Tyco Electronics 3000 Series manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Tyco Electronics 3000 Series. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Tyco Electronics 3000 Series o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Tyco Electronics 3000 Series se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Tyco Electronics 3000 Series, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Tyco Electronics 3000 Series debe contener:
- información acerca de las especificaciones técnicas del dispositivo Tyco Electronics 3000 Series
- nombre de fabricante y año de fabricación del dispositivo Tyco Electronics 3000 Series
- condiciones de uso, configuración y mantenimiento del dispositivo Tyco Electronics 3000 Series
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Tyco Electronics 3000 Series no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Tyco Electronics 3000 Series y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Tyco Electronics en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Tyco Electronics 3000 Series, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Tyco Electronics 3000 Series, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Tyco Electronics 3000 Series. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    T ouchmonitor User Guide 1529L 15” LCD De sktop T ouchmonitor , 3000 series (Optional M agnetic Stripe Rea der , Barcode Sca nner , Customer Display a nd Biometric available) * Shown with optional peripherals[...]

  • Página 2

    Elo T ouchmonitor User Guide 15 " LCD Des ktop 1529L Revision E P/N 008603E Elo T ouchSyste ms. 1-800-ELOTOUCH www.elotouch.com[...]

  • Página 3

    Copyright © 2008 T yco Electronics. All Rights Reserved. No part of this publication may be reproduced, tra nsmitted, tra nscribed, stored in a retrieval system, or tra nslated into a ny la nguage or computer la nguage, in a ny form or by a ny mea ns, including, but not limited to, electronic, magnetic, optical, chemical, ma nual, or otherwise wit[...]

  • Página 4

    Cha pter 1 Introduction 1 Product Descri ption ................................................. 1 Detailed LCD Display Performa nce Requirements .......................................................... 2 Customer Display .............................................. 3 Seri al V ersion ................................................. 3 Fingerpr[...]

  • Página 5

    Appendix B T ouchmonitor Safety 45 Care a nd Ha ndling of Y our T ouchmonitor ........... 46 Appendix C T echnical Specification s 47 T ouchmonitor Specif ication s ......................... 48 AccuT ouch T ouchscreen Specif ication s ................................................ 49 IntelliT ouch T ouchscreen Specif ication s ...................[...]

  • Página 6

    C H A P T E R 1 I NTRODUCTION Product Description The 1529L is a retail terminal designed to present inf ormation to the operator a nd the customer . The 1529L is availa ble in seri al a nd USB versions or combo touch monitor . The 1529L consists of a 15.0” LCD main display with a touchscreen a nd the following optional peripherals: customer disp[...]

  • Página 7

    The credit card rea der rea ds all three stri pe s on a sta ndard credit card or drivers license. The credit card is rea d by sliding the credit card, stripe side toward the display through the credit card rea der forward or ba ckward. There is a USB credit card rea der only . The Hub provides 4 internal USB ports to be used by the credit card rea [...]

  • Página 8

    Customer Display The Customer Display is a twenty chara cter two line va cuum fluore scent display (VF D). It consists of a VF D a nd VF D controller . Serial V ersion Optional Para meters Chara cters per row 20 Number of rows 2 Chara cter 5x7 dot matrix configuration Chara cter He ight 9.5mm Chara cter width 6.2mm Chara cter ASCII configuration Ch[...]

  • Página 9

    Specifications Sensor SecuGen FOR Image Ca pture Speed 600ms/fra me Image T r a nsfer Speed 500Byte/ms Pixel Resolu tion 356x292 USB Signaling T ype Full Speed T ype Theory of Operation The USB host initi ates communication with the F DU01 using operation comma nds (Sensor LED On, Fingerprint Capture Start a nd Stop). Fingerprint data are then cap-[...]

  • Página 10

    5. Eff ective form fa ctor; ability to be mounted on side of ET1529L 6. USB interfa ce that complies with USB 2.0 sta ndards 7. USB bus powered 8. Easy communication between host a nd sca nner 9. V isible la ser diode operating at 650nm 10.600+ sca ns/sec 1-D sca nner: 1. Ability to rea d 1-D codes 2. Sca n a ngle M ini mum: 47º ± 3º 3. Low cost[...]

  • Página 11

    1-6 Elo T ouchmonitor User Guide[...]

  • Página 12

    C H A P T E R 2 I NST ALLA TION AND S ETUP This cha pter discusses how to install your LCD touchmonitor a nd how to install Elo T ouchSystems driver software. Unpacking Y our T ouchmonitor Check that the following ite ms are present a nd in good condition: T ouchmonitor USB Ca ble V ideo ca ble Power ca ble US/Ca ndi a n Europea n power ca ble D VI[...]

  • Página 13

    Product Overview Main U nit Note: Shown with optional Biometric & MSR. Re ar View Note: Shown with optional Rear Fa cing Customer Display . 2-8 Elo T ouchmonitor User Guide[...]

  • Página 14

    Side View Ba se Bottom View 2-9 or[...]

  • Página 15

    Kensington TM Lock The Kensington TM lock is a security device that prevents theft. T o find out more a bout this security device, do to http://www . kensington.com. 2-10 Elo T ouchmonitor User Guide[...]

  • Página 16

    USB Interface Connection Y our touchmonitor comes with only one touchscreen connector ca bles: USB ca ble. (For W indows 2000, Me a nd XP syste ms only .) T o set up the display , please ref er to the f ollowing figures a nd procedures: Remove the Ca ble Cover The ca bles are connected at the ba ck of the monitor. ca ble cover T o remove the cover [...]

  • Página 17

    C AUTION Before connecting the ca bles to your touchmonitor a nd PC, be sure that the computer a nd touchmonitor are turned off. N OTE Before conne cting the cables to the touchmonitor , route all the cables through the hole in the second a s shown in the picture above. 2-12 Elo T ouchmonitor User Guide[...]

  • Página 18

    The following illustrations guide you step by ste p in connecting your touchmonitor using a USB ca ble connection. Power cord Connect one end of the power cord to the monitor a nd the other end to wall. Connect the power ca ble to the power port in the monitor . 2-13[...]

  • Página 19

    V ideo ca ble Connect one end of the video ca ble to the rear side of computer a nd the other to the LCD. T ighten by turning the two thumb screws clockwise to ensure proper grounding. Y ou ca n select D VI video ca ble or D-SUB15 video cable. D VI ca ble 2-14 Elo T ouchmonitor User Guide[...]

  • Página 20

    Speaker ca ble Connect one end of the speaker ca ble to the speaker port in the computer a nd the other end to the port in the monitor. 2-15[...]

  • Página 21

    USB ca ble Connect one end of the USB ca ble to the rear side of the computer a nd the other to the LCD monitor. The USB ca ble is f or optional touch, MSR, CD a nd Finger Print Rea der . Only one USB ca ble is needed because the device contains a self powered USB 1.1 Hub. T wo self powered ports are availa ble f or running other USB devices. For t[...]

