JVC UX-P3 Bedienungsanleitung

GVT0053-014A [UB] For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No . Se r ia l N o. UX-P3 — Consists of CA-UXP3 and SP-UXP3. MICRO COMPONENT SYSTEM INSTRUCTIONS COMPACT DIGITAL AUDIO CD TAPE FM/AM MICRO COM[...]

W arnings, Cautions and Others Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. – G-1 – UX-P3[UB]_safety 01.3.27, 9:40 AM 2[...]

– G-2 – CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any naked flame sources, such as lighted candles, on the apparatus. • When discarding batteries, environmental problems must be considered a[...]

UX-P3 Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below . 3 Bottom: Place on the level surface. Maintain an adequate air path for ve[...]

IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS / 1 CLASSIFICATION LABEL, PLACED ON REAR ENCLO- SURE 2 WARNING LABEL, PLACED INSIDE THE UNIT CLASS 1 LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2. CAUTION : Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION : Do not open the top cover. Ther[...]

– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons on the remote contr ol. Y ou can use the buttons both on the r emote control and on the unit f or the same operations if they ha ve the same or similar names (or marks), unless mentioned otherwise. • [...]

– 2 – English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started ............................................................ 6 Supplied Accessories ....[...]

– 3 – English COMPACT DIGITAL AUDIO CD T APE FM/AM MICRO COMPONENT SYSTEM UX-P3 CD-R/RW PLA YBACK AUX TIMER CLOCK STANDBY STANDBY / ON VOLUME FUNCTION SOUND DIRECT OPERA TING AHB PRO REC REV .MODE PHONES q o ; a 1 t / 2 4 w r s AUTO REVERSE AUTO T APE SELECTOR 3 5 6 7 8 9 p e y u i Location of the Buttons and Controls Become familiar with the b[...]

– 4 – English See pages in the parentheses for details. Front Panel 1 Remote sensor 2 (ST ANDBY/ON) button and ST ANDBY lamp (9, 14, 19) 3 T APE 2 3 b utton (10, 15, 16) Pr essing this button also turns on the unit. 4 CD 3 / 8 (play/pause) b utton (10, 12, 17) Pr essing this button also turns on the unit. 5 AHB (Activ e Hyper Bass) PRO b utton [...]

– 5 – English SLEEP ST ANDBY/ON AUX FM/AM T APE CD DISPLA Y REPEA T RANDOM PROG FM MODE AUTO PRESET SOUND MODE CD CANCEL MUL TI KEY SET RM-SUXP3U REMOTE CONTROL VOLUME AHB PRO 5 6 7 8 9 q 4 1 3 p w t u i o ; a s y  r e 2 Remote Control 1 REPEA T button (14) 2 DISPLA Y button (9) 3 PR OG (program) button (13) 4 RANDOM button (14) 5 SOUND MODE[...]

– 6 – English Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately . Putting the Batteries int[...]

– 7 – English RIGHT LEFT SPEAKER IMPEDANCE MIN 4 MAIN SPEAKERS 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. • If the AM loop antenna wire is cov ered with vinyl, remo ve the vinyl by twisting it as shown in the dia gram. 2 T urn the AM loop antenna until you ha ve the best r eception. T o connect an outdoor AM antenn[...]

– 8 – English Connecting Other Equipment Y ou can connect both of the analog and digital equipment. • DO NOT connect any equipment while the power is on. • DO NOT plug in any equipment until all connections are complete. T o connect audio equipment Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left aud[...]

– 9 – English Common Operations T urning On the Power When you press the play b utton — CD 3 / 8 , T APE 2 3 , or the source selecting button — FM/AM, and A UX, the unit automatically turns on and starts playback if the source is ready . T o turn on the unit, press (ST ANDBY/ON). The ST ANDBY lamp on the unit goes out. T o turn off the unit[...]

