNING FUNCTIONS W arning animation message display The sewing machine is experiencing a problem The animation message means that the thread is twisted or jammed and the hand wheel axle cannot move. Please look through the "T rouble shooting guide&qu[...]

  • Page 72

    WARNING FUNCTIONS - When operating correctly: 1 beep - When the memory is full 20 units of pattern: 2-short beeps - When operating incorrectly: 3-short beeps - When the sewing machine is in trouble and can't sew: 8 seconds short beeps It means that the thread is twisted or jammed and the hand wheel axle can't move. Please refer to the &qu[...]

  • Page 73

    BUZZER SOUND 2 Y ou can select the mode by pressing the stitch width " + " or " " button. Select desired mode sound on " "or sound off "" .  3 Pressing the " " button. The Buzzer sound setting mark will appear on the LCD screen when you have set it. 0000 3 1 Press on the " " button and [...]

  • Page 74

    If the surface of the sewing machine is dirty , lightly soak a cloth in mild detergent, squeeze it out firmly and then wipe the surface. After cleaning it once in this way , wipe the surface again with a dry cloth. Cleaning the sewing machine surface Attention: Disconnect the machine from the wall outlet before carrying out any maintenance. Cleanin[...]

  • Page 75

    70 MAINTENANCE 3 Remove the needle, presser foot and presser foot holder . Remove the bobbin cover plate and bobbin. Remove the screw holding the needle plate and remove the needle plate. 4 Lift up the bobbin case and remove it. 5 Clean the hook race, feed dog and bobbin case with a brush. Also clean them, using a soft, dry cloth. 6 Replace the bob[...]

  • Page 76

    TROUBLE SHOOTING GUIDE Before calling for service, check the following items. If the problem still persists, contact Singer at www .singer .com Problem Cause Correction Upper thread breaks Lower thread breaks Skipped stitches 1.The machine is not threaded correctly . 2.The thread tension is too tight. 3.The thread is too thick for the needle. 4.The[...]

  • Page 77

    72 TROUBLE SHOOTING GUIDE Seam puckering 1.The needle thread tension is too tight. 2.The needle thread is not threaded correctly . 3.The needle is too heavy for the fabric being sewn. 4.Shorten stitch length is too long for the fabric. 1.Loosen the thread tension. 2.Rethread the machine. 3.Choose a needle to suit the thread and fabric. 4.Make stitc[...]

  • Page 78

    73 A group patterns -100 Utility stitches Buttonhole stitches Functions Presser Foot Stitch P attern Auto Manual Auto Manual Auto-lock Elongation Mirror/ Presser foot T win needle Reverse Width (mm) Length (mm) Memory Direct patterns -10 Functions Presser Foot Stitch P attern Auto Manual Auto Manual Auto-lock Elongation Mirror/ Presser foot T win n[...]

  • Page 79

    74 Cross stitches Buttonhole stitches Satin stitches Darning stitches Functions Presser Foot Stitch P attern Auto Manual Auto Manual Auto-lock Elongation Mirror/ Presser foot T win needle Reverse Width (mm) Length (mm) Memory 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 2[...]

  • Page 80

    75 : Adjustments can be made. Cross stitches Decorative stitches Functions Presser Foot Stitch P attern Auto Manual Auto Manual Auto-lock Elongation Mirror/ Presser foot T win needle Reverse Width (mm) Length (mm) Memory 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 6.0 4.0 4.0 6.0 6.[...]

  • Page 81

    76 B group patterns -100 Decorative stitches Functions Presser Foot Stitch P attern Auto Manual Auto Manual Auto-lock Elongation Mirror/ Presser foot T win needle Reverse Width (mm) Length (mm) Memory 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 7.0 7.0 6.0 5.0 7.0 7.0 7.0 5.0 [...]

  • Page 82

    77 Decorative stitches Functions Presser Foot Stitch P attern Auto Manual Auto Manual Auto-lock Elongation Mirror/ Presser foot T win needle Reverse Width (mm) Length (mm) Memory 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 6.0 7.0[...]

  • Page 83

    78 Decorative stitches : Adjustments can be made. Functions Presser Foot Stitch P attern Auto Manual Auto Manual Auto-lock Elongation Mirror/ Presser foot T win needle Reverse Width (mm) Length (mm) Memory 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 7.0 7.0 7.0 7.0 6.0 6.0 6.0 6.0 5.5 6.0 6.0 7.0 6.0 5.0 5.0 5.0 7.0 5.0 5.0 6.0 5[...]

  • Page 84

    Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance 021H5A0101(A) (H50A) ( ) May/09 SINGER 2010[...]