  • Página 22

    USB / SERIAL Interface Connection Y our touchmonitor comes with only one touchscreen connector ca bles: USB ca ble. (For W indows 2000, Me a nd XP syste ms only .) T o set up the display , please ref er to the f ollowing figures a nd procedures: Remove the Ca ble Cover The ca bles are connected at the ba ck of the monitor. ca ble cover T o remove t[...]

  • Página 23

    C AUTION Before connecting the ca bles to your touchmonitor a nd PC, be sure that the computer a nd touchmonitor are turned off. N OTE Before conne cting the cables to the touchmonitor , route all the cables through the hole in the second a s shown in the picture above. 2-18 Elo T ouchmonitor User Guide[...]

  • Página 24

    The following illustrations guide you step by ste p in connecting your touchmonitor using a USB ca ble connection. Power cord Connect one end of the power cord to the monitor a nd the other end to wall. Connect the power ca ble to the power port in the monitor . 2-19[...]

  • Página 25

    V ideo ca ble Connect one end of the video ca ble to the rear side of computer a nd the other to the LCD. T ighten by turning the two thumb screws clockwise to ensure proper grounding. Y ou ca n select D VI video ca ble or D-SUB15 video cable. D VI ca ble 2-20 Elo T ouchmonitor User Guide[...]

  • Página 26

    Speaker ca ble Connect one end of the speaker ca ble to the speaker port in the computer a nd the other end to the port in the monitor. 2-21[...]

  • Página 27

    USB ca ble Seri al cable For USB interfa ce, connect one end of the USB ca ble to the rear side of the computer a nd the other to the LCD monitor . For Seri al interfa ce, connect one end of the RS-232 ca ble to the rear side of the conputer a nd the other to the LCD monitor . 2-22 Elo T ouchmonitor User Guide[...]

  • Página 28

    Replace the Cable Cover Ca ble cover li p ca bles Then you have attached all the ca bles to the monitor , gently bring all the ca bles toward the sta ndard so they fit under the cover li p. Sna p the Ca ble cover in pla ce over the connections. 2-23[...]

  • Página 29

    Optimizing the LCD Display T o ensure the LCD display works well with your computer , configure the display mode of your gra phic card to make it less tha n or equal to 1024 x 768 resolution, a nd make sure the ti ming of the display mode is compatible with the LCD display . Refer to Appen- dix A f or more information a bout resolution. Compatible [...]

  • Página 30

    Magnetic Stri pe Re ader No device are needed. T e sting the USB MSR Keyboard Emulation 1 Plug in the device. 2 Open MS W ord. 3 Slide the card through the MSR to view the data. T e sting the USB-HID Cla ss MSR 1 On the CD, browse to T ouch Monitor Peri pheralsM agnetic Stri pe Card ReadersDe mo. 2 Open the Readme.txt a nd follow instructions to [...]

  • Página 31

    Convert MSR from keyboard e mulation to HID 1 T o convert from Keyboard Emulation mode to HID mode 1.1 Double-click on the “MSR Cha nge Mode” icon on the desktop. The following will a ppear: 1.2 The di m box will indicate the current setting. Click the “HID Mode” to switch to HID mode. 1.3 Click “Quit” to close the window. Re ar Fa cing[...]

  • Página 32

    2-27 Barcode Sca nner 1. Insert your Elo T ouchT ools CD. 2. On the CD, browse to T ouch Monitor Peri pheralsBarcode Sca nner StartupDrivers . 3. Double-click on USB7210.msi a nd follow the prompts given by the setup file. 4. Once you have finished installing the a bove: Right click on My Computer an d click on Properties . Click on the Hardware [...]

  • Página 33

    2) Now sca n the barcode below to cha nge your sca nning pattern. Using this sca nning pattern will allow you to rea d 2-D barcodes (you ca n still rea d 1-D barcodes also). The sca nner module also a dds a Hall Ef f ect Switch (HE Switch) that ena bles the unit to automatically set the T rigger mode of the Sca n Engine depending on the location of[...]

  • Página 34

    Installing the T ouch Driver Software Elo T ouchSystems provides driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM for the following operat- ing systems: • W indows XP • W indows 2000 • W indows Me • W indows 98 • W indows 95 • W indows NT 4.0 • CE 2.x, 3.0, 4x • W [...]

  • Página 35

    Installing the USB T ouch Driver In stalling the USB T ouch Driver for W indows XP , Windows 2000, Me a nd 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If W indows XP , W indows 2000,W indows 98, or W indows Me starts the Add New Hardware W izard: 2 Choose Next . Select “Search for the best driver f or your device (Recommended)?[...]

  • Página 36

    C H A P T E R 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will unlikely require a djustment. V ariations in video output a nd ap- plication may require a djustments to your touchmonitor to optimize the quality of the display. For best performa nce, your touchmonitor should be operating in native resolution, that is 1024 x 768 a[...]

  • Página 37

    5 4 3 2 1 15” LCD Function Key Controls Function 1 Power Switch T urns the display system power on or off . 2 Select Displays the OSD menus on the screen a nd used to select (“Clockwise” a nd “Counter-clockwise” direction) the OSD control options on the screen. 3 Adjusts the decrea sing value of the selected OSD control option. 4 Adjusts [...]

  • Página 38

    Controls and Adjustment OSD Lock/Unlock Y ou are a ble to lock a nd unlock the OSD feature. The monitor is shi pped in the unlocked position. T o lock the OSD: 1 Press the Menu button a nd button simulta neously for 2 seconds. A window will a ppear displaying “OSD Unlock”. Continue to hold the buttons down for a nother 2 seconds a nd the window[...]

  • Página 39

    OSD Control Options Brightne ss • Ba ckground Lumina nce of the LCD pa nel is a djusted. Contra st • Adjusts the contrast or the value s of color gain (RED, G REEN or BLUE). Sharp ne ss • The sharpne ss ca n be a djusta ble. Pha se • Adjusts the pha se of the dot clock. Auto Adjust • Clock system auto a djustment (under 5 seconds). OSD Le[...]

  • Página 40

    Power-Save (No In put) • The LCD pa nel background is cut when there is no signal input (AC line power consumption of 4w or less). Power LED Display & Power Saving General Power Saving Mode When the power switch are switch on , this LED lights in green . The LED indicates the dif ferent power status with altered LED colors when monitor operat[...]

  • Página 41

    CAUTION In order to protect the LCD, be sure to hold the ba se when adjusting the LCD, a nd ta ke care not to touch the screen. 3-36 Elo T ouchmonitor User Guide[...]

  • Página 42

    Controls and Adjustment OSD Lock/Unlock Y ou are a ble to lock a nd unlock the OSD feature. The monitor is shi pped in the unlocked position. T o lock the OSD: 1 Press the Menu button a nd button simulta neously for 2 seconds. A window will a ppear displaying “OSD Unlock”. Continue to hold the buttons down for a nother 2 seconds a nd the window[...]

