Tenda D1201 инструкция обслуживания

W ireless AC1200 ADSL2+ Dual Band Modem Router i[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router ii Cop yright Statement is the regist ered trademark of Shenzhen Tenda Tec hnology Co., L td. All the products a nd product names menti oned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integrati on, including its accessories and soft[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router iii Contents Chapter 1 Get t o Know Y our Router ..................................................................................................................................... 1 1. What it does ......................................................................................................[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router iv 5. Managem ent .......................................................................................................................................................... 149 5.1 Settings .................................................................................................................[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 Ch a pter 1 Get to Know Y our R outer 1. W ha t it does The W ireless AC1200 ADSL2+ Dual Band Modem Route r provides you w ith an easy and secure way to set up a wireless home network wit h fast access to the Internet over a high -speed digital subscriber line (DSL). Complete with a built-in ADSL mod[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 2 S tr ong driving capabil ity up to 6.5Km transmission distance High speed ADSL speed up to 24Mbps downstream 1Mbps upstream Built-in fir ew a ll prevents ha cker attacks Channel auto- select fo r optim um performance FDM tech nology enables telephoning, fa xing and surfing activities to procee d simu[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 3 Cha pter 2 Har d war e Insta ll Y ou can also set up y our new router instead of using the Install Guide that comes i n the box. This chapter walks you through the h ardware install. 1. LED Indicator s , Buttons and In terfaces Fr o nt Panel LED S tatus Description PWR Solid Power is suppl ied to the[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 4 Back P anel Button & Inter face Description DSL For connecti ng the router to t he Internet via a phone c able provided by your ISP . 1/W AN LAN port or W AN port. When you access the Internet via the DSL, this port works as a LAN port which can be used to connect to a PC, a switch, or a router; [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 5 RST/W P S Press it for 1- 3 seconds to enabl e WPS-PBC f eature; Press it for 8 se conds to restore al l configurations to fact ory default s. DC Used to conne ct to the power adapt er , which is incl uded in the package. ON/OFF Power swit ch to turn the rout er on or off. 2. Install the devi ce  [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 6 ADSL Mode No need to us e a telephone: Directly connect the DSL line to the D SL port of your r outer . Use the splitt er as a medium : 1) Connect t he DSL line from the Internet side t o the LINE port of the spli tter; 2) Connect t he telephone with a pho ne cable to the PHONE port of the spl itter;[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 7 Cha pter 3 Qu ic k In ter net Setup This chapter inst ructs you t o quickly set up y our Internet connection. 1. Log in to W eb Man age r Pr eparation for logging in to web manager:  Method 1: Usin g Resource CD  I nsert the included resource CD into your computer’s driver and the CD automati[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 8 Login:  Enter admin in both the Login Username and Password fields if you access the router for the first time and then click Login to enter the home page. Ti p If you change the login username and passw ord and for get them, press the RST/WPS button on the device for at least 8 seconds to reset t[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 9 2. Inter net Setup 2.1 ADSL Mode  Connection Mode: Select ADSL mode.  Country: Sel ect your country .  ISP: Select y our ISP .  VPI/VCI: This two fiel ds will be populated aut omatically if you select a correct count ry and ISP .  Connection T ype: Select your Connection T y pe, and fi[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 10 DNS server . This information should have been provided to y ou b y your ISP . If a secondary DNS server address i s available, enter it also. IPoA St atic IP Enter the assigned I P a ddress, subnet m ask, and the IP address of y our ISP’ s prim ar y DNS server . This information should have been [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 11 Connection T ype ISP Information IPoE Dynam ic IP No entries are needed. St atic IP Enter the Int ernet info (IP address, subnet mask, gatew ay and DNS server address) provided by your ISP. PPPoE Enter the usernam e and passw ord provided by your ISP. Bridge When Bridge mode is enabled, the router w[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 12 2.3 T est Internet C onnectivity If Connection S tatus shows Con nected shown as below , you access the I nternet now . T ry to launch a web browser and enter www .tendacn.com . If the webpage displays properly , y ou ar e suc cessfully connected to th e Internet.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 13 Cha pter 4 Adv anced Se ttings If you pref er configuring y o ur modem router for unique sit uations, consult this chapt er to know advanced features. Click on the home page t o enter the screen b elow . 1. De vice Info 1.1 Summ ary Here y ou can view syst e m inform ation and current status of your[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 14 1.2 W AN Here you can view the W AN Informati on including Interface, Description, T ype, IGMP , NA T , Fi rewall, S tatus, IPv4 Address as seen i n the screenshot . 1.3 S tatistics Here y ou can view the packet s received and transm itted on LAN and W AN ports. S tatistics -- LAN: Displays t he pac[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 15 S tatistics -- W AN: Display s the packets received and transm itted on the W A N (eth0 .1) port as seen in the screenshot below . S tatistics -xDSL: Displays the packets received and t ransmitted on the D SL port.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 16 1.4 Route Here y ou can view the route t able as seen in the scree nshot: 1.5 ARP Here you can view the IP and MAC addresse s of the PC s that attach to the device either via a wired or wireles s connection as s een in the screenshot . 1.6 DHCP Here you can view the DHCP leases, including IP and MAC[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 17 2. Advanced Setup 2.1 Layer2 Interfa ce Click Advanced Setup > La yer2 Interface to enter the L ayer2 I nterface screen. This modem router provi des two Lay er2 Interfaces: - A T M Inter face for ADSL broadband Inter net service. (By default, system appli es the A TM Int erface (ADSL uplink).) - [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 18  Go to 2.2.1 F or A TM Int erface to configure the W A N service for Int ernet access. Ti p If you are uns ure about the VPI/VCI param eters, see Appendix 4 VPI/VCI List , or ask your I SP to provi de it.