Soleus Air SG-TTW-09ESE-26 инструкция обслуживания

Electronic Through the W all Air Conditioner Operating Instructions Models SG-TTW -09ESE-26 SG-TTW -12ESEZ-26 SG-TTW -09HC-26 SG-TTW -12HC-26[...]

Content s IM P OR T AN T N OT E T O TH E OW NER ....... ....... ....... ...... 1 IM POR T AN T NO TE T O TH E SER VI CER ........ ....... ....... . 1 Unit Fea ture s ................................................................ 1 T ransport ation Damage .............................................. 1 Unpacki ng The Unit ........................[...]

Specifications • Noise level is measured at a distance of 3.28ft away from the front of the unit in cooling mode. • Power consumption is measured when the fan runs at the highest speed settings. • These specifications are for reference only. For actual data, please refer to the rating label on the unit. Model Number SG-TTW-09ESE-26 SG-TTW- 09[...]

IMPORT ANT NOTE TO THE OWNER This equipment is to be serviced by professionally trained personnel only. If this equipment is improperly installed, adjusted or altered by an unqualified person, a safety hazard may result. IMPORT ANT NOTE TO THE SER VICER Read this manual and familiarize yourself with the specific items which must be adhered to befor[...]

WARNING To prevent electrical shock, property damage, personal injury, or death, do not remove grounding prong from plug. Follow all operating instructions. Installation Instructions To ensure that the unit operates safely and efficiently, it must be installed, operated, and maintained according to these installation and operating instructions and [...]

Figure 3 3. Remove shipping pads inside air conditioner next to compressor. (See Figure B.) Remove shi pping pads Figure B 4. Carefully slide the chassis into the sleeve. Ensure that the ground wire is not pinched or in the path of the condenser fan. 5. Loosen locking plate screw and rotate tab with tab behind wall case flange (See Figure C) then t[...]

T a b To replace front grille: Hook the tabs on the front grille even with the tabs on the case and snap into place. Replace the screws and filter. Refer to Page 4, Figure A. VENT CONTROL AND AIR DIRECTION (See Figure E) The vent control is located behind the front grille on the right side of the air discharge area. When set at CLOSE only the air i[...]

DISCHARGE AIR GRILLE Remove the front grille to adjust the vertical louvers side-to- side to direct the air left or right. Figure 5 IMPORTANT NOTES: 1. The unit is equipped with a rubber-grommet-mounted compressor. These grommets are factory set and require no adjustment. 2. Obstruction to air flow must be checked and removed. Check the indoor and [...]

Air Conditioner Features LOWERS TEMPERATURE OR TIME RAISES TEMPERATURE OR TIME SETS FAN SPEED SETS MODE SLEEP MODE LOWERS TEMPERATURE OR TIME RAISES TEMPERATURE OR TIME SETS FAN SPEED SETS MODE DISPLAYS TEMPERATURE/TIME TURNS UNIT ON OR OFF TIMER DISPLAYS TEMPERATURE/TIME TURNS UNIT ON OR OFF TIMER SLEEP MODE &22/81,7 ELECTRONIC CONTROL OPER[...]

OPERA TING THE REMOTE CONTROL • The swing bu tton turns on louv er oscillation. • Press the ON/OFF button to turn the A/C on or off. When t he unit is turned off, the Timer and slee p functions will be cancelled. The set temperat u re will be saved. • Press the MODE button to change the operating mode. You c an choose AUTO, COOL, SAVE (energy[...]

OPERA TING THE REMOTE CONTROL • Press the “+” button to increase the temperature w h en the unit is on. Press and hold the “+” b utton for more than 2 seconds to q uickly cycle through the temperature options. Stop pressing th e b utton when the desired temperatu re is displayed. Th e temperature cannot be set in auto mode. Temperature ra[...]

Introduction for special function 1 . To power on the unit , pr es s the O N/ OF F b u tt on. Th e u ni t w il l st ar t t o r un . ( N ot e: Wh en it is powered off, the louvers will close automatically.) 2. Pr e s s MO DE b ut to n , se l ec t de si r ed r u n ni ng m od e , o r p re ss CO OL o r H EA T mode to enter into the corresponding operat[...]

Air Conditioner Features (continued) TO TURN UNIT ON: YOU WILL SEE: DO THIS: PRESS ON/OFF BUTTON TO CHANGE TEMPERATURE SETTING: YOU WILL SEE: DO THIS: PRESS TO RAIS E PRESS TO LOWE R ° ° If you want the display to read the actual room temperature, s elect the F an O nly mode. YOU WILL SEE THE TO CHANGE F AN SPEEDS: LIGHT ON SPEED CHOSEN: DO THIS:[...]

YOU WILL SEE : T O O PER A T E O N F A N O N L Y : DO THIS: PRESS MODE BUT T ON CHOOSE F A N ON L Y LIGHT ON Note: Use this function only when cooling is not desired but room air circulation is needed. You can choose any fan speed you prefer, EXCEPT AUTO FAN. During this function, the display will show the current room temperature, not the set temp[...]

Air Conditioner Features (continued) HEA TING FEA TURE (on some models) : YOU WILL SEE : If the display reads “ F 1 ” a sensor has failed. If the display reads “ F 2 ” a sensor has failed. If the display reads “ F 4 ” a sensor has failed. If the display reads “ F J ” a sensor has failed. DO THIS: PRESS MODE BUTT ON SELECT HEA T Note[...]

COMPRESSOR The compressor is hermetically sealed, permanently lubri- cated and requires no additional oiling. FRONT PANEL AND GRILLE The front panel and grille can be cleaned with a mild soap or detergent. Do not use hydrocarbon-based cleaners (e.g. acetone, benzene, naphtha, gasoline, etc.) to clean the front panel or grille. Use care when cleanin[...]

W ARRANTY One Year Limited Warranty Soleus International, Inc. warrants the accompanying Soleus Air Powered by Gree Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE ( 1) year from the date of original retail purchase in the United States. If the unit ex[...]