HP OMNIBER 718 HP 37718A manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones HP OMNIBER 718 HP 37718A. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica HP OMNIBER 718 HP 37718A o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual HP OMNIBER 718 HP 37718A se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales HP OMNIBER 718 HP 37718A, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones HP OMNIBER 718 HP 37718A debe contener:
- información acerca de las especificaciones técnicas del dispositivo HP OMNIBER 718 HP 37718A
- nombre de fabricante y año de fabricación del dispositivo HP OMNIBER 718 HP 37718A
- condiciones de uso, configuración y mantenimiento del dispositivo HP OMNIBER 718 HP 37718A
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de HP OMNIBER 718 HP 37718A no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de HP OMNIBER 718 HP 37718A y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico HP en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de HP OMNIBER 718 HP 37718A, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo HP OMNIBER 718 HP 37718A, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual HP OMNIBER 718 HP 37718A. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    HP 37718A OmniBER 718 User’ s Guide DSn/SONET Operation[...]

  • Página 2

    Hewlett-Packard Limited Telecommunications Networks Test Division South Queensferry West Lothian, Scotland EH30 9TG  Copyright Hewlett- P ackard Ltd.1998 All rights reserved. Reproduction, adaption, or translation without prior written permission is prohibited, except as allowed under the copyright laws . HP P art No. 37718-90022 First edition ,[...]

  • Página 3

    User’ s Guide DSn/SONET Operation HP 37718A OmniBER 718[...]

  • Página 4

    iv This book tells you ho w to select the features that you want to use for your test. The selections available are presented in the following groups: • Transmit and receive interfaces • T est features , for example, the addition of errors and alarms to the test signal • Measurements including test timing • Storing , logging and printing re[...]

  • Página 5

    Contents v 1 Setting the Interfaces Setting DSn T ransmit Interface 2 Setting SONET T ransmit Interface 4 Setting Jitter T ransmit Interface 7 Setting W ander T ransmit Interface 9 Setting SONET THR U Mode 11 Using Smart T est 13 Setting DSn Recei ve Interf ace 15 Setting SONET Recei ve Interf ace 17 Setting Jitter Recei ve Interf ace 18 Setting Ex[...]

  • Página 6

    vi Contents Inserting an External DSn Payload/T est Signal 43 Dropping an External Payload/T est Signal 46 Adding Errors & Alarms at the SONET Interface 49 Adding Errors & Alarms to the DSn Interface/DSn P ayload 50 Using FEA C Codes 51 Setting DSn Spare Bits 53 Adding Pointer Adjustments 54 Using Pointer Graph T est Function 61 Stressing O[...]

  • Página 7

    Contents vii Measuring Jitter T ransfer 92 4 Storing, Logging and Printing Sa ving Graphics Results to Instrument Store 98 Recalling Stored Graph Results 99 V iewing the Bar Graph Display 101 V iewing the Graphics Error and Alarm Summaries 103 Logging Graph Displays 105 Logging Results 107 Logging on Demand 110 Logging Jitter T olerance Results 112[...]

  • Página 8

    viii Contents Labeling a Disk 132 Managing Files and Directories on Disk 133 Sa ving Graphics Results to Disk 140 Sa ving Data Logging to Disk 142 Sa ving Configurations to Disk 143 Recalling Configuration from Disk 144 Recalling Graphics Results from Disk 145 Copying Configuration from Instrument Store to Disk 146 Copying Configuration from Di[...]

  • Página 9

    Contents ix 7 STS-1 SPE Backgr ound Patter ns 8 ETSI/ANSI T erminology ETSI/ANSI Con version and Equi v alent T erms 170[...]

  • Página 10

    x Contents[...]

  • Página 11

    1 1 Setting the Interfaces This chapter tells you how to set the instrument interfaces to match the network being tested.[...]

  • Página 12

    2 Setting the Interfaces Setting DSn T ransmit Interface Description DSn transmit interface settings should match network equipment settings of Rate, T ermination and Line Code and determine the Pa yload to be tested. TIP: T o set the Transmitter and Receiver to the same interface settings choose . HOW TO: 1 Choose the required SIGNAL rate. Rates o[...]

  • Página 13

    3 Setting the Interf aces Setting DSn T ransmit Interface 3 If DS1 or DS3 is chosen, choose the required OUTPUT LEVEL. 4 If you have chosen 2 Mb/s as the SIGNAL rate , choose the required TERMINATION . (At all other signal rates the impedance is fixed). 5 If you have chosen 2 Mb/s or DS1 as the SIGNAL rate , choose the required LINE CODE. (At 34 M[...]

  • Página 14

    4 Setting the Interf aces Setting SONET T ransmit Interface Setting SONET T ransmit Interface Description SONET transmit interface settings should match the network equipment settings of Rate, W avelength and Mapping , determine the payload to be tested and set background conditions to prevent alarms while testing . TIP: If you wish to set the HP 3[...]

  • Página 15

    5 Setting the Interf aces Setting SONET T ransmit Interface 4 Choose FOREGROUND , BACKGROUND MAPPING and type of payload. Mapping may be selected from a pictorial display by moving the cursor to MAPPING and pressing . Use and to move between STS Layer choice , VT Layer choice and P ayload Layer c hoice. Use and to choose the mapping. Use to confir[...]

  • Página 16

    6 Setting the Interf aces Setting SONET T ransmit Interface If you have chosen 2 Mb/s , DS1 or DS3 under Mapping , the Framed choice is expanded to provide a menu of framing types . 9 Choose the P ATTERN type and PRBS polarity . 10 Choose the mapping required in the background (non-test) STS’ s. 11 If VT mapping is chosen for the test STS , choos[...]

  • Página 17

    7 Setting the Interf aces Setting Jitter T ransmit Interface Setting Jitter T ransmit Interface Description: Y ou can add jitter to the transmitted DSn or SONET signal at 2 Mb/s , 34 Mb/s , STS-3, OC-3, OC-12, and OC-48. Y ou can source the jitter modulation internally or from an external source. HOW TO: 1 If you are adding jitter to the DSn signal[...]

  • Página 18

    8 Setting the Interf aces Setting Jitter T ransmit Interface 5 Choose the modulation source. If adding jitter to the DSn signal and is chosen, connect the external source to the MOD IN port of the DSn Jitter TX module . Up to 10 UI of external jitter modulation can be added at the MOD IN port. If adding jitter to the SDH signal and is chosen, conne[...]

  • Página 19

    9 Setting the Interf aces Setting W ander T ransmit Interface Setting W ander T ransmit Interface Description: Y ou can add W ander to the 2 Mb/s DSn signal and the STS-3, OC-3, OC-12 or OC-48 SONET signal. HOW TO: DSn W ander (2 Mb/s) 1 Connect REF OUT on the SONET Clock module to REF IN on the DSn Jitter TX module (this provides the W ander Refer[...]

  • Página 20

    10 Setting the Interf aces Setting W ander T ransmit Interface 6 Choose the W ANDER MASK setting required. Y ou can choose the w ander modulating frequency and wander amplitude if is chosen. If you choose , you can choose the "spot" w ander frequency . The wander amplitude is adjusted and controlled according to your wander frequency choi[...]

  • Página 21

    11 Setting the Interf aces Setting SONET THRU Mode Setting SONET THRU Mode Description THRU mode is used to non-intrusively monitor SONET lines where no protected monitor points are available . As THRU mode locks some user settings , you must set SIGNAL RATE, STS rate, STS-1 SPE CHANNEL (if appropriate) before selecting THRU mode. The entire frame [...]

  • Página 22

    12 Setting the Interf aces Setting SONET THRU Mode 2 Make the P A YLOAD OVERWRITE choice required. If STS-3c SPE, STS-1 SPE, VT -6, VT -2 or VT -1.5 is chosen, the Section, Line and P ath CVs are recalculated before transmission and the Mapping , Selected VT , VT P ayload, P attern, Tributary Offset and P attern in other VT’ s settings are displa[...]

