Sony MZ-NF610 инструкция обслуживания

SERVICE MANUAL POR T ABLE MINIDISC RECORDER US Model Canadian Model SPECIFICA TIONS MZ-NF610 US and f oreign patents licensed from Dolby Laboratories. – Continued on ne xt page – Model Name Using Similar Mechanism MZ-R410 Mechanism T ype MT -MZN710-177 Optical Pick-up Name LCX-5R V er 1.0 2003. 03 9-877-144-01 Sony Corporation 2003C167800-1 Per[...]

2 MZ-NF610 SAFETY-RELA TED COMPONENT W ARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DO TTED LINE WITH MARK 0 ON THE SCHEMA TIC DIA GRAMS AND IN THE PA R TS LIST ARE CRITICAL TO SAFE OPERA TION. REPLA CE THESE COMPONENTS WITH SONY P ARTS WHOSE P ART NUM- BERS APPEAR AS SHO WN IN THIS MANU AL OR IN SUPPLE- MENTS PUBLISHED BY SONY . A TTENTION A U COMP[...]

3 MZ-NF610 On power sources • Use ho use current, nickel m etal hydride rechar geable battery , LR6 (size AA) battery , or c ar ba tter y . • Fo r use in your hou se: Do not use any other AC po wer ada ptor sinc e it m ay cause the recorder t o malfunct ion . • C onnect the AC po we r adaptor to an ea sily accessib le AC outlet . Should you n[...]

4 MZ-NF610 NO TES ON HANDLING THE OPTICAL PICK-UP BLOCK OR B ASE UNIT T he laser diode in the optical pick-up block may suf fer electro- static break-do wn because of the potential difference generated by the c harged electrostatic load, etc. on clothing and the human body . During repair , pay attention to electrostatic break-down and also use the[...]

5 MZ-NF610 SECTION 2 GENERAL This section is e xtracted from instruction manual. 14 Looking at controls The recor der A Display window B GROUP b utton C X (pause ) button D E ND SEARCH button E MENU button F OPEN button G VOL + * , – button * VO L + has a tactile dot. H 4-way co ntrol ke y EN TER • N * . , > (searc h/AMS) x • CANCEL/CHG (s[...]

6 MZ-NF610 CASE (LOWER) UPPER P ANEL SECTION LCD MODULE, B UTT ON (CONTROL) MECHANISM DECK (MT -MZN710-177) SET CHASSIS ASSY MAIN BOARD In order to remov e mechanism deck, please remov e MAIN board and upper panel section. OP SER VICE ASSY (LCX-5R) HOLDER ASSY DC MO TOR (SLED) (M602) DC MO TOR (O VER WRITE HEAD UP/DOWN) (M603), DC SSM18B MO TOR (SP[...]

7 MZ-NF610 Note: Follo w the disassembly procedure in the numerical order given. 3-2. Case (Lower) 3-3. Upper P anel Section 1 two screws (M1.4) 2 two screws (M1.4) 3 Remove the case (lower) in th e direction of the arrow. 5 torsion spring (pop up-L) 3 two step screws 2 Slide the open slider in the direction of the arrow, and open the upper panel s[...]

8 MZ-NF610 3-4. LCD Module, Button (Control) 3-5. MAIN Board 3 three screws 1 six screws 2 LCD module Note: On installation, adjust the position of both switch and knob (hold). 5 button (control) 4 open locker knob (hold) switch case (upper) sub ass y 8 MAIN board 6 battery ter minal (–) 5 battery ter minal board (+ ) 2 flexible board (motor) (CN[...]

9 MZ-NF610 3-6. Mechanism Deck (MT -MZN710-177) 3-7. Set Chassis Assy The portion which projected is removed. 1 two step screws (MD) 3 mechanism deck (MT-MZN710-177) 2 2 two screws (TP 1.7 × 2.5) 5 set chassis ass y 4 ground spring (USB) 1 tension spring (lock) 3 battery case[...]

