VDO Dayton MS 4150 RS инструкция обслуживания

MS 4150 RS MP3 Owner’s manual and mounting instruction Mode d’emploi et manuel d’installation Bedienungs- und Einbauanleitung Gebruiksaanwijzing en inbouwhandleiding Istruzioni d’uso e d’installazione www.vdodayton.com English Français Deutsch Nederlands Italiano[...]

Attention! Only use this system when it is safe to do so. It is more important to keep your eyes on the road and your hands on the wheel. Due to constantly changing traffic conditions, we unfortunately cannot guarantee 100 % precision under all circumstances. Attention ! N’utilisez le système que si vous ne mettez pas en danger votre vie ou cell[...]

A +12V RR FR FL RL SDVC [A1] [A2] [A5] [A4] [A6] [A8] [A7] [A3] B B' A' F A B F E J +30˚ -10 ˚ 14 Remote CD Changer TMC receiver Tel. in Power Amplifier[...]

MS 4150 RS MP3 Connector Overview ISO chamber A: Pin Connection A1 Input digital speedometer signal / SDVC / GALA A2 Switch input reversing signal (reversing light plus) A3 Switch input telephone mute function A4 + 12 V permanent positive; terminal 30 A5 Switch output for electronic antenna /relay motor antenna A6 Switch input pilot light A7 +12 V [...]

5 Illustrations . . . . . . . . . . . . . . . . . . . Page 3 Sommaire . . . . . . . . . . . . . . . . . . . Page 77 Instructions de montage . . . . . . . . . . . Page 85 Mode d’emploi . . . . . . . . . . . . . . . . Page 91 Récapitulatif des menus . . . . . . . . . . . Page 145 Abbildungen . . . . . . . . . . . . . . . . . . Seite 3 Inhalt . . .[...]

6[...]

Contents GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Notes on operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Class 1 laser product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Theft protection . . . . . . . . . . . . . . . . . . . . . [...]

C-IQ – INTELLIGENT CONTENT ON DEMAND . . . . . . . . . . . . . . . . . . . . . . . . 39 C-IQ - Your key to map, traffic and travel information . . . . . . . . . . . . . . . . . 39 NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 4 Main control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Notes on operating instructions The following reading aids are used to simplify these operating instructions: ☞ requests you to perform an action. : shows the unit’s reaction. ✎ provides additional information – identifies a list. A Safety instructions and warnings contain important information for the safe use of the unit. Failure to obser[...]

Safety instructions A The use of the navigation radio by no means relieves the driver of his/her responsibilities. The highway code must always be observed. Always observe the current traffic situation. A The applicable traffic regulations and the prevailing traffic situation always take precedence over the instructions issued by the navigation sys[...]

How does the navigation system work? The position and movements of the vehicle are recorded by the navigation system’s sensors. The distance travelled is determined by the vehicle speedometer signal, rotary motion in curves is detected by a gyro sensor (inertial compass). The position is determined via the GPS (Global Positioning System) satellit[...]

The digital road map To be able to plan a route to a destination address, the navigation system not only requires the current position of the vehicle but also a digital road map containing the destination address itself and the roads leading to the destination address. This digital road map is on the map CD which you insert into the navigation comp[...]

Route & Sound - Navigating and listening to an audio CD With the new generation of our navigation radio units, you may insert a map CD, plan your route, then insert an audio CD and the system will still guide you to your intended destination. The navigation computer saves the road system in a defined area around the planned route (corridor) in [...]

RDS (Radio Data System) Many FM stations transmit RDS information. The navigation radio evaluates the RDS telegram and offers the following advantages: – PS ( P rogram S ervice Name): Display of station name, – PTY ( P rogram TY pe): Station selection by program type, ➽ page 31 – AF ( A lternative F requency): Automatic re-tuning to best al[...]

IMPORTANT INFORMATION Please read this information carefully and follow the all the instructions outlined below. This will ensure the reliable operation and long service life of your navigation radio. Keep the packaging and operating instructions in a safe place in order to pass them on to a subsequent owner in the event of selling the unit at a la[...]

Connection overview , ISO chamber A, Fig. 2: Pin Connection A1 Input digital speedometer signal / SDVC A2 Switch input reversing signal (reversing light plus) A3 Switch input telephone mute function A4 + 12 V permanent positive; terminal 30 A5 Switch output for electronic antenna /relay motor antenna A6 Switch input pilot light A7 +12 V ignition po[...]