  • Página 23

    13 Setting the Interf aces Using Smart T est Using Smart T est Description The Smart T est function can help speed-up configuring the instrument in two wa ys. 1 A Smartsetup feature that will attempt to configure the instrument to receive the incoming signal. 2 A series of “links” that provide quick access to some of the most frequently used [...]

  • Página 24

    14 Setting the Interf aces Using Smart T est 4 In SONET mode the incoming signal will be identified on the top line of the display , and under this the payload mappings , the J1 Trace and C2 byte indicators are displayed on the bottom lines . 5 Use the and keys to display the J1 Trace information for each STS SPE. When the STS SPE of interest has [...]

  • Página 25

    15 Setting the Interf aces Setting DSn Receive Interface Setting DSn Receive Interface Description DSn Receive interface settings should match the network equipment settings of Rate, T ermination and Line Code and determine the Pa yload to be tested. TIP: T o set the transmitter and receiver to the same interface settings choose . HOW TO: 1 Choose [...]

  • Página 26

    16 Setting the Interf aces Setting DSn Receive Interface 5 Choose the P A YLOAD TYPE. If is required must be chosen. If is chosen, the DSn test signal must be set up . See “Setting Transmit Structured P ayload/T est Signal” page 37. If you chose 2 Mb/s , DS1 or DS3 as the PDH/DSn SIGNAL rate, the FRAMED choice is expanded to provide a menu of f[...]

  • Página 27

    17 Setting the Interf aces Setting SONET Receive Interface Setting SONET Receive Interface Description SONET Receive interface settings should match the network equipment settings of Rate and Mapping , and determine the payload to be tested. TIP: If you wish to set the HP 37718A transmitter and receiver to the same interface settings , choose . HOW[...]

  • Página 28

    18 Setting the Interf aces Setting Jitter Receive Interface Setting Jitter Receive Interface Description: Jitter and error measurements are made simultaneously when a jitter option is fitted. The measurements are made on the normal input to the DSn or SONET receiver and the interface selections are the normal Receiver selections . The jitter recei[...]

  • Página 29

    19 Setting the Interf aces Setting Extended Jitter Receive Interface Setting Extended Jitter Receive Interface Description: Extended Jitter measurements are made in a jitter bandwidth of 0.1 Hz to 25 kHz. These measurements are made at the upper end of the standard wander frequency range and the lower end of the standard jitter frequency range. The[...]

  • Página 30

    20 Setting the Interf aces Setting W ander Receive Interface Setting W ander Receive Interface Description: Y ou can measure W ander at all DSn and SONET rates. An external timing reference should be selected on the or display to ensure accurate W ander results. HOW TO: 1 Choose an external timing reference on the display . See , “Setting SONET T[...]

  • Página 31

    2 2 Selecting T est F eatures[...]

  • Página 32

    22 Selecting T est F eatures Using T ransmit Overhead Setup Description Y ou can set an overhead byte to a known static state to aid troubleshooting , for example to quickly check for "stuck bits" in path overhead bytes . Transport Overhead, P ath Overhead, Trace Messages and Labels can be set using this feature. HOW TO: 1 Set up the SONE[...]

  • Página 33

    23 Selecting T est Features Using T ransmit Overhead Setup If (Transport Overhead) is chosen, c hoose the STS-1 to be displayed. Many bytes in and are unlabeled as the other overhead functions have not yet been defined. If is chosen, the hexadecimal value of all 81 bytes of the STS-3 section & line overhead selected are displayed (all 324 byte[...]

  • Página 34

    24 Selecting T est Features Using Receive Overhead Monitor Using Receive Overhead Monitor Description When first connecting to a SONET network, a start up confidence check can be made by viewing the behavior of all the overhead bytes . If the SONET network shows alarm indications , some diagnosis of the problem may be gained from viewing all the [...]

  • Página 35

    25 Selecting T est Features Using Receive Overhead Monitor If BYTE NAMES is chosen, the labels for the overhead bytes are displayed. 4 If POH (P ath Overhead) is chosen, choose the source of the overhead, SPE or VTSPE. J1 and J2 bytes can be monitored under P ath Overhead or Trace Messages 5 If TRACE MESSAGES is chosen, you can monitor a data messa[...]

  • Página 36

    26 Selecting T est Features Setting Overhead T race Messages Setting Overhead T race Messages Description Y ou can insert a data message to verify portions of the network: J0 verifies the section overhead. J1 verifies the STS-1 SPE or STS-3c SPE path connection. J2 verifies the VT SPE path connection. HOW TO: 1 Choose the message for insertion i[...]

  • Página 37

    27 Selecting T est Features Generating Overhead Sequences Generating Overhead Sequences Description Y ou may insert a pattern into a functional group of overhead bytes for testing or troubleshooting purposes . HOW TO: 1 Set up the SONET transmit interface and payload required. See “Setting SONET Transmit Interface” page 4. 2 Choose the type of [...]

  • Página 38

    28 Selecting T est Features Generating Overhead Sequences 6 Start the sequence by choosing . NO TE When you start the sequence illustrated, one Out of Frame alarm and one Loss of Frame alarm should occur every eight seconds . ST ART[...]

  • Página 39

    29 Selecting T est Features Using Receive Overhead Capture Using Receive Overhead Capture Description Section, Line and P ath overhead provide network support functions , responding dynamically to network conditions and needs . It is therefore useful to capture overhead activity on a frame by frame basis . TIP: The Overhead Capture display can be l[...]

  • Página 40

    30 Selecting T est Features Using Receive Overhead Capture - captures activity after the first occurrence of a deviation from your specified overhead state. Can be used for transient detection from a specified expected state. 4 Up to 16 records of overhead state are provided. Each record will represent between 1 and 64,000 frames . A capture is [...]

  • Página 41

    31 Selecting T est Features Adding Frequency Offset to SONET Signal Adding F requency Offset to SONET Signal Description Frequency offset can be added to the SONET interface rate signal and to the payload signal. HOW TO: SONET Line Rate Offset 1 Choose the amount of frequency offset required. Y ou can set the Frequency Offset in the range -999 ppm [...]

  • Página 42

    32 Selecting T est Features Adding Frequency Offset to SONET Signal Tributary Offset ± 100 ppm 1 Choose the amount of tributary offset required. Y ou can set the Offset in the range -100 ppm to +100 ppm in 1 ppm steps using and . The amount of applied Frequency Offset can be varied while measurements are taking place. Tributary offset affects the [...]

  • Página 43

    33 Selecting T est Features Adding Frequency Offset to the DSn Signal Adding F requency Offset to the DSn Signal Description Y ou can add frequency offset to the interface DSn SIGNAL at all rates . Frequency Offset can be added at preset ITU values or as User defined values in the range ± 100 ppm. The preset values change with the SIGNAL rate cho[...]

  • Página 44

    34 Selecting T est Features Setting up Signaling Bits Setting up Signaling Bits Description When transmitting 2.048 Mb/s signals with timeslot-16 CAS (PCM30 or PCM30CRC) multiframing the state of A,B ,C ,D signaling bits can be set. The signaling bits of all timeslots are set to the user -defined 4 bit value. When transmitting a DS1 framed, struct[...]

  • Página 45

    35 Selecting T est Features Setting up Signaling Bits SONET Operation 1 Choose on the display 2 Choose MAPPING or and VT P A YLOAD or on the display . 3 If UNSTRUCTURED is chosen set the 2M C AS ABCD bits value on the display . If STRUCTURED is chosen set the 2M C AS ABCD bits value on the display . HOW TO Transmit a DS1 payload signal with user-de[...]

  • Página 46

    36 Selecting T est Features Setting up Signaling Bits 2 Choose SIGNAL or , and P A YLOAD TYPE on the display 3 Choose TEST SIGNAL or on the display . 4 Set the A,B bits (for D4 and SLC-96) and A,B ,C ,D bits (for ESF) as required. SONET Operation 1 Choose on the display . 2 Choose MAPPING or and VT P A YLOAD on the display 3 Choose TEST SIGNAL or o[...]