10 MZ-NF610 3-8. OP Service Assy (LCX-5R) 4 rack spring 3 screw (M1.4) 1 washer (0.8-2.5) 2 gear (SA) 5 screw (M1.4) 6 thrust detent spring 8 Pull off lead screw. 7 over write head section OP service assy (LCX-5R) 9 Opening the over write head toward the direction A , remove the OP service assy (LCX-5R) toward the direction B . A B Note: Do not ope[...]

11 MZ-NF610 3-9. Holder Assy 3-10. DC Motor (Sled) (M602) 4 holder ass y 3 boss 3 boss 1 convex portion 2 Open the holder assy 2 washer (0.8-2.5) 5 DC motor (sled) (M602) 4 two screws (M1.4) 3 gear (SA) 1 Remove six solders of the motor flexible board.[...]

12 MZ-NF610 3-11. DC Motor (Over Write Head Up/Down) (M603), DC SSM18B Motor (Spindle) (M601) 9 DC SSM18B motor (spindle) (M601) 8 three tapping screws 2 tapping screw 3 motor cover 6 gear (HA) 4 gear (HB) 5 gear (HC) DC motor (over write head up/down) (M603) 3.15 mm gear (HA) Note: Press-fit the gear (HA) up to the position of the DC motor (over w[...]

13 MZ-NF610 Operation in Setting the T est Mode • When the test mode becomes active, first the display check mode is selected. • Other mode can be selected from the display check mode. •W hen the test mode is set, the LCD repeats the following dis- play . 2 In the normal mode, turn on the [HOLD] switch. While press- ing the [GROUP] key press [...]

14 MZ-NF610 Configuration of T est Mode Manual Mode Mode to adjust or check the operation of the set by function. Normally , the adjustment in this mode is not executed. Ho wev er, the Manual mode is used to clear the memor y , power supply adjustment, and laser po wer check before performing automatic adjustments in the Ov erall Adjustment mode. ?[...]

15 MZ-NF610 5. The display changes a shown below each time the [END SEARCH] key is pressed. Howe ver in the po wer mode (item number 700’ s), only the item is displayed. 6. Quit the manual mode, and press the x CANCEL/CHG key to return to the test mode (display check mode). Overall Adjustment Mode Mode to adjust the serv o automatically in all it[...]

16 MZ-NF610 • Description of Indication History Histor y code number Description 1 The first error N The last error N1 One error before the last. N2 T wo errors before the last. R_ T otal recording time Reset the Err or Display Code After servicing, reset the error display code. • Setting Method of Reset the Error Displa y Code 1. Set the test [...]

17 MZ-NF610 • Cause of Sound Skip Error Cause of error Description of error EIB Sound error correction error Play Stat Decoder status error Adrs Address access error BEmp Buf fer is empty BOvr Buf fer is full, and sounds were dumped Record Bful Buf fer capacity becomes less, and forcible writing occurred Rtry Retry times over 4. T o quit the soun[...]

18 MZ-NF610 4. When all the keys on the set and on the remote commander are considered as OK, the following displays are shown. Example1: W hen the keys on the set are considered as OK: Example2: When the keys on the remote commander are con- sidered as OK: 5. When all keys were checked or if the upper panel is opened, the key check mode quits and [...]

19 MZ-NF610 3. Press the X key once more. 4. Press the x CANCEL/CHG key to quit the manual mode, and return to the test mode (display check mode). T emparature Correction • Adjustment Method of T emperature Correction 1. Select the manual mode of the test mode, and set the item num- ber 015 (see page 14). 2. Measure the ambient temperature. 3. Ad[...]

20 MZ-NF610 • Adjustment Method of VC2_LO W (item number: 743) 1. Connect a digital voltmeter to the TP1905 (VCOUT) on the MAIN board, and adjust [VOL +] key (v oltage up) or [VOL - - ] ke y (voltage do wn) so that the v oltage becomes 2.30 ± 0.01V . 2. Press the X key on the set or the key on the remote commander to write the adjusted value. Ad[...]