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 19 2.1.2 T o set up the ETH in terface  Select ETH Int erface and click Add .  Select eth0/eth0 in the box to function as a W AN po rt. Only one LAN port can be configured as the W AN port at a time. Cli ck A pply/Save t o take the settings i nto effect .  Go to 2.2.2 F or ETH Interface t o co[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 20 2.2.1 For A TM Interface Follow ing 11 m odes are for you t o choose according to y our actual Internet service. EoA PPPoE 1) IPv4 Only 2) IPv4&I P v6(Dual S tack) 3) IPv6 Only IPoE 4) IPv4 Only 5) IPv4&I P v6(Dual S tack) 6) IPv6 Only 7) Bridging PPPoA PPPoA 8) IPv4 Only 9) IPv4&I P v6([...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 21  Finish PPP User name and Password an d other settings on t he figure below . Click Next . PPP Username/ Password: Enter your PPP usernam e and password. If you cannot locate this inform ation, ask your ISP to provi de it. PPPoE Ser vice Name: Prov ided by y our ISP . Only enter it if inst ructed[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 22 your I SP or select AUTO . MAC Clone: When y ou cannot access the Internet aft er f inishing other settings here exce pt this option, consider whether it’ s the matter of the MAC address of y our comput er . Clicking Clone MAC button copies the MAC addres s of your com puter to the m ode m route r[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 23  T o configure the W AN DNS address, cli ck the Select DNS Server Interface fr om available W AN interfaces option, or select the Use the following S tatic DNS IP address option and enter the static DNS server IP addresse s provided by your I SP . At last, click Ne xt .  Click Apply/Sav e to s[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 24  Here y ou can view your conf igurations. When t he PPPoE connect ion is successful, y ou can access the I nternet.  Steps 1~6 above for P PPoE and IPv4 Onl y users -------------------------- --------------------- ------------------------ --------------------- --------------------- ---------- [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 25  Select PPP over Ethernet (PPPoE) . Edit the Enter Service Description field which is optional. Suggest y o u keep the default. Sel ect a network prot ocol you need: IPv4&I Pv6 (Dual S tack ) . Click Next .  Configure PPP Username and Password and other settings on the figure below . Each [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 26 If ISP provides you with the static IPv4 and IPv6 address, configure the static IP addresses by checking Use S tatic IPv4 Address and Use S tatic IPv 6 Addr ess and enter the st atic IPv4 and I P v6 address.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 27  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address. Then click Next .  T o configure the W AN DNS address, fini sh both the IPv4 setti ng and IPv6 setti ng. Click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 28  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the PPPoE connect ion is successful , you can access the I nternet.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 29  Steps 1~6 above for P PPoE and IPv4&IP v6 (Dual S tack) users ------------- -------------------- ------------------- --------------------- ----------------- ------ 3) PPPoE IPv6 On ly Users If you configure the A TM Interface (ADSL uplink) and select EoA as the DSL link type, then you can st[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 30  Configure PPP Usernam e and Password and other settings on the figure below . Each field with its indication is menti oned above in PPPoE and IPv4 users section. If ISP provides y ou no static I P v6 address, y ou just keep the default settings DHC P mo de. Check Launc h Dhcp6c for Prefix Delega[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 31 If ISP provides you with the static IPv6 address, configure a static I P address by checking Use S tatic IPv6 Address and enter the stat ic IPv6 address.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 32  T o conf igure the D efault Gateway inter face when using IPv6, select the interface that you want to configure with the W AN gateway address in Select ed W AN I nterface box. Then click Next .  T o configure the W AN DNS address, check the Obtai n IPv6 DNS info from a W AN interface opt ion,[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 33  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the PPPoE connect ion is successful , you can access the I nternet.  Steps 1~6 above for P PPoE and IPv6 Only us ers -------------------------- --------------------- ---[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 34  Select the A TM inter face you added just now from the pull- down menu in the fi gure below . Click Next .  Select IP over Ethernet . Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network prot ocol: IPv4 Only . Cl ick Next .  Finish W AN IP Se[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 35  Finish Net w ork Address T ranslati on Settings . Suggest keepi ng the default set tings. Click Next .  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gatew a y address in A vailable R outed W AN Interfaces box and move it into Selec[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 36  T o fini sh DNS Server Configurati on, click the Select DNS Server Interface fr om available W A N interfaces option, or select the Use the following S tatic DNS IP address option and enter the static DNS server IP addresse s provided by your I SP . At last, click Ne xt .  Click Apply/Sav e t[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 37  Here y ou can view your conf igurations. When the IPoE c onnection is successful, y ou can access the I nternet.  Steps 1~7 above for IP oE and IPv4 Only user s --- ---------- ------------------------ --------------------- ------------------------ ------------------- --------------------- ---[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 38  Select IP over Ethernet . Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network prot ocol you need: IPv4&IPv6 (Dual S tack) . Click Next .  T o finish W AN IP Settings, select Obtain an IP/IPv6 addr ess automaticall y , check Dhcpv6 Pre f ix [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 39  Finish Netw ork Address T ranslation Settings. Su ggest keeping the default settings. Cl ick Next .  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address. Then click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 40  T o configure the W AN D NS address, finish both th e IPv4 setting and IPv6 setting. Click Next . Note If Obtai n an IP addres s autom atically is chosen, DHC P wi ll be enabled for PV C in IPoE mode.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 41  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the IPoE c onnection is successful, y ou can access the I nternet.  Steps 1~7 above for IP oE and IPv4&IPv6 ( Dual S tack ) Users -------------------- --------------[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 42  Select the I PoA interface you added just now from the pull- down menu in the figure bel ow . Click Next .  Select IP over Ethernet (IPoE ) . Edit th e Enter Service Description field which is optional. Suggest you keep the default. Select a network prot ocol you need: IPv6 O nly . Click Next[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 43  Finish W AN IP Settings on the fi gure below . Click Next .  