  • Página 47

    37 Selecting T est Features Setting T ransmit Structured Pa yload/T est Signal Setting T ransmit Structured P ayload/T est Signal Description Structured DSn P ayload/T est Signal settings determine the SONET payload or the DSn test signal to be tested and set any background (non test) conditions to prevent alarms while testing . TIP : If you wish t[...]

  • Página 48

    38 Selecting T est Features Setting T ransmit Structured Pa yload/T est Signal 5 Choose the B/G P ATTERN . The B/G P ATTERN in the non test 56/64 kb/s timeslots is fixed as NUMBERED , that is, each timeslot contains a unique number to allow identification in case of routing problems . Signaling 6 If a 2 Mb/s P A YLOAD with PCM30 or PCM30CRC frami[...]

  • Página 49

    39 Selecting T est Features Setting Receive Structured P ayload/T est Signal Setting Receive Structured P ayload/T est Signal Description Structured DSn P ayload/T est Signal settings determine the SONET payload or the DSn test signal to be tested. TIP: If you wish to set the HP 37718A transmitter and receiver to the same P ayload settings , choose[...]

  • Página 50

    40 Selecting T est Features Setting T ransmi tNx6 4 kb/s/N x 56 kb/s Structured P ayload/T est Signal Setting T ransmit N x 64 kb/s/N x 56 kb/s Structured P ayload/T est Signal Description Wideband services suc h as high speed data links and LAN interconnection require a bandwidth greater than 56/64 kb/s but less than DS1/2 Mb/s for example 112 kb/[...]

  • Página 51

    41 Selecting T est Features Setting T ransmi tNx6 4 kb/s/N x 56 kb/s Structured P ayload/T est Signal 6 The B/G P ATTERN in the non-test 56/64 kb/s timeslots is fixed as NUMBERED , that is , each timeslot contains a unique identification number . Signaling 7 If a 2 Mb/s P A YLOAD with PCM30 or PCM30CRC framing, or 56 kb/s or Nx56kb/s T est Signal[...]

  • Página 52

    42 Selecting T est Features Setting Receive N x 64 kb/s/N x 56 kb/s Structured P ayload/T est Signal Setting Receive N x 64 kb/s/N x 56 kb/s Structured P ayload/T est Signal Description Wideband services suc h as high speed data links and LAN interconnection require a bandwidth greater than 56/64 kb/s but less than DS1/2 Mb/s e.g . 112 kb/s or 336 [...]

  • Página 53

    43 Selecting T est Features Inserting an External DSn Pa yload/T est Signal Inserting an External DSn P ayload/T est Signal Description Y ou can insert a DSn signal from external equipment into the SONET signal, or you can insert 2 Mb/s or DS1 into the structured DSn signal, as shown in the table below . DS3 and 34 Mb/s can only be inserted if SONE[...]

  • Página 54

    44 Selecting T est Features Inserting an External DSn Pa yload/T est Signal Insert 2 Mb/s or DS1 (Unstructured SONET P ayload) 1 Connect the external payload to the MUX port of the PDH/DSn Transmit module. If 2 Mb/s connect to 75 Ω MUX port. If DS1 connect to 100Ω MUX port. 2 Set up the required transmit SONET interface, and c hoose VT -2 or VT[...]

  • Página 55

    45 Selecting T est Features Inserting an External DSn Pa yload/T est Signal Structured SONET P ayload 2 Set up the required transmit SONET interface. See "Setting SONET Transmit Interface " page 4. 3 Set up the SONET structured payload. See "Setting Transmit Structured P ayload/T est Signal " page 37. 4 Choose 2M P A YLOAD/DS1 P[...]

  • Página 56

    46 Selecting T est Features Dropping an External P ayload/T est Signal Dropping an External P ayload/T est Signal Description Y ou can drop a DSn signal from the received payload or drop 2 Mb/s or DS1 from the structured DSn signal to external equipment as shown in the table below . DS3 and 34 Mb/s can only be dropped if SONET is chosen as the rece[...]

  • Página 57

    47 Selecting T est Features Dropping an External P ayload/T est Signal Drop 2 Mb/s /DS1 (Unstructured SONET P ayload) 1 Connect the DEMUX port of the DSn module to the external equipment. 2 Set up the required receive SONET interface, and c hoose VT -2 or VT -1.5 MAPPING and VT P A YLOAD or . 3 Choose the required LINE CODE. Drop 2 Mb/s/DS1 (Struct[...]

  • Página 58

    48 Selecting T est Features Dropping an External P ayload/T est Signal Structured SONET P ayload 2 Set up the required receive SONET interface. See "Setting SONET Receive Interface " page 17. 3 Set up the SONET structured payload. See "Setting Receive Structured P ayload/T est Signal " page 39. 4 Choose 2M P A YLOAD or DS1 P A Y[...]

  • Página 59

    49 Selecting T est Features Adding Err ors & Alarms at the SONET Interface Adding Errors & Alarms at the SONET Interface Description Errors and alarms can be added to the SONET interface signal during testing . HOW TO: 1 Set up the SONET transmit interface and payload required. See "Setting SONET Transmit Interface " page 4. 2 Cho[...]

  • Página 60

    50 Selecting T est Features Adding Err ors & Alarms to the DSn Interface/DSn P a yload Adding Errors & Alarms to the DSn Interface/ DSn P ayload Description Errors and alarms can be added to the DSn interface/payload signal during testing . HOW TO: 1 If SONET interface is chosen, set up the SONET transmit interface and payload required. See[...]

  • Página 61

    51 Selecting T est Features Using FEA C Codes Using FEAC Codes Description The third C-Bit in subframe 1 is used as a FEAC channel, where alarm or status information from the far -end terminal can be sent back to the near -end terminal. The channel is also used to initiate DS3 and DS1 line loopbacks at the far -end terminal from the near -end termi[...]

  • Página 62

    52 Selecting T est Features Using FEA C Codes 3 Choose the FEAC CODE TYPE. 4 Choose the MESSAGE from the choices displayed. If you chose a DS1 message an additional field to the right of the DS1 MESSAGE is displayed. P osition the cursor on this field and choose or . If you choose use the EDIT keys to select a channel from 1 to 28. Press when fi[...]

  • Página 63

    53 Selecting T est Features Setting DSn Spare Bits Setting DSn Spare Bits Description Certain Spare Bits will cause the occurrence of a minor alarm when received as a logical "0".: 8 Mb/s & 34 Mb/s - F AS Bit 12 2 Mb/s - NF AS Timeslot (timeslot 0 of NF AS frame) Bit 0 HOW TO: 1 If SONET interface is chosen, set up the SONET transmit [...]

  • Página 64

    54 Selecting T est Features Adding P ointer Adjustments Adding P ointer Adjustments Description The transmitted SPE or VT pointer value can be adjusted for testing purposes . HOW TO: 1 Set up the SONET transmit interface and payload required. See "Setting SONET Transmit Interface " page 4. 2 Choose the POINTER TYPE. 3 Choose the ADJUSTMEN[...]

  • Página 65

    55 Selecting T est Features Adding P ointer Adjustments OFFSET - Y ou can frequency offset the line rate or the SPE/VT rate , relative to each other , thus producing pointer movements. If you offset the SPE pointer , an 87:3 sequence of pointer movements is generated. The available configurations are listed in the following table . If you are curr[...]

  • Página 66

    56 Selecting T est Features Adding P ointer Adjustments Note: SINGLE (A1), BURST (A2) and PHASE TRANSIENT(A3) are Non P eriodic Sequences . Initialization P eriod F or SINGLE A1, BURST A2 and PHASE TRANSIENT A3 sequences the initialization sequence consists of 60 seconds of pointer adjustments applied at a rate of 2 adjustments per second and in th[...]

  • Página 67

    57 Selecting T est Features Adding P ointer Adjustments NO TE The following conditions apply for pointer sequence generation: The sequences can only be applied to the SPE pointer when the SPE does not contain a VT structure, otherwise it is applied to the VT pointer . P ointer sequence generation is not available when a frequency offset is being ap[...]