21 MZ-NF610 • Adjustment Method of REG1 (item number: 745) 1. Connect a digital voltmeter to the TP1909 (REGO1) on the MAIN board, and adjust [VOL +] ke y (voltage up) or [VOL - - ] ke y (v oltage down) so that the v oltage becomes 2.05 ± 0.01V . 2. Press the X key on the set or the key on the remote commander to write the adjusted value. Adjust[...]

22 MZ-NF610 • Adjustment Method of VREC_LO W (X2 speed) (item number: 751) 1. Connect a digital voltmeter to the TP1620 (VREC) on the MAIN board, and adjust [VOL +] ke y (voltage up) or [VOL - - ] key (voltage do wn) so that the v oltage becomes 1.20 ± 0.02V . 2. Press the X key on the set or the key on the remote commander to write the adjusted[...]

23 MZ-NF610 • Adjustment Method of CHGV_HIGH (item number: 756) Note: Remove the r echargeable battery . 1. Connect a digital voltmeter to the B A TT + and B A TT – on the MAIN board, and adjust [VOL +] ke y (voltage up) or [VOL - - ] ke y (v oltage do wn) so that the v oltage becomes 1.80 ± 0.015V . 2. Press the X key on the set or the key on[...]

24 MZ-NF610 Adjustment/checking and Connection Location: IC651 IC852 IC801 IC501 IC361 IC601 IC901 IC951 MAIN BOARD (SIDE B) SL804 D806 Q651 TP1655 TP TP1892 TP1913 TP1921 TP1912 TP1910 TP1906 TP1904 TP1903 TP1519 TP1520 TP1901 TP1923 TP1924 TP1902 C905 SL901 TP1893 TP1356 TP1883 TP1884 TP1885 TP1887 C540 C512 R836 TP1836 TP1842 TP1845 TP1837 TP183[...]

25 MZ-NF610 Po wer Supply Adjustment A uto Item Feed Note: This mode is available to perform the temperature correction and power supply adjustment without entering the manual mode. • Setting method of power supply adjustment auto item feed mode. 1. Set the test mode (see page 13) 2. Press the . ke y or press the [VOL - - ] key on the r emote com[...]

26 MZ-NF610 Laser P ower Chec k Note: If result of measurement of the laser po wer does not satisfy the specif ication, either replace the OP (optical pick-up unit) or chec k w hether the laser circuit block is working correctly . W hen the result of laser power measurement does not sa tisfy the specif ication e v en though the laser circuit block [...]

27 MZ-NF610 • Overall Adjustment Mode (Title Display) 0 00 Assy** : (Disc mark) At end of po wer supply adjustment: Outside lit ** : Left side = MO ov erall adjustment information F* : MO ov erall adjustment completed 1* : Manual adjustment exists (o verall adj. not completed) 0* : Not adjusted Right side = CD over all adjustment information *F :[...]

28 MZ-NF610 • Adjustment Method of CD and MO Overall Adjustment Mode 1. Set the test mode (see page 13). 2. Press the . ke y or press [VOL - - ] on the remote commander key to activate the overall adjustment mode. 3. Insert CD disc in the set, and press the . key to set the CD overall adjustment mode. Automatic adjustments are made. 4. In case of[...]

29 MZ-NF610 Item No . Description 444 F ocus gain adjustment 445 T racking gain adjustment 434 TWPP gain adjustment 431 TWPP offset adjustment 1 432 TE offset adjustment 2 449 TWPP OP offset adjustment 410 READ → WRITE selection 411 TWPP offset adjustment 1 412 TE offset adjustment 2 418 TWPP OP offset adjustment 490 HCL V LCL V selection process[...]

30 MZ-NF610 Remuse Clear Perform the Resume clear when all adjustments completed. • Resume Clear Setting Method 1. Select the manual mode of the test mode, and set item number 043 (see page 14). 2. Press the X key . 3. Press the x CANCEL/CHG key to return to the test mode (dis- play check mode). 0 43 Res*** Set LCD display 0 43 ResClr r Resume cl[...]

31 MZ-NF610 Rewriting the P atch Data at Replacement of Main Boar d This set requires the patch data in the nonvolatile memory (IC852) to be rewritten using the application, when the MAIN board was replaced. Caution: T he application that meets the microcomputer version in this set must be used when re writing the patch data. Rewriting the patch da[...]