Finish Net work Address T ranslation Setti ngs. Suggest keeping the default setti ngs. Click Next .  T o conf igure the D efault Gateway inter face when using IPv6, select the interface that you want to configure with the W AN ga[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 44  T o configure the W AN DNS address, check the Obtai n IPv6 DNS info from a W AN interface opt ion, or select the Use the following St atic IPv6 DNS address option to enter the static DN S server IPv6 addresses provided b y your ISP . At last, cli ck Next . [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 45 Click Apply/Sav e to save your sett ings if everythi ng is correctly se t.  Here y ou can view your conf igurations. When the IPoE c onnection is successful, y ou can access the I nternet.  Steps 1~7 above for IP oE and IPv6 Only Users -------------------- ------------------ ------------------[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 46  Select Bridging . Edit the Enter Service Description field which is optional. Suggest you keep the default. Cl ick Next.  Click Apply/Sav e to save y our settings if every thing is correctly set.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 47  Here y ou can view your conf igurations. When the Bridge connect ion is successful , you can access the I nternet.  Steps 1~3 above for Bri dging Users -------------------------- ------------------ --------------------- ------------------------ --------------------- ------------------------ -[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 48  Edit the Enter Service Description field which is optional . Suggest you keep the default. Select a network protocol you need: IPv4 Only . Click Next.  Set PPP Usernam e and Password on the f igure below . Suggest keeping other opt ions default. Click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 49  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address in A vailable R outed W AN Interfaces box and move it into Selected Default Gateway Interfaces box. The default sett ing is recomm ended. Then cli ck Next .  T o configur[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 50  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the PPPoA connection is succ essful, y ou can access the I nternet.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 51  Steps 1~6 above for P PPoA and IP v4 Only Users -------------------------------- --------------------- ------------------------ --------------------- ------------------- ----- 9) PPPoA IPv4&IPv6 (Dual S tack) Users After you configure the A TM Interface (ADSL uplink) and select PP PoA as the[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 52  Set PPP Usernam e and Password on the f igure below . Suggest keeping other opt ions default. Click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 53  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address. Then click Next .  T o configure the W AN D NS address, finish both th e IPv4 setting and IPv6 setting. Click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 54  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the PPPoA connection is succ essful, y ou can access the I nternet.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 55  Steps 1~6 above for P PPoA and IP v4&IPv6 (Dual S tack) Users ------------------- ------------------ ------------------- --------------------- ------------------ 10) PPPoA IPv6 Only Users After you configure the A TM Interface (ADSL uplink) and select PP PoA as the DSL l ink type, you can st[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 56  Set PPP Usernam e and Password on the f igure below . Suggest keeping other opt ions default. Click Next .  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address. Then click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 57  T o configure the W AN D NS address, finish both th e IPv4 setting and IPv6 setting. Click Next . [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 58 Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When t he PPPoA connection is succ essful, you can access th e Internet.  Steps 1~6 above for P PPoA and IP v6 Only Users -------------------------------- --------------------- -[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 59  Edit the Enter Service D escription . This field is optional. Sug gest to keep the def ault name. Cli ck Next.  Set the W AN IP address a nd subnet mask prov ided by your I SP .  Finish Network address translati on settings. Suggest keeping the default sett ings if you’re not sure how to[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 60  Finish the default settings on the following screen. T o configure one interface with the default gateway , select and move the interface from A vailable Routed W AN Inter faces into Selected Defa ult Gateway Inte rfaces . T o cancel the interface as the selected default gateway interface, selec[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 61  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the IPoA connection is succes sful, you can acces s the I nternet.  Steps 1~7 above for IP oA Users ----------------------------- ---------------------- ----------------[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 62 2.2.2 For ETH In terface Follow ing 7 modes are for you t o choose according to y our actual Int ernet service. ETH PPPoE 1) IPv4 Only 2) IPv4&I Pv6 (Dual St ack) 3) IPv6 Only IPoE 4) IPv4 Only 5) IPv4&I Pv6 (Dual St ack) 6) IPv6 Only 7) Bridging 1) PPPoE IPv4 Only Users If you confi gure th[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 63  Finish PPP User name and Password an d other settings on t he figure below . Click Next .  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address in A vailable R outed W AN Interfaces box and move it into Selected Default Gat[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 64 default sett ing is recomm ended. Then cli ck Next .  T o configure the W AN DNS address, cli ck the Select DNS Server Interface fr om available W AN interfaces option, or select the Use the following S tatic DNS IP address option and enter the stat ic DNS server IP addresses provi ded by your I [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 65  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the PPPoE connect ion is successful , you can access the In ternet.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 66  Steps 1~6 above for P PPoE and IPv4 Onl y users -------------------------- --------------------- ------------------------ --------------------- --------------------- ---------- 2) PPPoE IPv4&IPv6 (Dual S tack) User s If you confi gure the ETH Interfac e (Ethernet uplink) an d select eth0/eth[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 67  Configure PPP Usernam e and Password and other settings on the figure below . Each field with its indication is menti oned above in PPPoE and IPv4 users-  section. If ISP provides y ou no static I P v4 or I P v6 address, y ou just ke ep the default settings for it’ s by defaul t the DHCP mo[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 68  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address. Then click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 69  T o configure the W AN D NS address, finish both th e IPv4 setting and IPv6 setting. Click Next .  