  • Página 68

    58 Selecting T est Features Adding P ointer Adjustments T1.105 A3 PHASE TRANSIENT GR-253 5031 Phase transient pointer adjustment burst test sequence. All adjustments are of the same polarity , which is selectable. The interval between bursts is fixed at 30 seconds . Each burst consists of 7 pointer movement. The first 3 in each burst are 0.25 s a[...]

  • Página 69

    59 Selecting T est Features Adding P ointer Adjustments NO TE F or SPE pointers the sequence interval is selectable from 7.5 ms, 10, 20, 30, 34 ms; 40 to 100 ms in 10 ms steps , 100 to 1000 ms in 100 ms steps 1, 2, 5, 10 seconds . F or VT pointers the sequence interval is selectable from: 200 ms, 500 ms , 1, 2, 5 and 10 seconds . F or SPE pointers [...]

  • Página 70

    60 Selecting T est Features Adding P ointer Adjustments T able 1 P ointer Sequences A v ailable with Selected Mapping POINTER SEQUENCE MAPPING SPE VT6, VT2 VT1.5 A1 SINGLE ✓✓✓ A2 BURST OF 3 ✓✓✓ A3 PHASE TRANSIENT ✓✓✓ A4 PERIODIC NORMAL(87-3) ✓ A4 PERIODIC NORMAL (Continuous) ✓✓✓ PERIODIC NORMAL (26-1) ✓ A5 PERIODIC ADD ([...]

  • Página 71

    61 Selecting T est Features Using P ointer Graph T est Function Using P ointer Graph T est Function P ointer Graph shows the relative offset during the measurement period. This allows the time relationship of SPE or VT pointer movements to be observed. Up to 4 days of storage allows long term effects such as W ander to be observed. If an alarm occu[...]

  • Página 72

    62 Selecting T est Features Using P ointer Graph T est Function If , during a long term measurement (4 days), an event occurs at a particular time each day , a short term measurement can be made at the identified time to gain more detail of the event. 3 Choose the POINTER UNDER TEST type. 4 Press to start the measurement. TIP: If the event occurs [...]

  • Página 73

    63 Selecting T est Features Stressing Optical Clock Reco very Circuits Stressing Optical Clock Recovery Circuits Description Ideally clock recovery circuits in the network equipment optical interfaces should recover the clock even in the presence of long strings of 0’ s. Y ou can check the performance of your optical clock recovery circuits using[...]

  • Página 74

    64 Selecting T est Features Generating A utomatic Protection Switc h Messages Generating Automatic Protection Switch Messages Description Y ou can program the K1 and K2 bytes to exercise the APS functions for Both LINEAR (ITU-T G .783) and RING (ITU-T G .841) topologies . HOW TO: 1 Set up the SONET transmit interface and payload required. See "[...]

  • Página 75

    65 Selecting T est Features Inserting & Dropping Data Communications Channel Inserting & Dropping Data Communications Channel Description The Data Communications Channel (DCC) of the regenerator and multiplexer section overhead can be verified by protocol testing . The Insert and Drop capability provides access to the DCC via the RS-449 co[...]

  • Página 76

    66 Selecting T est Features Inserting & Dropping Data Communications Channel[...]

  • Página 77

    3 3 Making Measur ements[...]

  • Página 78

    68 Making Measurements Using Overhead BER T est Function Using Overhead BER T est Function Description Y ou can perform a Bit Error Rate test on chosen bytes of the section, line and path overhead bytes . Y ou can access the transmit Overhead BER on the display . HOW TO: 1 Set up the SONET transmit interface and payload required. See "Setting [...]

  • Página 79

    69 Making Measurements T est Timing T est T iming Description There are two aspects to test timing: • Error results may be displayed as short term or cumulative over the measurement period.If short term error measurements are required, the short term period may be selected. • The period of the test may be defined or controlled manually . HOW T[...]

  • Página 80

    70 Making Measurements Making SONET Analysis Measurements Making SONET Analysis Measurements Description G .826, M.2101, M.2110 and M.2120 analysis results are provided for all relevant SONET error sources . In addition the following results are provided: Cumulative error count and error ratio Short T erm error count and error ratio Alarm Seconds F[...]

  • Página 81

    71 Making Measurements Making DSn Analysis Measurements Making DSn Analysis Measurements Description G .821, G .826, M.2100, M.2110 and M.2120 analysis results are provided for all relevant DSn and DSn P ayload error sources . In addition the following results are provided: Cumulative error count and error ratio Short T erm error count and error ra[...]

  • Página 82

    72 Making Measurements Measuring Frequency Measuring F requency Description The signal frequency and the amount of offset from the standard rate can be measured to give an indication of probability of errors . HOW TO: 1 Connect the signal to be measured to the IN port of the DSN Receive module or the IN port of the Multirate Analyzer module (SONET [...]

  • Página 83

    73 Making Measurements Measuring Optical P ower Measuring Optical P ower Description Optical power measurement can be performed on the SONET signal connected to the Optical module IN port. HOW TO: 1 Connect the SONET optical signal to the IN port of the Optical Interface module. 2 Choose the received input signal rate on the display . NO TE Optical[...]

  • Página 84

    74 Making Measurements Measuring Round T rip Delay Measuring Round T rip Delay Description: The time taken for voice traffic to pass through the network is very important. Excessive delay can make speech difficult to understand. The Round Trip Delay feature of the HP 37718A measures the dela y in a 64 kb/s timeslot. A test pattern is transmitted [...]

  • Página 85

    75 Making Measurements Measuring Round T rip Delay 4 Choose ACTION to start the measurement. If measuring on an SONET interface, the results are a vailable on the display . If measuring on a DSn interface, the results are a vailable on the display . The Round Trip delay measurement range is up to 2 seconds . The resolution varies with the received [...]

  • Página 86

    76 Making Measurements Monitoring Signaling Bits Monitoring Signaling Bits Description The HP 37718A receiver can be used to monitor the state of signaling bits in received 2 Mb/s signals with timeslot-16 CAS multiframing (PCM30 or PCM30CRC) and DS1 structured signals . 2.048 Mb/s Results F or 2 Mb/s signals with timeslot-16 CAS multiframing a tabl[...]

  • Página 87

    77 Making Measurements Measuring Service Disruption Time Measuring Service Disruption T ime Description: Protection switching ensures that data integrity is maintained and revenue protected when equipment failure occurs . The speed of operation of the protection switch can be measured. The sequence of events involved in measuring the switching time[...]

  • Página 88

    78 Making Measurements Measuring Service Disruption Time NO TE At DS1 and DS3 Service Disruption results are only available for Unstructured payloads . Error Burst Definition Error bursts start and finish with an error . Bursts of less than 10 us are ignored. Bursts are assumed to have completed when >2000ms elapses without any errors being re[...]

  • Página 89

    79 Making Measurements Measuring Service Disruption Time 4 Press to start the measurement. 5 Invoke the protection switch. 6 View the results on the display . Results Displayed LONGEST - Longest burst of errors during measurement. SHORTEST - Shortest burst of errors during measurement. LAST - Length of last burst of errors detected during measureme[...]

  • Página 90

    80 Making Measurements P erforming a SONET T rib utary Scan P erforming a SONET Tributary Scan Description Tributary Scan tests each tributary for error free operation and no occurrence of P attern Loss . A failure is indicated by highlighting the tributary in which the failure occurred. The , mapping setup determines the tributary structure. The H[...]

  • Página 91

    81 Making Measurements P erforming a SONET T rib utary Scan 4 The Tributary Scan results can be viewed on the display . The Scan can be started on the display or the display by choosing ST ART . If the Scan is started on the display , the HP 37718A changes to the display . If a single path, for example, MAPPING is chosen, then Tributary Scan is dis[...]

  • Página 92

    82 Making Measurements P erforming an SONET Alarm Scan P erforming an SONET Alarm Scan Description SONET Alarm Scan tests each channel for alarm free operation and identifies and indicates any Unequipped channels . Y ou can configure the Scan to chec k for the occurrence of any P ath layer CV errors above a chosen threshold. The channel in which [...]