■ Reversing signal (A2): ☞ Connect pin A2 to a suitable reversing signal point (positive lead of reversing lamp). Note: Operation of the navigation system is not possible without a reversing signal. The absence of a reversing signal may lead to inaccurate navigation. ■ T elephone mute function (A3), optional: ☞ Connect pin A3 to the mute fu[...]

Optional connections ISO chamber C, Fig. 4 - 6 ■ Line-out (yellow connector C1): (adapter cable, accessories) An amplifier with additional loudspeakers can be connected to the unit via this connector. ■ T elephone input (green connector C2): (adapter cable, accessories) ☞ Connect the loudspeaker output of your mobile phone or hands-free unit [...]

Install installation bracket, Fig. 8 - 10 The navigation radio can be installed into a vehicle’s DIN radio slot using the installation bracket provided. ■ Note before installing, Fig. 13: ✎ The radio must be installed horizontally. Deviations of - 10 to + 30 degrees can be set in the “Mounting angle” menu (see “Initial operation”). La[...]

■ Setting the mounting angle In order to ensure perfect functioning of the system, the navigation radio must be set to the actual mounting angle in the instrument panel. 1. In navigation mode: Select the “ Mounting angle ” option in the “ System settings ” menu. 2. Depending upon the installation, set the angle to between -10 and +30 degr[...]

Control elements 1 o . . . . . . . . . . . . Release button for operating panel 2 SOUND . . . . . . . . Opens the “ SOUND ” menu. ➽ page 27. 3 POWER/VOLUME . Press: Switching on / off . . . . . . . . . . . . . . Turn: Setting the volume 4 INFO . . . . . . . . . . Opens the “ INFORMATION ” menu. ➽ page 25. 5 1 ... 6 . . . . . . . . . Rad[...]

Inserting a CD 1. Open the front panel. 2. Insert the CD into the drive (printed side up). For audio CDs, playback starts automatically. 3. Close the front panel. Removing a CD 1. Open the front panel. 2. Press the eject button. 3. Carefully remove the CD and close the front panel. Switching on / off ☞ Press the POWER/VOLUME knob to switch the un[...]

Menu operation Cursor The currently selected line or field on the screen is designated as the cursor. The cursor is identified by an inverse field (bright letters on black background). ☞ Move the cursor by turning the right rotary control. ☞ Confirm by pressing the right rotary control. : To confirm, the cursor will be displayed briefly as a fr[...]

Options for entering characters The line at the bottom of the display displays command symbols which allow you to perform the following functions: c : Destination country selection (in this case, “D” for Germany). ƒ : Save an address in the personal address book. ‰ : Jump to menu “Special dest.”. ➽ page 48. ¡ : Delete the character en[...]

The “INFORMA TION” menu The “ INFORMATION ” menu allows you to configure the type and amount of information the unit will receive via the radio data system (RDS). ☞ Press the INFO button. : The “ INFORMATION ” menu is displayed. The following options are available: TMC Scan (T raffic Message Channel) If you activate this function, the[...]

Behaviour of TMC and T A If you switch on TMC Scan, you ensure that the radio will only search for stations transmitting TMC data during the automatic search. If the reception quality of the TMC station deteriorates drastically, the unit will indicate this by outputting a warning message. If you do not need guidance or are listening to an audio CD,[...]

The “SOUND” menu In the “ SOUND ” menu, you can set your navigation radio’s sound and several other sound reproduction parameters to your own preferences. The sound settings for bass and treble/tone are valid for the currently active sound source (radio, CD or CDC). ☞ Press the SOUND button. : The “ SOUND ” menu is displayed. The fo[...]

SDVC (speed-dependent volume increase) To compensate for environmental noise, the volume for audible information increases as a function of the speed. ☞ Choose a setting for the speed-dependent increase of the volume. ☞ Select OFF to deactivate the function or select 1 to 5 to choose the desired volume increase. 1 is the lowest, 5 the highest v[...]

Listening to radio If the unit is not yet in radio mode: ☞ Press the RADIO button. Select waveband In radio mode: ☞ Press the RADIO button again. ☞ Select the desired waveband and press the right rotary control. ✎ The following wavebands are available: FM A, FM B, FM AST (Autostore) MW, MW AST (Autostore), SW and LW. Six stations can be sto[...]