32 MZ-NF610 5. Confirm that the model and version indicated on the title bar coincide with the codes displayed in the Device Name block and the Ve r sion block in the windo w . 6. Click the [Write + Read] button. The patch data writing and the verify processing will be executed automatically in the following order: 1) Writing to patch area (front a[...]

33 MZ-NF610 • Confirmation of contents of the patch data rewrited 1. Click the [READ] button to confirm the contents of the patch data rewrited. 2. The application reads out the front and reverse patch areas and displays the results in the edit box. Confirm that the upper column coincides with the lo wer column as the following windo w . 3. Click[...]

34 MZ-NF610 • Disconnecting the USB cable Disconnect the USB cable as the following procedure after rewriting the patch data and confirmation. Note : W hen the follo wing procedure is not completed but USB cable is extracted, the application does not reco gnize the set at exchan ging of the set. 1. Click the [USB DISCONNECT] button. 2. Confirm th[...]

35 MZ-NF610 Rewriting the NV v alues Caution: T he application that meets the microcomputer version in this set must be used when re writing the NV v alues. Rewriting the NV values using the application not suitable for the microcomputer version could cause the set to malfunction. F or a checking method of the microcomputer ver sion, see “SECTION[...]

36 MZ-NF610 5. Confirm that the model and version indicated on the title bar coincide with the codes displayed in the Device Name block and the Ve r sion block in the windo w . 6. Click the [Write + V erify] button. The NV values writing and the verify processing will be executed automatically in the following order: 1) Writing to Servo 1 area (fro[...]

37 MZ-NF610 7. The operation will terminate with “Compere OK” given to all areas. If “Compere NG” is giv en to any area, the non volatile memory will be f aulty . 8. Click the [USB DISCONNECT] button.[...]

38 MZ-NF610 9. Confirm that the windo w becomes as shown belo w where the [Write + V erify] button is inactiv e. 10. Disconnect the USB cable from the personal computer and the set.[...]

MZ-NF610 39 39 OPTICAL PICK-UP BLOCK LDA FOCUS COIL TRACKING COIL MOTOR/COIL DRIVE IC701 FO2 30 RO2 32 13 11 TRK+ TRK- FCS+ FCS- 28 FI2 RF AMP IC501 11 AVCC2 VREF10 7 ly 56 A 50 B 51 C 52 48 PEAK 50 VC FO1 RO1 D 49 J302 RFI 10 4 AOUT L • Signal Path : PLAYBACK : DIGITAL IN VREF ly lx jy jx A B C D MON GND APC Q501 LDK A-C 16 D-C 15 lx 1 jy 55 jx [...]

MZ-NF610 40 40 Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except f or electrolytics and tantalums. • All resistors are in Ω and 1 / 4 W or less unless otherwise specified. •% : indicates tolerance. • f : inter nal component. • C : panel designation. • A : B+[...]

MZ-NF610 41 41 IC302 IC701 1 20 20 1 4 8 5 1 5 MAIN BOARD (SIDE A) S801 TP309 TP202 R817 LCX-5R (HALF LOCK) CN651 (USB) J302(2/2) (OPTICAL) OPTICAL RECEIVER S803 (OPEN/CLOSE) RVDD VB DTCK KEY_R RADIO_ON RGND J303(2/2) 1 TO SIDE B 1-686-317- 11 (11) C708 R840 12 A B C D E F G H I 3456789 1 0 1 1 6-3. Printed Wiring Board – MAIN Boar d (Side A) –[...]

MZ-NF610 42 42 IC651 IC852 IC801 IC501 IC361 IC601 IC901 IC951 * MAIN BOARD (SIDE B) SL804 D806 Q651 TP1655 TP TP1892 TP1913 TP1921 TP1912 TP1910 TP1906 TP1904 TP1903 TP1519 TP1520 TP1901 TP1923 TP1924 TP1902 C905 SL901 TP1893 TP1356 TP1883 TP1884 TP1885 TP1887 C540 C512 R836 TP1836 TP1842 TP1845 TP1837 TP1835 TP1896 TP1807 TP1736 TP1721 TP1716 TP1[...]

