Husqvarna RZ5424 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Husqvarna RZ5424. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Husqvarna RZ5424 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Husqvarna RZ5424 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Husqvarna RZ5424 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Husqvarna RZ5424
- nom du fabricant et année de fabrication Husqvarna RZ5424
- instructions d'utilisation, de réglage et d’entretien de l'équipement Husqvarna RZ5424
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Husqvarna RZ5424 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Husqvarna RZ5424 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Husqvarna en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Husqvarna RZ5424, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Husqvarna RZ5424, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Husqvarna RZ5424. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Operator Manual RZ4219 / 965881 101 RZ4620 / 965881201 RZ5424 / 965881301 RZ5422 / 965881401 RZ4619 / 965921501 Please read the operator ’s manual carefully and make sure you understand the instructions before using the machine. English[...]

  • Page 2

    ©2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A. In order to implement improvements, specications and designs can be altered without prior notication. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty[...]

  • Page 3

    CONTENTS English - 3 INTRODUCTION ............................................................... 5 Driving and T ransport on Public Roads ...................... 5 T owing......................................................................... 5 Operating .................................................................... 5 Good Service .........[...]

  • Page 4

    W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower . Each person operating the mower must be of sound mind and body and must not be under the in[...]

  • Page 5

    INTRODUCTION Husqvarna- 5 Congratulations Thank you for purchasing a Husqvarna ride-on mower . This machine is built for superior efciency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance. This manua[...]

  • Page 6

    INTRODUCTION 6 -Husqvarna Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer . See the ce[...]

  • Page 7

    SYMBOLS AND DECALS Husqvarna- 7 These symbols are found on the machine and in the operator ’s manual. Study them carefully so that you know what they mean. Used in this publication to notify the reader of a risk of personal injury or death , particularly if the reader should neglect to follow instructions given in the manual. Used in this publica[...]

  • Page 8

    SYMBOLS AND DECALS 8 -Husqvarna Read Shut off engine and Keep a safe Use on slopes No passengers Operator ’s remove key before distance from no greater Manual performing any the machine than 10° maintenance or repair work Whole body Severing of ngers Do not open or Careful backing up, Careful going exposure to and toes remove safety watch for[...]

  • Page 9

    SAFETY Husqvarna -9 Safety Instructions These instructions are for your safety . Read them carefully . IMPORT ANT : THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROWING OBJECTS. F AILURE TO OBSER VE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJURY OR DEA TH. General Operation Read, understand, and follow all[...]

  • Page 10

    SAFETY 10 -Husqvarna 801 1-520 Never take passengers W atch for trafc when operating near or crossing • roadways. Use extra care when loading or unloading the • machine into a trailer or truck. Always wear eye protection when operating • machine. Data indicates that operators age 60 years and • above are involved in a large percentage of[...]

  • Page 11

    SAFETY Husqvarna -1 1 Personal Safety Equipment 801 1-670a Personal protective equipment 6003-004 Mow up and down, not side to side Make sure that you have rst aid equipment close • at hand when using the machine. Never use the machine when barefoot. • Always wear protective shoes or boots, preferably • with steel toe caps. Always wear app[...]

  • Page 12

    SAFETY 12 -Husqvarna 801 1-509 Be extra cautious when driving on slopes 801 1-517 Never allow children to operate the machine 801 1-518 Keep children away from work area Children T ragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity . Never assume th[...]

  • Page 13

    SAFETY Husqvarna -13 Safe Handling of Gasoline T o avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely ammable and the vapors are explosive. Extinguish all cigarettes, cigars, pipes, and other • sources of ignition. Use only approved gasoline container . • Never remove gas cap or add fuel wi[...]

  • Page 14

    SAFETY 14 -Husqvarna 801 1-515 Never drive the machine in an enclosed space General Maintenance Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the • equipment is in safe working condition. Never tamper with safety devices. Check their • proper operation regularly . Keep machine free of grass, leaves, or oth[...]

  • Page 15

    SAFETY Husqvarna -15 Do not change the settings of governors and avoid • running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components. Sparking can occur when working with the battery • and the heavy cables of the starter circuit. This can cause battery explosion, re or eye injur[...]