  • Página 93

    83 Making Measurements P erforming a DSn Alarm Scan P erforming a DSn Alarm Scan Description DSn Alarm Scan tests each channel for the following alarms: Frame Loss RAI AIS The channel in which an alarm occurs is highlighted. HOW TO: 1 Set up the receive DSn interface as required. See “Setting DSn Receive Interface” page 15. 2 Choose to start th[...]

  • Página 94

    84 Making Measurements Measuring Jitter Measuring Jitter Description: Jitter and error measurements are made simultaneously when a jitter option is fitted. The measurements are made on the normal input to the DSn or SONET receiver and the interface selections are the normal DSn or SONET Receiver selections . Cumulative and Short T erm results of J[...]

  • Página 95

    85 Making Measurements Measuring Jitter 3 If performing a Jitter T olerance measurement, See “Measuring Jitter T olerance” page 89. If performing a Jitter Transfer measurement, See “Measuring Jitter Transfer” page 92. 4 Press to start the measurement. 5 Y ou can view the Jitter hits and Amplitude results on the display . RUN/ST OP RESUL TS [...]

  • Página 96

    86 Making Measurements Measuring Extended Jitter Measuring Extended Jitter Description: Extended jitter measurements are made in a jitter bandwidth of 0.1 Hz to 25 kHz. These measurements are made at the upper end of the standard wander frequency range and the lower end of the standard jitter frequency range. When is chosen Jitter results are provi[...]

  • Página 97

    87 Making Measurements Measuring W ander Measuring W ander Description: Accurate W ander measurements require a W ander reference derived from the SONET Clock module . W ander results are displayed in UI and nanoseconds and Jitter Amplitude and Jitter Hits results are available . When wander is measured at 2 Mb/s , Estimated Bit and Frame slips are[...]

  • Página 98

    88 Making Measurements Measuring W ander 4 If measuring wander at a SONET rate set up the SONET receive interface. See , “Setting SONET Receive Interface” page 17. 5 Choose MEASUREMENT TYPE . 6 Choose the W ANDER HIT THRESHOLD level - if the received wander exceeds the value chosen a w ander hit is recorded. 7 Press to start the measurement. HO[...]

  • Página 99

    89 Making Measurements Measuring Jitter T olerance Measuring Jitter Tolerance Description: The jitter auto tolerance feature provides jitter tolerance measurements within the relevant ITU-T mask, G .823 for DSn, G .958, G .825 and Bellcore GR-253 for SONET . Jitter is generated at a range of frequencies within the mask and an error measurement is m[...]

  • Página 100

    90 Making Measurements Measuring Jitter T olerance 2 If you are performing jitter tolerance on the SONET signal, set up the SONET transmit and receive interfaces . See “Setting SONET Transmit Interface” page 4 and “Setting SONET Receive Interface” page 17. 3 If SONET is chosen as the interface , choose the SONET MASK. TYPE A masks as per IT[...]

  • Página 101

    91 Making Measurements Measuring Jitter T olerance HOW TO: View the Results 1 Choose the results FORMAT . If is chosen, a plot of the jitter tolerance results against the ITU-T mask is displayed. If is chosen, the results from which the graph is constructed are displayed, P oint number , Frequency , Mask amplitude, T olerance, Result. If applicable[...]

  • Página 102

    92 Making Measurements Measuring Jitter T ransfer Measuring Jitter T ransfer Description: Y ou can perform Jitter transfer measurements at each of the four DSn rates , STS-3, OC-3, OC-12 and OC-48. The jitter generator provides the stimulus for the jitter transfer measurement. Narrow band filtering is used in the jitter receiver thus allowing sele[...]

  • Página 103

    93 Making Measurements Measuring Jitter T ransfer HOW TO: P erform Jitter Transfer Calibration NO TE The C ALIBRATION should alw ays be carried out with LEVEL selected on the display . 1 If DSn Jitter Transfer is required, set up the DSn transmit and receive interfaces , the receive jitter interface and connect DSn IN to DSn OUT . See “Setting DS[...]

  • Página 104

    94 Making Measurements Measuring Jitter T ransfer 4 Choose JITTER on the display . 5 Choose the NUMBER OF POINTS at which jitter is transmitted (3 to 55) 6 Choose the DWELL TIME - the time jitter is generated at each jitter frequency point (5 to 30 seconds). 7 Choose the DELA Y TIME - the time delay between the jitter frequency/amplitude being appl[...]

  • Página 105

    95 Making Measurements Measuring Jitter T ransfer HOW TO: Start the Jitter Transfer Measurement NO TE The Jitter Transfer measurement must be started within 10 minutes of the completion of calibration. 1 After the CALIBRA TION is completed, remove the back to back connection from the DSn or SONET or optical interfaces . If the measurement is to be [...]

  • Página 106

    96 Making Measurements Measuring Jitter T ransfer HOW TO: View the Results 1 Choose the results FORMAT . If is chosen, a plot of the jitter transfer results against the ITU-T mask is displayed. If is chosen, the results from which the graph is constructed are displayed: P oint number , Frequency , Mask amplitude (dB), Jitter Gain (dB), Result. If a[...]

  • Página 107

    4 4 Storing, Logging and Printing[...]

  • Página 108

    98 Storing, Logging and Pr inting Saving Graphics Results to Instrument Store Saving Graphics Results to Instrument Store Description Graphical representation of measurement results is very useful particularly during a long measurement period. It provides an overview of the results and can be printed for record keeping . Graphics results can be sto[...]

  • Página 109

    99 Storing, Logging and Pr inting Recalling Stored Graph Results Recalling Stored Graph Results Description Results stored from a previous measurement can be recalled to the graphics displays for viewing and printing. HOW TO: 1 If currently viewing the bar graph display , select then . If currently viewing the error or alarm summary , select . 2 Us[...]

  • Página 110

    100 Storing, Logging and Pr inting Recalling Stored Graph Results The top row of the display comprises five fields: Store Memory location in which the displayed bar graph data is stored. Move the highlighted cursor , to the STORE location desired, using and . Start Date The start date of the test, which produced the stored results . Start Time Th[...]

  • Página 111

    101 Storing, Logging and Pr inting Viewing the Bar Graph Displa y V iewing the Bar Graph Display Description All the graphic results obtained during the measurement are available for viewing . Identify a period of interest and zoom in for more detailed examination. HOW TO: 1 T o view the current bar graphs, press and use and to obtain the bar graph[...]

  • Página 112

    102 Storing, Logging and Pr inting Viewing the Bar Graph Displa y Zoom The width, in minutes , of each "bar" in the bar graph, controlled by / . Cursor The cursor position in terms of time and date, controlled by and . The cursor position changes in steps of 1 second, 1 minute, 15 minutes or 60 minutes dependent upon the ZOOM setting . Th[...]

  • Página 113

    103 Storing, Logging and Pr inting Viewing the Graphics Err or and Alarm Summaries V iewing the Graphics Error and Alarm Summaries Description The error and alarm summaries of the measurement chosen are displayed on the display . The error summary or alarm summary can be viewed at any time. HOW TO: 1 T o view the error or alarm summary associated w[...]

  • Página 114

    104 Storing, Logging and Pr inting Viewing the Graphics Err or and Alarm Summaries Start The start time and date of the test, that produced the displayed results . Stop The stop time and date of the test, that produced the displayed results .[...]

  • Página 115

    105 Storing, Logging and Pr inting Logging Graph Displa ys Logging Graph Displays Description The bar graphs and error and alarm summaries can be logged to the disk for printing at a later date. If Option 601, Remote Control, is fitted, the bar graphs and error and alarm summary can be logged to an external HP DeskJ et printer at the end of the te[...]

  • Página 116

    106 Storing, Logging and Pr inting Logging Graph Displa ys 4 Choose to confirm or abort the print. T o confirm the print and only print the portion of the graph displayed and the summaries choose . T o confirm the print and print the graph for the whole measurement period and the summaries choose . T o abort the print choose . 5 T o log the sele[...]