Click Apply/Sav e to save y our settings if every thing is correctly set.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 70  Here y ou can view your conf igurations. When the PPPoE connect ion is successful , you can access the I nternet.  Steps 1~6 above for P PPoE and IPv4&IP v6 (Dual S tack) users ------------- -------------------- ------------------- -------------- ------------------------ ------ 3) PPPoE I[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 71  Select PPP over Ethernet (PPPoE) . Edit the Enter Service Description field which is opti onal. Suggest you keep the default. Sel ect a network protocol : IPv6 Only . Click Next .  Configure PPP Usernam e and Password and other settings on the figure below . Each field with its indication is [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 72  T o conf igure the D efault Gateway inter face when using IPv6, select the interface that you want to configure with the W AN gateway address in Select ed W AN I nterface box. Then click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 73  T o configure the W AN DNS address, check the Obtai n IPv6 DNS info from a W AN interface opt ion, or select the Use the following St atic IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP . At last, cli ck Next .  Click Apply/Sav e to save y our setti[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 74  Here y ou can view your conf igurations. When the PPPoE connect ion is successful , you can access the I nternet.  Steps 1~6 above for P PPoE and IPv6 Onl y users -------------------------- --------------------- ------------------------ ------------ --------------------- ------------------- 4[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 75 default. Select a network prot ocol: IPv4 Only . Cli ck Next.  Finish W AN IP Settings on the f igure below . Click Next .  Finish Net w ork Address T ranslati on Settings . Suggest t o keep the default set tings. Click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 76  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address in A vailable R outed W AN Interfaces box and move it into Selected Default Gateway Interfaces box. The default sett ing is recomm ended. Then cli ck Next .  T o fini sh [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 77  Click Apply/Sav e to save y our settings if every thing is correctly set. [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 78 Here y ou can view your conf igurations. When the IPoE c onnection is successful, y ou can access the I nternet.  Steps 1~7 above for IP oE and IPv4 Only user s ----------------------- --------------------- --------------------- ------------------------ --------------------- ------------- 5) IPoE[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 79  T o finish W AN IP Settings, select Obtain an IP/IPv6 addr ess automatically , check Dhcpv6 Pre fix D elegati on (IAPD) . If your ISP is usin g stateful DHCPv6, check Dhcpv6 Address Assignment (IANA) also. O r select Use the following S tatic IP/IPv6 ad dress if y our ISP provide y ou with an IP[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 80  Finish Netw ork Address T ranslation Settings. Su ggest to keep t he default setti ngs. Click Next .  T o configure the Default Gateway interface, select the interface that you want to configure with the W AN gateway address. Then click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 81  T o configure the W AN D NS address, fi nish both the IPv4 set ting and IPv6 set ting. Click Next .  Click Apply/Sav e to save y our settings if every thing is correctly set.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 82  Here y ou can view your conf igurations. When the IPoE connect ion is successful, y ou can access the I nternet.  Steps 1~7 above for IP oE and IPv4&IPv6 ( Dual S tack ) Users -------------------- --------------------- --------------------- ------------------------ ------------ 6) IPoE IP[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 83  Select IP over Ethernet (IPoE ) . Edit the Enter Service Description fiel d which is optional. Suggest you keep the default. Select a network prot ocol: IPv6 Only . Cli ck Next .  Finish W AN IP Settings on the fi gure below . Click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 84  Finish Netw ork Address T ranslation Settings. Su ggest to keep t he default setti ngs. Click Next .  T o conf igure the D efault Gateway inter face when using IPv6, select the interface that you want to configure with the W AN gateway address in Select ed W AN I nterface box. Then click Next[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 85  T o configure the W AN DNS address, check the Obtai n IPv6 DNS info from a W AN interface opt ion, or select the Use the following St atic IPv6 DNS address option to enter the static DN S server IPv6 addresses provided b y you r ISP . At last, cli ck Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 86  Click Apply/Sav e to save y our settings if every thing is correctly set.  Here y ou can view your conf igurations. When the IPoE c onnection is successful, y ou can access the I nternet.  Steps 1~7 above for IP oE and IPv6 Only Users -------------------- ------------------ ---------------[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 87  Select the E TH interface y ou added just now from the pull-down m enu in the figure below . Click Next .  Select PPP over Ethernet (PPPoE) . Edit the Enter Service Description field which is opti onal. Suggest you keep the default. Sel ect a network protocol : IPv4 Only . Click Next.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 88  Here y ou can view your conf igurations. Click Apply/Sa ve to save y our settings if ev er yt hing is correctly set.  Wh en the conne ction is succes sful, you can access the Internet.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 89  Steps 1~3 above for Bri dging Users -------------------------- ------------------ --------------------- ------------------------ --------------------- --------------- ------------------- --- 2.3 LAN Click Advanced > LA N to configure the LAN IP Address and Subnet Mask. This IP address is to b[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 90  IP A ddr ess/Subnet Mask : The device's L AN IP address and subnet mask that both you can change to fit your network. The def ault IP address i s 192.168.1.1. Once y ou change the L AN IP address, you need t o use the new add ress to login to the Mana gement page to conf igure the m odem ro[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 91 2.3.2 IPv6 Autoconfig IPv6 address can only be Aggregatable Global Unicast Addresses and Unique Local Address. Link-L ocal Unicast Addresses and M ulticast Addresses are not per mitted. Click Advanced > LAN > I Pv6 A utocon f ig to enter the IPv6 address setti ng page.  Interface Address : [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 92 When computers get the message, they will take the rout er ’ s IP address as the secondary route for easy use. In additi on, checking R ADVD can also broadcas t the prefix addres s generated from the computer in the L AN.  