Setting frequency manually ☞ Activate “Manual tuning” in the radio menu. ➽ next page. ☞ Slowly turn the right rotary control to the right or left in order to change the reception frequency step-by-step. ☞ Turn the control quickly by a few notches in order to start a fast search. Press the control to stop the search. ☞ Press the contro[...]

Manual T uning ☞ Select this option to set a frequency manually, for example, if the desired station cannot be set using the automatic search function. See previous page for this function. PTY Search (only in FM) This function allows you to search for stations of the desired program type. ☞ Select the desired program type from the list. ☞ Pre[...]

CD player You can play 12 cm audio CDs and discs with MP3 files on your CD player. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A Do not insert DVDs or shaped CDs in the CD player. If you ignore these recommendations, you risk damaging your unit. ✎ The system may not be able to pla[...]

■ ID3 tag display For MP3 CDs, the currently selected directory and below it the ID3 tag (title and artist) of the current piece of music will be displayed. ✎ When a new track is played, the file name is shown briefly first, followed by the ID3 tag. ✎ The file name can be displayed briefly at any time by pressing the CLEAR button. ✎ If ther[...]

The “CD” menu In CD player mode: ☞ Press the MENU button. : The “ CD ” menu is displayed. The following functions are available: Manual Search ☞ Activate this function in order to perform a manual search using the right rotary control. ☞ Turn the right rotary control one notch to the right or left in order to start the first level of [...]

CD changer (accessories) A digital CD changer can be connected to the navigation radio. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A Do not load navigation CDs into the CD changer. A Do not insert DVDs or shaped CDs in the CD changer magazine. If you ignore these recommendations, y[...]

The “CD CHANGER” menu In CD changer mode: ☞ Press the MENU button. : The “ CD CHANGER ” menu is displayed. The following functions are available: Manual Search ☞ Activate this function in order to perform a manual search using the right rotary control. ☞ Turn the right rotary control one notch to the right or left in order to start th[...]

The “INITIALISA TION” menu ☞ Select “ Initialisation ” in one of the following menus: “ RADIO ”, “ INFORMATION ”, “ CD ” or “ CD CHANGER ”. : The “ INITIALISATION ” menu is displayed. The “ INITIALISATION ” menu allows you to adjust the navigation radio to your needs. The following functions are available: T elepho[...]

On Off logic ☞ Activate this function to limit the operation of the device to one hour after the ignition key is removed. Display Setting the display contrast and the display brightness. ☞ Set the contrast and brightness for the display between 0 and 31 as required. Loudspeaker T est ☞ Activate this function to control the loudspeaker connect[...]

C-IQ - Y our key to map, traf fic and travel information With your navigation radio you get several CDs containing all the available map data of Europe, plus digital travel guide products and TMC data (for dynamic navigation). The information or products on the CDs are encrypted and, if required and after expiry of an activation period, can be acti[...]

Registering the navigation system In order to activate other C-IQ products, you must register your navigation system with C-IQ Service. This also ensures that you will receive updated CDs on a regular basis, and will therefore always be using the latest maps (does not apply to unlimited activation). Registering the system also provides you with add[...]

My C-IQ You have the choice of obtaining information about your activation status at any time. ☞ Select “ My C-IQ ” in the “ C-IQ ” menu. ☞ Select “ Active products ” if you wish to find out more about the products you have activated. ☞ Select “ Starting soon ” if you wish to view details of products you have received which wi[...]

Preview Together with your map and travel information software you will also receive the opportunity to inspect different products free of charge before ordering them. You can have the system display the status of this preview: ☞ Select “ Preview ” in the “ C-IQ ” menu. : You will see the status of your preview options. It contains the nu[...]

Info Points function Visual and audible indication of important points along your route. Different providers of travel and traffic information have optimised these specifically for navigation systems. This includes information about fixed speed camera installations or other safety relevant information (e.g. schools, kindergartens, etc.) and places [...]

Main control A map CD must be inserted into the CD player for some of the functions in navigation mode. If the unit is not yet in navigation mode: ☞ Press the NAV button. : The navigation main control is displayed. The following items are available in the main control: Destination input Opens the “ Destination input ” menu. Here, a destinatio[...]

Destination input Destinations may be entered in several ways: – Entering city, road and house number or junction by means of the “typewriter.” See the following page. – Loading an address stored in the personal address book. ➽ page 65. – Recall one of the last 20 addresses used for guidance. – Selecting a specific destination (e. g. [...]

