Newcon Optik NV66-G2 manuel d'utilisation

Operation Manual NIGHT VISION BI NOCULARS/ GOGGLES NV66 – G2 105 Spar ks Ave., Toro nto, ON, M 2H 2S5, Canada[...]

[...]

ii IMPORTANT INFORMATION Read prior to activa tion. You have pu rchased a so phis ticated electronic device. To operate it properl y, please read this manual carefully. Ignoring the operation procedures described in this manual will void your warranty .  NEVER disass emble the unit. This device co ntains a source of high volta ge, which m ay be [...]

iii PRECAUTIONS NV66-G2 is a sophis ticated precise optical instrument equipped wit h electronics. It s hould be han dled with due care:  Unit contai ns fragile c omponent s. Avoid i mpacts, dust, moisture and s harp changes of temperature.  Do not touch the optical s urfaces other than for cleaning. Doing so m ay damage the anti-refl ection [...]

1 TABLE OF CONTENTS 1. OVERVIE W ................................................................ 3 2. DELIVERY S ET ......................................................... 5 2.1 Standar d delivery set ................................ 5 2.2 Optional acces sories ................................5 3. SPECIFICATION S ................................[...]

2 6. TROUBLESH OOTING ............................................18 6.1 No green light through eyepieces........... 18 6.2 Im age is unclear ..................................... 18 6.3 Im age flashes ......................................... 18 6.4 Condensation accum ulates on the parts .18 6.5 Visibility decreased or disa ppeared ....... 19 7. W[...]

3 1. OVERVIEW NV66-G2 (the unit) is optoelectronic gog gles intended for observation of objects a nd orie ntation at ni ght or under dark condit ions. T he unit is equippe d with a generation 2+ intensifier tube, which amplifies low light, such as moonlight , starli ght or ma n-made light . Add-on lens can be attached to the unit to increase magnif[...]

4 Features  Built-in infrared illuminator allows observ ation in total darkness (i.e. cave or dark ro om);  Helmet m ount (opt ional) allo ws combat ant operations  Flip/flop mechanism provides for unobstru cted vision whe n the unit i s mount ed on head gear or helmet  Waterproof design (1 meter deep immersion for 30 minutes)  Soft [...]

5 2. DELIVERY SET 2.1 Standard delivery set QUANTITY NV66-G2 unit with 1x lens and headgear 1 Lens cap 1 Neck strap 1 Soft case 1 Manual 1 Warranty card 1 AA battery 2 2.2 Optional acce ssories 3x, 4x, 5x, 8x lenses Hard case Lens cleaning kit Helmet m ount Exact Delivery Set is subject t o the specific contract terms.[...]

6 3. SPECIFICATIONS 3.1 Unit specifications Image Intensifier Tube (IIT) 18 mm Gen. 2+ Apparent field of view 40 º Eye relief 15 mm 1x Objective focal length / F-number 27.5 mm / F1.2 4x, 5x, 8x Objective focal length, mm / F number 100 / F1.5, 130 / F2.3, 216.4 / F2.0 Interpupillary distance 57-73 mm Focus range (1x) 0.25 m -  Dioptric correct[...]

7 3.2 Main tube parameter s Image Intensifier Type (Generation/Grade) EPM66G2 Photocathode operating diameter 18 mm Photocathode type S-25 Photocathode sensitivity: Integral 450  A/ lm Spectral at  = 850 nm 26 mA/W Light amplification >20,000 fl/fc Image magnification 1x Signal-to-noise ratio, min 18 Current consumption, max 18 mA Voltage [...]

8 3.3 Spatial frequency-cont rast charact eristic Frequency, lines/mm Contrast transfer coefficient 2.5 0.83 7.5 0.56 15.0 0.30 3.4 Field of view cleanness Allowed spot diameter,  m I ZONE 0 - 5, 6 mm II ZONE 5, 6 - 14,7 mm III ZONE 14,7 - 17, 5 mm Over 250 0 0 0 150 to 250 0 0 1 100 to 150 0 2 2 50 to 100 1 3 3 0 to 50 Not specified[...]

9 4. UNIT DESIGN 1 - On-Off, IR switch 6 - Objective lens cover 2 - Mounting socket 7 - Objective lens 3 - Eyepiece adjustment ring 8 - Tightening screw 4 - Eyepieces 9 - Lever 5 - Battery comp artment cover 9 8 Fig.2 Headgear 1 2 7 6 5 3 4 Fig.1 NV66-G2 goggles[...]