  • Página 43

    3-38 Elo T ouchmonitor User Guide OSD Control Options Brightne ss • Ba ckground Lumina nce of the LCD pa nel is a djusted Contra st • Gain of R, G, a nd B signal is a djusted. Sharp ne ss • The sharpness ca n be a djusta ble. Pha se • The pha se of the dot clock is a djusted. Auto Adjust • Automatically a djusts the systems dot clock(take[...]

  • Página 44

    Recall Defaults • Restore all original fa ctory defaults. OSD Ti meout • Adjust how long the OSD menu is displayed. Input V ideo Select • Select D-SUB Analog, dvi Digital signal. V olume • T o increa se or decrea se the sound level. 3-39[...]

  • Página 45

    3-40 Elo T ouchmonitor User Guide[...]

  • Página 46

    C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor , refer to the following ta ble. If the problem persists, plea se conta ct your local dealer or our service center . Elo T echni- cal Support numbers are listed on the la st page of this ma nual. Solutions to Common Problems Proble m Suggestion(s) The monitor do[...]

  • Página 47

    4-42 Elo T ouchmonitor User Guide[...]

  • Página 48

    C H A P T E R A N A TIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD pa nel is designed to perf orm be st. For the Elo LCD touchmonitor , the native resolution is 1024 x 768 for the 15.0 inch size. In almost all ca ses, screen images look best when viewed at their native re solution. Y ou ca n lower the r[...]

  • Página 49

    As a n exa mple, a SV GA resolution LCD pa nel ha s 800 pixels horizontally by 600 pixels vertically . Input video is also repre sented by the same terms. XGA input video ha s a format of 1024 pixels horizontally by 768 pixels vertically . When the input pixels con- tained in the video input format match the native resolution of the pa nel, there i[...]

  • Página 50

    C H A P T E R B T OUCHMONIT OR S AFETY This ma nual contains information that is i mporta nt for the proper setup a nd maintena nce of your touchmonitor . Before setting up a nd powering on your new touchmonitor , rea d through this ma nual, especi ally Cha pter 2 (Installation), a nd Chapter 3 (Operation). 1 T o reduce the risk of electric shock, [...]

  • Página 51

    Care and Handling of Y our T ouchmonitor The f ollowing ti ps will help keep your Elo Entuitive touchmonitor functioning at the opti mal level. • T o avoid risk of electric shock, do not disa sse mble the brick supply or display unit ca binet. The unit is not user servicea ble. Re me mber to unplug the display unit from the power outlet before cl[...]

  • Página 52

    C H A P T E R C T ECHNICAL S PECIFICA TIONS Display Modes Y our Elo Entuitive touchmonitor is compatible with the following sta ndard video modes: Ite m Resolution T ype H. Sca n(KHz) V . Sc a n(Hz) Pol. 1 640X350 V G A 31.469 70.087 + / 2 720X400 V G A 31.469 70.087 - / + 3 640X480 V G A 31.469 59.940 - / 4 640X480 VESA72 37.861 72.809 -/ 5 640X48[...]

  • Página 53

    T ouchmonitor Specifications Model 1529L LCD Display 15.0” TFT Active M atrix Pa nel Display Size 304.1(H) x 228(V) mm Pixel Pitch 0.297(H) x 0.297(V) mm Display Mode V GA 640 x 350 (70 Hz) V GA 720 x 400 (70 Hz) V GA 640 x 480 (60 / 72 / 75 Hz) SV GA 800 x 600 (56 / 60 / 72 / 75Hz) XGA 1024 x 768 (60 / 70 / 75Hz) Native XGA 1024 x 768 Contrast R[...]

  • Página 54

    AccuT ouch T ouchscreen Specification s Mecha nical Construction T op: Polyester with outside hard-surfa ce coating with clear or a ntiglare finish. Inside: T r a nsparent conductive coating. Bottom: Glass substrate with unif orm resistive coating. T op a nd bottom layers separated by Elo-patented se parator dots. Positional Accuracy Sta ndard devi[...]

  • Página 55

    IntelliT ouch T ouchscreen Specification s Mecha nical Positional Accura cy Sta ndard devi ation of error is less tha n 0.080 in. (2.03 mm). Equate s to less tha n ±1%. T ouchpoint Density More tha n 100,000 touchpoints/in2 (15,500 touchpoints/cm2). T ouch Activation Force T ypically less tha n 3 ounces (85 gra ms). Surfa ce Durability Surfa ce du[...]

  • Página 56

    Infrared T ouchscreen Specification s Mecha nical Input Method Input Method Finger or gloved ha nd activation Electrical Positional Accuracy T ypical centroid accura cy: 2 mm with 1 mm ST D error Resolution T ouchpoint density is ba sed on controller resolution of 4096 x 4096 T ouch Activation For ce No minimum touch a ctivation force is required C[...]

  • Página 57

    C-52 Elo T ouchmonitor User Guide Acoustic Pulse Recognition Spe cification MECHANICAL Input method Finger , finger nail, gloved ha nd, or stylus a ctivation ELECTRICAL Position accura cy 1% max. error Resolution a ccura cy T ouchpoint density is based on controller resolution of 4096 x 4096 T ouch activation for ce T ypically 2 to 3 ounces (55 to [...]

  • Página 58

    15” LCD T ouchmonitor(ET1529L-XXXA-1-XX-T -G) Dimensions 15” LCD T ouchmonitor(ET1529L-XXXA-1-XX-G) Dimensions C-53[...]

  • Página 59

    C-54 Elo T ouchmonitor User Guide[...]

  • Página 60

    REGULA T OR Y INFORMA TION I. Electrical Safety Information: A) Compli a nce is required with respect to the voltage, frequency , a nd current require- ments indicated on the ma nufa cturer’s la bel. Connection to a different power source tha n those specified herein will likely re sult in i mproper operation, da mage to the equi p- ment or pose [...]

  • Página 61

    This Information T echnology Equipment (ITE) is required to have a CE M ark on the ma nufa cturer’s la bel which mea ns that the equi pment ha s been tested to the following Directive s a nd Sta ndards: This equi pment ha s been tested to the requirements f or the CE M ark a s required by EMC Directive 89/336/EEC indicated in Europea n Sta ndard [...]

  • Página 62

    57 "The a pplication of this monitor is restricted to speci al controlled luminous environments.The screen surfa ce trend to reflect a nnoying light of la mps a nd sunlight. T o avoid these reflections the monitor should not be positioned in front of a window or directed to luminaries. The monitor is in compli a nce with Reflection Cla ss III [...]

  • Página 63

    58 Elo T ouchmonitor User Guide[...]

  • Página 64

    W ARRANTY Except a s otherwise stated herein or in a n order a cknowledgment delivered to Buyer, Seller warra nts to Buyer that the Product shall be free of defects in materi als a nd workma nshi p. W ith the exception of the negoti ated warra nty periods; the warra nty for the touchmonitor a nd components of the product is 2 years. Seller makes no[...]

