Zenoah EHT602D инструкция обслуживания

GB-1 G B eHT752S / eHT602D eHT752S eHT602D G B OWNER’S MANUAL HEDGE TRIMMER 848D3M93A1 (712)[...]

GB-2 eHT752S / eHT602D EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS 21.7 cm 3 21.7 cm 3 MODEL SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA measured 104.5 dB(A) 107.2 dB(A) guaranteed 106 dB(A) 110 dB(A) ISO 7916 racing 5.7 m/s 2 7.8 m/s 2 eHT752S eHT602D APPRO V AL NUMBER OF CE EXHA UST EMISSION REGULA TION e13 * 97/68SH2G3 * 2002/88 * 0109 * 02 W AR[...]

GB-3 G B eHT752S / eHT602D SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern cr itical points which must be taken into consideration to pre v ent possible serious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and f ollow them without f ail. W ARNINGS IN [...]

GB-4 eHT752S / eHT602D 2. Specification Model ........................................................................................... eHT752S / eHT602D Ty pe ................................................................................................ double-action type eHT752S / eHT602D .................................................. Sin[...]

GB-5 G B eHT752S / eHT602D 3. W ar ning labels on the machine 4. Symbols on the machine If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you pur chased the product to order new labels and af fix them in the r equired location(s). Never modify y our machine. We w on’t warrant the machine[...]

GB-6 eHT752S / eHT602D 2. Never use the product, a. when the ground is slippery or when you can’t maintain a steady posture. b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area. c. During rain, during storms at times of strong or [...]

GB-7 G B eHT752S / eHT602D BEFORE ST ARTING THE ENGINE 1. The area within a perimeter of 15 m of the person using the product should be consider ed a hazardous ar ea into which no one should enter . If necessary , yellow warning rope, warning signs should be placed around the pe- rimeter of the area. When work is to be perfor med simultaneously by [...]

GB-8 eHT752S / eHT602D • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be car eful if you are ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before[...]

GB-9 G B eHT752S / eHT602D ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq., carburation, ignition timing and por t timing) with- out addition of an y major hard ware or the intro- duction of an inert material during comb[...]

GB-10 eHT752S / eHT602D ST ARTING ENGINE W ARNING The cutting head will start moving upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surr ounding objects as it will start moving upon star ting of the engine. 3. Push th[...]

GB-11 G B eHT752S / eHT602D CUTTING WORK W ARNING • W eather conditions and altitude may effect carburation. • Do not allow an y one to stay c lose to the hedge- trimmer while working or while adjusting the car - b uretor . HOW TO USE : HANDLE (eHT602D) • T o r educe fatigue when trimming hedges, the handle can be swivelled through 90° to th[...]

GB-12 eHT752S / eHT602D 8. Maintenance (1) Bolt (2) Plate (3) Spacer (4) Nut Every Every Ever y 25 50 100 System/components Procedure Before hours hours hours Note use after after after fuel leaks, fuel spillage wipe out ✔ fuel tank, air filter , fuel filter inspect/clean ✔✔ r eplace, if necessary see adjusting replace carbur etor idle adjust[...]

GB-13 G B eHT752S / eHT602D 8. Maintenance (1) Safety lock SAFETY LOCK W ARNING • Stop operation when the safety lock is de- fective. • Safety lock is the device not to accelerate the throttle lever without intention. While pushing the safety lock, you can accelerate the throttle lever . 1. Check if the throttle lever does not move when you do [...]

GB-14 eHT752S / eHT602D 8. Maintenance ADJUSTING CARBURETOR The carburetor has been adjusted at the factory . Should your unit need readjustment due to the changes in alti- tude or operating conditions, please let your skillful dealer make the adjustment. A wrong adjustment may cause damage to your unit. THROTTLE WIRE PLA Y Throttle wir e play shou[...]

GB-15 G B eHT752S / eHT602D PROCEDURES TO BE PERFORMED AF- TER EVER Y 100 HOURS OF USE 1. Remove the muffler , insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time. 2. Tighten all screws, bolts, and fittings. 3. Check to see if any[...]

GB-16 eHT752S / eHT602D Limited warranty Should any failure occur on the pr oduct under normal operating conditions within the applicable warranty pe- riod, the failed part will be replaced or repair ed fr ee of charge by a ZENOAH authorized dealer . W ARRANTY PERIOD: 1 year (6 months if used pr ofes- sionally , and 30 days if used for rental purpo[...]