Français dropdown-ico

ICP DAS USA 7000 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation ICP DAS USA 7000. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel ICP DAS USA 7000 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation ICP DAS USA 7000 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation ICP DAS USA 7000 devrait contenir:
- informations sur les caractéristiques techniques du dispositif ICP DAS USA 7000
- nom du fabricant et année de fabrication ICP DAS USA 7000
- instructions d'utilisation, de réglage et d’entretien de l'équipement ICP DAS USA 7000
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage ICP DAS USA 7000 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles ICP DAS USA 7000 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service ICP DAS USA en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées ICP DAS USA 7000, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif ICP DAS USA 7000, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation ICP DAS USA 7000. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 1 User’s Manual Warranty All products manufactu red by ICP DAS are under warranty regarding defectiv e materials for a perio d of one year from the date of deliv ery to the original purcha ser. Warning ICP DAS assumes no li ability for dam ages resulti ng from th[...]

  • Page 2

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 2 Table of Contents 1. Introduction .......................................................................................... 5 1.1 The 7000 series overv iew .................................................. 5 1.2 Related Document ation for the 7000 S eries .....[...]

  • Page 3

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 3 3.2.1 The I-756 1 Sy stem Network C onfigura tion: ....................... 39 3.2.2 T he I-756 1 Block Diagram : ............................................... 39 3.2.3 I-7 561 has th ree dif ferent Outpu t type. .............................. 40 3.2.4 I-7561 is[...]

  • Page 4

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 4 6.3 PC Netw orking Applica tions ............................................. 78 6.4 RS-232 D ev ices N etw ork ................................................. 79 7. Quick Star ting the 7000 Series ......................................................... 80 7[...]

  • Page 5

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 5 1. Introductio n The 7000 series is a family of re mote controllable data acquisition module s . They provide A/D, D/A, DI/O , Timer/Counter, MMI and other functions. The s e modules can be controlled remotely by a se t of command s. 1.1 The 7000 series ov er vie[...]

  • Page 6

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 6 Group 3: DA modul e, suppo rt voltage/current ou tput. 7021: 1 cha nnel analog outpu t. 7022: 2 cha nnel analog outpu t. 7024: 4 cha nnel analog outpu t. Group 4: AD modul es, suppor t voltage /current/thermocoup le/RTD measurement 7011/7011D/7011P : single-cha n[...]

  • Page 7

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 7 • 7000 D/A User Manuals: for 7021, 70 22, and 7024. • 7000 Timer/Counter User Manual : for 7080D • 7000 Embedded C ontroller U s er Manual: for 7188 • MMICON Hardware Manual : for MMICON • MMIDOS User Manual: for MMI CON soft ware • Application Note :[...]

  • Page 8

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 8 1.4 The 7000 S eries Sy stem Network for Bu s Type • Multiple Baud Rate • Multiple Data Format I-7520: RS-232 to RS-485 Converter Please r efer to sec t ion 2.1 I-7561: USB to RS-232/422/485 Conv erter Please refer to sectio n 3.2 I-7510: RS-485 Re peater Ple[...]

  • Page 9

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 9 1.5 The 7000 Se ries Sy stem Network for Star Ty pe • Multiple Baud Rate • Multiple Data Format I-7520R: I-7520 with 3000VDC isolatio n at RS-485 side Please refer to sect ion 2.2 I-7563: USB to 3 Ports RS-485 Converter Hub Plea se refe r to sectio n 3.3 I-75[...]

  • Page 10

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 10 Conventional Tw o- Wire RS-485 Netw ork: The conv entional two-wire RS-485 netw ork uses a DIP SWITCH selectable converter to convert host RS-232 or USB signal to a two-w ire RS-485 signal . The baud rate and data format must be set to a fix ed value for the who[...]

  • Page 11

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 11 1.6 7 000 Dimension Back Vie w Top View From View Side View O4.5 X4 56.00 25.00 40.50 7.30 88.50 35.3 0 33.00 72.0 0 25.00 10.50 111.00 50.00 58.50 72.00 56.00 29.5 0 33.0 0 2-SCR EW M3 8[...]

  • Page 12

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 12 Stack Mounting Din – Rail Mounting[...]

  • Page 13

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 13 2. I-7520/A/R/AR, PCI-7520AR, PCISA-7520R 2.1 I-7 520: 2.1.1 Pi n Assignmen t and Specification s: 2.1.2 Block Dia gram: 7520: RS-232 to RS-485 Conv erter • Protocol: Differen tial 2-w ire half-duplex RS-485 • Connector: plug-in screw terminal blo ck • Spe[...]