  • Página 65

    THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF W ARRANTY . EXCEPT FOR THE EXPRESS W ARRANTY SET FOR TH ABOVE, SELLER G RANTS NO OTHER W ARRANTIES, EXPRESS OR IMPLIED BY ST A TUTE OR OTHER WISE, REGAR DING THE PRODUCTS, THEIR FIT NESS FOR ANY PURPOSE, THEIR QUALITY , THEIR MERCHANT ABILITY , THEIR NONINFRINGEMENT , OR OTHER W[...]

  • Página 66

    Numerics 15.0" LCD T ouchmonitor (1529L-XXW A-1-G) Dimensions, 53 A About T ouchmonitor Adjustments, 31 AccuT ouch T ouchscreen Specifications, 49 Acoustic Pulse Re cognition Specification, 52 Auto Adjust, 34 B Barcode Sca nner , 4,28 Ba se Bottom View , 9 Brightness, 34 C Care and Ha ndling of Y our T ouchmonitor , 46 Chemical Re sistance, In[...]

  • Página 67

    N Native Resolution, 47 O Omni-directional sca nner , 4 Optical, AccuT ouch, 53 Optical, IntelliT ouch, 54 Optical, IR, 55 Optimizing the LCD Display , 24 OSD Control Options, 38,42 OSD Left/Right, 38,42 OSD Lock/U nlock, 37,41 OSD Menu Functions, 37,41 OSD Position, 38,42 OSD Ti meout, 39,43 OSD Up/Down, 38,42 P Pha se, 38,42 Positional Accura cy [...]

  • Página 68

    Check out Elo’s Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers • Touchmonitor Newsletter Getting in T ouch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.elotouch.com or simply call t[...]

  • Página 69

    LCD Touchmonitor /1529L Power Cord A Power Cord B Compact Disc VGA Cord Serial Cord Audio Cord Recommended Disassembly Sequence DVI CORD USB Cord[...]

  • Página 70

    USB I NTELLIHEAD FOR SWIPE READERS TEC HNICA L REFER ENCE M A NU A L Manual P art Number 99875320-1P OCTOBER 20 04 PRELIMIN A R Y REGISTERED TO ISO 9001:2000 20725 South Annalee Avenue Carson, CA 90746 Phone: (310) 631-8602 FA X: (3 10) 631- 3956 Technical Support: (651) 41 5-6800 www.magtek.com[...]

  • Página 71

    ii Copyright © 200 4 MagTe k ® , In c. Printe d in the Un ited State s of America Informa tion in this docu ment i s subject t o change w ithout not ice. N o part of this doc ument m a y be reproduced or transmit ted in any for m or by an y means, electronic or mechanical, for any purpose , without the e xpress written permission of M agTek, Inc.[...]

  • Página 72

    iii Limited Warran ty MagTek , Inc. w arrants tha t the P roduct de scribed i n this document is free o f defect s in mat erials and workm anship f or a pe riod o f one y ear from the d ate of purchase where the d ate of purch ase is defined as the date of shipm ent from MagTek . Dur ing this warranty period, M agTek shall, at their op tion, repa i[...]

  • Página 73

    iv FCC WAR NING STA TEMEN T Thi s equ ipment has be en test ed a nd foun d to compl y wit h the l imits fo r Clas s B digi tal device, pur suan t to Part 15 of FCC Rules. These limits a r e d esigned to prov ide reasona ble prote ction ag ainst harmf ul inte r feren ce whe n the equ ipme nt is o perat ed in a resid entia l en viro nment. This equi [...]

  • Página 74

    v TABLE OF CON TENTS SECT ION 1. FEA TURES A N D SPECIFICA TIONS . ........ ........ ......... ........ ...... ........ ........ ........ ......... ........ 1 FEATU RES . ........ ...... ........ ......... ........ ........ ......... ..... ........ ......... ........ ........ ......... ..... ......... ........ ........ ... 1 CONF IGURATIONS .. ....[...]

  • Página 75

    vi Figure 1-1. 3-Trac k USB IntelliHead[...]

  • Página 76

    1 SECTI ON 1 . FEA TU RES A ND SPE CIFICA TIONS The USB (U niversal Serial Bus) IntelliH ead Swip e Reader is a co mpact magneti c stripe card reader that conforms to ISO standards. The Reader is compatible with an y device with a USB interface. A c ard is read by slidin g it past the h ead either f orward or b ackward. The reader conforms to the U[...]

  • Página 77

    USB IntelliHead S w ipe Read er 2 CONFIGUR ATIONS The Config urations are as follows: Table 1 -1. Configurations ACCESS ORIES The accessories are as follows: Part Number Description 21042806 USB MSR Demo Program with Source Code (Diskette) 99510026 USB MSR Demo Program with Source Code (W EB) REFERENCE DOCUMEN TS MagTe k Magnetic Card Reader Design[...]

  • Página 78

    Section 1. F eatures and Sp ecifi cations 3 SPECIFICAT IONS Table 1-2 lists the spec ifications for the USB IntelliHea d. Figure 1- 2 shows the dimensi ons for the standa rd product. Table 1-1. Specif ications Reference Standards ISO 7810 and ISO 7811 and AAMVA* Power Input 5V from U SB bus Recording Method Two-frequency coherent phase (F 2F) Messa[...]

  • Página 79

    USB IntelliHead S w ipe Read er 4[...]

  • Página 80

    5 SECTION 2. IN STALLATION This section describes th e cable connection, the Windows Plug and Pla y Setup, and the ph ysical mounting of the unit. USB CONNECTI ON Since the USB In telliHe ad is supplied as an OEM product, the installation and sy stem inte gr ation will be uniq ue for each a pplic ation. The reade r module must be a ttached to an ap[...]

  • Página 81

    USB IntelliHead S w ipe Read er 6[...]

  • Página 82

    7 SECTI ON 3. OPE R A TION C AR D RE AD A card may be swiped past the rea d head at an y time. The ma gnetic stripe must face toward the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the results to the host via a USB HID input report. After the r esults are[...]

  • Página 83

    USB IntelliHead S w ipe Read er 8[...]

  • Página 84

    9 SECT ION 4. USB C OMMUN IC ATIONS This device conforms to the USB specifi cation revisi on 1.1. This device also conforms with the Human Interface Device (H ID) class specification version 1.1. The device communicates to the host as a vendor-defined HID device. The details about how the card data and commands are structured into HID reports follo[...]

  • Página 85

    USB IntelliHead S w ipe Read er 10 followin g table. The us age types ar e also listed. These usage t ypes are de fined in the H ID Usage Tables document. Magnetic Strip e Reader usage page 0x ff00: Usage ID (Hex) Usage Name Usage Ty pe Report Ty pe 1 Decoding reader de vice Collection None 20 Track 1 de code status Data Input 21 Track 2 de code st[...]

