Tekkeon ET3000 инструкция обслуживания

ET3000 User Guide Bluetooth Headset with OLED Display[...]

[...]

USER GUIDE Contents Overview ..........................................................................................................................................................2 Getting Started ..................................................................................................................................................2 U[...]

2 Over view ezT alker ™ digital by T ekkeon is a Bluetooth ® headset with a unique OLED digital display that lets you cut loose from your Bluetooth mobile phone. With advanced features like stored number redial, last number redial and voice dialing, you can use the headset to make and receive calls without every touching your mobile phone. Y ou [...]

Getting to Know ezT alker digital 3 USER GUIDE VOLUME DOWN Button Decreases the speaker volume, initiates last number redial and call waiting, and enables scrolling through phone book OLED Digital Display Provides caller ID and call status, and visual indication of audio and headset connection, volume level, and headset battery level VOLUME UP Butt[...]

4 Setting Up ezT alker digital Before using ezT alker digital, you must: • Charge ezT alker digital • Pair ezT alker digital to your mobile phone • Adjust ezT alker digital to your ear preference Directions for each of these activities are provided in the following three sections. Once these steps are completed, you will be ready to use ezT a[...]

5 USER GUIDE Pairing ezT alker digital to Y our Mobile Phone Pairing is the process of linking the headset with your Bluetooth mobile phone or other Bluetooth device that supports a headset and/or handsfree profile. Before using ezT alker digital with your mobile phone you must pair the devices. After this process is complete, you can use the heads[...]

6 T o Cancel Pairing Mode While you are in pairing mode, you can cancel the pairing process and turn off the headset. 1. While in pairing mode, press and hold the T ALK button approximately three seconds until “Off” appears on the display and the headset turns off. Wearing ezT alker digital ezT alker digital is designed to fit comfortably in yo[...]

7 USER GUIDE Using ezT alker digital Powering ezT alker digital T o T urn On the Headset 1. Press and hold the T ALK button approximately four seconds until “On”, then “Standby” appears on the display , or until you hear the ON tone. The headset turns on and is placed in standby mode, ready to make and receive calls. Note: T o conser ve pow[...]

8 The icons in the first two positions will change according to the mode. Following is a description of the icons: Headset has no audio connection/Headset is in talk mode Headset is in standby mode/Headset is in talk mode V olume level Battery level 7148321266 T ekkeon Ring... Icons Caller ID Caller Name Status[...]

9 USER GUIDE Making Calls Y ou can make calls from your mobile phone, or directly from ezT alker digital using the last number redial feature, voice dialing commands, the stored number redial feature, or by accessing your mobile phone book from the headset (if these features are supported by your mobile phone). T o Make Calls from Y our Mobile Phon[...]

10 T o Make Calls Using Stored Number Redial 1. With the headset off, press the VOLUME UP button to turn on the display and put the headset in stored number browse mode. The display will turn on. 2. Press the VOLUME UP button (forward) or VOLUME DOWN button (backward) to scroll through the numbers stored in your mobile phone until you reach the des[...]

11 USER GUIDE Receiving Calls When you receive a call on your mobile phone, you will hear the mobile phone ring before you hear the ring tone through your headset as there is a small delay before the headset recognizes the incoming call. If you do not wish to answer the call, you can use the Call Reject feature to reject the call and send the calle[...]

12 Ending Calls 1. When you have finished your call, press the headset T ALK button. The call will be disconnected. T ransferring Calls Y ou can transfer calls from your mobile phone to your headset, and from your headset to your mobile phone. T o T ransfer Calls from Y our Mobile Phone to the Headset 1. Press any button on the headset to turn on t[...]

13 USER GUIDE Browsing the Phone Book Directly from your headset, you can browse and dial numbers stored on your mobile, if supported by your mobile phone. NOTE: Phone numbers stored on the phone (not on the SIM card) are displayed in the order they were stored on your mobile phone, not in alphabetical order . Some mobile phones only display the fi[...]

14 T o Enable Caller ID/Name 1. With caller ID disabled, simultaneously press the VOLUME UP and VOLUME DOWN buttons. “ID enabled” will appear on the display . Adjusting the Volume The volume can be adjusted using the volume controls on ezT alker digital or your mobile phone. T o Increase the Volume 1. While in talk mode, press and release the V[...]

15 USER GUIDE Visual and Audible Indicators ezT alker digital uses visual and audible indicators to provide the status of the headset. For visual indicators, the headset provides caller ID, display icons to indicate headset state, connection status, and volume and battery level, and text and a blue LED that provide operation status. The icons are d[...]

16 Visual and Audible Indicators (continued) LED Status Indicators Status Indicates Flashes at two-second intervals Headset is in standby mode, ready to make and receive calls. Is off Headset is off. Audible Indicators T one Indicates Double beep, increasing in pitch Headset has been turned on. Double beep, decreasing in pitch Headset is about to t[...]

17 USER GUIDE T roubleshooting Issue Solution When you initiate the Bluetooth device pairing feature on your mobile phone, your phone cannot find ezT alker digital. Y our ezT alker digital headset is not communicating with your mobile phone. Y ou ar e encountering poor reception via the ezT alker digital headset. Y ou cannot browse numbers stored i[...]

18 T roubleshooting (continued) Issue Solution When you receive a call on your mobile phone, the call is not automatically connected to ezT alker digital after you press the T ALK button. Even though your headset is turned on, the call is not automatically connected to ezT alker digital when you dial a number on your mobile phone. Y ou hear a crack[...]

19 USER GUIDE Limited W arranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period T ekkeon, Inc. will replace the defective product when the owner returns all product contents. The limited warranty will be co[...]

20 FCC Statement for Class B Digital Devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate rad[...]

Customer Support If you product is in need of repair or replacement, please contact the T ekkeon Customer Support Center at: T ekkeon, Inc. c/o ezT alker digital 3002 Dow Avenue, #134 T ustin, CA 92780 888-787-5888 / 714-832-1266 www .tekkeon.com T ekkeon, Inc. will issue a Return Merchandise Authorization (RMA) number for all repairs or exchanges.[...]

www .tekkeon.com © 2005 T ekkeon, Inc. All Rights Reserved ezT alker™ is a trademark of T ekkeon, Inc.[...]