  • Page 16

    SAFETY 16 -Husqvarna IMPORT ANT INFORMA TION The parking brake is not sufcient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Always reverse the machine onto the transport vehicle to avoid tipping it over . 801 1-514 Regularly clean deck W ARNING! Escaping hydraulic oil under pre[...]

  • Page 17

    CONTROLS Husqvarna- 17 This operator ’s manual describes the Husqvarna Zero T urn Rider . The rider is tted with either a Kohler or Briggs & Stratton four-stroke overhead valve engine developing 19-24 horse power*. Control Locations Motion control levers 1. Parking brake 2. Throttle control 3. Blade switch 4. Ignition switch 5. Choke contr[...]

  • Page 18

    CONTROLS 18 -Husqvarna 8058-022 Steering controls Steering Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward[...]

  • Page 19

    CONTROLS Husqvarna- 19 UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW Parking Brake 8058-020 Parking brake released IMPORT ANT INFORMA TION The machine must stand absolutely still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower . Blade Switch In order to engage the[...]

  • Page 20

    CONTROLS 20 -Husqvarna UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW 8052-001 Choke control Ignition Switch The ignition key is placed on the control panel and is used to start and stop the engine. Fuses Fuses are located on the left hand side of the machine. They are accessed by tilting the seat fo[...]

  • Page 21

    CONTROLS Husqvarna- 21 Fuel T ank Read the safety instructions before refueling. The machine has one fuel tank, just behind the seat. The tank capacity is 3 gallons (1 1.4 liters). Regularly check the gas cap gasket for damage and keep the cap properly tightened. The engine will run on a minimum of 85-octane unleaded gasoline (no oil mix). Environm[...]

  • Page 22

    CONTROLS 22 -Husqvarna Fuel Shut Off V alve The fuel shut off valve is located at the left rear of the seat. The valve is of f when the handle tab is turned perpendicular to the fuel line. 801 1-419 Fuel shut off valve in the CLOSED position Cutting Height Adjuster T o set the desired deck cutting height, press the release button and move the lever[...]

  • Page 23

    CONTROLS Husqvarna- 23 UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW Seat Adjustment Lever The seat can be adjusted lengthways. When making adjustments, the lever under the right side of the seat is pulled up, after which the seat can be moved backward or forward. 8058-023 Lengthways adjustment Hour Meter The hour meter displays the total operati[...]

  • Page 24

    OPERA TION 24 -Husqvarna Read “Safety Instructions” section and following pages, if you are unfamiliar with the machine. T raining Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities. We suggest that this section be reviewed in its entirety prior to attempting to move the mower under i[...]

  • Page 25

    OPERA TION Husqvarna- 25 UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW Before Starting Read the sections Safety Instructions and Controls • before starting the machine. Perform the daily maintenance before starting • (see Maintenance Schedule in the Maintenance section). Check that there is sufcient fuel in the fuel tank. • Adjust the se[...]

  • Page 26

    OPERA TION 26 -Husqvarna UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW 8061-020 Place controls in neutral position 8052-001 Set the throttle 8052-001 Set the choke control Move the steering controls outward to the locked (outer) neutral position. Move the throttle to the middle position. If the engi[...]

  • Page 27

    OPERA TION Husqvarna- 27 UP BLADES ON DOWN BLADES OFF CHOKE F A ST SL OW When the engine starts, immediately release the ignition key back to the run position. IMPORT ANT INFORMA TION Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying. W ARNING! Engine exhaust and ce[...]

  • Page 28

    OPERA TION 28 -Husqvarna Weak Battery If “jumper cables” are used for emergency starting, follow this procedure: Jumper Cables Connect each end of the RED cable to the • POSITIVE (+) terminal on each battery , taking care not to short against chassis. Connect one end of the BLACK cable to the • NEGA TIVE (-) terminal of the fully charged ba[...]

  • Page 29

    OPERA TION Husqvarna- 29 Running Release the parking brake by pushing the top 1. release button in and moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without rst setting the parking brake will shut off the engine. Move the steering[...]