  • Page 14

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 14 2.1.3 I-7520 is designed Termination resi stor (120 Ohm) on board. Add / Remov e resistor Jumper: For Add resistor : Set JP2 jumper to po sitions 2 and 3. For Remove resisto r: Set JP2 jump er to positi ons 1 and 2. 1 2 3 JP2 Default sitting 120 Ohm on board 1 2[...]

  • Page 15

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 15 2.2 I-7 520R: 2.2.1 Pi n Assignmen t and Specification s: 2.2.2 Block Dia gram: 7520R: RS-232 to RS-485 Converter • Protocol: two-wire RS-485, (D+, D-), protocol • Connector: plug-in screw terminal blo ck • Speed: “Self Tuner” insi de, auto switching b[...]

  • Page 16

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 16 2.3 I-7 520A: 2.3.1 Pi n Assignmen t and Specification s: 2.3.2 Block Dia gram: 7520A: RS-232 to RS-422/485 Converter • Protocol: RS-4 22/485 • Connector: plug-in screw terminal blo ck • Speed: “Self Tuner” inside, au to switching baud rate, from 300 t[...]

  • Page 17

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 17 2.3.3 I-7520 A has three differen t output type How to sele ct I-7520A’s output type? NOTE: RS-422 and RS-485 output type can’t use a t the same time. Type 1: One channel RS-485 ou tput. Type 2: One chann el RS-422 ou tput. Type 3: Two ch annels RS-485 outp [...]

  • Page 18

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 18 Add / Remov e resistor Jumper. For RS -485 channel two. For Add resistor : Set JP3 jumper to po sitions 2 and 3. For Remove resisto r: Set JP3 jump er to positi ons 1 and 2. 1 2 3 JP3 Default sitting 120 Ohm on board 1 2 3 JP3 Remov e resistor[...]

  • Page 19

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 19 2.4 I-7 520AR: 2.4.1 Pi n Assignmen t and Specification s: 2.4.2 Block Diagram : 7520AR: RS-232 to RS-422/485 Converter • Protocol: RS-4 22/485 • Connector: plug-in screw terminal blo ck • Speed: “Self Tuner” inside, au to switching baud rate, from 300[...]

  • Page 20

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 20 2.5 PC I-7520AR Pin Assignment and Specification: CON2: RS-485/422 DB9 Male Connector Terminal 2-wire RS-485 4-wire RS-422 1 2 DATA+ TX+ 3 Not Connect 4 5 Not Connect RX+ 6 7 DATA- TX- 8 9 Not Connect RX- The PCI-7520AR i s exactly the same a s 7520AR except for[...]

  • Page 21

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 21 2.6 PC ISA-7520R Pin Assignment and Specifica t ion: CON2: RS-485 DB9 Male Connector Terminal 2-wire RS-485 1 2 DATA+ 3 4 5 Not Connect 6 7 DATA- 8 9 Not Connect The PCISA-7520R is ex actly the same as 7520R ex cept for the PCI and ISA interfa ce . It is designe[...]

  • Page 22

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 22 2.7 Basic W ire Connection for I-7520: RS 485 wire connecti on. GND  Ext. Power GND +VS   Ex t. Pow er 10V-30V Data-  Data- Data+  Data+ RS 232 wire conne ction Host pin2 (RXD)  7520_Pin 2 Host pin3 (TXD)  7520_Pin3 Host pin5 [...]

  • Page 23

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 23 2.8 How to select 752 0 / 7520R The 7520R is exactly the same as 7520 except fo r the isolation si te. The isolation site o f the 7520 is lo cated in the RS- 232 inter f ace circuit, but the isola t ion si te of the 7520R is located in th e RS-485 interface circ[...]

  • Page 24

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 24 In most application s, the  7520 are used to conv ert the  RS-232 signal to  RS-485 network. Normally the  7520 does no t use the same DC pow er ground as the  H ost PC/PLC, and the isolation site is in the RS-232 section. Therefore the  Host P[...]

  • Page 25

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 25 WARNI NG!! ERRO R CONDITI ON 2: if the  7520 uses the same DC power ground with  Ho st PC/PLC ( for example,  Hos t PC/PLC provide non-iso lated DC power source to  7520). In this situatio n, (1) The  Host PC/PLC is common grou nd w ith power grou[...]