  • Página 86

    Section 4. USB Communications 11 Item Val ue (Hex) Input (Data, Variabl e, Absolute, Buffered Bytes) 82 02 01 Usage (Command message) 09 20 Report Count (24) 95 18 Feature (Dat a, Variable, Absolute, B uffered By tes ) B2 02 01 End Collection C0 C AR D D A TA Card dat a is only sent to the host on the Inte rrupt In pipe using an Input Repor t. The [...]

  • Página 87

    USB IntelliHead S w ipe Read er 12 TRACK 1 DEC ODE STATUS Bits 7-1 0 Value Reserved Error This is a one-byte value, which indicat es the statu s of decodin g track 1. Bit positi on zero indicat es if there was an error decodin g track 1 if the bit is set to one. If it is zero, then no error occur red. If a track has data on it that is not noise, an[...]

  • Página 88

    Section 4. USB Communications 13 CA RD EN CODE TY PE This one-b yte value indic ates the type o f encodin g that was fou nd on the c ard. The fol lowing table defines the possible values. Value Encode T y pe Description 0 ISO/ABA ISO/ABA encode format 1 AAMVA AAMVA encode format 2 reserved 3 Blank The card is blank. 4 Other The card has a non-stand[...]

  • Página 89

    USB IntelliHead S w ipe Read er 14 COMM ANDS Most ho st applicatio ns do not need to send commands to the devi ce. Most host applic ations only need to obtain ca rd data f rom the device as desc ribed previou sly in this section. This section of t he manual can be i gnored b y an yone who d oes not need to send commands to the device. Comman d requ[...]

  • Página 90

    Section 4. USB Communications 15 RESUL T CODE This one-b yte field conta ins the value of the resu lt code. Th ere are two t ypes of resu lt codes: generic result codes an d command-sp ecific result codes. Generic result codes alwa ys have t he most significant bit set to zero. Generic result codes have the same meaning for all commands and can be [...]

  • Página 91

    USB IntelliHead S w ipe Read er 16 Property ID is a one -byte field th at contains a value t hat identifies the propert y. The following table lists all the current propert y ID values: Value Propert y ID D escription 0 SOFTWARE_ID T he device’s software identifier 1 SERIAL_NUM The device’s seria l number 2 POLLING_INTERVAL The interrupt pipe?[...]

  • Página 92

    Section 4. USB Communications 17 SERIAL_NUM PROPERTY Propert y ID: 1 Property T y pe: String Le ngth: 0 – 15 byte s Get Propert y : Yes Set Propert y: Yes Default Value: The defaul t value is no string with a len gth of zero . Description: The value is an ASCII strin g that represents th e device’s serial numb er. This stri ng c an be 0 – 15 [...]

  • Página 93

    USB IntelliHead S w ipe Read er 18 rate decreases the USB bus bandwid th used by the device. This propert y is stored in no n-volatile EEPROM memory so it w ill not change when the unit is power cycled. The val ue of this propert y, if any, will be sent to the host when the host requests the devi ce’s USB en dpoint desc riptor. W h en this p rope[...]

  • Página 94

    Section 4. USB Communications 19 01 02 03 08 Example Set MAX_PACKET_ SIZE propert y Res ponse (Hex): Result Code Data Len Data 00 00 Example Get MAX_PAC KET _ SIZE propert y Request (Hex): Cmd Num Da ta Len Prp ID 00 01 03 Example Get MAX_PAC KET _ SIZE propert y Response (Hex ): Result Code Data L en Prp Value 00 01 08 INTERFACE_TY PE PROPERTY Pro[...]

  • Página 95

    USB IntelliHead S w ipe Read er 20 Result Code Data L en Prp Value 00 01 00[...]

  • Página 96

    21 SECTI ON 5. DEMO PROGRAM The demo p rogram, which is w ritten in Visua l Basic , ca n be used to do the follow ing: • Read cards from the devi ce and view the card data • Send command r equests to t he devi ce and view the c ommand re sponses • Guide appli cation devel opers in their appli cation d evelopment b y providing ex amples, in so[...]

  • Página 97

    USB IntelliHead S w ipe Read er 22 SOURC E C ODE Source code is included w ith the d emo pr ogram. I t can be used a s a guide for a pplication devel opment. It is desc ribed in deta il, with comments , to assist develop ers. The book USB Complete by Jan Axelson is also a good guide for application developers, especiall y the chapter on Human Inter[...]

  • Página 98

    23 A PPENDIX A. USB INTELLIHEAD SW IPE READER The f ollowing drawing is prov ided in this se ction: Part Number Titl e 2103000 6 USB-HID INTHD 3TK 125MM W RE, 5P CONN[...]

  • Página 99

    ASM210300XX REV.X CONNECTOR MOLEX 51021-0500 TERMINAL MOLEX 50058-8000 P1 PIN1 440.0 +/- 6mm J1-2 WHITE J1-1RED GREEN J1-3 BLACK J1-4 SHIELD WIRE J1 COLOR SIGNAL P1 CONN 1 2 3 4 1 2 3 4 5 VBUS D - D + GND HEAD CASE RED WHITE GREEN BLACK SHELD USB HID 3-Trac k , 440mm Wire , 5PIN Connector PITCH=1.25mm[...]

  • Página 100

    iv FCC WAR NING STA TEMEN T T his equ ip ment has be en tes te d and fou nd to com pl y wi th th e limit s for C lass B di gita l devi ce, p urs uant to Part 15 of FCC Rules. These limits a r e d esigned to prov ide reasona ble prote ction ag ainst harmf ul inte r feren ce whe n the equ ipme nt is o perat ed in a resid entia l en viro nment. This e[...]

  • Página 101

    Preliminar y to Rev 1 10/20/2004 7:30:02 A M USB I NTELLIHEAD KE YBO AR D EM UL AT IO N FOR SWIPE READERS TEC HNICA L REFER ENCE M A NU A L Manual P art Number 99875321-1P OCTOBER 20 04 PRELIMIN A R Y REGISTERED TO ISO 9001:2000 20725 South Annalee Avenue Carson, CA 90746 Phone: (310) 631-8602 FAX : ( 31 0) 63 1-3 95 6 Technical Support: (651) 41 5[...]

  • Página 102

    ii Cop yrigh t © 2004 MagTe k ® , In c. Printe d in the Un ited State s of America Informa tion in this docu ment i s subject t o change w ithout not ice. N o part of this doc ument m a y be reproduced or transmit ted in any for m or by an y means, electronic or mechanical, for any purpose , without the e xpress written permission of M agTek, Inc[...]

  • Página 103

    iii Limited Warran ty M agTek , Inc. warran ts that the Produc t described in this documen t is free of defect s in materials and workm anship f or a pe riod o f one y ear from the d ate of purchase where the d ate of purch ase is defined as the date of shipm ent from MagTek . Dur ing this warranty period, M agTek shall, at their op tion, repa ir o[...]