Enable IGMP Snooping : C heck to enable the IGMP Snooping feature. IGMP [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 93 server , but the firewall and N A T function of your router stop visitors from accessing computer s in the LAN. Solution: Set v irtual server r ules to all ow visitors to access the server vi a W AN I P address of your router . Click Advanced Setup > NA T > Vi rtual Servers to ent er the virtu[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 94 Prot ocol: Select the prot ocol from t he P rotocol dro p-down list. I f y ou are unsure, select TCP/UDP . Internal Port S tart/Internal Port End: The ports us ed by the serv er in the LAN. After all the configurations, visitors on the Internet can access your server b y simply using “Protocol Nam[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 95  Select the W AN interface ipoe_eth/eth0.1 her e.  Input the word w eb in the Custom Service field. Then manually enter the port num ber 10480 in the Extern al Port S tart and External Port End fields, and enter the port number 8090 in the Internal Port S tart and Internal Port End fields. Act[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 96  Click Apply/Sa ve next to the Server IP Addr ess or click Ap ply/Save next to the p ort number table. Result: Y our friend on the I nternet wil l be able to access y our web server simply by entering “h ttp: //1.2.3.4:10480 ” in brow ser . Actually if you set the DNS i n 2.9, your friend can[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 97 Here in the Port T rigg ering interface, you can configure the port setti ngs by selecting an existing applicat ion or creati ng your own (Cust om applicati on).  User Int erface: Select th e W A N interface you w ill use to visit the server in y our LAN.  Configure the Applicati on Name > [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 98 2.4.3 DMZ Host The default D MZ (De- Militarized Zone) host feat ure is helpful when y ou are using som e onli ne games and videoconfer encing applications that are not compatible with NA T (Network Address Tr anslation). Note that enabling DMZ host means the built- in firewall of your router takes [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 99 2. 5 Security 2.5.1 IP Filtering  Outgoing IP Filtering Set up If you w ant to limit com puters in the LAN to access the I nternet, go to Outg oing section to set the router . Click Advance Set up > Sec urity > IP Filtering > Outg oing , and then click Add to configure out going IP filte[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 100  Source I P addr ess [/pr efix length]: Enter the L AN IP address to be fi ltered.  Source Port (port or port: port): Specify a port number or a range of ports used by LAN PCs to access the Inter net. If you are uns ure, leave it blank.  Destination IP address [/prefix length]: Specify the[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 101  Filter Name: Specify a new filter nam e for identifying the i ncoming IP traf fic.  IP V ersion : Select either IPv4.  Prot ocol: TCP/UDP , TCP , U DP and I CMP are avail able for your opt ion.  Source I P addr ess [/pr efix length]: Enter the I nternal IP address [/pref ix length] to [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 102  Here y ou can create a filter to identify the MAC lay er fram es by specifying at least one condition below . If multiple conditions are s pecified, all of t hem take ef fect.  Prot ocol T ype: Select a prot ocol type from the drop-down list.  Destination MAC Addr ess: Enter the des tinat[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 103  Browser's MAC Addr ess: This section will automatical ly add the MAC address of the attached L AN device where the browser i s running.  Other MAC Address: S pecify MAC address of t he comput er which you want to apply Internet access restriction to.  Days of the week: Click to sel e[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 104 2.7 Bandwidth C ontrol Cl ick Adva nced Setup > Bandwidth Contr ol , and check Bandwidth Contr ol to enable t his feature on the scree n.  Up to 16 entries can be allow ed.  Description: Enter the descri ption of the controlled ho st.  IP Addr ess Range: Enter the IP address of the host[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 105  Add: Aftre finishing the bandwidth control set tings, click Add to generate the cont rol rule.  Apply/Save: Click this butt on to activate y our configurations. 2.8 Routing 2.8.1 Default Gateway This section is to set the default forwarding interface of the data in the same network segm ent [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 106 2.8.2 S tatic Route It is not r ecommended to use this setting unles s you ar e familiar with st atic routing. In most cases, dynamic routing is recommended, because this feature allows the router to detect the physical changes of the network l ayout autom atically . If you want to use static routi[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 107 the specified network 2.2.3.3, 255.255.0.0 can be exp ressed as “2.2.0.0/16” indicating all hosts that starts with “2.2”.  Interface: Select an inter face from the drop-down list according to your need. This interface can be the one on the LAN side or W AN side t hat data wil l forwarded[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 108 In this case, you should go to Advanced Setup > W AN Service > Network Address T ranslation Settings to disable NA T . Then go back here . Y ou should be display ed with the foll owing figure. Operation-P assive indicates the RIP -enabled router will automat ically tell other surrounding RIP-[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 109  Check the Select DNS Server Interface from available W A N interfaces optio n . OR select the Use the following S tatic DNS IP addr ess option and ent er static DNS serv er IP addresses for the sy stem.  Click Apply/Sa ve at the bottom of the page. For IPv 6  Click Advanced Setup > DNS[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 10  Select the Obtain IPv6 D NS info fr om a W AN interfac e option, and select a conf igured W AN interface f or the IPv6 DNS server i nformation. Or select the Use the following S tatic IPv6 DNS addres s option and enter the s tatic IPv6 DNS serv er Addresses.  Click Apply/Sa ve . Note 1. DNS[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 111  Click the Add button to configure t he DDNS settings.  D-DNS Pr ovider: Select your DDNS serv ice provider from the drop-down menu.  Hostnam e: Enter the DDNS dom ain name regist ered with your DDNS service prov ider .  Interface: Sp ecify a W AN connection i nterface.  Username: En[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 12  Select Dyn DNS.org from the D-DNS provi der drop- down menu.  Enter the Dy ndns hostnam e, xhh3793.dyndns.org .  Specify the W AN conne ction interface, ipoe_et h0/eth0.1 .  Enter the Dy nDNS usernam e, qiangweianbian .  Enter the passw ord of your Dy nDNS.org acco unt, 414637 . ?