  • Página 117

    107 Storing, Logging and Pr inting Logging Results Logging Results Description T est P eriod Logging If degradations in system performance can be observed at an early stage, then the appropriate remedial action can be taken to maximize circuit availability and avoid system crashes . T est period logging allows you to monitor the error performance o[...]

  • Página 118

    108 Storing, Logging and Pr inting Logging Results • Optional Internal printer fitted into the instrument front cover (Option 602) • External HP-IB printer (option 601) • External RS-232-C printer (option 601) • External P arallel P ort printer (option 601) • Disk Drive HOW TO: 1 Choose LOGGING [ON] - enables the logging of results and a[...]

  • Página 119

    109 Storing, Logging and Pr inting Logging Results printer paper). 7 Choose the logging DEVICE. If RS232 is chosen, see "Logging Results to RS-232-C Printer " page 119. If HPIB is chosen, see "Logging Results to HP-IB Printer " page 117. If P ARALLEL is chosen, see "Logging Results to Parallel (Centronics) Printer " pa[...]

  • Página 120

    110 Storing, Logging and Pr inting Logging on Demand Logging on Demand Description When is pressed the chosen results are logged to the chosen logging device. The c hoice of results for logging is: RESUL TS SN APSHO T - last recorded measurement results O VERHEAD SNAPSHO T - last recorded overhead v alues of the chosen STS-3 O VERHEAD CAPTURE - Ove[...]

  • Página 121

    111 Storing, Logging and Pr inting Logging on Demand If P ARALLEL is chosen, see "Logging Results to Parallel (Centronics) Printer " page 116. If DISK is chosen, see “Saving Data Logging to Disk” page 142. If Option 602, Internal Printer , is fitted and INTERNAL is chosen, see "Logging Results to Internal Printer " page 118[...]

  • Página 122

    112 Storing, Logging and Pr inting Logging Jitter T olerance Results Logging Jitter T olerance Results Description The jitter auto tolerance feature provides jitter tolerance measurements within the relevant ITU-T mask, G .823 for DSn, G .958, G .825 and G .253 for SONET . Y ou can log the jitter auto tolerance results to a printer for record keepi[...]

  • Página 123

    113 Storing, Logging and Pr inting Logging Jitter T olerance Results 7 Choose 80 character column width ( ) or 40 character column width ( ) according to the capabilities of your printer . 8 Choose the same baud SPEED as chosen on your printer . 9 Choose the PROTOCOL required for the transfer of logging data. 10 Choose LOGGING on the LOGGING SETUP [...]

  • Página 124

    114 Storing, Logging and Pr inting Logging Jitter T ransfer Results Logging Jitter T ransfer Results Description The jitter transfer feature provides jitter transfer measurements within the relevant ITU-T mask, G .823 for DSn and G .958 for SONET . Y ou can log the jitter transfer results to a printer for record keeping purposes . The version or th[...]

  • Página 125

    115 Storing, Logging and Pr inting Logging Jitter T ransfer Results width ( ) according to the capabilities of your printer . 8 Choose the same baud SPEED as chosen on your printer . 9 Choose the PROTOCOL required for the transfer of logging data. 10 Choose LOGGING on the LOGGING SETUP display . 11 Choose and SCALE or on the display if you wish to [...]

  • Página 126

    116 Storing, Logging and Pr inting Logging Results to P arallel (Centr onics) Printer Logging Results to P arallel (Centronics) Printer Description If Option 601, Remote Control Interface, is fitted, you can log the results and alarms to an external P arallel printer connected to the P ARALLEL port. The P arallel port provides a standard IEEE 1284[...]

  • Página 127

    117 Storing, Logging and Pr inting Logging Results to HP-IB Printer Logging Results to HP-IB Printer Description If Option 601, Remote Control Interface, is fitted, you can log the results and alarms to an external HP-IB printer connected to the HP-IB port. HOW TO: 1 Connect an HP-IB printer to the HPIB port. NO TE Choosing HP-IB external printer [...]

  • Página 128

    118 Storing, Logging and Pr inting Logging Results to Internal Printer Logging Results to Internal Printer Description If Option 602, Internal Printer is fitted, you can log the results and alarms to the in-lid printer . HOW TO: 1 Choose the LOGGING SETUP and set up the display as required. See "Logging Results " page 107. CONTROL[...]

  • Página 129

    119 Storing, Logging and Pr inting Logging Results to RS-232-C Printer Logging Results to RS-232-C Printer Description If Option 601, Remote Control Interface, is fitted, you can log the results and alarms to an external RS-232-C printer connected to the RS232 port. HOW TO: 1 Connect an RS-232-C printer to the RS232 port. NO TE Choosing RS232 exte[...]

  • Página 130

    120 Storing, Logging and Pr inting Printing Results from Disk Printing Results from Disk Description The results and alarms you logged to Disk can be printed by removing the Disk from the HP 37718A and inserting it into a personal computer (PC). HOW TO: Print from DOS Prompt copy/b a:<filename> <printer name> HOW TO: Print from Window[...]

  • Página 131

    121 Storing, Logging and Pr inting Connecting an HP 850C DeskJet Printer to a P arallel P ort Connecting an HP 850C DeskJ et Printer to a P arallel P ort Description If Remote Control Option, 601, is fitted, the HP 37718A has the capability of interfacing with an HP 850C DeskJ et printer or , an alternative suppliers printer , via the P ARALLEL po[...]

  • Página 132

    122 Storing, Logging and Pr inting Changing Internal Printer P aper Changing Internal Printer P aper Description The printer accepts rolls of thermal paper with the following dimensions: Suitable rolls of paper are available from Hewlett P ackard, P art Number 9270-1360. W ARNING The paper tear-off edge is SHARP . This edge is exposed when the prin[...]

  • Página 133

    123 Storing, Logging and Pr inting Changing Internal Printer P aper 4 Put the paper roll on the spindle such that the sensitive side will be on the underside of the print mechanism. Ensure that the relocation of the spindle locks the blue width adaptor in position. NO TE The paper must be installed such that when it is in the print mechanism, the s[...]

  • Página 134

    124 Storing, Logging and Pr inting Changing Internal Printer P aper 6 If the printer paper is incorrectly aligned, raise the printer mechanism front cover to releases the paper drive and realign the paper . LIFT T O ADJUST P APER ALIGNMENT[...]

  • Página 135

    125 Storing, Logging and Pr inting Cleaning Internal Printer Print Head Cleaning Internal Printer Print Head Description The print head should be cleaned when broken or light characters occur in a vertical line on the page. T o maintain a high quality print, clean the print head after 200 to 300 prints . The print head is cleaned with a special cle[...]

  • Página 136

    126 Storing, Logging and Pr inting Cleaning Internal Printer Print Head[...]

  • Página 137

    5 5 Using Instrument and Disk Storage[...]

  • Página 138

    128 Using Instrument and Disk Storage Storing Configurations in Instrument Store Storing Configurations in Instrument Store Description Y ou can store measurement settings which are used regularly and recall them with a single operation. One preset store is provided which cannot be overwritten, STORED SETTING NUMBER [0]. This store is used to set[...]

  • Página 139

    129 Using Instrument and Disk Storage Titling Configuration in Instrument Store T itling Configuration in Instrument Store Description When storing configurations , you can give them an easily remembered title for identification at a later date. HOW TO: 1 Choose the STORED SETTING NUMBER which contains the stored configuration. 2 Choose LOCK .[...]

  • Página 140

    130 Using Instrument and Disk Storage Recalling Configurations from Instrument Store Recalling Configurations from Instrument Store Description Having stored a configuration for future use , you must be able to recall that configuration in the future. HOW TO: 1 Choose the STORED SETTING NUMBER which contains the stored configuration. 2 Choose [...]