MZ-NF610 43 43 6-5. Schematic Diagram – MAIN Boar d (1/4) – • See page 40 for W av eforms. • See page 49 and 51 for IC Bloc k Diagrams . IC601 Q605 Q604 W602 W601 Q603 L603 L602 C613 C627 C628 Q654 C661 Q653 L651 C658 Q652 D652 C966 TH951 W903 W902 C968 C920 C916 L903 L904 C924 C917 L901 L902 Q901 Q955 C967 C927 C671 C617 C632 D607 D606 TP6[...]

MZ-NF610 44 44 6-6. Schematic Diagram – MAIN Boar d (2/4) – • See page 40 for W av eform. • See page 48 and 50 f or IC Block Diag rams. C526 C527 C534 C533 C538 C536 C537 R511 C535 C513 C524 C511 C512 C519 C520 C522 C540 C506 L503 C509 C507 Q501 C505 L504 C510 IC701 R702 R706 R705 R704 TP1537 TP1520 TP1521 R505 C518 R504 TP1539 TP518 C523 T[...]

MZ-NF610 45 45 6-7. Schematic Diagram – MAIN Boar d (3/4) – • See page 40 for W av eforms. • See page 52 for IC Pin Function Description. C841 S801 C819 S803 S806 C827 C835 C826 C825 C818 C838 C837 C817 C821 C852 C802 C808 C801 R855 C803 D805 D80 6 TP1205 TP1105 TP1846 TP1844 TP1842 TP1840 TP1839 TP1838 TP1837 TP1836 TP1835 TP1834 TP1833 TP[...]

MZ-NF610 46 46 6-8. Schematic Diagram – MAIN Boar d (4/4) – • See page 40 for W av eforms. • See page 47 for IC Bloc k Diagrams . C366 C112 C212 Q361 C362 D302 R102 R306 R305 R304 R307 R303 R302 R857 TP1881 R849 R850 Q871 R847 R873 R845 R860 R846 L302 R309 R308 R315 FB2 C365 C264 R265 C164 C363 R165 R164 R163 R264 R263 R262 R162 R261 R161 C[...]

47 MZ-NF610 8 7 6 5 ADC CONTROL REGISTER I/F AUDIO I/F CONTROLLER HPF CLOCK DIVIDER VD VA AGND VCOM 1 2 3 4 LIN1 LIN2 RIN1 RIN2 16 PDN 15 CSN 14 CCLK 13 CDTI 11 MCLK 10 BCLK 9 STDD 12 LRCK IPGA • IC Block Dia grams IC302 AK5354VT -E2 IC361 T A2131FL (EL) V REF MT SW BST SW BEEP 19 20 21 22 23 24 18 17 16 15 14 13 PW SW 12 11 10 8 7 BST1 9 BST2 6 [...]

48 MZ-NF610 1 IX 2 PS 3 EQ 4 A GND 5 OFC-C1 6 OFC-C2 7 VREF10 8 VC 9 RFO 10 VREF09 11 AVCC2 AVCC2 AVCC AVCC2 12 PD-NI 13 PD-I 14 PD-O D-C A-C SCF1(NC) SMON ADIP-IN SCF2(NC) REXT(NC) WPP-LPF ADFG CON CCSL2 CLK CPGND CN 56 55 54 53 52 51 50 49 48 PEAK/ BOTM 47 46 45 42 FE 41 ABCD 40 RFI 39 ASSY 37 EFMO DGND RESET 34 VGIN 33 SBUS 32 SCK CPOUT CP DVCC [...]

49 MZ-NF610 VG VG3 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 54 55 56 1 53 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 23 25 26 27 28 VB BATM CHGSW RS INP2 INM2 RF2 DCIN CHGMON SVREF GAIN CHG DREG GND SW RECON OE CLK RI FI EFM VIO VC VRECO1 L1_1 PGND1 PGND2 L1_2 VRECO2 VREC DTC INP1 INM1 RF1 DW TP DW BT C[...]