  • Página 104

    v TABLE OF CON TENTS SECT ION 1. FEA TURES A N D SPECIFICA TIONS . ........ ........ ......... ........ ...... ........ ........ ........ ......... ........ 1 FEATU RES . ........ ...... ........ ......... ........ ........ ......... ..... ........ ......... ........ ........ ......... ..... ......... ........ ........ ... 1 HARD W ARE CONF I GURA [...]

  • Página 105

    vi Figure 1-1. 3-Trac k USB Keyboard E mulation IntelliHead[...]

  • Página 106

    1 SECTI ON 1 . FEA TU RES A ND SPE CIFICA TIONS The USB (U niversal Serial Bus), HID Keyboard Emulatio n, Swipe Reade r is a co mpact magnetic s tripe card re ader, which con forms to ISO standards . The R eader is compatible wit h the PC series of personal computers and emulates the operation of a keyboard. A card is read by sliding it p ast the h[...]

  • Página 107

    USB HID Keyboard Emulation Swipe Reader 2 The hardwa re config urations a re sh own in Table 1- 1. Table 1 -1. Configurations ACCESS ORIES The accessories are as follows: Part Number D escription 21042806 USB MSR Demo Prog ram with Source Code (Diskette) 99510026 USB MSR Demo Prog ram with Source Code (WEB) REFERENCE DOCUMEN TS MagTe k Magnetic Car[...]

  • Página 108

    Section 1. F eatures and Sp ecifi cations 3 SPECIFICAT IONS Table 1-2 lists the spec ifications for the USB IntelliHea d. Figure 1- 2 shows the dimensi ons for the stand ard product. Table 1-2. Specif ications Reference Standards ISO 7810 and ISO 7811 and AAMVA* Power Input 5V From USB b us Recording Method Two-frequency coherent phase (F 2F) Messa[...]

  • Página 109

    USB HID Keyboard Emulation Swipe Reader 4[...]

  • Página 110

    5 SECTION 2. IN STALLATION This section describes th e cable connection, the Windows Plug and Pla y Setup, and the ph ysical mounting of the unit. USB CONNECTI ON Since the USB In telliHe ad is supplied as an OEM product, the installation and sy stem inte gr ation will be uniq ue for each a pplic ation. The reade r module must be a ttached to an ap[...]

  • Página 111

    USB HID Keyboard Emulation Swipe Reader 6[...]

  • Página 112

    7 SECTI ON 3. OPE R A TION C AR D RE AD A card may be swiped past the rea d head at an y time. The ma gnetic stripe must face toward the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the results to the host via a USB HID input report. After the results are [...]

  • Página 113

    USB HID Keyboard Emulation Swipe Reader 8[...]

  • Página 114

    9 SECT ION 4. USB C OMMUN IC ATIONS This device conforms to the USB specifi cation revisio n 1.1. This device also conforms with the Human Interface Device (H ID) class specification version 1.1. The device communicates to the host as a H ID ke yboard device. The l atest versio ns of the W indows operatin g s ystems co me with a standard Windows US[...]

  • Página 115

    USB HID Keyboard Emulation Swipe Reader 10 MSR ( Non-Keyboa rd Emul ation Ve rsion). Pl ease refer to Techn ical Ma nual 99875320 for further information regarding the USB IntelliHead HID reader. The device’s programmab le configuration o ptions affe ct the format o f the card dat a. The card data fo rmat for t he default conf iguration is as fol[...]

  • Página 116

    Section 4. USB Communications 11 PROGR A M M A BLE C ONFIGUR ATION OP TIONS This device h as a numb er of pro grammable confi guration properti es. These properties are stored in non-vol atile EEPR OM memory. These properties can be configured at the fa ctory or by the end user using a prog ram supplied by MagTek . Pro g ramming the se parameters r[...]

  • Página 117

    USB HID Keyboard Emulation Swipe Reader 12 REPOR T DESCRIPTOR The HID report descript or i s stru ctured as follo ws: Item Val ue(Hex) Usage Page (Generic Desktop) 05 01 Usage (Keyboard) 09 06 Collection (Application) A1 01 Usage Page (Key Codes) 05 07 Usage Minimum (224) 19 E0 Usage Maximum (231) 29 E7 Logical Minimum (0) 15 00 Logical Maximum (1)[...]

  • Página 118

    Section 4. USB Communications 13 COMM ANDS Comman d reques ts and re sponses a re sent to and rec eived from the d evice using featur e reports. Command requ ests are sent to the device usi ng the H ID class sp ecific request Set_Report. Th e response to a command i s retrieved from the devi ce usin g the HID class specific r equest Get_Report. The[...]

  • Página 119

    USB HID Keyboard Emulation Swipe Reader 14 RESUL T CODE This one-b yte field conta ins the value of the resu lt code. Th ere are two t ypes of resu lt codes: generic result codes an d command-sp ecific result codes. Generic result codes alwa ys have t he most significant bit set to zero. Generic result codes have the same meaning for all commands a[...]

  • Página 120

    Section 4. USB Communications 15 Property ID is a one -byte field th at contains a value t hat identifies the propert y. The following table lists all the current propert y ID values: Value Prop ert y ID Description 0 SOFTWARE_ID The device’s software identifier 1 SERIAL_NUM The device’s serial number 2 POLLING_INTERVAL The interrupt pipe’s p[...]

  • Página 121

    USB HID Keyboard Emulation Swipe Reader 16 SERIAL_NUM PROPERTY Propert y ID: 1 Property T y pe: String Le ngth: 0 – 15 byte s Get Propert y : Yes Set Propert y: Yes Default Value: The defaul t value is no string with a len gth of zero . Description: The value is an ASCII strin g that represents th e device’s serial numb er. This stri ng c an be[...]

  • Página 122

    Section 4. USB Communications 17 bus bandwidt h used b y the device, and slowin g down the card d ata transfer rate decreases the USB bus bandwid th used by the device. This propert y is stored in no n-volatile EEPROM memory so it w ill not change when the unit is power cycled. The value of this propert y, if an y, will be sent to the host when the[...]

  • Página 123

    USB HID Keyboard Emulation Swipe Reader 18 TRACK_DATA_ SEND _FLAGS PR OPERTY Propert y ID: 4 Propert y T y pe: By t e L engt h: 1 by te Get Propert y : Yes Set Propert y: Yes Default Value: 63 (hex ) Description: This propert y is defined as follows: 0 SS ES LRC 0 LC Er Er SS 0 – Don’t send Start Sentinel for each tr ack 1– Se nd Start Sentin[...]

  • Página 124

    Section 4. USB Communications 19 TERMI NAT I ON_CH AR PROPERTY Propert y ID: 5 Propert y T y pe: By t e L engt h: 1 by te Get Propert y : Yes Set Propert y: Yes Default Va lue: 0D (hex ) (ca rriage re turn) Description: This propert y is defined as follows: mod c c c c c c c mod 0 – Send c after card data 1– S end c after each track c 1-127 –[...]