  • Page 26

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 26 The 7520R is designed for PLC networking . During normal condition s, the PLC system w ill have a stab le DC-24V power source. The user may use this p ower source to  7520R(con figuration A). When usin g  7520, the user must use ano ther power source,  [...]

  • Page 27

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 27 3. I-7560 / I-7561 / I-7563 What is USB? USB, or Univ ersal Serial Bus is a connectivity specificati on developed by computer and tele communication industry members for attaching peripherals to computers. USB is design ed to free all the troubles when i nstalli[...]

  • Page 28

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 28 3.1 I-7560 Pin Assignment and Speci f ications: Specifications  Compatibility: USB 1.1 standard.  Input port: USB  Output port : 9-w ire RS-232  Cable: USB ty pe A connector (Type A to Type B cable pro vided).  RS-232 Signals: TxD, RxD, RTS, CTS, [...]

  • Page 29

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 29 3.1.1 The I-7560 Sy stem Netw ork Configuration: 3.1.2 Block Dia gram:[...]

  • Page 30

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 30 3.1.3 I-7560 Driv er Installation Installing the Dev ice This se ction w ill guide y ou on how to instal l the I-7560 US B to RS-232 converter under Window s XP, W indows 2000, Window s ME, and Windows 9 8 operating sy stems. ( No support for WinNT ). Download d[...]

  • Page 31

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 31 4. An “ Install Hardw are Device Drivers” window is show n, Click “Next” to initiate a search for a suitab le driver for y our device. 5. Select op tional search lo cations, if the “CD-ROM drivers” checkbox is selecte d, please in sert the driv er CD[...]

  • Page 32

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 32 6. If the “ Specify a l ocation” is sele cted. Choose the correctpath, E:Napdos700075 6x7560(The ‘E’ is the Di sk tha t Package CD put in). Click “OK” to star t and sear ch. 7. When W indows found a driv er. Click “Next” to instal l the driv[...]

  • Page 33

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 33 8. Windows will the n start to install the driver for the USB-to-Serial Comm Port. Once in stallation is complete, W indow s will prompt y ou that it has finished installing th e software. Cli ck Finish to continue.[...]

  • Page 34

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 34 3.1.4 Veri fying the Installation: This section will guide y ou on how to verify if the I-7560 was properly installed. You w ill also need to determi ne the COM por t assignment made by Window s for the USB to RS-232 conv erter. Note: Before y ou plug in the I-7[...]

  • Page 35

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 35 2. If you w ant to assign the COM Port o f the dev ice to another port number, you can double-click on the dev ice (I-7560 USB-to-RS232 Comm Port) to v iew propertie s . 3. Inside the USB-to-RS232 Comm Po rt Proper ties cli ck on the Po rt Settings tab. Click on[...]

  • Page 36

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 36 4. Inside the A dvanced Settings, click on the COM Port Number an d check w hat other port numbers are un used. If it so happens that Win dows assigned a COM5 to the device, y ou may try to reassign it to a low er unused port number. Cli ck OK when finished . Tr[...]

  • Page 37

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 37 3.1.5 Unin stalling th e Dev ice Driver It is easy to uninstall the USB to Serial device driv er: 1. Run the DRemov er98_2K.exe Uninstall prog ram found on Pa ckage CD, Napdos700 0756x7560 or ftp://ftp .icpda s.com/pub/cd/8000cd/na pdos/7000 /756x/756 0 2. T[...]

  • Page 38

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 38 3.2 I-7561 Pin Assignment and Speci fication s Specifi cations  Com patibilit y: US B 1 .1 s tand ard  Input port : USB  Output port: 3-wire RS-232, RS-4 22, RS-485.  Cable: USB ty pe A connector ( T ype A to T ype B cable pro vided).  Isolati o n[...]

  • Page 39

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 39 3.2.1 The I-7561 Sy stem Netw ork Configuration: • Multiple Baud Rate • Multiple Data Format 3.2.2 The I-7561 Block Diagram:[...]

  • Page 40

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 40 3.2.3 I-7561 has three d ifferent Outpu t ty pe How to sele ct I-7561’s outp ut type? NOTE: RS-422 and RS-485 output type can’t use a t the same time. Type 1: One channel RS-485 ou tput. Type 2: One chann el RS-422 ou tput. Type 3: Two ch annels RS-485 outp [...]

  • Page 41

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 41 Add / Remov e resistor Jumper. For RS -485 channel two. For Add resistor : Set JP3 jumper to po sitions 2 and 3. For Remove resisto r: Set JP3 jump er to positi ons 1 and 2. 1 2 3 JP3 Default sitting 120 Ohm on board 1 2 3 JP3 Remov e resistor[...]

