Uniden G403 инструкция обслуживания

Lullaboo G403 Baby Monitor User ’ s Guide[...]

CUSTOMER CARE At Uniden®, we care about you! If you need assistance, please do NOT return this product to your place of purchase. Our customer care specialists are available to serve you. Quickly find answers to your questions by: 1. Reading your owner’s manual, included with this product. 2. Visiting our customer support website at www.uniden.c[...]

CONTENTS Customer Care ............................................................................................. 2 INTRODUCTION ..........................................................................4 FEATURES ...................................................................................................... 4 GETTING STARTED ............[...]

4 INTRODUCTION FEATURES • 2.4GHz Digital FHSS • 4.3” high-resolution touchscreen LCD • Easy to use graphic interface • Secure, interference-free video • Up to 500’ wireless transmission • Video and audio transmission • Quad, Scan, and Full screen view • Supports up to 4 cameras • Infrared LEDs for night vision (up to 20’ •[...]

5 GETTING STARTED USING THIS MANUAL This manual is set up in six main sections: • Getting Started. This section describes your hardware and how to physically set it up. • Uniden Guardian™ Lullaboo Firmware Operations Overview. This section lists basic operations in an abbreviated format. It references screen details in the third section. • [...]

6 GETTING TO KNOW THE MONITOR AND CAMERA Receiver Pow er Dock Data Cable Connection AC P ower Connection Pow er On/O SD slot AC P ower Connection Monitor (back/side) Cradle Pull-Out Stand Reset Antenna Light Sensor IR LEDs Charge Link Po wer LEDs Microphone Antenna Po wer Link DC Jack Camera Lens[...]

7 WHAT THE LIGHTS MEAN    Power On (Blue) The camera is on. Off The camera is off. Link Flashing The camera is in pairing mode. On (Amber) The camera is connected to the monitor. Off The camera is in standby. Charge On (Green) The battery is charging. Off The battery has charged. SETTIN[...]

8 MOUNT THE CAMERA STAND GENERAL GUIDELINES The camera included with your monitor is NOT weatherproof; it is an indoor camera. As dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth. PLACEMENT CONSIDERATIONS Consider [...]

9 ATTACH THE CAMERA Place the stand swivel mount over the camera’s stand connection and slide the mount to the left until it clicks in place. CONNECT TO POWER 1. Insert the AC adapter power plug into the camera’s DC adapter input jack. Plug the other end into a 120 volt AC (standard indoor) power outlet. 2. Press POWER and make sure the blue po[...]

10 • Language (default language is English; “Changing the Language” on page 36) RECORDING SETTINGS • Motion Detection (“Motion Detection” on page 22) • Schedule Recordings (“Schedule Record” on page 25)[...]

11 UNIDEN GUARDIAN LULLABOO FIRMWARE OPERATION OVERVIEW Your baby monitor uses Uniden Guardian Lullaboo firmware to operate a series of screens that lets you choose groups of operations. For example, when you tap on the camera icon in the Pop Up menus, you can set how you want the main viewing screen - called the Live screen - to display images fro[...]

12 WHAT THE ICONS MEAN    Select how you want the Live screen to display camera input: • Scan between cameras (5 seconds) • Quad view (all paired cameras display) • Full view (1 camera displays on full screen)  Adjust the volume level. [...]

13   Appears in Live view. Indicates remote viewing is in progress. Appears in Live view. Indicates system is not connected to the internet. Appears in Live view. Indicates the intranet connection is established.  Displays the camera number and signal strength th[...]

14 CHANGING HOW THE LIVE SCREEN DISPLAYS The Live screen displays in 2 views - Quad view or Full view. Quad view divides the screen’s image area into 4 quadrants and displays camera video in each quadrant. If less than 4 cameras are on, only those cameras’ video will display on the Live screen. Full view displays a single camera’s video on th[...]

15 USING YOUR SYSTEM RECORDING LIVE VIDEO 1. On the Live screen, tap for the camera to begin recording. 2. Tap it again to stop recording. You can record from all cameras at the same time. PLAYING BACK RECORDED VIDEO F rom the pop-up menus, tap the follo wing icons as they appear on the screens: The Recor d List screen display s.   1. Tap on [...]

16 ADDING NEW CAMERAS Your monitor supports a total of four active cameras at a time. When you add a camera, you have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can communicate). SOME THINGS TO KNOW ABOUT PAIRING CAMERAS • If a camera is already assigned to the selected channel, the monitor overwri[...]

17 TROUBLESHOOTING CAMERA PAIRING Consult the following table for camera pairing troubleshooting suggestions:   the camera’s signal status icon shows no bars • making sure the camera is plugged in and the blue LED is on. • making sure that both the camera’s and the monitor’s antennas are extended. ?[...]

