Aigo PB2200 manuel d'utilisation

Part 1 FCC Notes: This equipment gen erates, uses, and can radi ate radio frequ ency energy and , if not installed and used in accordance with the instructions manual, ma y cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Ru les, which[...]

Part 2 ALERT TO OUR HONORABLE CUSTOMERS:  Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences.  This product contains inside a Lithium battery and maybe also a sealed type Lead aci[...]

Part 3 BRIEF INTRODUCTION THE USER’S MANUAL The purpose of this manual is to guide the u ser in the initial installation a nd general use of the Posi flex PB-2200 Pro series of POS terminals. It does not explain any app lication s oftware that m ay be supplied with it. We intend to provide our customers with all techno logy advantages available b[...]

Part 4 THE STANDARD FEATURES CPU: VIA C 7 1 GHz ; HDD: 40 GB or above; RAM: 25 6 MB DDR 2 upgradeable t o 2 GB m ax. Ethernet Networking: The st andard network port works with both 10 Base T and 100 Base T. Serial Ports: There are 4 serial ports in a PB- 2200 Pro sy stem. COM 1 is shared by th e dir ect dr iven cash draw er port and the UPS func ti[...]

Part 5 i) UPS Battery: 2.3 AH 12V lead acid maintenance f ree battery j) 2-in-1 Cash Dr awer Control Cable: Cable CCBLA-238, when added to the CR por t of the PB seri es, can be used t o control two Posiflex printer dri ve type cash dra wers. k) Cash drawer: Printer (Direct) drive type Po siflex cash drawers. Model numbers coded as CR-3 100, CR-320[...]

Part 6 INSTALLATION GUIDES IMPORTANT Please do not connect the power cord or turn on the main unit until you have fully read the inst al la t i on gui des and followe d the instructi o ns !! ! TECHNICAL ENHANCEMENTS Applicable te chnical enha ncement s in PB-2200 Pro series i nclude serial COM port power s upply settings, RTC battery rep lacement, [...]

Part 7 either in the top cover openi ng operation after pressi ng the 2 springs or by leaving or spilling an y improper materials inside after the opening operation. POWER ADAPTOR The power connect or resides in t he lower left corner of main connect or ar ea. Please make sure that the cable from the power adap tor is inserted into the power connec[...]

Part 8 WIRELESS LAN (OPTION) When the wireless LAN option is ordered with the PB system, this option is already in stalled in the delivery insid e the back cable cover with its cable connected to one of the USB port. This cable must be disconnected first if installed whenever th e back cabl e cover is opened for any operation. CUSTOMER DISPLAY (OPT[...]

Part 9 connection of a normal PS/2 key board or th e Posiflex prog rammable key board could become obligatory by some OS. Ther efore, if there will be no keyboard installed for such OS, it is advisory to use an USB int erface type barcode scanner instead of the PS/2 KB interface type. PRINTER (OPTION) There are many models of Posiflex POS printers [...]

Part 10 that comes with the preloaded operating system. Please follow the instructio n from your system integrator f or system / software rest oration. F ollow the instructions below for operating system recovery only if your system integrator does not a dvise other wise. For the PB system preloaded with Windows system on HDD, Posif lex provides re[...]

Part 11 USING THE PB SYSTEM BEFORE POWER ON – A Check List It is very important that you check the following op erational points: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. There must be at least 25 mm air clearance around any top or side ventilation holes with a free flow of air around the unit [...]

Part 12 appears, please replace the use d up UPS battery at power off as soon as possible. Emergency treatment: The battery is construc ted maintena nce free and leakproof. Its storage space in PB system also provides very good protection as long as the ambient temperature remains b elow 30 ° C and the ventilation of the PB system remains free. Ho[...]

Part 13 POWER ON/OFF CONTROL The PB terminal implem ents electr onic power control, such that the main powe r to the syst em may be c ontrolle d by many methods as below: 1. Hardware power sw itch 2. Software OFF command 3. Automa tic power ON c ontrol 4. Emergency power OFF Switching from OFF to ON requires a normal supply of the AC power. Hardwar[...]

Part 14 Emergency Power Off In case of serious system halt due to any reason, t he system could fail to be powered off t hrough normal mean s. Press and hold the Power ON/OFF Switch for Em ergency Powe r Off. Releas e the switch after the system powered off. It will take about 10 seconds. If there appears to give a sp ecial coded beep tone in the p[...]

Part 15 condition and env ironment temperature, check if the fan is stuck by contaminants such as dry grease or th reads and try to correct the situation when the s ystem is off and coo led down. You may pow er up the system aga in after the system cooled down and troub le cau se removed. H owever, i f the trouble remains, please consult your deale[...]

Part 16 It may be requi red to push the power switch down to completely remove the front cover. Cleaning for Front Ventilation Use vacuum cleaner to remove any dust or threads accumulation away from both the ventilation holes on fro nt cover and ventilation grids on chassis expose d after rem oval of the front c over. Replacing Front Cover Follow t[...]

Part 17 Cleaning for Side Ventilation Use vacuum cleaner to remove any dust or threads accumulation away from outsides of both ventilation grid s on chassis exposed after removal of the front cover as in pictures below and c lose back the top cover when done. Side Ventilation Grids on Chassis[...]

Part 18[...]

Part 19[...]

Part 20 警告使用者 這是甲類的資訊產品， 在居住的環 境中使用時， 可能會造成射頻干 擾，在這種情況下， 使用者會被要 求採取某些適當的對策。 T 3 14 5 4[...]