10 5. OPERATION INSTRUCTIONS 5.1 Installing battery Unpack the device. Unit is supp lied with battery not installed. Prior to installing the batter y, make sure the switch (1, Fig.1) is in the OFF position and the lens cap is on. Unscrew the battery compartment cover (5, Fig.1), and install 2 fresh AA batteries. Observe the correct po larity indica[...]

11 Fig.3 Low bat tery indi cator When the unit is ON user m ay see a circular indicator through the eyepiece (F ig. 3). It is hard ly noticeable when not active. Flashing indicates low batte ry. For uninterrupted operation keep fresh batteries ready and repl ace them on time. Solid red dot indicates that the IR illuminator is on. In the daytime wit[...]

12 5.4 Operating at night Take off the l ens cover (6, Fig.1) from t he lens (7, Fig .1). Turn on the d evice using sw itch (1, Fi g.1). If lig hting is insufficient, turn on the IR illuminato r by turning switch (1, Fig.1). The red i ndicator (Fig. 3 ) will go on. IR illuminator is effective when o bserving an obj ect located not far from the view[...]

13 5.6 Focusing To obtain sharp image at ot her distance ad just the lens focus (7, Fig.1) leavi ng eyepiece setting intact. You should be able to obtain a sharp image for dis tances from 0.2-10 m to infinity dependi ng on le ns ma gnification. 5.7 Using Unit with head gear Prior to using the unit with the headgear adjust all the straps to the he a[...]

14 5.9 Installation of interchangeable lenses Do not apply an excessive force when changing the lenses. The following p rocedure is identical f or 1x, 4x, 5x or 8x lenses. 1. Make sure the unit is off. 2. Remove t he lens cap (6, Fig.1) . 3. Detach the current lens: hold the lens by its base (1, Fig.1) a nd rotat e it counter-cl ockwise. On ce the [...]

15 Fig.4 NV66-G2 wit h 4x lens Fig.5 NV66-G2 wit h 8x lens[...]

16 5.10 Using opti onal helmet mount The unit can b e equipped wi th an opt ional he lmet m ount. This mount c an be customized to fit a variet y of existing helmet models. The mount is attached to a helmet with straps . 1 - Locking screw 3 - Flip/Flop adjusting screws 2 - Flip/Flop button 4 - Mount binding screw 1 2 3 4 Fig.6 NV66-G2 wit h 8x lens[...]

17 The unit is fixed to the mount by a locking screw (1, Fig. 7). To adjust the position of the unit to your eye level, use the screw (4, Fig. 7). To adjust the eye relief first loosen locking screw (1, Fig. 7) and set a com f ortable dist ance between the eyes and t he eyepiece; then tighten the locking screw back. You can fixate the unit in three[...]

18 6. TROUBLESHOOTING 6.1 No green light through eyepieces Check that the batteries are installed prop erly. Check the charge of the batteries. Replace t he m if they are weak. 6.2 Image is unclear Check if the lenses are fogg y or dusty. Clean them if necessary. If the image is still unfocused – a djust the eyepieces; see chapter 5 for details. [...]

19 6.5 Visibility decreased or disappeared Bright light sources (t he Moon, projectors or hea dlights) may cause visibility to degrade or even co mpletely disappear. Move t he device a way from t he light source immediately. The image will be restored within two minutes. Adverse atmospheric c onditions such as fog, haze or extremely dark environmen[...]

20 7. WARRANTY NEWCON warrants this product against defects in materials and workmanshi p for one year from the date of the original purchase, longer wa rranty is available, subject to the terms of the specific sales contract. Should your Newcon product prove to be defective during th is period, please deliver the product secu rely packaged in its [...]

21 8. CUSTOMER SUPPORT Should you experience an y difficulties with your Newcon Optik product, consult this manual first. If the probl em rem ains, contact ou r custom er support department at +1(416) 663- 6963 or toll free at 1-877 -368- 6666 (North A merica only). Our operat ing hours are 9am-5pm, Monday - Friday, Eastern Standa rd Time. Under no[...]

22 9. ACCEPTANCE CERTIFICATE Image intensifier tube serial number: _____________ ____________ _______________ ______ Min imu m Mea sur ed Resolution, lp/mm 45 Photocathode sensitiv ity, integral,  A/lm 450 Light ampl ification 20000 Date of pr oducti on: _____________ ____________ _______________ ______ Quality Inspector’s signature: _________[...]

23 NIGHT VISION DEVICE NV 66-G2 Unit serial number: _____________ ____________ _______________ ______ The unit complies with all technical specificatio ns and has passed the ins pection. Date of pr oducti on: _____________ ____________ _______________ ______ Quality Inspector’s signature: _____________ ____________ _______________ ______ Quality [...]

NEWCON OPTIK  Printed in Canada R1 – 5.11[...]