Zenoah BC2604DL инструкция обслуживания

GB-1 G B BC2604DL / BC2604DW BC2604DL BC2604DW G B OWNER’S MANUAL BRUSHCUTTERS 848JB593A1 (704)[...]

BC2604DL / BC2604DW GB-2 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS APPRO V AL NUMBER OF CE EXHA UST EMISSION REGULA TION DIRECTIVE 97/68/EC AMENDED 2002/88/EC e13*97/68SH2G3*2002/88*0104*03 MODEL SOUND LEVEL VIBRA TION LEVEL EN 27917 ISO 10884 ISO 7916 L pAav L WA (guaranteed) idling racing BC2604DL 25.4 cm 3 97 dB(A) 112 dB(A) 4.6 m/s 2 5.3 m/s[...]

GB-3 G B BC2604DL / BC2604DW SAFETY FIRST Instructions contained in warnings within this manual mar ked with a symbol concern cr itical points which must be taken into consideration to pre vent possib le serious bodily injur y , and f or this reason y ou are requested to read all such instructions carefully and follo w them without f ail. W ARNINGS[...]

BC2604DL / BC2604DW GB-4 2. Specification BC2604DL / BC2604DW Overall size (L 3 W 3 H) ............................ 1800 x 395 x 315 / 1800 x 610 x 520 mm Dry weight .................................................................................................. 5.1 / 5.5 kg Engine Model ...........................................................[...]

GB-5 G B BC2604DL / BC2604DW 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer fr om [...]

BC2604DL / BC2604DW GB-6 ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the thr ottle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved [...]

GB-7 G B BC2604DL / BC2604DW • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be car eful if you are ap- proached. Injury may result fr om flying debris. 2. If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine [...]

BC2604DL / BC2604DW GB-8 INST ALLING DEBRIS GUARD FOR LINE HEAD • Attach the debris guard (RED) with the bolts pr ovided. INST ALLING LINE HEAD 1. While locking the gear shaft by inserting the supplied tool into the upper holder on the gear box, loosen and remove the bolt (left-handed). 2. Fit the line head assembly to the gear shaft by using bol[...]

GB-9 G B BC2604DL / BC2604DW 7. Fuel ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 <when using ZENOAH genuine oil> • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq., carburation, ignition timing and por t timing) with- out addition of an y major hard ware or the intro- duction of an inert mate[...]

BC2604DL / BC2604DW GB-10 ST ARTING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine. 3. Pu[...]

GB-11 G B BC2604DL / BC2604DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise. 2. When th[...]

BC2604DL / BC2604DW GB-12 W ARNING CONTROLLING BLADE BOUNCE •K ick out can cause serious personal injury . Carefully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur . 1. What causes kick out: • Kick out c[...]

GB-13 G B BC2604DL / BC2604DW 2. Y ou can avoid thrown debris by sweeping from your left to the right. 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth. 4. Never swing the unit so hard as you ar e in danger of losi[...]

BC2604DL / BC2604DW GB-14 AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water as requir ed. Dry completely before in- stalling. If the element is broken or shrunk, r eplace with a new one. FUEL FIL TER • When the engine runs short of fuel supply , check the fu[...]

GB-15 G B BC2604DL / BC2604DW IMPORT ANT • Note that using any spark plug other than those des- ignated ma y result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged. • To install the spark plug, first tur n the plug until it is finger tight, then tighten it a quar ter turn more with a sock et wrench[...]

BC2604DL / BC2604DW GB-16 Limited warranty Should any failure occur on the pr oduct under normal oper - ating conditions within the applicable warranty period, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer . W ARRANTY PERIOD: 1 year (6 months if used profession- ally , and 30 days if used for rental purp[...]