[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 13 The best DSL configurations are the factory defaults. Only change them if you are instructed by your ISP or our technical staff when y our router fails to negotiate with ISP in DSL (A TM) mode. U sually , this failure can be identif ied and confirmed if the ADSL L ED on the device keeps displaying[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 14  Click T one Sel ection to enter t he prompt window below . Ti p If you are unsure about the ADSL parameter s, please appl y the factory default settings. W rong configurations may fail your I nternet access. 2.1 1 UPnP UPnP (Univ ersal Plug and Play) allows W indows based s yst e ms to configu[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 15  Enable UPn P: Check/uncheck to e nable/disable the UPnP f eature.  Click Apply/Sa ve . Note UPnP is activ ated only when there i s a live W AN service wi th NA T enabled. 2.12 Print Server Enabling Pri nt Server makes all PCs on the LAN have an access to the USB printe r which has been conn[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 16  Enable USB pri nting service of t he device (the router ). First , enter the name of t he USB printer i n Printer nam e box. Then, enter t he manufacturer and m odel of the USB pr inter in the Mak e and model box. At last, cli ck Apply/Save .  Add the print er from your local PC (In W indow[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 17 S tep 3: Sel ect A network printer , or a printe r attache d to another computer and click Next ; S tep 4: Sel ect Connect to a pri nter on the Internet or on a home or office network ; T ype in “htt p://192.168.1.1:631/pri nters/hp3845” i n the URL field and click Next ;[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 18 Note Here “192.168.1.1” refers to this router ’ s L AN I P address and “hp3845” refers to the USB printer name you’ve filled in on the Print Serv er Settings page. S tep 5: Inse rt the printer driv er CD into your com puter and click Have Di sk… ; S tep 6: Cli ck Browse , select driv[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 1 19 S tep 7: Sel ect the manufactur er and the model of y our printer . And click OK . S tep 8: Cho ose “Y es” or “No” for def ault printer sett ing and click Next .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 120 S tep 9: Cli ck Finish . Check the st atus of printer from W indows “Control Panel”, print er window . Stat us should be shown “ready ”.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 121 2.13 S torage Service This section hel ps you to use USB S torage dev ices in your m odem router , including the following par ts: • U ser Account: Y ou can contr ol the L A N users’ acces sing to the USB storage dev ice information, namely , some of them can ac cess the USB dev ice info but ot[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 122  Usernam e : Name your USB storage account.  Password: Speci fy a passwor d to secure your USB storage account.  Confirm Pass word: Enter y our password again for a confirmation.  V olumeName: Enter the volum e name of the USB stor age, which is display ed in the S torage Device I nfo p[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 123 After your modem router recognizes the USB storage dev ice, follow guidel ines below for visiting t he storage info via the computer on the LAN. Here takes Windo w s 7 as an exam ple to explain the gui delines which are similar in other operation sy stems.  Press Win+ R buttons. On the Run win d[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 124  A ccount authenticati on: Enter y our user account name and password which were configured in User Account par t in the correspondi ng box, and cli ck OK . Then y ou can see the detail ed info within the USB dev ice. 2 .1 4 Interface Gr ouping Inter face Grouping support s mul tiple ports to PV[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 125  Click Add to enter the scr een below . Gr oup Name: The name of a configured rule. W AN Inter face used in the gr ouping: W AN connecti on to which the i nterface grouping rules apply . A vailable LA N Interfaces: L AN interfaces that can be used for interf ace grouping. Gr ouped LAN Interfaces[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 126  En ter the Group name which s hould be unique.  Select the W AN inter face t hat ’ s shared by t he LAN inter faces in the interface grou p.  Select interfaces that will be connected to the specified W AN y ou will use . Note that these clients may obtain public IP addresses.  Click [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 127 Note 1. A fter the set tings above, you need to reboot the m odem router to take t he settings into ef fect. 2. After the settings abo ve, the LAN IP address used by the Default group mem ber is 192.168.1.1, the LAN IP of the second group m ember is 192.168.2. 1. LAN IPs of t he following groups fo[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 128  T unnel Name: Speci fy the name of the t unnel.  Mechanism : Currently , o nly 6RD conf iguration is suppor ted.  Associated W AN Inte rface: Specify t he W AN interf ace of the tunnel.  Associated L AN Interface: Specify the LAN interface of the tunnel.  Manual: I f you select Manu[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 129  T unnel Name: Speci fy the name of the t unnel.  Mechanism : Currently , o nly DS-L ite configuration is support ed.  Associated W AN Inte rface: Specify t he W AN interf ace of the tunnel.  Associated L AN Interface: Specify the LAN interface of the tunnel.  Manual: I f you select [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 130 T o create a cert ificate signi ng request:  Click the Cr eate Certific ate Request button t o enter the page bel ow .  Specify the Common Nam e, Organization Nam e and S tate/Province Name  Enter the 2- letter Country Code for the certificat e.  Click Apply to a pply your se ttings.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 131 T o Import certi f icate ：  Click the Im port Certificate but ton on the local cert ificates page to enter t he page below .  Enter the certi ficate name.  Paste the cert ificate content and private key .  Click Apply to a pply your se ttings. 2.16.2 T rusted CA (Certif icate Authorit[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 132 T o Import certi f icate ：  Click the Im port Certificate but ton to enter the page below .  Enter the certi ficate name.  Paste the cert ificate content .  Click Apply to a pply your se ttings.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 133 2.17 Multicast T o configur e IGMP for IPv4  Check the L AN to LAN (I ntra LAN) Multicast Enabl e box.  Check the Me m bership Join Im mediate (IPTV) box. This i s only requir ed for IPTV .  Keep ot her options unchanged from factory defaul ts if you are not an a dvanced user . This is s t[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 134 2.18 IPTV If y ou check the Enable IPTV checkbox, you must choose a lay er2 interface, and then configure the PVC/VLAN info (A TM), or E TH port/VLAN info (ETH). Click Apply/ Save button to save i t. Enable IP TV : Check/unc heck to enable/disabl e the IPTV service.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 135 IPTV configuration for Phone Cable Access user : 1) Enable IPTV . 2) Select L a yer2 int erface: A TM Interface . 3) Configure an av aliable VPI/VCI value w hich should be prov ided b y your I SP . 4) Click Apply/Save . IPTV configuration for Ethernet Cable Access us er: 1) Enable IPTV . 