  • Page 42

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 42 3.2.5 I-7 561 Driver Instal lation The drivers o f the I-7561 module include: an USB-RS232 /422/485 driv er and USB COM Port driv er. The drivers are suppli ed for Window s 98/ME/2000/XP (No suppor t for WinNT). Dow nload driver file s from 1. Package CD, N apd[...]

  • Page 43

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 43 Step2: An “ Install Hardw are Device Drivers” w indo w is show n, Click “Next” to initia te a search for a sui table driv er for y our device. Step 3 : Select o ptional search locations, i f the “CD-ROM driv ers” checkb ox is sele cted, please insert[...]

  • Page 44

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 44 If the “S pecify a loca tion” is sele cted. Choose the correct path,H:Napdos70 007561Driv er(The ‘H’ is the Disk that Package CD put in). Cli ck “OK” to start and search. Step 4: Click the “Finish” button to com plete install ation o f the d[...]

  • Page 45

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 45 3.2.7 Install USB COM port The installation m ethod is the same as Se c3.4.1.1 “Instal l USB-RS232 driver”. The Completion w indow is showed as below. Find the serial number of the Com port Step 1: Sele ct the “ Control Panel” from “Start” menu . 1[...]

  • Page 46

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 46 Step 2:Double Click “system” icon to open the “syste m properties” dialog box and Select the “Dev ice Manager” button fr om this dialog box . Step 3:Cli ck the symbol ‘+’ to ex pand the tree v iew of Ports from the “Device Manager” window. Fi[...]

  • Page 47

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 47 3.2.8 Uninstall driv ers Right-click the “USB High Speed Serial Converter” i t em, a menu is show n, select the “Uni nstall” item to remove the USB-RS232 dri ver. Uninstalling the driv er of the US B COM Port is the same as above.[...]

  • Page 48

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 48 3.2.8.1 Changing the CO M Port Number From “Device Manager”, select ”View devices by type”, th en “Ports (COM & LPT)”. Select the USB serial por t and click ” Proper ties”. Select the “Port Settings” tab, and then click Adv anced. Choo se[...]

  • Page 49

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 49 3.2.9 Installa tion under W in98/ME Follow the steps be low: Step 1: Plug the USB cable into the U SB HUB port lo cated in the back of your computer (the “Add New Hardw are Wizard” window is shown as below ); Click “N ext” to continue. Step 2: Click “N[...]

  • Page 50

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 50 Step 3: Sele ct optio nal search l ocations(like “CD-ROM drive”). Click “Next” to start and s e arc h. Step 4: Click “Finis h” to finish installin g the dev ice. Install USB COM port The installation m ethod is the same as Se c3.2.2.1 “Instal l USB[...]

  • Page 51

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 51 3.2.9.1 Find the se rial nu mber of Com port Step 1: Sele ct the “ Control Panel” from “Start” menu . Step 2: Double Cli c k the “ s ystem” i con to open the “system proper ties” dialog box , and Select the “Device Ma nager” from this dialog [...]

  • Page 52

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 52 Step 3: Click the symbol ‘+’ to expand the tree v iew of Ports from the “Device Manager” window. Find the Serial numbe r of your com port.(Find the USB serial port “COM3”) 3.2.9.2 Uninstall drivers Right-click the “US B Serial Port (COM3)” item ,[...]

  • Page 53

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 53 3.2.9.3 Changing the CO M Port Number Step 1: From “Dev ice Manager”, select ”View dev ices by type”, then “ Ports (COM & L PT)”. Select the USB serial port (CO M3) and right-click to open ” Properties”. Step 2: Select the “Port Settings”[...]

  • Page 54

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 54 3.3 I-7563 Pin Assignment and Speci f ications: I-7563 USB to 3 Po rts RS-48 5 Hub Converter ( CH 3 ) ( CH 1 ) ( CH 2 ) ( USB ) V ariable Baud Rate 300,..9600,..1 15.2K V ariable Rate Forma t Introduction The I-7563 i s a co st-effective module for transfe r ser[...]

  • Page 55

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 55 3.3.1 The I-7563 Sy stem Netw ork Configuration: • Multiple Baud Rate • Multiple Data Format 3.3.2 The I- 7563 Block Diagram:[...]