50 MZ-NF610 IC701 SC111258EPR2 14 13 56 55 CPWI2 CPVI2 CPUI2 COM2 RI2 FI2 UI1 PWM1 CPUO1 CPWO1 VG VC 36 37 38 39 40 41 52 51 50 49 48 47 46 45 44 43 42 23 24 25 12 11 10 9 8 7 6 5 4 3 2 1 GND1 OE OE OE CPWO2 CPVO2 CPUO2 PWM2 UI2 VI2 WI2 PGNDW2 WO2 VMVW2 VO2 PGNDUV2 29 30 31 32 33 34 35 UO2 VMU2 VMR2 RO2 PGND2 FO2 VMF2 VI1 WI1 PGNDW1 WO1 WMVW1 VO1 P[...]

51 MZ-NF610 IC951 SC901582EPR2 IC901 SC901580EPR2 1 2 3 4 5 6 7 8 9 10 11 12 18 19 17 16 15 14 24 23 22 21 20 19 DELAY VCR TIME DIVIDER OSC LOGIC SIGNAL RECEIVER VOLTAGE REFERENCE LOGIC SIGNAL RECEIVER VO VREF NSW1 VI2 VI VG N3 N2 N1 VI CAP_C_LIM VI2DET A/D I_SEL AD_SEL VI2 RF1 PGND I_CTL1 I_CTL2 WK_DET PWR_WAKE VREF VREF SW4 SW5 SW6 NSW4 NSW3 BATT[...]

52 MZ-NF610 6-9. IC Pin Function Description • IC801 CXD2680-203GA (SYSTEM CONTR OLLER, DIGIT AL SIGNAL PR OCESSOR) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 I/O I O O O O O O I I I O I O I I I I I I O I I I I I I I I O O O O O O O O O O O I[...]

53 MZ-NF610 Pin No. 51 52 53 54 55 56 57 58 59 60 61 62, 63 64 to 66 67 68 69 70 71 72 73 74 75 76 77 78 to 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 I/O I O O O O I I I I — O — O O O O O O I I/O O O O O — — — I I I I I I O O O O O I I O O I O O O O O O O Pin Name ADDT KRCK XBCK FS256 NC NC L[...]

54 MZ-NF610 Pin No. 111 112 113 114, 115 116 117 118 119, 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139, 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154, 155 156 157 158 159 160 161 162, 163 164 165 I/O O O O O O O O O I O O O O O O O I O I I I O O I I O O O O O O O O O O O O I I I O I/O O I I I I I I I[...]

55 MZ-NF610 Pin No. 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195, 196 197 198 199 200 201 202 to 204 205, 206 207 208 209 210 211 212 213 214, 215 216 to 231 232 to 245 246 247 248 I/O I I I I I I I I I/O I/O I/O O O I O I O I/O I O I/O O O O I I I I I O I O O O O O O I I I [...]

56 MZ-NF610 Pin No. 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 I/O — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — ?[...]

57 MZ-NF610 Pin No. 299 300 301, 302 303, 304 305 306 to 312 I/O — — — — — — Pin Name FVDD0 FVSS0 DVDD5, 6 DRAMVDD3, 4 MSAK NC Description Power supply terminal (for the built-in flash memory) Ground terminal (for the built-in flash memory) Power supply terminal Power supply terminal (for DRAM) Not used (open) Not used (open)[...]

58 MZ-NF610 7-1. Case Section SECTION 7 EXPLODED VIEWS • Items marked “*” are not stocked since the y are seldom required for routine service. Some delay should be anticipated when ordering these items. •A bbre viation CND : Canadian model NO TE: • -XX and -X mean standardized parts, so they may hav e some difference from the original one[...]

59 MZ-NF610 7-2. Chassis Section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark MT -MZN710-177 not supplied MAIN board section 51 51 53 54 56 57 57 58 59 60 61 55 51 3-237-072-01 SCREW (MD), STEP 53 X-3382-628-1 CHASSIS ASSY , SET 54 3-249-532-01 SPRING (POP UP-L), TORSION 55 3-237-083-01 SPRING (POP UP-R), TORSION 56 3-2[...]