  • Page 30

    OPERA TION 30 -Husqvarna Engage the mower deck by pulling out the blade 6. switch. Move throttle control to full throttle. 7. The machine’s speed and direction are continuously variable using the two steering controls. When both controls are in the neutral position, the machine stands still. By moving both controls an equal amount forward or back[...]

  • Page 31

    OPERA TION Husqvarna- 31 Mowing Tips Observe and ag rocks and other xed objects to • avoid collisions. Begin with a high cutting height and reduce it • until the desired mowing result is attained. The average lawn should be cut to 2½" (64 mm) during the cool season and over 3" (76 mm) during the hot months. For healthier and be[...]

  • Page 32

    OPERA TION 32 -Husqvarna IMPORT ANT INFORMA TION Leaving the ignition switch in any other position than “OFF” will cause the battery to be discharged. Stopping the Engine Allow the engine to idle a minute in order to attain normal operating temperature before stopping it, if it has been worked hard. Avoid idling the engine for longer periods, a[...]

  • Page 33

    OPERA TION Husqvarna- 33 Manual T ransport When pushing or pulling the mower , engage the EZT (Integrated Zeroturn T ransaxle) bypass linkages. The EZT bypass linkages are located on the rear of the frame, below the rear engine guard. Raise the deck into the highest cutting position. 1. Pull the EZT bypass linkages up and out of 2. the keyhole slot[...]

  • Page 34

    MAINTENANCE 34 -Husqvarna Check the parking brake ● Check the engine’s oil level (every refueling) ● Check the safety system ● Check for fuel and oil leakages ♦ Check/clean the engine’s cooling air intake ● Check the mower deck ● Check for loose hardware (screws, nuts) ● Clean under the mower deck ● Start the engine and blades, [...]

  • Page 35

    MAINTENANCE Husqvarna- 35 W ARNING! Before performing any service or adjustment checklist • Engage the parking brake. • Place the Blade-switch in the disengaged position. • T urn the ignition switch to “OFF” position and remove the key . • Make sure the blades and all moving parts have completely stopped. • Disconnect the spark plug w[...]

  • Page 36

    MAINTENANCE 36 -Husqvarna Battery Y our mower is equipped with a maintenance free battery and does not need servicing. However , periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • See charge for charging times. IMPORT ANT INFORMA TION[...]

  • Page 37

    MAINTENANCE Husqvarna- 37 Ignition System The engine is equipped with an electronic ignition system. Only the spark plugs require maintenance. For recommended spark plugs, see T echnical Data. Remove the ignition cable boot and clean around 1. the spark plug. Remove the spark plug with a spark plug socket 2. wrench. Check the spark plug. Replace th[...]

  • Page 38

    MAINTENANCE 38 -Husqvarna Engine Cooling Air Intake Check that the engine’s cooling air intake is free from leaves, grass, and dirt. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage. The cooling air intakes rotates when the engine is running. Keep ngers away . 8061-014 Check and clean the cooli[...]

  • Page 39

    MAINTENANCE Husqvarna- 39 Kohler Engine - 20 HP The standard engine is not equipped with a prelter . As an option, a prelter can be installed on the inside of the air lter cover . Loosen the two retaining knobs and remove 1. the cover . If the engine has a prelter , it is mounted on the inside of the cover . Clean the area around the ?[...]

  • Page 40

    MAINTENANCE 40 -Husqvarna Kohler Engine - 24 HP These engines are equipped with a replaceable, high density paper air cleaner element. Some engines are also equipped with an oiled, foam precleaner surrounding the paper element. Check the air cleaner daily or before starting the engine. Check for a buildup of dirt and debris around the air cleaner s[...]

  • Page 41

    MAINTENANCE Husqvarna- 41 8009-406 Pull up on handle IMPORT ANT INFORMA TION Do not use compressed air to clean the air lter . Filter should be assembled dry and not be oiled. Briggs & Stratton Engine - 19 HP Pull up the handle on the air lter cover . 1. Unhook and turn towards the engine to remove. Clean the area around the lter eleme[...]

  • Page 42

    MAINTENANCE 42 -Husqvarna IMPORT ANT INFORMA TION Operating the engine with loose or damaged air cleaner components could allow unltered air into the engine causing premature wear and failure. 8009-408 Remove precleaner Carefully lift out the precleaner from the fan 4. housing. Clean the fan housing so debris does not fall into the carburetor . [...]