1 st step: City or postal code ☞ Select “ New address ” in the destination input menu. : The display automatically shows “ City: ” and the typewriter window, the name of the last destination city is already displayed. ☞ If you want to enter a destination address in the city shown, simply select “ – ” (only available if map CD is i[...]

2 nd step: Road : Once the city has been entered the input wizard automatically jumps to the “ Road: ” input menu. ☞ Enter the name of the road using the “typewriter” or select a name from the list using ¯ . 3 rd step: House number or junction If house numbers are available for a selected road, they can be entered with a separate input m[...]

Special destinations (POIs) You may also input the destination address by selecting special facilities (POI = Points of Interest) stored in the database. These include e.g.: – airports, – hotels, – petrol station, – car repair garages – car parks, etc. Depending upon the information already entered in the destination input screen, a list [...]

Special facilities in the vicinity of the current position You may also set a destination address by selecting a special facility in the vicinity of the current vehicle location. ☞ Select “ Info on car pos. ” in the destination input menu. : A list of categories of special facilities is shown. ☞ Select the required category. : A list of fac[...]

Via point input If you wish to visit other locations en route to the entered destination address, these can be stored as via points. The navigation system then plans the route to include the via points in the given sequence before the destination address is reached. When you reach a via point, you will hear “You have arrived.” The navigation sy[...]

Delete via points not reached Via point which you have not reached or which are no longer desirable to you must be deleted from the via point list so that the navigation system may plan the route to the next via point or to the final destination. If a not reached via point is not deleted, the system will continue to try and guide you to this via po[...]

Guidance Guidance screen The guidance screen appears as soon as you activate the guidance. The guidance screen displays the following information: 1 Road direction arrow: The arrow indicates the course of the road. 2 Simplified presentation of the next turn-off prompt (early warning). 3 Status field. Display of the following possible information: -[...]

9 Stationary traffic display: As soon as any traffic obstructions reported by TMC pertain to the planned route, a brief message appears, indicating the distance to the nearest obstruction and its type. This function can be activated/deactivated from the menu “ Settings -> Guidance screen ”. ➽ page 69. 0 As you approach a crossroads or junc[...]

Audible messages During guidance, the navigation radio will provide acoustic routing information in addition to the symbols on the guidance screen. Commonly, the directive to turn into another road consists of two voice messages: an early warning e.g. “Right turn ahead” and the instruction to turn e.g. “Turn right in 200 metres” “T urn no[...]

Road direction arr ow On longer route segments without junctions or crossroads, an arrow is displayed indicating the course of the road over the next 100 m or so. In addition, a reduced diagram of the next turn-off prompt appears on the left, above the route direction arrow. Thus, the driver is always warned in advance of the next change of directi[...]

Route selection During guidance, you may also modify the route criterion and activate or deactivate dynamic route planning. The system will then plan a new route taking into account the new setting of the current position of your car. ☞ In the guidance screen, select the symbol for route selection (on the basis of the setting in the destination i[...]

Information during guidance During guidance, you can call up several information screens: ☞ Move the cursor to the ™ symbol and confirm. ☞ The list of information menus appears. The following information menus are available: Route list This option is available as soon as a route has been planned. The list of segments of the planned route appe[...]

Displaying/deleting via points If via points have been entered for the current destination, the “ Via points ” option will be active. The number of via points still to be reached also appears. ☞ Select the required via point from the list in order to view details or delete it. Destination Display of current destination address with Name (if e[...]

T raffic information Use the “Traffic info” option in the main control to obtain information about traffic conditions in three different categories: – At the car position – At the destination – On the route ✎ To access traffic information, the radio must be tuned to an RDS TMC station. ✎ Please note that the selected RDS-TMC station m[...]

☞ By turning the right rotary control, you can access two further screens containing details about the selected traffic obstruction. : The second details screen indicates the section in which the traffic obstruction is located and the third, the information about the obstruction provided by the TMC provider. : If there are traffic obstructions on[...]

Dynamic guidance with TMC With RDS TMC (Traffic Message Channel), the current traffic situation is taken into account when planning the route to your destination. You will be informed, for example, of accidents, congestion or construction sites as soon as such a traffic situation occurs. If you approach the traffic obstruction, the automatic detour[...]

Bypassing a traffic obstruction locally When you approach the last exit before reaching a traffic obstruction, the navigation system will alert you and offer you the option of planning a detour route. As soon as a traffic obstruction is detected on your route and the detour option is displayed on the guidance screen: ☞ Confirm the detour option i[...]