2) Select [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 136 3.1.1 Basic Click W irel ess > 2.4G > Basic to enter the page where you can configure the basic settings of the wireless network of 2.4GHz. Enable Wir eless: check/unc heck to enable/di sable the wireless net work of 2.4GHz. Hide Access Point: This option allows you to have your wireless netw[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 137 WPS Setup Wi -F i Protected Setup makes it eas y for home users who know little of wireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or configuring compl icated settings. Simply enter a PIN code on the dev ice web i[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 138 Network Authentication: Select O pen, Shared, 802.1 X, W P A - P SK, WP A2-PSK or Mixed WP A/ W P A2-PSK from the drop-down l ist to encrypt your wir eless network. Depending o n the type of net work authentication y ou select, y ou will be prom pted to enter corresponding set tings. WEP Encryption[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 139 MAC Restrict Mode ： Disabled, Allow a nd Deny  Allow: Allow only PCs at specified MAC addr esses (in the li st) to connect to y our wireless networ k.  Deny: Bloc k only PCs at spe cified MAC addresses fr om connecting to y our wireles s network.  Disabled: Disa ble MAC filter feature. A[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 140 Note 1. If you select “ A llow” M AC restrict mode and directl y click A pply/Save instead of adding any MAC address to be filtered, WPS will be disabl ed (Y ou can go to Wi reless > Securit y to check W PS status). 2. If y ou want to change the MAC filter m ode above from “All ow” to ?[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 141 functionali ty . Selecting Access Point enables access p oint functionality . W ireless bridge functionality will still be av ailabl e and wireless stat ions will be able to associ ate to the AP . Bridge Action : There are three options avail able: Enabled , Enabled (Scan) and Disabl ed . Select Di[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 142 Enable Wir eless: check/unc heck to enable/di sable the wireless net work of 5GHz. Hide Access Point: This option allows you to have your wireless network names (SSID) publicly broadcast or if you choose to enabl e it, the SSID w ill be hidden. SSID: Servi ce Set Identifi er . This is the name of y[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 143 WPS Setup Wi -F i Protected Setup makes it eas y for home users who know little of w ireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or configuring compl icated settings. Simply enter a PIN code on the dev ice web [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 144 WPS (hardwar e button): P ress the hardware WPS butt on on the device for 1 second and the WPS LED wil l keep blinking for about 2 minutes. W ithin the 2 m inutes, press the WPS button on your wireless co mputer or other device. When the WPS display s a solid light, t he device has joined y our wir[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 145 WP A/W A PI passphrase: Ent er a WP A/W API network key . WP A Gr oup Rek ey Interval: Specify a key update inter val. WP A/W A PI Encryption: Sel ect TKI P , AES, or TK IP+AES. Apply/Save: Click it to apply the current configurations. 3.2.3 MAC Filter Click Wir eless > 5G > MAC Filter to ent[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 146 Note 1. If you select “ A llow” M AC restrict mode and directly c lick A pply/Save instead of adding any MAC address to be filtered, WPS will be disabl ed. 2. If y ou want to change the MAC filter m ode above from “All ow” to “Deny” , just select Deny and click Apply/ Save . 3.2.4 W ir [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 147 AP Mode: Y ou can se lect W ireless Bridge (also known as W ireless Di stribution Sy stem) to disable access point functionali ty . Selecting Access Point enables access p oint functionality . W ireless bridge functionality will still be availabl e and wireless stat ions will be able to associ ate [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 148 4. Dia gnost ics 4.1 Diagnostics The m odem router is capable of testing the connection to y our DSL service provider , the connection to y our Internet service provider and the connection to your local network. If a test displays a fail status, click "Rerun Diagnostic T ests" at the bott[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 149 5. Mana geme nt 5.1 Settings 5.1.1 Backup Here y ou can save a copy of your device’ s configurations to your co mputer . Once you have configured the device, you can save these settings to a configuration file on your local hard drive. The configurat ion file can later be import ed to your dev ic[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 150 Note The backup file is named as “backupse ttings” and suf fixed by .conf. For bett er memorizing, you can change the nam e, but do not change the file suf fix. 5.1.2 Restore Backup Here y ou can restore the con figuration from a file saved on y our P C. T o update the firm ware:  Click Br o[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 151 5.1.3 Restor e Default Under some circum stances (for exampl e, you cannot visit a website or u nfortunately forget the login password), you may need to rem ove the existing conf iguration and rest ore the factory default settings. T o restor e the device to factory default : Method 1: Click Restor[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 152 T o configure the Sy stem Log, cl ick Configure Syst em Log . Log: If Enable i s selected, the sy stem will begin t o log all the selected ev ents. Log Level: All event s above or equal to the sel ected level will be logged. Display Level : All logged ev ents above or equal to t he selected lev el [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 153 T o configur e SNMP Agent:  Enable SNM P agent .  Configure the read operation command between SNMP managem ent and SNMP agent. Read Com munity-SNM P agent allow s SNMP managem ent to read variabl e in MIB with read comm unity .  Configure the read and write operation command between SNMP [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 154 Ti me Server: Inter net time server dom ain. T o configur e Internet tim e:  Check Autom atically synchr onize with Inte rnet time server s box.  Select a NT P tim e server from the drop-down list. If the N TP t ime server y ou are looking for is not includ ed in the li st, select “Other”[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 155 Apply/Save: Click this button to sa ve configurations. Note Password cann ot contain a space. 5.5.2 Access Control - Service Here y ou can manage the dev ice either from L AN or W AN si de using HTTP , I CMP , T ELNET , and SNM P . HTTP: Enabling the corr esponding side (LAN/W AN) HTT P makes the d[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 156 T o update softwar e, do as follow s:  Download t he latest firmwar e from our websi te: www .tendacn.com .  Click the " Browse" button to locat e and upload the f irmware file.  Click the " Update Software" button to start updat ing. Note The update proc ess takes abou[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 157 A ppendix 1 Configu r e Y our PC Screens to co nfigure T CP/IP properties in other O perating Sy ste ms ar e similar to those below . W indows 8  Right click t he icon on the bottom right corner of y our desktop.  