  • Página 125

    USB HID Keyboard Emulation Swipe Reader 20 SS_TK3_ISO_A B A PROPER TY Propert y ID: 8 Propert y T y pe: By t e L engt h: 1 by te Get Propert y : Yes Set Propert y: Yes Default Value: 2B (hex) ‘+’ Description: This character is sent as t he track 3 sta rt senti nel for cards t hat have t rack 3 encoded in ISO/ABA f ormat. If the v alue is 0 no c[...]

  • Página 126

    Section 4. USB Communications 21 This propert y is stored i n non-volati le EEPROM memor y so it will not chan ge when the un it is power cycled. When this propert y is changed, th e unit must be power cycled to have these changes tak e effect. If a value other th an the def ault val ue is desired, it can be s et by the fact ory upon requ est. PRE_[...]

  • Página 127

    USB HID Keyboard Emulation Swipe Reader 22 PRE_TK_CHAR PROPER TY Propert y ID: 13 (0D hex) Propert y T y pe: By t e Len g th: 1 b yt e Get Propert y : Yes Set Propert y: Yes Default Value: 0 Description: This character is sent prior to the data for each track. If the v alue is 0 no character is sen t. If t he value is in the ran ge 1 – 127 th en [...]

  • Página 128

    Section 4. USB Communications 23 accord in g to a Uni ted S tat es ke yboa rd ke yma p. F or ex ample , to tran smit the ASCII character ‘?’ (063 decimal), the character is looked up in a keymap. For a United States key board key map, th e ‘/’ (forwa rd slash) key com bined with the left shift key modifier are stored in the key map to repre[...]

  • Página 129

    USB HID Keyboard Emulation Swipe Reader 24 Description: The v alue is a b yte that r epresents the d evices inter face t y pe. Th e value ca n be set to 0 fo r the HID interfac e or to 1 for the keyboa rd emulat ion interface. When the value is set to 0 (HID) the device will behave as described in the HID man ual. When th e val ue is set to 1 (ke y[...]

  • Página 130

    25 SECTI ON 5. DEMO PROGRAM The purp ose of this dem o pro g ram is not to demo nstrate car d reading with this HI D keyboard emulation device. Use a tex t editor application such as Windows Notepad to demonstrate card read ing for this HID k e yb oard emul ation de vice. Any applicati on that allows us er input from a keybo ard s houl d be suf fi [...]

  • Página 131

    USB HID Keyboard Emulation Swipe Reader 26 • Enter a command in the Message edit box. All data entered should be in hexadecimal bytes with a space between each b y te. Enter the com mand number followed by the command data if there is any. The appl ication wil l automatically calculate and send the com mand data leng th for yo u. For e xample, t [...]

  • Página 132

    27 A PPENDIX A. USB INTELLIHEAD SW IPE READER The f ollowing drawing is prov ided in this se ction: Part Number Titl e 2103000 7 USB- KB INTHD 3TK 125M M WRE, 5P CONN[...]

  • Página 133

    ASM210300XX REV.X CONNECTOR MOLEX 51021-0500 TERMINAL MOLEX 50058-8000 P1 PIN1 440.0 +/- 6mm J1-2 WHITE J1-1RED GREEN J1-3 BLACK J1-4 SHIELD WIRE J1 COLOR SIGNAL P1 CONN 1 2 3 4 1 2 3 4 5 VBUS D - D + GND HEAD CASE RED WHITE GREEN BLACK SHELD USB HID 3-Trac k , 440mm Wire , 5PIN Connector PITCH=1.25mm[...]

  • Página 134

    INSTALLATION GUIDE LD9000U series User Manual available at our web site www.logicc ontrols.com USB Interface Customer Pole Displays LD9000U, LD9200U, LD9 300U, LD9400U, LD9500U, LD9900U, LD9000XU, LD9200XU, LD93 00XU, LD9400XU, LD9500XU and LD9900XU HARDWARE INSTALLATION Your LD9000U family of pole displays has been pre-assembled to make the instal[...]

  • Página 135

    Logic Controls, Inc. SOFTWARE COMMANDS Logic Controls pol e displays are controll ed by command codes and data from the co mputer. Commands are transmitted to t he pole display as ASCII co des. The command codes liste d below are expressed i n hexadecimal (base 16) numbers encl osed inside angle brackets < >, in decimal numbers enclosed in pa[...]

  • Página 136

    i Customer Displays 2 by 20 character display USER MANUAL Models: LD9000 Series[...]

  • Página 137

    ii NOTICE The manufacturer of the POS pole display makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages. Information in this document is subject t[...]

  • Página 138

    iii TABLE OF CONTENTS FEATURES ..................................................................................... 1 MODEL IDENTIFICATION ............................................................ 2 CARTON CONTENTS ................................................................... 2 INSTALLATION ................................................[...]

  • Página 139

    1 FEATURES The LD9000 family of pole displays offers a wide range of high quality features and models to choice from. Listed below are the features incorporated into each pole display. Not all features are available in all models. The model identification chart will assist you in selecting the model best suited to your needs. Features - All Models [...]

  • Página 140

    2 MODEL IDENTIFICATION LD9 __ __ __ - __ __ X = Double Sided Display PT = Pass Thru 25 = DB25F connector to computer POWER ADAPTER 0 = 120VAC* COMMAND SET 1 = 220VAC 0 = LOGIC CONTROLS* 1 = LOGIC CONTROLS SERIAL/PARALLEL INTERFACE WITH PASS-THRU 0 = SERIAL 9600 BAUD* 2 = SPECIAL COMMAND SET 1 ( Aedex emulation) 1 = SERIAL 600 BAUD 3 = SEPCIAL COMMA[...]

  • Página 141

    3 INSTALLATION Your PD9000 family of pole displays has been pre-assembled to make the installation as simple as possible. Serial Interface Non-pass-thru Models Installation 1. Mount the pole display to the metal base plate using the mounting hardware provided. 2. The pole display can be used in a freestanding mode or attached to the counter using t[...]

  • Página 142

    4 Serial Interface Pass-thru Models Installation 1 Mount the pole display to the metal base plate using the mounting hardware provided. 2 The pole display can be used in a freestanding mode or attached to the counter using the remaining mounting hardware. 3 Connect the DB25M connector to the peripheral device or a serial pass-thru terminator (optio[...]

  • Página 143

    5 FUNCTIONAL TEST The following test sequence will verify that your pole display is working properly. Before you start this procedure, you must install the pole display correctly as outlined under the INSTALLATION section. The functional test should be done under MSDOS command prompt by booting up the computer in DOS mode, or shell out to DOS promp[...]

