Zenoah BCZ3000DW инструкция обслуживания

GB-1 G B BCZ3000DL / BCZ3000DW BCZ3000DL BCZ3000DW G B OWNER’S MANUAL BRUSHCUTTERS 848JC293A0 (311)[...]

GB-2 BCZ3000DL / BCZ3000DW EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF DAMAGING HEARING IN NORMAL CONDITIONS OF USE, THIS MACHINE MA Y INVOL VE A DAIL Y LEVEL OF PERSONAL EXPOSURE TO NOISE FOR THE OPERA TOR EQUAL TO OR GREA TER THAN 85 dB(A) 29.5 cm 3 SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA measured 95.2 dB(A) 95.5 dB(A) gua[...]

GB-3 G B BCZ3000DL / BCZ3000DW SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail. W ARNINGS IN THE[...]

GB-4 BCZ3000DL / BCZ3000DW 2. Specification BCZ3000DL / BCZ3000DW Overall size (L  W  H) ............................. 1860 x 395 x 325 / 1860 x 610 x 520 mm Dry weight .................................................................................................. 5.7 / 7.1 kg Engine Model ..................................................[...]

GB-5 G B BCZ3000DL / BCZ3000DW 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer fr o[...]

GB-6 BCZ3000DL / BCZ3000DW ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the throttle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved[...]

GB-7 G B BCZ3000DL / BCZ3000DW could result in serious burns or elec- trical shock. • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W ar n adults to keep pets and children away fr om the area. Be car eful if you ar e ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you [...]

GB-8 BCZ3000DL / BCZ3000DW INST ALLING HANDLE (BC3000DL) • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. INST ALLING HANDLE (BC3000DW) 1. Loosen the 4bolts on the upper cap and insert the handles equally . Retighten the bolts. 2. Put the handle assembly into the bracket and put the upper cap over it. Ti[...]

GB-9 G B BCZ3000DL / BCZ3000DW ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion. • These engines are ce[...]

GB-10 BCZ3000DL / BCZ3000DW ST AR TING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine. 3.[...]

GB-11 G B BCZ3000DL / BCZ3000DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise. 2. W[...]

GB-12 BCZ3000DL / BCZ3000DW W ARNING CONTROLLING BLADE BOUNCE •K ick out can cause serious personal injury . Car efully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur . 1. What causes kick out: • Kick ou[...]

GB-13 G B BCZ3000DL / BCZ3000DW 2. Y ou can avoid thrown debris by sweeping from your left to the right. 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth. 4. Never swing the unit so hard as you ar e in danger of lo[...]

GB-14 BCZ3000DL / BCZ3000DW AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water as requir ed. Dr y completely before in- stalling. If the element is broken or shrunk, r eplace with a new one. FUEL FIL TER • When the engine runs short of fuel supply , check the[...]

GB-15 G B BCZ3000DL / BCZ3000DW IMPORT ANT • Note that using any spark plug other than those des- ignated may result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged. • To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench. [...]

GB-16 BCZ3000DL / BCZ3000DW 11. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment scr ew → out of normal range → adjust to normal range sparking (no spark) → spark plug is fouled/wet[...]