18 GUARDIAN LULLABOO SCREEN DESCRIPTION OVERVIEW This section describes the Guardian Lullaboo firmware screens in detail. It provides a path to the screen being viewed. GUARDIAN LULLABOO SETTINGS SCREEN F rom the pop-up menu, tap the following ic ons as they appear on the screens: This screen should displa y :   The Guardian Lullaboo Settings[...]

19    Network Setup Internet Setup Select the type of internet connection to be used. (DHCP is most common.) Security Code Set a security code for remote access. Network Information Displays information about your network and the monitor’s unique[...]

20 CAMERA SETUP SCREEN PAIRING Your camera is paired to the monitor at the factory to channel 1. When you add a new camera to your system, you have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can communicate). SOME THINGS TO KNOW ABOUT PAIRING CAMERAS: • If a camera is already assigned to the select[...]

21 CAMERA ON When you add a camera to your system, pair the camera with the monitor and the system will automatically turn it on. An X indicates a camera that is turned off; a check mark indicates the camera is turned on. F rom the pop-up menu, tap the following ic ons as they appear on the screens: This screen should displa y :     1. [...]

22 BRIGHTNESS F rom the pop-up menu, tap the following ic ons as they appear on the screens: This screen should displa y :     Tap the camera whose brightness level you want to change. The default brightness is 0, and the range is from -2 through 2. RECORDER SETUP SCREEN Use the Recorder Setup screen to select between Motion Detection, [...]

23 2. Tap to return to the main Motion Detection screen. The Motion Detection default setting is to Low. The system records for 2 minutes when motion is detected. EMAIL ALERT The Guardian Lullaboo firmware can notify you when cameras detect motion by sending you an e-mail alert. The e-mail alert contains information such as the time that motion was[...]

24 1. Tap Enable to activate Email Alert or Disable to deactivate it. 2. Tap on the SMTP Server field. A keyboard screen displays. 3. Enter your outgoing e-mail SMTP server (example: johndoe@gmail.com). You can switch the keyboard from alphabetical characters to numbers/symbols and back again by tapping the field to the left of the space bar. Tap R[...]

25  SMTP Server Smtp.gmail.com Enter this. SMTP Port 465 Enter this. Username XXXX@gmail.com Enter your gmail address in full, including @gmail.com. Password XXXXXXXXXX Enter the password for this gmail account. Email to XXXX@gmail.com Enter the email address where you want the alerts sent. SCHEDULE RECORD You can schedul[...]

26 4. Tap on the blank Date box. The Recorder Setup calendar screen displays. 5. Tap on the date you want the recording. The previous screen displays. 6. Set up the recording and then tap SAVE . You can select another recording session to schedule, return the previous screen, or return to the Live screen. Scheduled recordings are broken up into 15 [...]

27 INTERNET SETUP 1. Tap Internet Setup icon to display the Internet Setup screen. 2. Tap on your selection and fill in the fields requested. Tap OK .   Static IP • IP Address • Subnet Mask • Default Gateway • DNS Server DHCP None 3. Tap OK at the system reboot prompt. The Network Setup screen di[...]

28 2. If you have not entered a security code, you can enter it here. If you have previously entered a security code, your current security code displays. The default security code is set to 123456. We recommend that you change this code to something you will remember. You will need the code to access your video from a remote device such as a smart[...]

29 NETWORK INFORMATION SCREEN 1. Tap the Network Information icon to display the Network Information screen. 2. Tap the arrow to return to the previous screen. The DID is a unique code specific to your monitor and is required (along with the security code) to gain remote access to your camera over the internet. The information in the DHCP setting i[...]

30 PERIOD SCREEN This selection allows you to select the length of time the alarm will sound for the alarm clock. 1. Tap Period. The Change Siren Duration screen displays. 2. Tap the duration you want the siren to last (2, 10, or 30 seconds) or tap None to turn sirens off. 3. Tap to return to the previous screen. MELODY This selection allows you to[...]

31 2. A check mark appears on the melody you tap and the monitor briefly plays a sample of the selected melody. 3. Tap the BACK arrow to return to the previous screen. SYSTEM SETUP SCREEN POWER SAVING When you turn on Power Saving mode, the monitor goes into sleep mode (LCD turns off) after it is idle for 2 minutes. Press the POWER button once to r[...]

32 2. A check mark appears on your selection. 3. Tap to return to the previous screen. SCREEN AUTO LOCK When you turn on Auto Lock mode, the monitor will automatically enter screen lock mode after it has been idle for 2 minutes. Auto Lock disables the touchscreen and removes the icons from the display. When the auto-lock feature has been enabled an[...]