  • Página 141

    131 Using Instrument and Disk Storage Formatting a Disk F ormatting a Disk Description Only 1.44M, MS-DOS compatible disks can be used in the HP 37718A. Any other format or capacity will result in a disk access error being displayed. NO TE Disks can be formatted in an IBM compatible PC (1.44M, MS-DOS only) but it is recommended that the disk is for[...]

  • Página 142

    132 Using Instrument and Disk Storage Labeling a Disk Labeling a Disk Description Y ou can label your disks for ease of identification. HOW TO: 1 Choose DISK OPERATION . 2 Label the Disk using or press and use the pop-up keypad. 3 Choose to confirm the label is correct. The label is displayed at the bottom of the display to confirm the operation[...]

  • Página 143

    133 Using Instrument and Disk Storage Managing Files and Directories on Disk Managing F iles and Directories on Disk Description File and Directory structures can be important in speeding up the transfer of data between the instrument and the disk drive. It is recommended that you create a directory structure as an aid to efficient file managemen[...]

  • Página 144

    134 Using Instrument and Disk Storage Managing Files and Directories on Disk Accessing Directories and F iles 1 Choose DISK OPERATION . 2 Choose FILE TYPE you wish to view . This acts as a filter on the filename extension: - . CNF filter , - .SMG filter , - .PRN filter , - .BMP filter . 3 Move the highlighted cursor to the NAME field and pre[...]

  • Página 145

    135 Using Instrument and Disk Storage Managing Files and Directories on Disk NO TE T itle Bar - File types displayed and current directory . (cannot be highlighted). . <DIR> - Current Directory . . . <DIR> - P arent directory . Move highlighted cursor to this line and press to move to parent directory . SONET1.PRN - File (with named ext[...]

  • Página 146

    136 Using Instrument and Disk Storage Managing Files and Directories on Disk Renaming a File on Disk Description Files can be renamed as an aid to efficient file management. HOW TO: 1 Choose DISK OPERATION . 2 Enter the FROM filename using or Choose the directory which contains the file to be renamed. See "Accessing Directories and Files &[...]

  • Página 147

    137 Using Instrument and Disk Storage Managing Files and Directories on Disk Deleting a File on Disk Description Obsolete files can be deleted as an aid to efficient file management. HOW TO: 1 Choose DISK OPERATION . 2 Choose the directory containing the file to be deleted. See "Accessing Directories and Files " page 134. 3 Enter the [...]

  • Página 148

    138 Using Instrument and Disk Storage Managing Files and Directories on Disk Deleting a Directory on Disk Description Obsolete Directories should be deleted as an aid to efficient file management. NO TE A directory cannot be deleted until all the files within the directory have been deleted. See "Deleting a File on Disk " page 137. HOW[...]

  • Página 149

    139 Using Instrument and Disk Storage Managing Files and Directories on Disk Adding Descriptors to Disk F iles Description When storing configurations or graphics on disk, you can give them an easily remembered descriptor for identification at a later date. Descriptors can be added to .CNF and .SMG files . HOW TO: 1 Choose the directory containi[...]

  • Página 150

    140 Using Instrument and Disk Storage Saving Graphics Results to Disk Saving Graphics Results to Disk Description Graphics results can be saved to a file on disk. Two methods of naming the file, whic h is created when the measurement is started, are available: Automatic A filename in the form meas001 is created automatically without any action f[...]

  • Página 151

    141 Using Instrument and Disk Storage Saving Graphics Results to Disk 2 Choose the directory in which to save the graphics results . See "Accessing Directories and Files " page 134. 3 If you wish to enter your own choice of filename , choose DISK OPERATION FILE TYPE . 4 Move the highlighted cursor to NAME and enter the filename using or[...]

  • Página 152

    142 Using Instrument and Disk Storage Saving Data Log ging to Disk Saving Data Logging to Disk Description Data Logging can be saved to a file on disk. The disk can be transferred to a personal computer (PC) and the logging investigated at a later date. HOW TO: 1 Choose the directory in which to save the logging results . See "Accessing Direc[...]

  • Página 153

    143 Using Instrument and Disk Storage Saving Configurations to Disk Saving Configurations to Disk Description Y ou can store a large number of measurement settings which are used regularly and recall them when required. Configurations can be stored to a file on the floppy disk. The floppy disk can be used in other instruments which have the s[...]

  • Página 154

    144 Using Instrument and Disk Storage Recalling Configuration from Disk Recalling Configuration from Disk Description If a configuration has been stored on disk, you will need to recall it at some time in the future to configure the instrument. HOW TO: 1 Choose the directory that contains the configuration file to be recalled. See "Acces[...]

  • Página 155

    145 Using Instrument and Disk Storage Recalling Graphics Results from Disk Recalling Graphics Results from Disk Description If graphic results have been stored on disk, you will need to recall them in able to view the results on the . display . HOW TO: 1 Choose the directory that contains the graphics file to be recalled. See "Accessing Direc[...]

  • Página 156

    146 Using Instrument and Disk Storage Copying Configuration fr om Instrument Store to Disk Copying Configuration from Instrument Store to Disk Description If you have a configuration stored in the instrument store that you wish to use on another instrument, you can copy it to disk. The configuration can then be downloaded from the disk in to an[...]

  • Página 157

    147 Using Instrument and Disk Storage Copying Configuration fr om Instrument Store to Disk 3 T o copy the configuration from instrument to Disk choose . If you have entered a filename which already exists , a w arning "File exists - are you sure you wish to continue" is displayed. If YES is selected, the data on the Disk will be overwr[...]

  • Página 158

    148 Using Instrument and Disk Storage Copying Configuration fr om Disk to Instrument Store Copying Configuration from Disk to Instrument Store Description If you have a configuration stored in the instrument store that you wish to use on another instrument, you can copy it to Disk. The configuration can then be downloaded from the disk in anoth[...]

  • Página 159

    149 Using Instrument and Disk Storage Copying Configuration fr om Disk to Instrument Store 4 T o copy the configuration from Disk to instrument, choose . If you have entered a instrument store number which already contains a configuration, a warning "Are you sure you wish to continue" is displayed. If YES is selected, the data in the i[...]

  • Página 160

    150 Using Instrument and Disk Storage Copying Graphics Results fr om Instrument Store to Disk Copying Graphics Results from Instrument Store to Disk Description Y ou can copy Graphics Results from the instrument store to the Disk. This is useful under the following conditions: • If you have graphics results stored in the instrument that you wish [...]

  • Página 161

    151 Using Instrument and Disk Storage Copying Graphics Results fr om Instrument Store to Disk 4 If you wish to view the graphic results at a later date via a spreadsheet, choose FORMA T . CSV is Comma Separated V ariable. If you wish to view the graphic results at a later date on an HP 37718A, choose FORMA T . 5 T o copy the configuration from ins[...]

  • Página 162

    152 Using Instrument and Disk Storage Copying Graphics Results fr om Instrument Store to Disk[...]

  • Página 163

    6 6 Selecting and Using "Other" F eatures[...]

  • Página 164

    154 Selecting and Using "Other" F eatures Coupling T ransmit and Receive Settings Coupling T ransmit and Receive Settings Description When generating and measuring at the same interface level, you can have the transmit and receive settings coupled together . Any settings change made on the transmit display will automatically occur on the [...]

  • Página 165

    155 Selecting and Using "Other" F eatures Setting Time & Date Setting T ime & Date Description When making Bit error measurements and recording results you can have certain events timed chronologically , for example , Alarms; Error Seconds . The capability to set the Time and Date is provided on the display . HOW TO: 1 Choose CLOC[...]

  • Página 166

    156 Selecting and Using "Other" F eatures Enabling K eyboar d Lock Enabling Keyboard Lock Description Y ou can protect the measurement settings from interference during a test. This function is provided in the HP 37718A on the display . The following keys are not affected by Keyboard Lock: • Display keys ; ; ; ; • cursor keys and • [...]

  • Página 167

    157 Selecting and Using "Other" F eatures Enabling Beep on Received Err or Enabling Beep on Received Error Description Y ou can have an audible indication of an error whic h is particularly useful when the display on the test set is hidden from view . This function is provided in the HP 37718A on the display . HO W T O: 1 Choose BEEP ON R[...]

