Zanussi ZI 7165 инструкция обслуживания

REFRIGERA TOR ZI 7165 ZDC 57 L 2222743-29 INSTRUCTION BOOKLET[...]

2 Instructions for the user Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Setting the temperature 5 Fresh food refrigeration 5 The door shelves 5 Drink dispenser 6 Health and safety guidelines 6 Cool Check Guide 7 Positioning of the Cool Check 7 If the Cool Check shows too warm 7 Defrosting 8 Normal Operati[...]

Important Safety Instructions These warnings are provided in the interests of your safety . Ensure that you understand them all before installing or using this appliance. Y our safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Departement. Prior to Installation ■ Check the a[...]

Description of the Appliance A - Dairy compartment B - Can storage shelf C - Drink dispenser D - Bottle storage shelf E - Salad drawer F - Glass shelf (for storing fresh meat) G - Cool check temperature guide H - Storage shelves I - Meat box K -Thermostat control 4[...]

5 Before use Remove all securing tapes. W ash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger . Dry thoroughly . Setting the temperature The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions and one «OFF»[...]

Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever . The following tips should help you to ensure that the food in your home is in as perfect condition as possib[...]

7 The guide consists of a temperature sensitive strip sealed in a shelf trim. When the fridge is operating at the safe temperature to store food the guide will appear black. If the temperature rises above this level the guide will show the words T OO WARM. Positioning of the Cool Check The shelf with the cool check temperature guide must be placed [...]

The refrigerator automatically defrost every time the compressor stops. The water is discharged, via the pipe, into a tray located at the back of the appliance above the compressor , where it evaporates. Important T o avoid defrost water overflowing into the fridge, periodically clean the water discharge hole in the centre of the V shaped drip coll[...]

Before any maintenance or cleaning work is carried out, DISCONNEC T the appliance from the ELECTRICIT Y suppl y . Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughl y . NEVER US E DETERGENTS, ABRASIVE POWDERS, HIGH L Y PERFUMED CLEANING PRODUCTS OR W AX POL[...]

Something not W orking? 10 If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for any in-guarantee[...]

11 Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning: 0870 5 929929 Y our call will be routed to the Service Force Centre covering your post code area. The address of your local Service Force Centre is detailed in the[...]

12 Standard guarantee conditions We, Zanussi Limited, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour , materials or carriage on condition that[...]

POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 1 10 W A VERAGE DAIL Y UNITS ELECTRICITY 0,75 kWh GROSS CAP ACITY 160 l NET CAP ACITY 158 l T echnical specifications Positioning The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.; best performance is obtaine[...]

Electrical Connection W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug should th[...]

Instructions for totally built-in appliance Dimensions of the recess Height of housing 880 mm Depth of housing 550 mm Width of housing 560 mm For appropriate venting, follow indications in the figure. Push the appliance into the housing until stop strip (A) touches the kitchen unit. Open the door and push the appliance against the side of kitchen f[...]

Apply covers (B) on joint cover lugs and hinge holes. Position the runners (H) at the top and bottom of the inside of the kitchen unit as shown in the figure and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3,5x16 mm screws. Open both the appliance door and that of the kitchen [...]