  • Página 144

    6 LD9100-PT, LD9300-PT, LD9400-PT and LD9500-PT 1. Type “ABCDEFGH” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “ ^A PASSTHRU” ( ^A is entered as Ctrl-A ) and press ENTER key. The data will be passed through to the peripheral (e.g. a printer). These characters are not shown on the display. 3. Type “[...]

  • Página 145

    7 LD9190-PT, LD9390-PT, LD9490-PT and LD9590-PT 1. Type “ECHO ABCDEFGH>LPT1” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “ECHO ^A PASSTHRU>LPT1” ( ^A is entered as Ctrl-A) and press ENTER key. The data will be passed through to the peripheral (e.g. a printer). These characters are not shown on [...]

  • Página 146

    8 INTERFACE CONNECTION Serial Interface Connector Configuration The pin out configuration for the standard serial pole display is a DB9F connector. It plugs directly into the serial port of the computer. 1. DCD (tied to pins 4&6) 2. NC 3. TXD from PC 4. DTR (tied to pins 1&6) 5. Ground 6. DSR (tied to pins 1&4) 7. RTS (tied to pin 8) 8.[...]

  • Página 147

    9 Parallel Interface Connector Configuration All standard parallel pole displays will have a DB25 male connector. It is connected to the printer port of the computer. 1. –Strobe 2. Data 0 3. Data 1 4. Data 2 5. Data 3 6. Data 4 7. Data 5 8. Data 6 9. Data 7 10. – Ack 11. Busy 12-17 NC 18-25 Ground For pass-through models, the display cable come[...]

  • Página 148

    10 SOFTWARE COMMANDS Logic Controls pole displays are controlled by command codes and data from the computer. The model of pole display that you have will determine which command set works with your pole. Refer to the model identification chart for further information. Commands are transmitted to the pole display as ASCII codes. The command codes l[...]

  • Página 149

    11 7. Carriage R eturn <0D>, (13), {^M}: The cursor moves to the left most digit of the row it is in. 8. Digit Select <10>, (16), {^P}: Moves the cursor to any position on the display with this command followed by a data byte of <00> to <27>, or in decimal (00) to (39). 9. Cursor On <13>, (19), {^S}: Turns on the curso[...]

  • Página 150

    12 17. Both Side Display <1B><0C>, (27)(12), {^[ ]{^L}: After this command, all messages followed are displayed on both sides of double sided displays. 18. Front Sid e Display <1B><0E>, (27)(14), {^[ ]{^N}: After this command, all messages followed are displayed only on front side of double sided displays. 19. Back Side Disp[...]

  • Página 151

    13 PASS-THRU COMMAND SET (LD9100-PT, LD9100X-PT): All software commands of the non-pass-thru single sided model are available with following additional commands for pass-thru and double-sided display control. When power is turned on or after a reset command has been initiated, all text is displayed on the pole display. Extended Pass-thru Command Se[...]

  • Página 152

    14 HARDWARE CONFIGURATION Serial pole displays were factory configured for serial RS232C interface using the following protocol: · 9600 Baud Rate · 8 Data Bits · 1 Stop Bit · No Parity Other optional baud rates are available with factory settings. Refer to the model identification chart for further information.[...]

  • Página 153

    15 DISPLAY CHARACTER CODES D7 0 0 0 0 0 0 0 0 D6 0 0 0 0 1 1 1 1 D5 0 0 1 1 0 0 1 1 D4 0 1 0 1 0 1 0 1 D 3 D 2 D 1 D 0 0 1 2 3 4 5 6 7 0000 0 DP SP 0 @ P ‘ p 0001 1 DC 1 ! 1 A Q a q 0010 2 DC 2 " 2 B R b r 0011 3 DL DC 3 # 3 C S c s 0100 4 DI M DC 4 $ 4 D T d t 0101 5 MS % 5 E U e u 0110 6 & 6 F V f v 0111 7 ’ 7 G W g w 1000 8 BS ( 8 H[...]

  • Página 154

    16 GENERAL SPECIFICATIONS LD9000 LD900X OPTICAL: Number of rows 2 2 x 2 sides Number of digits/row 20 20 Dot matrix 5 x 7 5 x 7 Digit height) 0.374in. (9.5mm) 0.374in. (9.5mm) Digit width 0.244in. (6.2mm) 0.244in. (6.2mm) Character config. ASCII ASCII Brightness (typical) 900 cd/m 2 900 cd/m 2 Display color Blue-Green Blue-Green MTBF (hours) 300,00[...]

  • Página 155

    SecuGen _______________________________________________________ Products -1 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 General Description FDU02 is a Fingerprint Capture Device that supports the U SB (Universal Serial Bus) interface and can do hot attachment, Plug & Play and alternate funct[...]

  • Página 156

    SecuGen _______________________________________________________ Products -2 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Theory of Operation The USB host initiates the communication with the FDU02 using operation commands. Fingerprint data are then captured by the CMOS sensor at a total image siz[...]

  • Página 157

    SecuGen _______________________________________________________ Products -3 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 ♦ Support s both fingerprint optic recognition and mouse function[...]

  • Página 158

    SecuGen _______________________________________________________ Products -4 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Connector Pin Description Name No States Description GN D 1 Power Sensor Ground CLK 2 Input Sensor Clock SD AT A 0 3 Output Sensor Data0 SD AT A 1 4 Output Sensor Data1 SDATA2 [...]

  • Página 159

    SecuGen _______________________________________________________ Products -5 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Outline Dimension ♦ FDU02AI[...]

  • Página 160

    SecuGen _______________________________________________________ Products -6 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 OPP02M PCB Dimensions[...]

  • Página 161

    SecuGen _______________________________________________________ Products -7 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Mechanical Dimensions(OPP02 M) Optical Specification Hardness of prism surface 750Hk Resolution 500 ± 10 PPI Effective Sensing Area 12 .7mm ( x ) x 14.9mm ( y ) Effective Pixe[...]

  • Página 162

    SecuGen _______________________________________________________ Products -8 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Mounting ♦ Cable connection (Between USB interface and Sensor) FDU02AI USB interface board (FDU0 2AI) is cable- connected to the F ingerpr int Sensor b y a 9 - pin cable conn[...]

  • Página 163

    SecuGen _______________________________________________________ Products -9 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 ♦ Mouse C onnection (Between USB interface and PS/2 mouse)[...]

  • Página 164

    SecuGen _______________________________________________________ Products -1 0 PC Peripheral Type, USB Fingerprint Recognition Devic e FDU02 SGD 0 3 - 03210001 A SecuGen FDU0 2 Application ♦ SecuGen Hamster III (HFDU02A) SecuGen Hamster I I I i s the name of SecuGen’s fingerprint recognition PC peripheral device that uses the FDU02. Using this d[...]

  • Página 165

    Scan Engine Integration Guide Refer to the T ouchT ools CD, browse to T ouch Monitor PeripheralsBarcode Scanner StartupIntegration guides.[...]