33 TIME The Time screen lets you set up clock alarms, set the system time, and set a timer. F rom the pop-up menu, tap the following ic ons as they appear on the screens: The follo wing screen display s:     CLOCK ALARM This feature operates as an independent alarm clock. It does not affect the operation of live video or recording video[...]

34 4. Tap on the minute block. The UP/DOWN arrows move to the minute block. Set the minute. 5. Tap on AM/PM to toggle between the two. 6. Tap SAVE when you are finished. TIME SETTING This screen contains fields to set the Month, Day, Year, Hour, Minute, and AM/PM. 1. Tap to display the Time Setting screen. 2. Tap on each field to set it. The UP/DOW[...]

35 TIMER This feature operates as an independent timer. It does not affect the operation of live video or recording video. 1. Tap to display the Timer screen. 2. Tap on each field to set it. The UP/DOWN arrows shift to that field. Use UP/DOWN to set the field. 3. Tap START to begin the timer. When the timer reaches 00:00 , an alarm beeps until you [...]

36 1. Tap on START ; a warning statement displays. 2. Tap OK to proceed to format storage or tap CANCEL to discontinue and return to the previous screen. 3. The system indicates success or failure. SYSTEM UPGRADE To upgrade the Uniden Guardian Lullaboo firmware, you will need to download the file from the Uniden website (www.uniden.com) to your com[...]

37 F rom the pop up menus , tap the following ic ons as they appear on the screens: This screen should displa y :     1. Select a language to change to that language. The Restore Default Settings screen displays. 2. Tap OK to continue with the language reset. The system will reboot in about 5 seconds. If you do not want to reset the lan[...]

38 REMOTE ACCESS OVERVIEW Uniden’s Lullaboo baby monitor lets you view live video from your Windows® PC, an iPhone®, iPad®, or Android TM smartphone or tablet. Free apps are available through the iTunes® App Store or the Android Market. This system uses P2P remote access technology and does not require configuring your router, port forwarding[...]

39 2. Connect the other end into your primary router (typically, the router from your service provider). 3. Place cradle maximum distance away from your router. 4. Insert the monitor into the cradle. A screen asks if you want to connect to the internet or to only charge the monitor. 5. Tap Connect . The Internet Connection Status Indicator appears [...]

40 1. From your Android TM smart phone or tablet device, search the Android Market for Uniden Guardian . 2. Download and install this app to your device. 3. Launch the app; select Add to add your system information to the app. 4. Enter a name for your system in the System Name field. 5. Enter the same DID code from the back of your Lullaboo monitor[...]

41 APP OPERATION When you open the APP on your Android phone, the image displayed on the main screen is the last camera image, captured automatically, from your previously established session. Main screen T ap to add an additional Guardian system. T ap to enter System Setup page. T ap to refresh the system. T ap to enter the APP Information page. T[...]

42 IPHONE® In a similar fashion to the Android smart phone, you can use the Apple® iPhone® smart phone or iPad® tablet with your Lullaboo system to remotely connect to and view camera videos. Follow these steps to download the Uniden Guardian iPhone® App and set it up to work with your Lullaboo. DOWNLOAD 1. From your iPhone® or iPad®, go to [...]

43 Main screen T ap to add an additional Guardian system. T ap to enter System Setup page. T ap to refresh the system. T ap to enter the APP Information page. The screen displays the APP version number and the API version number . T ap OK to exit. If you have multiple systems, scroll down and tap on the system image you want to view . TO VIEW VIDEO[...]

44 SOLVING PROBLEMS If you have any trouble with your system, try these simple steps. If you are still having a problem with your camera, check the manual that came with your camera. If you still have a question, call our Customer Care Line; see “Customer Care” on page 2.   The motion sensor won’t respond to movement. [...]

45   The camera won’t pair with the monitor • Making sure the camera is plugged in and the blue (Power) LED is on and the yellow (Pairing) LED is flashing. • Pressing and releasing the pairing button quickly. Do not press and hold the pairing button. When I power up my monitor and camera for the first time, it seems to[...]

46 ADDITIONAL INFORMATION PRODUCT SPECIFICATIONS  RF Frequency 2.4 GHz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Selectable camera channel 4 Data rate 2 Mbps Transmitting range 500 feet (152 meters) in an open area[...]

47    Operating voltage 5 V DC @ 1 Amp Power consumption 650 mA max Low light solution 12 IR LEDs, 1 Low light sensor Low light sensitivity 1-8 lux Picture sensor OV7725 1/4’ Color CMOS Lens F3.6mm H:53 V:40 Lithium-Polymer Battery Warning • Th[...]

48 • If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for recycling. FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and ([...]

49 IC Compliance Information Radio Equipment Notice The term “IC:” before the radio certication number only signies that Industry Canada technical specications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfere[...]

50 or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRE[...]