60 MZ-NF610 7-3. MAIN Board Section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 101 102 103 105 106 107 104 101 3-246-247-01 CASE, BA TTERY 102 3-237-073-01 TERMINAL BOARD (+), BA TTERY 103 3-237-074-11 TERMINAL (–), BA TTERY * 104 A-3683-780-B MAIN BOARD, COMPLETE (US) * 104 A-3683-783-B MAIN BOARD, COMPLETE (CND) 1[...]

61 MZ-NF610 7-4. Mechanism Deck Section-1 (MT -MZN710-177) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark mechanism deck section- 2 301 not supplied 31 1 310 309 308 307 305 304 303 302 306 A A 301 X-3381-219-1 HOLDER ASSY 302 3-224-779-02 SPRING, THRUST DETENT 303 3-225-996-01 SCREW (M1.4) (EG), PRECISION P AN 304 4-222-[...]

62 MZ-NF610 7-5. Mechanism Dec k Section-2 (MT -MZN710-177) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark M601 M603 351 351 362 361 360 359 352 353 354 355 356 365 357 358 M602 not supplied 363 364 351 3-225-278-12 SCREW , T APPING 352 3-235-838-01 COVER, MOTOR 353 3-235-836-01 GEAR (HB) 354 3-222-544-01 GEAR (HA) 355 3-[...]

63 MZ-NF610 SECTION 8 ELECTRICAL P ARTS LIST Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark NO TE: • Due to standardization, replacements in the parts list may be diff erent from the parts speci- f ied in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may hav e some diffe[...]

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 64 MZ-NF610 C658 1-137-739-91 T ANT ALUM 22uF 20% 6.3V C659 1-164-937-11 CERAMIC CHIP 0.001uF 10.00% 50V C660 1-164-939-11 CERAMIC CHIP 0.0022uF 10.00% 50V C661 1-137-934-91 T ANT AL. CHIP 47uF 20% 10V C671 1-125-777-11 CERAMIC CHIP 0.1uF 10.00% 10V C673 1-125-777-11 CERAMIC [...]

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 65 MZ-NF610 < FUSE > 0 F1 1-576-462-21 FUSE (SMD) 1.5A 63V 0 F301 1-576-439-21 FUSE (SMD) 0.25A 125V < CONDUCTOR > FB1 1-216-864-11 MET AL CHIP 0 5% 1/10W FB2 1-216-864-11 MET AL CHIP 0 5% 1/10W FB301 1-216-864-11 METAL CHIP 0 5% 1/10W FB302 1-216-864-11 METAL CHI[...]

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 66 MZ-NF610 R312 1-218-989-11 RES-CHIP 1M 5% 1/16W R315 1-218-990-11 SHORT CHIP 0 R361 1-218-937-11 RES-CHIP 47 5% 1/16W R362 1-218-981-11 RES-CHIP 220K 5% 1/16W R363 1-218-969-11 RES-CHIP 22K 5% 1/16W R364 1-218-965-11 RES-CHIP 10K 5% 1/16W R501 1-218-977-11 RES-CHIP 100K 5%[...]

Ref. No. Part No. Description Remark 67 MZ-NF610 R963 1-218-973-11 RES-CHIP 47K 5% 1/16W R965 1-218-977-11 RES-CHIP 100K 5% 1/16W R966 1-218-965-11 RES-CHIP 10K 5% 1/16W R967 1-218-989-11 RES-CHIP 1M 5% 1/16W R969 1-218-957-11 RES-CHIP 2.2K 5% 1/16W R971 1-218-961-11 RES-CHIP 4.7K 5% 1/16W R974 1-245-455-21 MET AL 0.47 1% 1/5W R975 1-218-981-11 RES[...]

MZ-NF610 REVISION HIST OR Y Clicking the ver sion allows you to jump to the re vised page. Also, clicking the v ersion at the upper right on the re vised page allows you to jump to the ne xt revised page. Ve r. Date Description of Revision 1.0 2003.03 Ne w[...]