– 10 – English Reinforcing the Bass Sound Y ou can reinforce the bass sound to maintain rich (“ AHB 1” and “ AHB 2”), full bass at low v olume. This function only affects the pla yback sound, but does not af fect your recording. T o get the effect, press AHB (Activ e Hyper Bass) PR O until “ AHB 1” or “ AHB 2” appears on the dis[...]

– 11 – English Listening to FM and AM Broadcasts T uning in a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in the previously tuned sta tion (either FM or AM). • Each time you press the button, the band alternates between FM and AM. 2 Pr ess and hold ¢ or 4 f or more than 1 second. The unit starts searching for stations a[...]

– 12 – English Playing Back CDs (CD/CD-R/CD-RW) This unit has been designed to playback the follo wing CDs: •C D • CD-R • CD-R W Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. General Notes In general, you will hav e the best performance by keeping your CDs and the mechanism clean. • Store CDs i[...]

– 13 – English MULTI KEY T rack number Program step number PRGM PRGM SET Programming the Playing Order of the T racks — Program Play Y ou can arrange the order in which tracks play before you start playing. Y ou can program up to 20 tracks. On the r emote control ONL Y : 1 Load a CD . • If the current playing source is not the CD player , p[...]

– 14 – English Prohibiting Disc Ejection — T ray Lock Y ou can lock the disc tray and prohibit to eject the CD. • This is possible only while the unit is turned on. On the unit ONL Y : T o prohibit disc ejection, press (ST ANDBY/ON) while holding 7 . (If the disc tray is opened, close it first.) “LOCKED” appears for a while, and the dis[...]

– 15 – English Playing Back T apes Y ou can play back type I, type II, and type IV tapes without changing any settings. Playing Back a T ape 1 Pr ess 0 for cassette deck. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder gently . 4 Pr ess T APE 2 2 2 2 2 3 3 3 3 3 . The unit automatically turns on and the t[...]

– 16 – English Recording Recording on a T ape On the unit ONL Y : 1 Put a recordable cassette in with the e xposed part of the tape down. 2 Close the cassette holder gently . • If you want to record on both sides of a tape, see “T o record on both sides — Re verse Mode. ” 3 Check the r ecording direction f or the tape. • If the tape d[...]

– 17 – English CD Direct Recording Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you ha ve made for Program play . On the unit ONL Y : 1 Put a r ecordable cassette in with the exposed part of the tape down. 2 Place a disc correctl y on the circle of the disc tray , with its label side up. • If[...]

– 18 – English Using the T imers There are three timers a vailable — Daily T imer, Recor ding T imer , and Slee p Timer . Before using the timers, you need to set the clock built in the unit (see page 9.) When you press TIMER on the unit for more than 3 seconds, the display alternates between “ ADJUST” and “CLOCK” for about 5 seconds.[...]

– 19 – English 6 Pr ess TIMER to complete the timer setting . 7 Pr ess (ST ANDBY/ON) to turn off the unit (on standby) if y ou ha ve set the timer with the unit turned on. • When the timer turns on the unit, the timer ( ) indicator and the selected timer mode indicator ( D AIL Y or REC) start flashing. T o cancel the setting, press and hold T[...]

– 20 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly . • Do not touch the shiny surface of the disc, or bend the disc. • Put the disc back in its case after use to pre[...]

– 21 – English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been ph ysically damaged, call a qualified person, such as your dealer , for service. T roubleshooting Symptom No sound is heard. Hard to list[...]

– 22 – English Specifications Design and specifications are subject to change without notice. UX-P3 (CA-UXP3 and SP-UXP3) Amplifier Output Po wer: 44 W (22 W + 22 W) at 4 Ω (MAX.) 40 W (20 W + 20 W) at 4 Ω (10 % THD) Audio input sensitivity/Impedance (a t 1 kHz) A UX: 400 mV/48 k Ω Audio output lev el A UX: 260 mV/5.8 k Ω Digital output[...]

EN, CH 0401MWMMDWJEM VICT OR COMP ANY OF JAP AN, LIMITED UX-P3[UB]_Cover 01.3.27, 9:34 AM 2[...]