  • Page 43

    MAINTENANCE Husqvarna- 43 Briggs & Stratton Engine - 22 HP Loosen screws and remove air lter cover . 1. Remove the lter cartridge by pulling 2. upwards along the outside edge. IMPORT ANT INFORMA TION Operating the engine with loose or damaged air cleaner components could allow unltered air into the engine causing premature wear and fai[...]

  • Page 44

    MAINTENANCE 44 -Husqvarna Fuel Filter Replace the line-mounted fuel lter every 100 hours (once per season) or more regularly if it is clogged. Replace the lter as follows: 1. Move the hose clamps away from the lter . Use 2. at-nosed pliers. Pull the lter loose from the hose ends. 3. Push the new lter into the hose ends. Position t[...]

  • Page 45

    MAINTENANCE Husqvarna- 45 Parking Brake Visually check that no damage is found on the lever , cables, or switch belonging to the parking brake. Perform a standstill test and check that there is sufcient braking action. T o adjust the parking brake, contact the Husqvarna service workshop. IMPORT ANT INFORMA TION The machine must be absolutely sta[...]

  • Page 46

    MAINTENANCE 46 -Husqvarna V -belts Check every 100 hours of operation. Check for severe cracking and large nicks. NOTE: The belt will show some small cracks in normal operation. The belts are not adjustable. Replace belts if they begin to slip from wear . Deck Belt Park on a level surface. Apply parking brake. 1. Lower the deck into the lowest cutt[...]

  • Page 47

    MAINTENANCE Husqvarna- 47 Blade replacement Remove blade bolt by turning counterclockwise. 1. Install new or resharpened blade with stamped 2. “GRASS SIDE” facing towards ground/grass (down) or “THIS SIDE UP” facing deck and cutter housing. Install and tighten blade bolt securely . 3. T orque blade bolt to 90 ft/lbs (122 Nm). 4. IMPORT ANT [...]

  • Page 48

    MAINTENANCE 48 -Husqvarna Adjusting the Mower Deck Leveling deck Adjust the deck while the mower is on a level surface. Make sure the tires are inated to the correct pressure. See “T echnical Data” under T ransmission. If tires are under or over inated, the deck cannot be properly adjusted. The deck should be adjusted slightly higher in t[...]

  • Page 49

    MAINTENANCE Husqvarna- 49 Anti-scalp rollers Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti-scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. IMPORT ANT INFORMA TION Adjust[...]

  • Page 50

    MAINTENANCE 50 -Husqvarna Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the dirt sticks. Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower deck. Regu[...]

  • Page 51

    LUBRICA TION Husqvarna- 51 General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be lled with engine oil. When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease. For daily use, the machine should be lubricated twice weekly . 1[...]

  • Page 52

    LUBRICA TION 52 -Husqvarna Cables If possible, grease both ends of the cables and move the controls to end stop positions when lubricating. Ret the rubber covers on the cables after lubrication. Cables with sheaths will bind if they are not lubricated regularly . If a cable binds, it can disrupt operation. If a cable binds, remove the cable and [...]

  • Page 53

    LUBRICA TION Husqvarna- 53 IMPORT ANT INFORMA TION Used engine oil is a health hazard and must not be disposed of on the ground or in nature; it should always be disposed of at a workshop or appropriate disposal location. A void skin contact; wash with soap and water in case of spills. Engine Oil Engine Oil Filter Drain the engine oil in accordance[...]

  • Page 54

    LUBRICA TION 54 -Husqvarna Engine Oil Levels 801 1-500 Remove the dipstick 8009-159 The dipstick markings W ARNING! Engine oil can be very hot if it is drained directly after stopping the engine. Allow the engine to cool to a safe temperature before draining. Check the oil level in the engine when the machine is standing level and the engine is sto[...]

  • Page 55

    TROUBLESHOOTING Husqvarna- 55 Problem Cause Engine will not start Blade switch is engaged. • Steering controls are not locked in the neutral position • Parking brake is not activated • Battery is dead • Contamination in the carburetor or fuel line. • Fuel supply is closed or the shutoff valve for the fuel tank is in • the wrong position[...]