Click Open Net work and Sha ring Center .  Click Ethernet - > Prope rties[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 158  Select Obtain an IP add ress autom atically and Obtain D NS server a ddress aut omatically and cli ck OK .  Click OK on the Et hernet Pr operties window (see  for the screenshot ).[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 159 W indows 7  Click the icon on the bo ttom right corner of your desktop.  Click Open Net work and Sha ring Center . Ti p If you cannot find the icon on the bottom right corner of your desktop, follow steps below: Click S tart -> Contr ol Panel -> Net work and Internet - > Network and [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 160  Select Obtain an IP add ress autom atically and Obtain D NS server a ddress aut omatically and cli ck OK .  Click OK on the Loc al Ar ea Connection Pr operties window (see  for the s creenshot).[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 161 W indows XP  Right click My Network Places on your desktop and select Properties .  Right click L ocal Are a Connection and s elect Pr operties .  Scroll down t o find and double cl ick Internet Pr otocol (TCP/I P) .  Select Obtain an IP add ress autom atically and Obtain D NS server a [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 162  Click OK on the Loc al Ar ea Connection Pr operties window (see  for the s creenshot). MA C Click on the A pple icon from the top-left corner and s elect System Pr efere nces . [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 163 [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 164 A ppendix 2 W iFi Connecti on W indows 8  Click the icon on the bo ttom right corner of your desktop.  Select y our wireless network from the list, cl ick Connect and then foll ow onscreen instruct ions. Ti p 1. If you cannot find the icon , please move your mouse to the top right corner of y[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 165 W indows 7 1. Click the ico n on the bottom right corner of y our desktop. 2. Double click y our SSID (w ireless network nam e) and then follow onscr een instructions. 3. When your SSID (wirele ss network nam e) displays C onnected as shown below , you’ve connected to it for Internet access succe[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 166 W indows XP 1. Right click My Network Places , and select Properti es . 2. Right click Local A r ea Connection , and select V iew A vailable W ir eless Networks f ro m the pop- up submenu. 3. Select y our wireless net work from the list and then follow onscreen inst ructions.[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 167 4. When y our SSID (w ireless network nam e) displays Connected as shown below , you’ve connected to i t for Internet access successful ly . MA C Click > System Prefer ences .[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 168   [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 169 iPhone/iPad  [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 170 [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 171 A ppendix 3 F AQs 1. I cannot acc ess the device' s management i nterface. What sh ould I do? 1) V erify the physi cal connecti on (namely , the Ethernet cabl e) between y our PC and the device. For detail s, see Chapter 2 Hardwar e Install her eo f. 2) Double check the TCP/I P set tings on yo[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 172 2) L og in to the device, select W ireless > 2.4G/5G > Basic and change the wirel ess network name (SSID). Then connect agai n. 3) L og in to the devi ce, select Wir eless > 2.4G/5G > Secu rity and change the s ecurity set tings. Then con nect again. 5. Wher e should I pl ace the wir el[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 173 A ppendix 4 VPI/V CI List The followi ng table lists comm on ISPs and their VPI and VCI numbers. If you cannot locate your ISP and their VPI and VCI inform ation here, ask your ISP to provide it. Country ISP VPI VCI Encapsulation Australia T elstra 8 35 PPPoA LLC Australia GoldenIT 8 35 _PPPOA_V CM[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 174 Brazil T elmar 0 33 PPPoE LL C Brazil South Region 1 32 PPPoE LL C Canada Primus Cana da 0 35 PPPoE LL C Canada Rogers Cana da (1) 0 35 PPPoE LL C Canada Rogers Cana da (2) 8 35 1483 Bridged I P L LC Canada Rogers Cana da (3) 0 35 1484 Bridged I P L LC Canada BellSouth(1) Canada 8 35 PPPoE LL C Can[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 175 Hungary Sci-Netw ork 0 35 PPPoE LL C Iceland Islandssim i 0 35 PPPoA VC-MU X Iceland Simi nn 8 48 PPPoA VC-MU X India Airtel 1 32 1483 Bridged I P L LC India BSNL 0 35 1483 Bridged I P L LC India MTNL 0 35 1483 Bridged I P L LC India RELI ANCE CO MM UN ICA TION 0 35 PPP oE LL C India T A T A INDI C[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 176 Italy 8 35 1483 Bridged I P L LC Italy 8 35 PPPoA VC-MU X Jamaica (1) 8 35 PPPoA VC-MU X Jamaica (2) 0 35 PPPoA VC-MU X Jamaica (3) 8 35 1483 Bridged I P L LC SNAP Jamaica (4) 0 35 1483 Bridged I P L LC SNAP Kazakhst an Kazakht elecom « Megaline» 0 40 LL C /SNAP Bridging Kazakhst an 0 33 PPPoA VC[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 177 Portugal 0 35 PPPoE LL C Puerto Rico Coqui.net 0 35 PPPoA LLC RomT elecom Romania: 0 35 1483 Bridged I P L LC Russia Rostel 0 35 PPPoE LL C Russia Port telecom 0 35 PPPoE LL C Russia VNTC 8 35 PPPoE LL C Saudi Arabia (1) 0 33 PPPoE LL C Saudi Arabia (2) 0 35 PPPoE LL C Saudi Arabia (3) 0 33 1483 Br[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 178 Spain Uni2 1 33 1483 Bridged I P VC-MU X Spain Orange 8 35 1483 Bridged I P VC-MU X Spain Orange 20 M egas 8 35 LL C -BRIDGI NG Spain Orange 8 32 1483 Bridged I P L LC/SNAP Spain Y a.com 8 32 1483 Bridged I P VC - MU X Spain Y a.com 8 32 1483 Bridged I P L LC/SNAP Spain W anadoo (3) 8 32 1483 Route[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 179 United S tates A T&T (3) 0 35 1483 Bridged I P L LC United S tates August.net ( 1) 0 35 1483 Bridged I P L LC United S tates August.net ( 2) 8 35 1483 Bridged I P L LC United S tates BellSouth 8 35 PPPoE LL C United S tates Casstle.Net 0 96 1483 Bridged I P L LC United S tates Century T el (1) [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 180 United S tates Sprint (2) 8 35 PPPoE LL C United S tates Sprint T erritory 0 35 PPPoE LL C United S tates SureW est Comm unications(1) 0 34 1483 Bridged L LC Snap United S tates SureW est Comm unications(2) 0 32 PPPoE LL C United S tates SureW est Comm unications(3) 0 32 PPPoA LLC United S tates T [...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 181 A ppendix 5 R e gu la tor y Compliance Inf or ma tion CE Mark W arning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be requi red to take adeq uate measures. This device com plies with EU 1999/5/E C. NOTE: (1) The m anufa[...]

W ireless AC1200 ADSL2+ Dual Band Modem Router 182 NOTE: (1) The m anufacturer is not resp onsible for any radio or TV interference caused by unauthorized m odifications to this equipm ent. (2) T o avoi d unnecessary radi ation interference, it is r ecommended to use a shi elded RJ45 cable.[...]