Dynamic route planning Unlike dynamic guidance, which provides information about traffic conditions on your route and on request about local traffic conditions, dynamic route planning takes into account the whole of the current traffic situation in a configurable area (horizon) in the vicinity of the current position of the car. If a traffic obstru[...]

Alternative route During guidance, you can cause the navigation system to plan an alternative route. Use this function if, for example, you want to avoid stationary traffic not reported via TMC or if you wish to plan an alternative route. The alternative route will be calculated for a selectable distance from the current position of the car. ✎ Th[...]

Address manager The navigation radio offers the opportunity of storing at least 30 destination addresses in a personal address book. In the address book, you can store your destinations separately under the categories “Private” and “Business”. The “Home” and “Work” shortcuts, which can be programmed with your home address and busine[...]

Store curr ent loc. Would you like to store a favourite restaurant in the destination memory? You can store the current position of your car as follows: ☞ Select “ Store current loc. ” in the address manager. ☞ Select which address books the address should be stored in (private, business, home or work). : The name input menu appears. ☞ En[...]

Emergency menu ☞ In the main control, select “ Emergency ”. : The “ Emergency ” menu is displayed. The following options are available in the “ Emergency ” menu: GPS position Display of the current geographic vehicle location as calculated by the Global Positioning System. Longitude, altitude and elevation above sea level (provided ad[...]

System settings To customise the navigation functions to your own needs, you can change several settings. ☞ In the main control, select “ Settings ”. : The “ System settings ” menu is displayed. The following information screens are available: Speed In the “ Speed ” menu, you can configure the following settings: ■ Speed correction [...]

■ Limit (xx/h) This enables you to specify a value manually so that a speed warning will be given if you exceed this speed (useful if using winter tyres, for example). ☞ Select “ Limit (xx/h) ” and set the desired limit for the fixed speed warning. ☞ Select “ OFF ,” if you wish to deactivate the speed warning. ■ Aud. W arning ☞ Se[...]

■ Delay Use this value to indicate the anticipated delay time due to a traffic obstruction at or above which the navigation system should suggest that a new route be planned. Select a value between 5 and 60 minutes. ✎ The anticipated delay is calculated on the basis of the data received from the TMC station and may deviate from the actual situa[...]

Service For diagnosing hardware and software problems (code-protected). The option “ Service ” is exclusively reserved for service work on the navigation radio performed by an authorised service company. System information The “ System information ” menu displays information about the software and hardware version (for service purposes). In[...]

In rare instances, your navigation radio may not function the way you expect it to. Before calling the service department, please read the operating instructions thoroughly and go through the following check list; it may be possible to quickly remedy an apparent malfunction. Symptoms Possible cause / remedy General Navigation radio not functioning.[...]

Symptoms Possible cause / remedy Navigation Display shows “Please insert map CD”. The map CD is required for some functions in navigation mode. • Insert the C-IQ map CD into the radio CD drive with the label facing upwards. The number of satellites in the “GPS/Compass” information menu is 0. • Ensure that the GPS antenna is not being ob[...]

Tips for convenient operation ■ Cross-border guidance Owing to the high data volume, the European navigation data is stored on several CD ROMs (map CDs). In order to nevertheless achieve cross-border guidance, the most important European cities and roads (Major Roads Europe) are additionally stored on the map CDs at present. In order to enable cr[...]

75 MENU OVERVIEW SOUND SOUND SETTINGS RDS MEMO AUTOS TORE ST A TION LIST PRESET LIST MANUAL TUNING PT Y SEARCH RADIO SETUP INITIALIZA TION TMC SC AN TA S C A N NEWS ANN. LEVEL GUID. LEVEL Compression Comp. rate CD SETUP INITIALIZA TION MANUAL SEARCH REPEA T TRACK RANDOM SCAN LOUDNESS SOUND ST YLE SDVC SOUND SETUP INITIALIZA TION Bass T reble Balanc[...]

76 MENU OVERVIEW NAV DESTINA TION INPUT VIA POINT INPUT GUIDANCE TRAFFIC INFO ADDRESS MANAGER C-IQ T ravel info Long-/Latitude Info on car pos. Last destin. Load address New address Country City Road Number / Junction Route selection EMERGENCY STOP GUIDANCE SETTINGS GAMES Speed Route list Event on the route Destination Car position GPS / Compass T [...]

A2C53105374 043653105374 08/2004 ri Car Multimedia Systems. VDO Dayton. The Car Brand.[...]