  • Page 56

    TROUBLESHOOTING 56 -Husqvarna Problem Cause Engine overheats Clogged air intake or cooling ns • Engine overloaded • Poor ventilation around engine • Defective engine speed regulator • T oo little or no oil in the engine • Contamination in the carburetor or fuel line. • Fouled spark plugs • Battery not charging Poor contact of the b[...]

  • Page 57

    Husqvarna- 57 ST ORAGE Husqvarna- 57 Winter Storage At the end of the mowing season, the machine should be readied for storage (or if it will not be in use for longer than 30 days). Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carburetor and disrupt engine function. Fuel stabilizers ar[...]

  • Page 58

    SCHEMA TICS 58 -Husqvarna SOLENOID RIGHT MOTION CONTROL LEVER LEFT MOTION CONTROL LEVER SEA T SW. ELECTRIC CL UTCH ENGINE GROUND PTO SW . 7.5 AMP HOURMETER AC CESSO RY OUTLET 20 AMP TO ENGINE PIGT AIL KEY SWITCH POSITIONS POSITION 1 - OFF POSITION 2 - RUN1 POSITION 3 - RUN2 POSITION 4 - ST ART YEL BRN BRN YEL BRAKE SW . BLU BRN BRN PUR BRN GRY GRN [...]

  • Page 59

    TECHNICAL DA T A Husqvarna- 59 *As rated by the engine manufacturer . RZ4219 / 965881 101 RZ4620 / 965881201 Engine Manufacturer Briggs & Stratton Kohler T ype Intek Courage Power 19 hp* 20 hp* Lubrication Pressure with oil lter Pressure with oil lter Oil capacity excluding lter 1.34 qts / 1.27 liters 1.6 qts/ 1.5 liters Oil capacity i[...]

  • Page 60

    TECHNICAL DA T A 60 -Husqvarna RZ4219 / 965881 101 RZ4620 / 965881201 Frame Cutting Width 42" / 107cm 46" / 1 17cm Cutting Height 1.5 - 4" / 3.8 - 10.2 cm 1.5 - 4" / 3.8 - 10.2 cm Uncut Circle 0 0 Number of Blades 2 2 Blade Length 21" / 53.3 cm 22¾" / 57.8cm Nose Rollers No No Sprung Seat Standard Standard Hinged Arm [...]

  • Page 61

    TECHNICAL DA T A Husqvarna- 61 RZ5424 / 965881301 RZ5422 / 965881401 Engine Manufacturer Kohler Briggs & Stratton T ype Courage ELS Power 24 hp* 22 hp* Lubrication Pressure with oil lter Pressure with oil lter Oil capacity excluding lter 1.78 qt / 1.68 liters 1.78 qt / 1.5 liters Oil capacity including lter 2 qts / 1.89 liters 2 qts[...]

  • Page 62

    TECHNICAL DA T A 62 -Husqvarna RZ5424 / 965881301 RZ5422 / 965881401 Frame Cutting Width 54" / 137cm 54" / 137cm Cutting Height 1.5 - 4" / 3.8 - 10.2 cm 1.5 - 4" / 3.8 - 10.2 cm Uncut Circle 0 0 Number of Blades 2 3 Blade Length 18¼" / 46.4 cm 18¼" / 46.4 cm Nose Rollers No No Sprung Seat Standard Standard Hinged Arm[...]

  • Page 63

    TECHNICAL DA T A Husqvarna- 63 RZ4619 / 965921501 Engine Manufacturer Briggs & Stratton T ype Intek Power 19 hp* Lubrication Pressure with oil lter Oil capacity excluding lter 1.34 qts / 1.27 liters Oil capacity including lter 1.46 qts / 1.38 liters Engine oil (See viscosity diagram) SAE 10W30, 10W40, 5W20, 5W30, API SF-SJ Fuel Min 87 [...]