  • Page 56

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 56 3.3.3 I-7563 Driv er Installation This se ction w ill guide y ou on how to instal l the I-7563 US B to 3 Ports RS-485 Hub unde r Windows X P, Windows 2000, W indow s ME, and Windows 98 opera ting systems. ( No support for WinNT ). Download driver files from 1. P[...]

  • Page 57

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 57 4. An “ Install Hardw are Device Drivers” window is show n, Click “Next” to initiate a search for a suitab le driver for y our device. 5. Select op tional search lo cations, if the “CD-ROM drivers” checkbox is selecte d, please in sert the driv er CD[...]

  • Page 58

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 58 6. If the “Spe cify a location” is selected . Choose the corre ct path, E:Napdos700075 6x7563(The ‘E’ is th e Disk tha t Package CD put in). Click “OK” to star t and sear ch. 7. When W indows found a driv er. Click “Next” to instal l the dri[...]

  • Page 59

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 59 8. Wind ows w ill then start to install the driv er for the USB-to-3 Ports Comm Port. Once insta llation is complete, Windows w ill prompt you that it has fi nished in stalling the software. Click Fini sh to contin ue.[...]

  • Page 60

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 60 3.3.4 Veri fying the Installation: This section will guide y ou on how to verify if the I-7563 was properly installed. You w ill also need to determi ne the COM por t assignment made by Window s for the USB to 3 P orts RS-485 Hub . Note: Before y ou plug in the [...]

  • Page 61

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 61 2. If you w ant to assign the COM Port o f the dev ice to another port number, you can double-click on the dev ice (I-7563 USB-to-RS485 Hub) to v iew properties. 3. Inside the USB-to-3 Ports RS48 5 Hub Properties , click on the Port Settings tab. Click on the Ad[...]

  • Page 62

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 62 4. Inside the A dvanced Settings, click on the COM Port Number an d check w hat other port numbers are un used. If it so happens that Win dows assigned a COM5 to the device, y ou may try to reassign it to a low er unused port number. Cli ck OK when finished . Tr[...]

  • Page 63

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 63 3.3.5 Unin stalling th e Dev ice Driver It is easy to uninstall the USB to Serial device driv er: 1. Run the DRemov er98_2K.exe Uninstall prog ram found on Pa ckage CD, Napdos700 0756x7563 or ftp://ftp .icpda s.com/pub/cd/8000cd/na pdos/7000 /756x/756 3 2. T[...]

  • Page 64

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 64 4. I-7551 4.1 I-7551 Pin Assignment and Speci f ications: I ntroduction The I- 7551 Pho to coupler prov ides a complete full-duplex (includi ng con trol signal) ele ctrical isolation channel between tw o RS-232 devices. Thi s is olat io n is an i mpo rt ant c on[...]

  • Page 65

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 65 4.1.1 The I-7551 Sy stem Netw ork Configuration: • Multiple Baud Rate • Multiple Data Format 4.1.2 The I- 7551 Block Diagram:[...]

  • Page 66

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 66 5. I-7510 / I-7510 A / I-7510 AR / I-7513 5.1 I-7510: 5.1.1 Pi n Assignmen t and Specification s: 5.1.2 Block Dia gram: 7510: RS-485 Rep eater • Input: tw o-wire RS-485, (D+, D-) • Output: two-w ire RS-485, (D+, D-) • Speed: “Self Tuner” in side, auto [...]

  • Page 67

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 67 5.2 I-7510A : 5. 2 .1 Pin As si gn men t an d Sp ec ifi cat ions: 5.2.2 Block Dia gram: 7510A: RS-485/RS-422 Repeater • Input: RS-485 /RS-422 • Output: RS-485/RS -422 • Speed: “Self Tuner” inside, auto switchi ng baud rate , from 300 to 115200 BPS • [...]

  • Page 68

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 68 5.3 I-7510AR: 5.3.1 Pin Assignmen t and Specifications: Specifications • Input: RS-485 /RS-422 • Output: RS-485/RS -422 • Speed: “Self Tuner ” inside, auto switching baud rate , from 300 to 115200 BPS • Isolatio n voltage: T hree-way 3000Vdc • Conn[...]

  • Page 69

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 69 5.3.2 Sy stem Network C onfiguration: • Multiple Baud Rate • Multiple Data Format 5.3.3 Block Dia gram:[...]

  • Page 70

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 70 5.4 I-7513: 5.4.1 Pin Assignmen t and Specifications: Specifications • Input: one port RS-485, (D+, D-) • Output: three-port RS-485, (D+, D-) • Speed: “Self Tuner” inside, au to switching baud rate , from 300 to 115200 BPS • Isolatio n voltage: T hre[...]