  • Página 168

    158 Selecting and Using "Other" F eatures Suspending T est on Signal Loss Suspending T est on Signal Loss When running a test, you can choose to suspend the test during periods of signal loss . This function is available on the display . HO W T O: 1 Choose SUSPEND TEST ON SIGNAL LOSS . O THER MISCELLANEOUS ON[...]

  • Página 169

    159 Selecting and Using "Other" F eatures Setting Error Threshold Indication Setting Error Threshold Indication Description When making error measurements , you can have an indication of when an error count or error ratio threshold has been exceeded. Y ou can set the HP 37718A to indicate this by a color change , from yellow to red, of th[...]

  • Página 170

    160 Selecting and Using "Other" F eatures Setting Screen Brightness and Color Setting Screen Brightness and Color Description The HP 37718A screen can be set to single or two color using the COLOR P ALETTE selection on the , display . The screen brightness can be set to full or half brightness . The half brightness setting is used when th[...]

  • Página 171

    161 Selecting and Using "Other" F eatures Dumping Display to Disk Dumping Display to Disk Description The chosen display ma y be stored on disk in bitmap format using the Screen Dump feature of the HP37718A. Logging and Floppy Disk must be set up for screen dump. The current displa y is stored on disk when . is pressed. HOW TO: 1 Choose L[...]

  • Página 172

    162 Selecting and Using "Other" F eatures Dumping Display to Disk 4 Choose the directory in which to save the Screen Dump . See "Accessing Directories and Files " page 134. 5 If you wish to enter your own choice of filename , choose DISK OPERATION FILE TYPE . NO TE Y ou have the option of an auto generated filename or entering[...]

  • Página 173

    163 Selecting and Using "Other" F eatures Running Self T est Running Self T est Description Before using the HP 37718A to make measurements , you can run Self T est ALL TESTS to ascertain the integrity of the HP 37718A. These tests take between at least 1 hour to complete depending on the options fitted. Alternatively you can run Confid[...]

  • Página 174

    164 Selecting and Using "Other" F eatures Running Self T est NO TE If any or all of these connections are not made the HP 37718A will F AIL Self T est. 4 Press to activate the Self T est. TEST STA TUS RUNNING will be displayed. The information pertaining to TEST TYPE, TEST NUMBER and SUBTEST NUMBER will change as the Self T est progresses[...]

  • Página 175

    165 Selecting and Using "Other" F eatures Running Self T est 4 Press to activate the Self T est. TEST STA TUS RUNNING will be displayed. The information pertaining to TEST TYPE, TEST NUMBER and SUBTEST NUMBER will change as the Self T est progresses. If the HP 37718A is functioning correctly , after a time of 2 to 3minutes, TEST STA TUS P[...]

  • Página 176

    166 Selecting and Using "Other" F eatures Running Self T est[...]

  • Página 177

    A ppendix A 7 STS-1 SPE Backgr ound Patter ns The follo wing tables list the background patterns av ailable when selecting specific foregrounds.[...]

  • Página 178

    168 STS-1 SPE Backg round P atter ns T able 2 STS-1 SPE Backgr ound Patterns Foreground Backgr ound choice in Foreground TUG-3 Backgr ound choice in other A U-3 STS-1 SPE --------- VT -1.5, VT -2 Mapping or SPE W ord (8 bit user programmab le word). VT -6 P attern in other VT -6s is numbered. They contain the word 11NNNNNx, where NNNNN is the binar[...]

  • Página 179

    A ppendix B 8 ETSI/ANSI T erminology A table of ETSI terms with their ANSI equivalents .[...]

  • Página 180

    170 ETSI/ANSI T er minology ETSI/ANSI Con version and Equiv alent T erms ETSI/ANSI Con version and Equiv alent T erms Introduction The terminology used on the instrument display can be ETSI (SDH) or ANSI (SONET) terminology . Refer to the table given in this appendix for an explanation of equivalent SDH/SONET terms . ETSI: European T elecommunicati[...]

  • Página 181

    171 ETSI/ANSI T er minology ETSI/ANSI Con version and Equiv alent T erms MS-RDI Line FERF / RDI-L Multiple xer Section Ov erhead Line Ov erhead Network Node Interf ace Line Interf ace OOF SEF (se verely errored fr ame defect) P ath AIS / A U-AIS AIS-P P ath REI / HP REI REI-P P ath FERF / HP RDI RDI-P P ath IEC / A U-IEC IEC-P P ath Ov erhead P ath[...]

  • Página 182

    172 ETSI/ANSI T er minology ETSI/ANSI Con version and Equiv alent T erms NOTE: VC is an ETSI abbreviation for Virtual Container and an ETSI / ANSI abbreviation for (ATM) V irtual Channel. The context of VC must therefore be taken into account when converting between standards . TU VT TU-11 VT 1.5 TU-12 VT 2 TU-2 VT 6 TU-3 NONE TU BIP VT BIP (CV -V)[...]

  • Página 183

    Index 173 A Alarm scan DSn, 83 SONET, 82 Alarms & errors DSn add, 50 DSn payload add, 50 SONET add, 49 Analysis measurement DSn, 71 DSn payload, 71 SONET, 70 APS messages generation, 64 monitoring, 25 test function, 64 Automatic protection switch message generation, 64 Autotolerance, 89 B B/G mapping selection SONET, 5 Background mapping select[...]

  • Página 184

    174 Index G G.821 analysis measurement, 71 G.826 analysis measurement, 71 Graphics copy results from instrument to disk, 150 logging displays, 105 recall results from disk, 145 recall stored results, 99 saving results to disk, 140 saving to instrument, 98 storage resolution, 98 viewing error & alarm summaries, 103 viewing the bar graphs, 101 H [...]

  • Página 185

    Index 175 Overhead sequence repeat run, 27 single run, 27 P Paper change internal printer, 122 Parallel port connecting Centronics printer, 121 Path overhead capture and display, 29 insertion, 27 Payload analysis measurement, 71 DSn receive, 16 DSn transmit, 3 errors & alarms, 50 framing SONET transmit, 5 framing, SONET receive, 17 insert exter[...]

  • Página 186

    176 Index APS messages, 64 DCC insert, 65 errors & alarms DSn, 50 errors & alarms SONET, 49 MSP messages, 64 overhead BER test, 68 overhead capture, 29 pointer adjustments, 54 pointer graph, 61 sequence generation, 27 spare bits, 53 stress test, 63 tributary scan, 80 Test period selection, 69 Test signal drop external, 46 insert external, 4[...]

  • Página 187

    Hewlett-Packard Sales and Service Offices If you need technical assistance with a Hewlett-P ackard test and measurement product or application please contact the Hewlett-P ackard office or distributor in your country . Asia P acific: Hong Kong: T el: (852) 2599 7889 India: T el: (91-11) 682-6000 Japan: Hewlett-P ackard J apan Ltd. Measurement Ass[...]

  • Página 188

    Hewlett-Packard Sales and Service Offices (cont’d) Finland: T el: (90) 88 721 France: T el: (0)1 69.82.60.60 Germany: T el: (0180) 532 62-33 Greece: T el: 30-1-7264045 Hungary: T el: 36-1-4618219 Ireland: T el: (01) 284 4633 Israel: T el: 972-3-5380333 Italy: T el: 02 - 92 122 241 Netherlands: T el: (020) 547 6669 Norway: T el: (22) 73 57 50 Pola[...]

  • Página 189

    About This Edition This is the 2nd edition of the DSn/SONET Users Guide. It documents the product as of December 1998. Edition dates are as follo ws: 1st Edition, Sept. 1998 2nd Edition, Dec. 1998  Copyright He wlett- Packard Ltd. 1998. All rights reserved. Reproduction, adaption, or translation without prior written permission is prohibited, ex[...]

  • Página 190

    Printed in U.K. 12/98 37718-90022 In This Book This book tells you ho w to select and use the v arious instrument functions av ailable.[...]