  • Page 64

    TECHNICAL DA T A 64 -Husqvarna RZ4619 / 965921501 Frame Cutting Width 46" / 1 17cm Cutting Height 1.5 - 4" / 3.8 - 10.2 cm Uncut Circle 0 Number of Blades 2 Blade Length 22¾" / 57.8 cm Nose Rollers No Sprung Seat Standard Hinged Arm Rests Accessory Hour Meter Standard Blade Engagement Electromagnetic clutch Deck Construction Stamped[...]

  • Page 65

    TECHNICAL DA T A Husqvarna- 65 Accessories Collection system HEX HEAD CAP SCREWS The torque values shown should be used as a general guideline when specic torque values are not given. U.S. Standard Hardware Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut ft./lbs ft./lbs Nm ft./lbs Nm ft./lbs Nm ¼ 9 12 13 18 5 /16 18 24 28 38 24 [...]

  • Page 66

    66 -Husqvarna CONFORMITY CERTIFICA TES USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulll the requirements. This is also applicable to special requirements for any of the states, (California emission rules etc.). Do not remove any of these labels. Certicates can also be suppli[...]

  • Page 67

    Husqvarna- 67 W ARRANTY All Husqvarna products can be registered online at www .usa.husqvarna.com quickly and easily regardless of their model year . Click the Support tab, click on the Online Product Registration link and ll out the electronic form and submit. Ask about Husqvarna’s extended service plan! SECTION 1 - LIMITED W ARRANTY Husqvarn[...]

  • Page 68

    68 -Husqvarna SER VICE JOURNAL Action Date, mtr reading, stamp, sign Delivery Service 1. Charge the battery . □ 2. Adjust the tire pressure of all wheels to 15 PSI (1 bar). □ 3. Mount the steering controls in the normal position. □ 4. Connect the contact box to the cable for the seat’s safety switch. □ 5. Check that the right amount of oi[...]

  • Page 69

    Husqvarna- 69 SER VICE JOURNAL Action Date, mtr reading, stamp, sign After the First 5-8 Hours 1. Change engine oil. □[...]

  • Page 70

    70 -Husqvarna SER VICE JOURNAL Action Date, mtr reading, stamp, sign 25-Hour Service 1. Check the engine air lter . □ 2. Sharpen/Replace mower blades if required. □ 3. Check the tire pressures. □ 4. Check battery with cables. □ 5. Lubricate according to lubrication chart. □ 6. Check/clean the engine’s cooling air intake. □ 7. Clean[...]

  • Page 71

    Husqvarna- 71 SER VICE JOURNAL Action Date, mtr reading, stamp, sign 50-Hour Service 1. Perform the 25-hour service. □ 2. Clean/replace the air cleaner ’s lter cartridge (paper lter) (shorter intervals for dusty operating conditions). □ 3. Change engine oil. □ 4. Lubricate according to lubrication chart. □ 5. Check/adjust the parkin[...]

  • Page 72

    72 -Husqvarna SER VICE JOURNAL Action Date, mtr reading, stamp, sign 100-Hour Service 1. Perform the 25-hour service. □ 2. Perform the 50-hour service. □ 3. Change the engine oil lter . □ 4. Clean/replace the spark plugs. □ 5. Replace the fuel lter . □ 6. Check V -belts. □ 7. Check tighten caster wheel axle bolts (every 200 hours)[...]

  • Page 73

    Husqvarna- 73 SER VICE JOURNAL Action Date, mtr reading, stamp, sign 300-Hour Service 1. Perform the 25-hour service. □ 2. Perform the 50-hour service. □ 3. Perform the 100-hour service. □ 4. Check/adjust the mower deck. □ 5. Clean the combustion chamber and grind the valve seats. □ 6. Check the engine valve clearance. □ 7. Replace the [...]

  • Page 74

    74 -Husqvarna SER VICE JOURNAL Action Date, mtr reading, stamp, sign At Least Once Each Y ear 1. Clean the engine’s cooling air intake (25 hours). □ 2. Replace the air cleaner ’s pre-lter (foam) (300 hours). □ 3. Replace the air lter ’s paper cartridge. □ 4. Change the engine oil (50 hours). □ 5. Replace the engine oil lter ([...]

  • Page 75

    [...]

  • Page 76

    P/N 1 15 127127 IR 10/15/08[...]