  • Page 71

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 71 5.4.2 Sy stem Network C onfiguration: • Multiple Baud Rate • Multiple Data Format 5.4.3 Block Diagram :[...]

  • Page 72

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 72 5.5 Ba sic Wi re Connections for I-7510 (1) Extends RS-485 network if the path i s ov er 4000 ft or 1.2 Km (2) Extends RS-485 network if conne cting over 256 modules (3) Cuts a long RS-485 path into several i solated short RS-485 paths for protection[...]

  • Page 73

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 73 6. 7000 RS-485 Netw orking 6.1 S tandard/Isolation Configuration The Host PC /PLC will send out a co mmand string from its RS-232 port. The  7520 w ill convert these R S-232 signals into a RS-485 signal and isolate the ho st from  RS-485 netw ork. The 7000[...]

  • Page 74

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 74 rates ar e differen t. For ex ample,  7xxx=module address 01, baud rate=1200  7xxx=module address 01, baud rate=9600  7xxx=module address 01, baud rate=115200 These three modul es can share the same RS-485 netw ork, generated by  7520. (4) Therefore [...]

  • Page 75

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 75 For example, the  7510,  7510,  7510 are u s ed to isolate local modules from  RS-485 network. If there is high energy transient on  RS-485 netw ork, all the local module s will be safe . Isolation Con figuration (Strongly Reco mmended) If the RS-[...]

  • Page 76

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 76 It is recommend ed to use the “trial and error ” rule. The trial and error rules are giv en as follows: (1) If the len gth o f RS-485 is about 1 .2 Km, try 120 Ω first (2) Run TEST.EXE of NAP7000S Select function_5 , run con t inuously for at least 8 hour [...]

  • Page 77

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 77 6.2 PLC Networking Applications These PLCs can be used at different baud ra tes & differ ent configurations. For ex ample, PLC-1=1 start + 7 data + 1 stop=9-bi t/byte, baud rate=120 0 PLC-n=1 start + 8 data + 1 pari ty + 1 stop=11-bit/by te, baud rate=9600 P[...]

  • Page 78

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 78 6.3 PC Netw orking Application s Every remote-PC must have a unique addre ss. This unique addres s is similar to the module add ress of the 7000 se ries. We call it a “slav e-PC address”. The mod ule address of the 7000 series is limited to 256, but the slav[...]

  • Page 79

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 79 6.4 RS-2 32 Devices Netw ork Some RS-232 dev ices can be connected to the 7000 RS-485 network v er y easily , just li ke the PC or PLC introduced in Sec 2 . 7 and Sec. 2.8. These RS-232 devices must adhere to 3 rules giv en as follows: Rule 1: cannot send out th[...]

  • Page 80

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 80 7. Quick Starting th e 7000 Series 7.1 Find Statu s of Unknown Module Wire connectio n: Refer to Sec. 2 . 7 Test program: Re fer to “NAP7000S U ser Manual” for TEST .EXE Connect I NIT* _pin to GND_pin first as f ollows. The steps to fi nding the status of an[...]

  • Page 81

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 81 7.2 Chan ging Module Address Wire connectio n: Refer to Sec. 2 . 7 Test program: Re fer to “NAP7000S U ser Manual” for TEST .EXE The steps to c hange module address are given as follows. 1. Wire connection, po wer on and run test. exe 2. Press 2 3. Press $01[...]

  • Page 82

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 82 7.3 Chan ging Baud Rate Wire connectio n: Refer to Sec. 2 . 7 Test program: Re fer to “NAP7000S U ser Manual” for TEST .EXE The steps to c hange the baud rate of comm unication are gi ven as follows. 1. Wire connection, po wer on and run test. exe 2. Press 2[...]

  • Page 83

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 83 7.4 Checksum Enable/Disable Wire connectio n: Refer to Sec. 2 . 7 Test program: Re fer to “NAP7000S U ser Manual” for TEST .EXE The steps to enabl e/disable checksum status are given as foll owing. 1. Wire connection, po wer on and run test. exe 2. Press 2 3[...]

  • Page 84

    7000 Bus Converter User Manual (version 1 .2,Feb/2003, 7PH-0 06-10) ------- -------- 84 • Step 3: read the m odule status, ch ksum=DISABLE • Step 5: enable chec ksum with the INIT *_pin floating, so the function fails. If the user want to enable the c hecksu m bytes of the 7000 modul e, the INIT*_pin must be c onnected to the GND_pin. If the IN[...]